RESUMEN
Wheat bran (WB) is a well-known and valuable source of dietary fiber. Arabinoxylan (AX) is the primary hemicellulose in WB and can be isolated and used as a functional component in various food products. Typically, AX is extracted from the whole WB using different processes after mechanical treatments. However, WB is composed of different layers, namely, the aleurone layer, pericarp, testa, and hyaline layer. The distribution, structure, and extractability of AX vary within these layers. Modern fractionation technologies, such as debranning and electrostatic separation, can separate the different layers of WB, making it possible to extract AX from each layer separately. Therefore, AX in WB shows potential for broader applications if it can be extracted from the different layers separately. In this review, the distribution and chemical structures of AX in WB layers are first discussed followed by extraction, physicochemical properties, and health benefits of isolated AX from WB. Additionally, the utilization of AX isolated from WB in foods, including cereal foods, packaging film, and the delivery of food ingredients, is reviewed. Future perspectives on challenges and opportunities in the research field of AX isolated from WB are highlighted.
Asunto(s)
Fibras de la Dieta , Xilanos , Xilanos/química , Fibras de la Dieta/análisisRESUMEN
In this study, as-is (ca. 12% moisture by mass) and hydrated (50% water by mass) granules of waxy potato (WP), waxy wheat (WW), waxy maize, normal maize, and high-amylose maize (HAM) starches were investigated by using small-angle neutron and X-ray scattering (SANS and SAXS), wide-angle X-ray scattering, and ultra-small-angle neutron scattering. The SANS and SAXS data were fitted using the two-phase stacking model of alternating crystalline and amorphous layers. The partial crystalline lamellar structures inside the growth rings of granules were analyzed based on the inter-lamellar distances, thicknesses of the crystalline lamellae and amorphous layers, thickness polydispersities, and water content in each type of layer. Despite having a longer average chain length of amylopectin, the WP and HAM starches, which had B-type allomorph, had a shorter inter-lamellar distance than the other three starches with A-type allomorph. The WP starch had the most uniform crystalline lamellar thickness. After hydration, the amorphous layers were expanded, resulting in an increase of inter-layer distance. The low-angle intensity upturn in SANS and SAXS was attributed to scattering from interfaces/surfaces of larger structures, such as growth rings and macroscopic granule surfaces. Data analysis methods based on model fitting and 1D correlation function were compared. The study emphasizedâowing to inherent packing disorder inside granulesâthat a comprehensive analysis of different parameters was essential in correlating the microstructures with starch properties.
Asunto(s)
Amilosa , Almidón , Amilosa/química , Dispersión del Ángulo Pequeño , Difracción de Rayos X , Almidón/química , Amilopectina/química , Agua/químicaRESUMEN
Wheat bran, the main by-product of dry milling of wheat, is currently mainly used in the animal feed industry, but has attracted attention as a food ingredient owing to its high dietary fiber and phytochemical contents, providing excellent physiological effects. The bran layers (aleurone layer, outer pericarp and intermediate layer) contain different compositions, structures, and nutrients, and have different properties. Each layer, when separated and isolated, potentially could find more extensive applications in foods. This triggered interest in isolating the bran layers using milling and wet- or dry-fractionation techniques based on their chemical or physical properties. The recent progress has allowed the production of commercial products from wheat bran layers, particularly aleurone-rich products, enhancing the value of wheat bran layers and their applications in food. The present review highlights the recent advances in studying the chemical composition including distribution of chemical components, physical structure, biopolymer matrix, and physicochemical properties of each wheat bran layer. Technologies to fractionate wheat bran layers and utilization of different bran layers in foods are discussed and reviewed, providing new strategies for improving the value of wheat bran and utilization of wheat bran in foods.
