SpeedFlower: a comprehensive speed breeding protocol for indica and japonica rice.

To increase rice yields and feed billions of people, it is essential to enhance genetic gains. However, the development of new varieties is hindered by longer generation times and seasonal constraints. To address these limitations, a speed breeding facility has been established and a robust speed breeding protocol, SpeedFlower is developed that allows growing 4-5 generations of indica and/or japonica rice in a year. Our findings reveal that a high red-to-blue (2R > 1B) spectrum ratio, followed by green, yellow and far-red (FR) light, along with a 24-h long day (LD) photoperiod for the initial 15 days of the vegetative phase, facilitated early flowering. This is further enhanced by 10-h short day (SD) photoperiod in the later stage and day and night temperatures of 32/30 °C, along with 65% humidity facilitated early flowering ranging from 52 to 60 days at high light intensity (800 µmol m-2 s-1). Additionally, the use of prematurely harvested seeds and gibberellic acid treatment reduced the maturity duration by 50%. Further, SpeedFlower was validated on a diverse subset of 198 rice accessions from 3K RGP panel encompassing all 12 distinct groups of Oryza sativa L. classes. Our results confirmed that using SpeedFlower one generation can be achieved within 58-71 days resulting in 5.1-6.3 generations per year across the 12 sub-groups. This breakthrough enables us to enhance genetic gain, which could feed half of the world's population dependent on rice.

Crop establishment and diversification strategies for intensification of rice-based cropping systems in rice-fallow areas in Odisha.

Context or problem: In the Indian state of Odisha, rice-based system productivity is poor due to: (i) low rice yield in the monsoon (wet) season (2-4 t ha-1 compared to 6-8 t ha-1 in Punjab or Haryana); and (ii) limited cropping during the post-monsoon (dry) season (59% of the wet season rice area is left fallow in the dry season). Objective: Our study identifies strategies for increasing rice-based system productivity through: (i) alternative crop establishment methods in the wet season (Dry-Direct Seeded Rice or DSR, and mechanical puddled transplanted rice or PTR-M) to traditional methods such as broadcasting followed by post-emergence tillage (locally known as beushening) and manual random puddled transplanted rice (PTR-R); (ii) to identify rice-fallow areas suitable for pulse and oilseed cultivation in the dry season; and (iii) to evaluate the performance of short-duration pulses (green gram, Vigna radiata; black gram, Vigna mungo), and oilseeds (Brassica rapa var. toria, Helianthus annuus) in rice-fallow areas in the dry season. Methods: On-farm experiments were conducted between 2017 and 2019 in three districts of Odisha (Bhadrak, Cuttack and Mayurbhanj) to evaluate DSR compared to beushening and PTR-R; and PTR-M compared to PTR-R and manual line puddled transplanted rice (PTR-L) in the wet season. The data from Landsat-8 Operational Land Imager (OLI) and Sentinel-1satellite sensors was used to identify rice-fallow areas, and the daily SMAP (Soil Moisture Active Passive) L-band soil moisture was used for mapping suitable rice-fallow areas for growing pulses and oilseeds. Short duration crops were evaluated in suitable rice-fallow areas. Results: In the wet season, DSR (range -4 to + 53%) had a significant effect on rice yield over beushening. Similarly, PTR-M consistently increased rice yield by 16-26% over PTR-R, and by 5-23% over PTR-L. In the dry season, pulse crops (green gram and black gram) performed well compared to Indian mustard under rainfed cultivation. However, under irrigated conditions, dry-season rice yield was more productive than the rice equivalent yield of green gram, black gram and sunflower. We found that 1.03 M ha (i.e., ∼50%) of total rice-fallow areas of 2.1 M ha were suitable for growing short duration green gram and black gram in the dry season. Conclusions: We conclude that system productivity and cropping intensity can be increased by adoption of DSR and PTR-M in the wet season, and growing of green gram and black gram in the dry season. Implications: Odisha state can potentially produce an additional 0.67 million tonnes pulses if suitable rice-fallow areas are brought under green gram and black gram cultivation in the dry the season.

Time-Frequency analysis of acoustic signals from tyre-pavement interaction.

The acoustic responses of a dynamical system reflect the characteristics of the external excitation and vibrating system. The objective in an identification problem is to characterise the system and excitation from the measured responses. This becomes challenging if the characteristics of the dynamical system are time-varying. The analysis of the acoustic signal generated as a result of the tyre-pavement interaction (TPI) is one such situation, where in order to study the time-varying nature there is a need to obtain the characteristics of the instantaneous response. This study explores the single frequency filtering analysis of signals to examine the time-varying characteristics of tyre-pavement interaction noise (TPIN). Field measurements of TPI acoustic signals were obtained for a two-wheeler driven at different speeds on asphalt and cement concrete pavements. The time-frequency characteristics of the tyre tread impact and of the air cavity resonances are analysed by investigating the effect of vehicular speed and pavement type on TPIN. The specific features of TPIN such as the harmonics due to periodic tread impact and the frequency response due to resonances of the air cavities are examined in detail. The analysis presented in this paper will be useful in developing methods for health monitoring of tyre and pavement systems.

