RESUMEN
At first glance, the amount of water molecules naturally contained in humid air is negligibly small to affect filamentation of ultrashort laser pulses. However, here we show, both experimentally and numerically, that for ultraviolet laser pulses with 248 nm wavelength this is not true. We demonstrate that with increase of air humidity the plasma channels generated by the ultraviolet laser pulses in air become longer and wider, while the corresponding electron density in humid air can be up to one order of magnitude higher compared to dry air.
RESUMEN
The concept of representative directions allows for automatic generation of multi-axial constitutive equations, starting from simplified uni-axial material models. In this paper, a modification of the concept is considered suitable for the analysis of fibrous polymeric materials, which are anisotropic in the as-received state. The modification of the concept incorporates an orientation probability density function (OPDF), which explicitly accounts for the material anisotropy. Two versions of the concept are available. The first version utilizes the homogeneous distribution of the representative directions, with the entire anisotropy being contained in the weighting factors. The second encapsulates the anisotropy in the distribution of the representative directions. Due to its nature, the second version allows for a more efficient use of computational power. To promote this efficient version of the concept, we present new algorithms generating required sets of representative directions that match a given OPDF. These methods are based (i) on the minimization of a potential energy, (ii) on the equilibration method, and (iii) on the use of Voronoi cells. These three methods are tested and compared in terms of various OPDFs. The applicability of the computationally efficient modeling method to mechanical behavior of an anisotropic polymeric material is demonstrated. In particular, a calibration procedure is suggested for the practically important case when the OPDF is not known a-priori.
RESUMEN
A new insight into capillary channel formation with a high aspect ratio in the translucent matter by nanosecond UV laser pulses is discussed based on our experiments on KrF laser multi-pulse drilling of polymethyl methacrylate and K8 silica glass. The proposed mechanism includes self-consistent laser beam filamentation along a small UV light penetration depth caused by a local refraction index increase due to material densification by both UV and ablation pressure, followed by filamentation-assisted ablation. A similar mechanism was shown to be realized in highly transparent media, i.e., KU-1 glass with a multiphoton absorption switched on instead of linear absorption. Waveguide laser beam propagation in long capillary channels was considered for direct electron acceleration by high-power laser pulses and nonlinear compression of excimer laser pulses into the picosecond range.
RESUMEN
The authors wish to make a change to the published paper [...].
RESUMEN
Shape-Memory Polymers (SMPs) can be stretched to large deformations and recover induced strains when exposed to an appropriate stimulus, such as heat. This emerging class of functional polymers has attracted much interest and found applications in medicine and engineering. Nevertheless, prior to any application, their physical and mechanical properties must be thoroughly studied and understood in order to make predictions or to design structures thereof. In this contribution, the viscoelastic behavior of a polyether-based polyurethane (Estane) and its rate- and temperature-dependent behavior have been studied experimentally and by the mean of simulations. The model-inherent material parameters are identified with the assumption of the thermo-rheological complexity. Here, the numerical results of uni-axial stress relaxations were compared with the associated experiments in conjucation with the Levenberg-Marquard optimization method to determine the parameters of the Prony equation. The ability of the model to simulate the thermo-mechanical properties of Estane was evaluated by data-rich experimental observations on tension and torsion in various temperature ranges. Heterogeneous tests are included into the experimental program to cover a broader spectrum of loading scenarios.
RESUMEN
It was previously shown that polycaprolactone (PCL)-based electrospun-produced paclitaxel (PTX)-enriched matrices exhibit long-term drug release kinetics and can be used as coatings for drug-eluting stents (DES). The installation of vascular stents involves a twofold increase in stent diameter and, therefore, an elongation of the matrices covering the stents, as well as the arterial wall in a stented area. We studied the influence of matrix elongation on its structure and PTX release using three different electrospun-produced matrices. The data obtained demonstrate that matrix elongation during stent installation does not lead to fiber breaks and does not interfere with the kinetics of PTX release. To study PTX diffusion through the expanded artery wall, stents coated with 5%PCL/10%HSA/3%DMSO/PTX and containing tritium-labeled PTX were installed into the freshly obtained iliac artery of a rabbit. The PTX passing through the artery wall was quantified using a scintillator ß-counter. The artery retained the PTX and decreased its release from the coating. The retention of PTX by the arterial wall was more efficient when incubated in blood plasma in comparison with PBS. The retention/accumulation of PTX by the arterial wall provides a prolonged drug release and allows for the reduction in the dose of the drugs in electrospun-produced stent coatings.