RESUMEN
BACKGROUND: Lipids account for 2.0-2.5% of wheat flour by dry weight and affect properties and quality of cereal foods. A new method was developed to extract non-starch lipids from wheat flour. Wheat flour was first hydrolyzed with a protease and followed by extraction of non-starch lipids by water-saturated butanol (WSB). RESULT: Protein hydrolysis by protease followed by extraction of non-starch lipids with WSB increased yield to 1.9 ± 0.3% from 1.0 ± 0.1% with no protease treatment. The lipid profile showed a significant increase in phospholipid compounds extracted with protease hydrolysis (5.9 ± 0.8 nmol·g-1 ) versus without enzymatic treatment (2.4 ± 1.3 nmol g-1 ). CONCLUSION: Improved lipid extraction yield and phospholipid compounds following protease-assisted extraction method provided additional insight towards the understanding of protein-lipid interaction in wheat flour. The new protease-assisted extraction method may be applied to analyzing non-starch lipids in other types of wheat flours and other cereal flours. © 2021 Society of Chemical Industry.
Asunto(s)
Harina , Triticum , Lípidos/química , Péptido Hidrolasas , Almidón/química , Triticum/químicaRESUMEN
BACKGROUND: Resistant starch (RS) has health benefits and can be used as a functional ingredient in various food products. Kansas hard red winter (HRW) wheat is conventionally used for bread making and this is attributed to its strong gluten network. To develop Asian white salted noodles with a high RS content, HRW wheat flour was partially replaced with cross-linked phosphorylated RS4 wheat starch. Vital wheat gluten or wheat protein isolate was added to compensate for textural changes due to the addition of RS. RESULTS: The maximum recommended level of RS4 starch to replace HRW wheat flour was 40%. The substitution of 10-40 parts of RS4 for flour did not change hardness in cooked noodles but it did reduce their extensibility, cohesiveness, and springiness, which was probably due to the non-swelling properties of RS4. At 40 parts of RS4 replacement, supplementation of 2-8 parts of vital wheat gluten or wheat protein isolate in the composite flour notably enhanced the hardness and extensibility of cooked noodles, whereas cohesiveness and springiness were minimally affected. Supplemental vital wheat gluten produced a thicker protein network than endogenous protein or added wheat protein isolate, giving cooked noodles greater breaking force and distance. CONCLUSION: RS4 could be used as a functional ingredient to replace up to 40% of hard wheat flour for making Asian noodles while maintaining their hardness after cooking. The extensibility of cooked noodles with high RS4 could be noticeably enhanced by supplementation with vital wheat gluten in the composite flour (RS/flour = 40/60). © 2020 Society of Chemical Industry.
Asunto(s)
Harina/análisis , Manipulación de Alimentos/métodos , Almidón/química , Triticum/química , Pan/análisis , Culinaria , Glútenes/química , Dureza , Fosforilación , Triticum/clasificaciónRESUMEN
Citric acid is the world's largest consumed organic acid and is widely used in beverage, food and pharmaceutical industries. Aspergillus niger is the main industrial workhorse for citric acid production. Since the release of the genome sequence, extensive multi-omic data are being rapidly obtained, which greatly boost our understanding of the citric acid accumulation mechanism in A. niger to a molecular and system level. Most recently, the rapid development of CRISPR/Cas9 system facilitates highly efficient genome-scale genetic perturbation in A. niger. In this review, we summarize the impact of systems biology on the citric acid molecular regulatory mechanisms, the advances in metabolic engineering strategies for enhancing citric acid production and discuss the development and application of CRISPR/Cas9 systems for genome editing in A. niger. We believe that future systems metabolic engineering efforts will redesign and engineer A. niger as a highly optimized cell factory for industrial citric acid production.
Asunto(s)
Aspergillus niger/genética , Aspergillus niger/metabolismo , Ácido Cítrico/metabolismo , Genoma Fúngico , Ingeniería Metabólica , Sistemas CRISPR-Cas , Edición Génica , Genómica , Microbiología Industrial , Biología de SistemasRESUMEN
BACKGROUND: Heat-moisture treatment (HMT) has been used to modify properties of sorghum starches. However, information is limited on the effects of HMT on the digestibility of starch and the concurrent changes in protein in sorghum flour. The objectives of this research were to identify heat-moisture conditions to increase the resistant starch (RS) content of sorghum flour and investigate changes in sorghum proteins and starch structure. RESULTS: Sorghum flours with different moisture contents (0, 125, 200, and 300 g kg-1 w.b.) were heated at three temperatures (100, 120 and 140 °C) and times (1, 2 and 4 h). HMT of sorghum flour increased its RS level. The flour treated at 200 g kg-1 moisture and 100 °C for 4 h had a high RS content (221 g kg-1 vs. 56 g kg-1 for the untreated flour). Starch was not gelatinized when sorghum flours heated at moisture content of 200 g kg-1 or below. Sorghum protein digestibility and solubility decreased during HMT. The increase in RS of sorghum flour upon HMT was attributed to enhanced amylose-lipid complexes and heat induced structural changes in its protein fraction. CONCLUSION: HMT can be used to increase RS content in sorghum flour without gelatinizing its starch, thereby providing sorghum flour with unique food applications. © 2017 Society of Chemical Industry.