Intercomparison of crop establishment methods for improving yield and profitability in the rice-wheat system of Eastern India.

Conventionally managed rice-wheat systems of the eastern Indo-Gangetic Plains (E-IGP) that rely on soil puddling for rice and intensive tillage for wheat are low-yielding and resource-inefficient, leading to low profitability. While a host of alternative tillage and crop establishment (TCE) methods have been advocated as solutions for sustainably enhancing productivity and profitability, few systematic comparisons of these methods are reported. To address this gap, a three-year field study was conducted in Bihar, India with the goal of identifying TCE methods for rice-wheat systems that are high yielding, less resource-intensive, and more profitable. The following systems were evaluated: 1) puddled transplanted rice (PTR) followed by (fb) conventional tillage wheat (CTW) or zero-tillage wheat (ZTW); 2) machine transplanted rice in non-puddled soil (MTR) fb ZTW; 3) the system of rice intensification (SRI) fb system of wheat intensification (SWI); and 4) dry-seeded rice (DSR) fb ZTW. Rice cultivar duration (short versus medium-duration) was incorporated as a subplot treatment in all systems. Rice yields were similar with all methods, except DSR yield was 11 % lower and MTR yield was 7% higher than PTR in the third year. Cost of production was US$ 149 and 77 ha-1 lower in DSR and MTR, respectively, and US$ 84 ha-1 higher in SRI than PTR. The gross margin and benefit-cost (B:C) ratio was highest in MTR followed by DSR and lowest in SRI. In wheat, ZT resulted in a higher yield than CTW, especially when ZTW was cultivated after non-puddled rice (e.g., DSR or MTR). ZTW reduced production costs by US$ 69 ha-1, whereas SWI increased it by US$ 139 ha-1 relative to CTW. The higher yield and lower cost of production resulted in a higher gross margin (US$ 82-355 ha-1 and US$ 129-409 ha-1 higher than CTW and SWI, respectively) and a higher B:C ratio in ZTW treatments than CTW and SWI. At the system level, MTR or DSR followed by ZTW had both superior crop yields and consistently higher gross margins (US $133 to 382 ha-1) than other practices. On the other hand, the SRI fb SWI system had no yield advantage and poorer economic performance than conventional practices. In all systems, the inclusion of a medium-duration rice hybrid resulted in higher rice and system yields. These results suggest that significant gains in profitability are possible with emerging TCE practices in rice-wheat systems, but alternatives such as the SRI and SWI will likely erode farmer incomes.

Transforming labor requirement, crop yield, and profitability with precision dry-direct seeding of rice and integrated weed management in Eastern India.

In many parts of Eastern India that have a very high prevalence of rural poverty and food insecurity, the prevailing rice establishment practice of 'beushening' is characterized by low yields and modest profitability, while labor and energy inputs are high. Beushening consists of broadcasting ungerminated rice seed at high rates (>100 kg ha-1) prior to the onset of monsoon rain, followed by ploughing at 4-6 weeks after crop emergence to control weeds with subsequent manual gap filling through seedling redistribution to ensure stand uniformity. Dry-direct seeding of rice (DSR), both drill-DSR and precision broadcast-DSR in combination with integrated weed management (IWM) may offer a pathway for simultaneously reducing costs and markedly increasing productivity. On-farm trials were conducted from 2016 to 2018 in four districts of Odisha (Mayurbhanj, Cuttack, Bhadrak, and Puri) to evaluate the yield and economic performance of dry-DSR (drill and precision broadcast), coupled with herbicide-based IWM strategies, in comparison with conventional beushening. Drill-DSR with IWM increased grain yield by 1.7 t ha-1 in Mayurbhanj and 1.3 t ha-1 in Cuttack, but not in Bhadrak, compared to beushening. The combination of increased yield and lower variable cost in drill-DSR increased net benefit by 550, 395, and 166 US$ ha-1 in Mayurbhanj, Cuttack, and Bhadrak, respectively. For farmers without access to seed drills, precision broadcast-DSR with IWM increased yields by 0.91, 1.22 and 0.60 t ha-1, and net benefits by 270, 312, and 188 US$ ha-1 in Mayurbhanj, Puri, and Bhadrak, respectively. Among the IWM practices evaluated in dry-DSR, application of pretilachlor + safener @ 500 g ai ha-1 as pre-emergence, followed by bispyribac-sodium @ 20 g ai ha-1 at 15-25 days after sowing as post-emergence, and then one spot hand weeding at 30-35 days after sowing was effective in controlling weeds. These results suggest that rice yield gaps in eastern India can be reduced, and farmers' income from rice can be increased by more than 50 % by replacing beushening with drill-DSR or precision broadcast-DSR. The results could be applicable to approximately 6.4 million ha of lowland rice where beushening is currently practiced in Eastern India.