RESUMEN
Studying the features of changes in markers of oxidative stress (OS) and inflammation indicators in COPD patients depending on the degree of bronchial obstruction is one of the priority directions for improving the prognosis and monitoring of the course of this pathology. We conducted a comparative investigation of changes in markers of OS and apoptosis at the systemic and local levels in patients with moderate to severe COPD during exacerbation and stable phase. 105 patients with COPD aged 46-67 and 21 healthy nonsmoking volunteers comparable in age were examined. COPD patients were divided into four groups: moderate COPD (GOLDII) during the exacerbation (GOLDIIex, n = 25) and in the stable phase (GOLDIIst, n = 27), severe COPD (GOLDIII) during the exacerbation (GOLDIIIex, n = 29), and in the stable phase (GOLDIIIst, n = 24). We studied the levels of such lipid peroxidation (LPO) products as diene conjugates (DC) and Schiff bases (SB) and parameters of induced chemiluminescence (Imax, total light sum-S, Imax/S) in blood serum, as well as sCD95 concentration in blood and exhaled breath condensate (EBC). The relationship between the values of the OS system indicators with sCD95, as well as with the parameters of lung function, was investigated. Multidirectional changes in OS indicator levels in COPD patients depending on the severity of obstructive airway disorders have been established. The maximum values of DC (0.26 ± 0.046 RU), Imax (0.265 ± 0.19 RLU), and Imax/S (0.13 ± 0.05) were typical for patients with moderate COPD, while the highest SB level (5.7 ± 2.3 RU) was observed in severe COPD during an exacerbation. The exacerbation of the disease was characterized by an increase in DC concentration in both GOLDIIex (0.26 ± 0.046 RU) and GOLDIIIex (0.209 ± 0.02 RU) compared to the stable moderate and severe COPD (0.202 ± 0.028 RU and 0.19 ± 0.03 RU, respectively, p < 0.05). The established decrease in high values of DC, Imax, Imax/S, and sCD95 and an increase in SB concentration in GOLD III can serve as quantitative indicators of the prognosis of the severity of the disease. The serum concentration of sCD95 in GOLDIIex (366.4 ± 70.5 U/ml) and GOLDIIst (361.4 ± 72.8 U/ml) did not differ from the control group (393.7 ± 80.9 U/ml, p > 0.05). In patients with FEV1 < 49% during the exacerbation and stable phase, the serum levels of Imax/S (0.058 ± 0.01 and 0.062 ± 0.01) and sCD95 (318.2 ± 66.3 U/ml and 321.4 ± 42.5 U/ml) were lower than the values of healthy volunteers (0.08 ± 0.01 and 393.7 ± 80.9 U/ml, respectively, p < 0.05). A positive correlation between sCD95 concentration and airway obstruction degree in all examined COPD patients was established. The revealed numerous associations between sCD95 and OS marker levels in GOLDIII indicate a relationship between systemic radical stress and apoptosis processes both in the respiratory tract and the whole body under conditions of severe inflammation. The established correlations between the values of DC, Imax, and sCD95 in the blood serum and the lung function parameters in all studied patients allow us to consider these indicators as additional prognostic indicators of disease intensification. Our work results help clarify the participation and detail of FRO and apoptosis processes in developing pathophysiological features in moderate to severe COPD in different periods and, accordingly, improve the efficiency of diagnosis and treatment of the disease.
Asunto(s)
Peroxidación de Lípido , Estrés Oxidativo , Enfermedad Pulmonar Obstructiva Crónica/patología , Índice de Severidad de la Enfermedad , Receptor fas/análisis , Apoptosis , Pruebas Respiratorias , Estudios de Casos y Controles , Femenino , Humanos , Masculino , Persona de Mediana Edad , Enfermedad Pulmonar Obstructiva Crónica/metabolismo , Receptor fas/metabolismoRESUMEN
The biostability of the polyurethanes Tecoflex EG-80A and Pellethane 2363-80A, used as basic polymers of the vascular grafts (VGs) produced by electrospinning, as well as the tensile strength of Tecoflex VGs, are studied. Solutions of Tecoflex or Pellethane with gelatin and bivalirudin in 1,1,1,3,3,3-hexafluoroisopropanol are used for VG production. After 1, 12, and 24 weeks of VG implantation in the infrarenal position of the abdominal aorta of Wistar rats, VGs are explanted, fixed in formalin, freed from outer tissues, dialyzed, and dried. The polyurethanes are extracted from VGs by dispersion/extraction in tetrahydrofuran (THF) and freed from the excess of THF-insoluble biopolymers. The stability of polyurethanes is assessed by IR spectroscopy and gel permeation chromatography. Pellethane has emerged to be stable at all experimental points. Tecoflex loses approximately 10% of its molecular weight (both Mn and Mw) after 3 months and restored its initial value within 6 months of its functioning as a graft. Mechanical testing demonstrates a 30% reduction in the tensile strength after 3 months in VG and a 10% increase after 6 months. The stability and mechanical properties of polyurethane-based VGs demonstrate their utility for the reconstitution of damaged arteries.
RESUMEN
Properties of matrices manufactured by electrospinning from solutions of polyurethane Tecoflex EG-80A with gelatin in 1,1,1,3,3,3-hexafluoroisopropanol were studied. The concentration of gelatin added to the electrospinning solution was shown to influence the mechanical properties of matrices: the dependence of matrix tensile strength on protein concentration is described by a bell-shaped curve and an increase in gelatin concentration added to the elasticity of the samples. SEM, FTIR spectroscopy, and mechanical testing demonstrate that incubation of matrices in phosphate buffer changes the structure of the fibers and alters the polyurethane-gelatin interactions, increasing matrix durability. The ability of the matrices to maintain adhesion and proliferation of human endothelial cells was studied. The results suggest that matrices made of 3% polyurethane solution with 15% gelatin (wt/wt) and treated with glutaraldehyde are the optimal variant for cultivation of endothelial cells.