Asunto(s)
Proteínas en la Dieta/metabolismo , Digestión , Calor , Sorghum/química , Almidón/metabolismo , Amilosa/química , Lípidos/química , Solubilidad , Agua/análisisRESUMEN
The importance of gastric digestion in starch-based emulsion is often overshadowed compared to intestinal digestion, despite acknowledging the activity of salivary α-amylase in the stomach. This study aimed to address this gap by investigating the digestion of starch-based emulsions through orogastrointestinal digestion experiments. Our observations revealed the crucial role of salivary α-amylase, which hydrolyzed â¼8 %, â¼56 %, and â¼ 28 % of starch in emulsions stabilized by octenylsuccinylated maize starch (OMS-E), gelatinized OMS (GOMS-E), and retrograded OMS (ROMS-E), respectively, during the gastric phase. Consequently, â¼23 % of the oil in GOMS-E underwent lipolysis during this phase, whereas â¼13 and â¼ 6 % of the oil was lipolyzed in OMS-E and ROMS-E, respectively. These phenomena significantly influenced their small intestinal digestion and the bioaccessibility of encapsulated curcumin. Notably, GOMS-E exhibited â¼28 % lower curcumin bioaccessibility than that of curcumin encapsulated in OMS-E or ROMS-E. This difference was attributed to premature gastric digestion and subsequent encapsulant release in the case of GOMS-E. This understanding can be utilized to manipulate the delivery and digestion of starch-based emulsions. Importantly, our findings highlight the necessity of considering gastric amylolysis and lipolysis when investigating the gastrointestinal fate of starch-based emulsions.
Asunto(s)
Curcumina , alfa-Amilasas Salivales , Emulsiones , Almidón , Estómago , Digestión , Tamaño de la PartículaRESUMEN
The molecular structure and conformation of arabinoxylan-protein gum, commonly referred as corn fiber gum (CFG) were analyzed by high-performance size-exclusion chromatography (HPSEC) coupled with RI, UV, light scattering and viscometer detectors. CFG had a heterogeneous structure. The detailed conformation of CFG at different molecular weights was compared with that of hemicellulose fiber gum (HFG) from dried distiller's grains with solubles and gum arabic. The CFG molecules mainly had random coil conformation; only 10 % of them exhibited rigid rod conformation. Approximately 80 % of the CFG had a molecular weight between 105 and 105.4 Da, while the other 20 % of molecules were between 105.4 and 1.5 × 107.7 Da. The overall conformational properties of CFG and HFG were closer but differed from that of gum arabic. The intrinsic viscosity and radius of gyration of both CFG and HFG were greater than those of gum arabic although the average molecular weight of CFG and HFG was lower. The protein and carbohydrate were covalently linked in CFG molecules as shown by the HPSEC-multiple detectors combined with partial acid hydrolysis. Based on the detailed conformation of CFG and the methylation analysis, 1D and 2D NMR spectroscopy results, the molecular structure of CFG was proposed.
Asunto(s)
Goma Arábiga , Zea mays , Zea mays/química , Xilanos/química , Estructuras de las Plantas , Fibras de la DietaRESUMEN
High-amylose maize starch (69.3 % amylose) was debranched to increase the level of linear molecules and enhance the formation of spherulites. Debranched high-amylose maize starch (25 %, w/w) was heated to 180 °C in a Parr reactor followed by crystallization at different temperatures between 25 and 150 °C. The objectives of this study were to investigate the effects of crystallization temperature on the yield, morphology, structure, crystallinity, and digestibility of the spherulites formed. When the crystallization temperature was 150 °C, spherulites with negative birefringent sign were formed. High crystallization temperature caused molecular degradation and the degree of degradation was severe at 150 °C, resulting in relatively short chain amylose (DP < 150). When crystallized at 25 to 120 °C, spherulites with strong positive birefringence were produced. The long chain amylose was attributed to the positive birefringence. All spherulites had a predominant B-type crystalline structure. The spherulites with negative birefringence showed a lower degree of crystallinity and lower resistance to enzyme digestion, but all the spherulites with positive birefringence had a high resistant starch content (89-94 %). α-Amylase was not able to penetrate inside the spherulites as revealed by the confocal laser scanning microscopic images.