Indian agriculture, air pollution, and public health in the age of COVID.

Emerging evidence supports the intuitive link between chronic health conditions associated with air pollution and the vulnerability of individuals and communities to COVID-19. Poor air quality already imposes a highly significant public health burden in Northwest India, with pollution levels spiking to hazardous levels in November and early December when rice crop residues are burned. The urgency of curtailing the COVID-19 pandemic and mitigating a potential resurgence later in the year provides even more justification for accelerating efforts to dramatically reduce open agricultural burning in India.

Participatory evaluation guides the development and selection of farmers' preferred rice varieties for salt- and flood-affected coastal deltas of South and Southeast Asia.

Rice is the staple food and provides livelihood for smallholder farmers in the coastal delta regions of South and Southeast Asia. However, its productivity is often low because of several abiotic stresses including high soil salinity and waterlogging during the wet (monsoon) season and high soil and water salinity during the dry season. Development and dissemination of suitable rice varieties tolerant of these multiple stresses encountered in coastal zones are of prime importance for increasing and stabilizing rice productivity, however adoption of new varieties has been slow in this region. Here we implemented participatory varietal selection (PVS) processes to identify and understand smallholder farmers' criteria for selection and adoption of new rice varieties in coastal zones. New breeding lines together with released rice varieties were evaluated in on-station and on-farm trials (researcher-managed) during the wet and dry seasons of 2008-2014 in the Indian Sundarbans region. Significant correlations between preferences of male and female farmers in most trials indicated that both groups have similar criteria for selection of rice varieties. However, farmers' preference criteria were different from researchers' criteria. Grain yield was important, but not the sole reason for variety selection by farmers. Several other factors also governed preferences and were strikingly different when compared across wet and dry seasons. For the wet season, farmers preferred tall (140-170 cm), long duration (160-170 d), lodging resistant and high yielding rice varieties because these traits are required in lowlands where water stagnates in the field for about four months (July to October). For the dry season, farmers' preferences were for high yielding, salt tolerant, early maturing (115-130 d) varieties with long slender grains and good quality for better market value. Pest and disease resistance was important in both seasons but did not rank high. When farmers ranked the two most preferred varieties, the ranking order was sometimes variable between locations and years, but when the top four varieties that consistently ranked high were considered, the variability was low. This indicates that at least 3-4 of the best-performing entries should be considered in succeeding multi-location and multi-year trials, thereby increasing the chances that the most stable varieties are selected. These findings will help improve breeding programs by providing information on critical traits. Selected varieties through PVS are also more likely to be adopted by farmers and will ensure higher and more stable productivity in the salt- and flood-affected coastal deltas of South and Southeast Asia.

ß cell function and insulin resistance in lean cases with polycystic ovary syndrome.

Obesity is a major factor in development of insulin resistance (IR) and metabolic features in polycystic ovary syndrome (PCOS) patients. Nearly two-thirds patients with PCOS (30 of 37 confirmed cases of PCOS) in our previous community based study were lean, in contrast to Caucasians. Metabolic parameters including IR and ß cell function have not been characterized well in this group of lean PCOS. To study the metabolic features including IR and ß cell function in lean PCOS patients, 53 patients with BMI, <23 kg/m2 were compared with 71 obese PCOS and 45 age and body mass index matched controls. Lean patients had similar ß cell function and IR as compared to controls and obese patients, though the latter group had more metabolic abnormality. Fasting c-peptide and its ratio to glucose were significantly higher in lean patients compared to controls. In subset of subjects with five point OGTT, disposition index and Matsuda index (MI) showed significant negative correlation with BMI and blood pressure. MI also negatively correlated with waist, WHR, and HOMAB. High fasting C-peptide is probably a class effect as is seen in both lean and obese PCOS.

A multilayer micromechanical model of the cuticle of Curculio longinasus Chittenden, 1927 (Coleoptera: Curculionidae).