Asunto(s)
Amilosa , Cristalización , Zea mays , Zea mays/química , Amilosa/química , Almidón/química , Temperatura , HidrólisisRESUMEN
Wheat starch contains two distinct groups of granules, A-type and B-type, which have different compositions and properties. The aim of this study was to investigate the differences in pasting properties of A- and B-type wheat starch granules and their annealed starches, and to relate them to swelling properties and solubility. A- and B-type wheat starch granules were fractionated. The differences in pasting properties between A- and B-type wheat starch granules depended on starch solids content. The A-type starch had a higher pasting viscosity at ≥8 % solids content, but the trend was reversed at a lower solids content (5 %). This cross-over phenomenon in the pasting viscosity can be explained because A-type wheat starch granules have more starch molecules leached out, while swelled less at high temperatures and are probably more rigid than B-type wheat starch granules. This is the first study to show the cross-over in the pasting viscosity-starch concentration between A-type and B-type wheat starches and that B-type wheat starch has higher pasting viscosity than A-type at a low solids content. When annealed in warm water, both annealed A- and B-type wheat starch granules had higher pasting viscosities than untreated counterparts by altering the swelling of starch.
Asunto(s)
Almidón , Triticum , Solubilidad , Viscosidad , AguaRESUMEN
This study aimed to enhance the resistance of bread to gastrointestinal digestion by partially substituting wheat flour with starch spherulites. Three types of starch spherulites, specifically A-type (exhibiting an A-type crystalline pattern with mostly positive birefringence), B(-)-type (B-type crystalline with negative birefringence), and B(+)-type (B-type crystalline with positive birefringence), were investigated. The A-, B(-)-, and B(+)-type spherulites showed significantly higher resistant starch contents of 63.5, 63.8, and 89.2 %, respectively, compared to the control wheat flour (7.4 %). The melting temperatures of A-type and B(+)-type spherulites were notably higher than those of the control wheat flour, suggesting the potential preservation of certain enzyme-resistant starch during the baking process. The partial substitution of wheat flour with spherulites resulted in a denser crumb structure, increased bread hardness and chewiness, and a pale brown color in the case of B(+)-type spherulite. However, these variations in physicochemical properties did not significantly impact consumer acceptability. Remarkably, in bread containing A- or B(+)-type spherulite, residual ordered spherulite structures were present after baking, as confirmed by differential scanning calorimetry. This resulted in significantly lower digestibility during in vitro gastrointestinal digestion. These findings are useful for the rational design of bread with sustained glucose release during gastrointestinal digestion.
Asunto(s)
Pan , Digestión , Harina , Almidón , Triticum , Pan/análisis , Almidón/química , Almidón/metabolismo , Digestión/fisiología , Harina/análisis , Triticum/química , Tracto Gastrointestinal/metabolismo , HumanosRESUMEN
Starches are hydrolyzed into monosaccharides by mucosal α-glucosidases in the human small intestine. However, there are few studies assessing the direct digestion of starch by these enzymes. The objective of this study was to investigate the changes in the structure and enzyme binding of starches during in vitro hydrolysis by mammalian mucosal enzymes. Waxy maize (WMS), normal maize (NMS), high-amylose maize (HAMS), waxy potato (WPS), and normal potato (NPS) starches were examined. The order of the digestion rate was different compared with other studies using a mixture of pancreatic α-amylase and amyloglucosidase. NPS was digested more than other starches. WPS was more digestible than WMS. Hydrolyzed starch from NPS, NMS, WPS, WMS, and HAMS after 24 h was 66.4, 64.2, 61.7, 58.7, and 46.2 %, respectively. Notably, a significant change in the morphology, reduced crystallinity, and a decrease in the melting enthalpy of the three starches (NPS, NMS, and WPS) after 24 h of hydrolysis were confirmed by microscopy, X-ray diffraction, and differential scanning calorimetry, respectively. The bound enzyme fraction of NPS, NMS, and WPS increased as hydrolysis progressed. In contrast, HAMS was most resistant to hydrolysis by mucosal α-glucosidases in terms of digestibility, changes in morphology, crystallinity, and thermal properties.
Asunto(s)
Almidón , alfa-Glucosidasas , Humanos , Animales , Hidrólisis , Amilosa , Rastreo Diferencial de Calorimetría , Ceras , Zea mays , MamíferosRESUMEN
To develop recyclable biocatalyst used in Pickering interfacial systems, the pH-responsive monomer [2-(dimethylamine)ethyl methacrylate] (DMAEMA) was grafted onto the maize starch molecule via free radical polymerization. Subsequently, combined with the gelatinization-ethanol precipitation and lipase (Candida rugosa) absorption process, an enzyme-loaded starch nanoparticle with DMAEMA grafting (D-SNP@CRL) was tailor-made, showing a nanometer size and regular sphere. X-ray photoelectron spectroscopy and confocal laser scanning microscopy confirmed a concentration-induced enzyme distribution within D-SNP@CRL, thereof the outside-to-inside enzyme distribution was proved to be optimum in achieving the highest catalytic efficiency. Benefited from the tunable wettability and size of D-SNP@CRL under pH variation, the generated Pickering emulsion could be readily applied as the recyclable microreactors for the n-butanol/vinyl acetate transesterification. This catalysis exhibited both highly catalytic activity and good recyclability, making the enzyme-loaded starch particle a promising green and sustainable biocatalyst in the Pickering interfacial system.
RESUMEN
Pyrodextrins were prepared by heating waxy maize starch for 4 h at pH 3 & 150 °C, pH 3 & 170 °C, and pH 2 & 150 °C. Those pyrodextrins were soluble in water at 25 °C, but insoluble in glycerol. The objectives of this study were to investigate dissolution of the pyrodextrins in glycerol/water mixtures, and to determine how crystallinity and birefringence of the pyrodextrins were affected by swelling. Pyrodextrins prepared at pH 3 & 170 °C and pH 2 & 150 °C either dissolved or swelled little in glycerol/water mixtures at 25 °C. In contrast, the pyrodextrin prepared at pH 3 & 150 °C, which showed the least depolymerization, swelled in 40% glycerol to increase granule diameter ~80%. Despite that significant swelling, those swollen granules still displayed a Maltese cross pattern but were amorphous, demonstrating the separation of loss of crystallinity from loss of birefringence.
Asunto(s)
Almidón , Zea mays , Birrefringencia , Glicerol , Solubilidad , Agua , CerasRESUMEN
In vitro digestibility of starch in sorghum grains differing in endosperm hardness and flour particle size was investigated. The starch digestibility increased as the particle size of flour decreased, but no clear trend was observed in digestibility of starch in sorghum flours milled from grains with different hardness. The protein matrix affected the digestion of starch. The pH value (2.0 vs. 1.3) was a critical factor affecting protein digestion. Optimum pH (pH 2.0 for pepsin) digested more protein, resulting in a greater digestion of starch. Resistant starch (RS) content was 8.5-26.3% in isolated sorghum starch but higher (10.6-29.5%) in sorghum flours. Protein digestibility decreased after cooking while starch digestibility increased compared to native sorghum flours; disulfide bonds formed between protein molecules. RS content of cooked sorghum flour was much higher without pepsin treatment (16.93-23.99%) than that of cooked sorghum flour with pepsin treatment (4.86-12.53%).
Asunto(s)
Harina , Sorghum , Digestión , Grano Comestible/metabolismo , Endospermo/metabolismo , Harina/análisis , Dureza , Tamaño de la Partícula , Pepsina A/metabolismo , Proteolisis , Sorghum/química , Almidón/químicaRESUMEN
In-depth molecular structure and properties of cassava-derived resistant maltodextrins (RMDs) were determined. Cassava starch was dextrinized with 0.04% or 0.06% HCl at 120 °C for 60-180 min to obtain resistant dextrins (RDs), which were further hydrolyzed by α-amylase to produce RMDs. Prolonging dextrinization duration decreased proportion of α-1,4 linkages and α-/ß-reducing ends but increased fraction of indigestible α-/ß-1,6, ß-1,4, ß-1,2 linkages, degree of branching (DB), degree of polymerization, relative molecular weight, and total dietary fiber (TDF) content of the RMDs. Moreover, RMDs had greater proportion of ß-glycosidic linkages, α-/ß-reducing end, DB, TDF, and low molecular weight dietary fiber (LMWDF) content than their RD counterparts. Potential prebiotic activity score was higher in RMDs with abundant LMWDF fraction but low DB. Slight difference in the glass transition temperature of maximally freeze-concentrated unfrozen phase (Tg') and unfrozen water content was found among RMDs. However, RMDs had lower Tg' than their RD counterparts.
Asunto(s)
Manihot , Estructura Molecular , Polisacáridos , AlmidónRESUMEN
Photoperiod sensitive (PS) sorghum, with high soluble sugar content, high mass yield and high drought tolerance in dryland environments, has great potential for bioethanol production. The effect of diluted sulfuric acid pretreatment on enzymatic hydrolysis was investigated. Hydrolysis efficiency increased from 78.9 to 94.4% as the acid concentration increased from 0.5 to 1.5%. However, the highest total glucose yield (80.3%) occurred at the 1.0% acid condition because of the significant cellulose degradation at the 1.5% concentration. Synchrotron wide-angle X-ray diffraction was used to study changes of the degree of crystallinity. With comparison of cellulosic crystallinity and adjusted cellulosic crystallinity, the crystalline cellulose decreased after low acidic concentration (0.5%) applied, but did not change significantly, as the acid concentration increased. Scanning electron microscopy was also employed to understand how the morphological structure of PS sorghum changed after pretreatment. Under current processing conditions, the total ethanol yield is 74.5% (about 0.2 g ethanol from 1 g PS sorghum). A detail mass balance was also provided.
Asunto(s)
Biotecnología/métodos , Sorghum/metabolismo , Ácidos Sulfúricos/farmacología , Biomasa , Celulosa/química , Cristalización , Etanol/química , Fermentación , Hidrólisis , Lignina/química , Microscopía Electrónica de Rastreo/métodos , Fotoperiodo , Sorghum/química , Sincrotrones , Temperatura , Difracción de Rayos XRESUMEN
The objectives of this study were to debranch waxy maize starch by pullulanase, produce spherulites with different crystalline structures and birefringent properties by controlling crystallization conditions and determine how their structures were correlated with their digestibilities. The spherulites formed in water or 50% ethanol at 4 °C without mixing had a B-type crystalline structure. The birefringence sign was not uniform for the spherulites formed in water at 4 °C; some spherulites displayed negative birefringence. However, positive birefringence was observed for the spherulites formed in 50% ethanol at 4 °C, indicating starch chains were radially arranged. The spherulites crystallized in water at 50 °C followed by further crystallization at 4 °C had a predominate A-type crystalline pattern with positive birefringence in some particles, the highest resistant starch content (73.0%) and the highest degree of crystallinity (76%).
Asunto(s)
Almidón/química , Zea mays/química , Amilopectina/química , BirrefringenciaRESUMEN
The conformational properties of pyrodextrins from waxy maize starch were investigated by high performance size exclusion chromatography with multiple detectors, and the relationships (Mark-Houwink equations) between molecular weights and intrinsic viscosities of pyrodextrins in water were established. Pyrodextrin was prepared by adjusting waxy maize starch to pH 3 or 2, heating at 170 °C or 150 °C. As heating time increased from 0.5 to 4 h, the molecular size was decreased in the order of pH 2 and 150 °C > pH 3 and 170 °C > pH 3 and 150 °C. The measured exponent α values in Mark-Houwink equation indicated that the pyrodextrins prepared at pH 3, 170 °C and 150 °C only had one compact spherical conformation (α 0.27-0.31) during dextrinization, whereas the pyrodextrins prepared at pH 2 and 150 °C had a mixture of two shapes of molecules: compact sphere (α 0.26) and rigid coil (α 0.89) conformation.