Curculio longinasus Chittenden, 1927 (Coleoptera: Curculionidae), is a weevil species common throughout the southwestern United States that uses its rostrum - a very slender, curved, beak-like projection of the head - to excavate tunnels in plant organs (such as acorns) for egg laying (oviposition). Once the apical portion of the rostrum has been inserted into the preferred substrate for oviposition, the female begins rotating around the perimeter of the hole, elevating her head by extending the fore-legs, and rotating the head in place in a drilling motion. This action causes significant elastic deformation of the rostrum, which will bend until it becomes completely straight. To better understand the mechanical behavior of the cuticle as it undergoes deformation during the preparation of oviposition sites, we develop a comprehensive micro/macro model of the micromechanical structure and properties of the cuticle, spanning across all cuticular regions, and reliably mirroring the resultant macroscale properties of the cuticle. Our modeling approach relies on the use of multi-scale, hierarchical biomaterial representation, and employs various micromechanical schemata - e.g., Mori-Tanaka, effective field, and Maxwell - to calculate the homogenized properties of representative volume elements at each level in the hierarchy. We describe the configuration and behavior of this model in detail, and discuss the theoretical implications and limitations of this approach with emphasis on future biomechanical and comparative evolutionary research. Our detailed account of this approach can thereby serve as a methodological template for exploring the biomechanical behavior of new insect structures.

Productivity of sodic soils can be enhanced through the use of salt tolerant rice varieties and proper agronomic practices.

Regaining the agricultural potential of sodic soils in the Indo-Gangetic plains necessitates the development of suitable salt tolerant rice varieties to provide an entry for other affordable agronomic and soil manipulation measures. Thus selection of high yielding rice varieties across a range of sodic soils is central. Evaluation of breeding lines through on-station and on-farm farmers' participatory varietal selection (FPVS) resulted in the identification of a short duration (110-115 days), high yielding and disease resistant salt-tolerant rice genotype 'CSR-89IR-8', which was later released as 'CSR43' in 2011. Several agronomic traits coupled with good grain quality and market value contributed to commercialization and quick adoption of this variety in the sodic areas of the Indo-Gangetic plains of eastern India. Management practices required for rice production in salt affected soils are evidently different from those in normal soils and practices for a short duration salt tolerant variety differ from those for medium to long duration varieties. Experiments were conducted at the Indian Council of Agricultural Research-Central Soil Salinity Research Institute (ICAR-CSSRI), Regional Research Station, Lucknow, Uttar Pradesh, India during 2011 and 2013 wet seasons, to test the hypothesis that combining matching management practices (Mmp) with an improved genotype would enhance productivity and profitability of rice in sodic soils. Mmp were developed on-station by optimizing existing best management practices (Bmp) recommended for the region to match the requirements of CSR43. The results revealed that transplanting 4 seedlings hill-1 at a spacing of 15 × 20 cm produced significantly higher yield over other treatments. The highest additional net gain was US$ 3.3 at 90 kg ha-1 N, and the lowest was US$ 0.4 at 150 kg ha-1 N. Above 150 kg ha-1, the additional net gain became negative, indicating decreasing returns from additional N. Hence, 150 kg N ha-1 was considered the economic optimum N application rate for CSR43 in these sodic soils. Using 150-60-40-25 kg N-P2O5-K2O-ZnSO4·7H2O ha-1 in farmers' fields grown to CSR43 produced an average of 5.5 t ha-1 grain. The results of on-farm evaluation trials of CSR43 showed that matching management practices (Mmp) increased yield by 8% over existing best management practices (Bmp) recommended by ICAR-CSSRI for sodic soils and by 16% over framers' management practices; however, combining Mmp with CSR43 resulted in 35% higher yields over farmers' current varieties and management. This approach of combining cost effective crop and nutrient management options and a salt-tolerant variety can maximize the productivity and profitability of sodic soils in the alluvial Indo-Gangetic plains and in neighboring salt-affected areas of the Ganges mega delta in South Asia.

Oral Self-Nanoemulsifying System Containing Ionic Liquid of BX795 Is Effective against Genital HSV-2 Infection in Mice.

BX795 is an emerging drug candidate that has shown a lot of promise as a next-generation non-nucleoside antiviral agent for the topical treatment of herpes simplex virus type-1 (HSV-1) and herpes simplex virus type-2 (HSV-2) infections. Our studies indicated that BX795 has limited oral bioavailability, which could be attributed to its low and pH-dependent solubility. Lipid-based formulations such as self-nanoemulsifying systems (SNESs) can improve the solubility and oral bioavailability of BX795, but the poor lipid solubility of BX795 further limits the development of SNES. To improve the loading of BX795 into SNES, we evaluated the ability of various bulky and biocompatible anions to transform BX795 into an ionic liquid (IL) with higher lipid solubility. Our studies showed that sodium lauryl sulfate and docusate sodium were able to transform BX795 into IL. Compared to pure BX795, the developed BX795 ILs showed differential in vitro cytocompatibility to HeLa cells but exhibited similar in vitro antiviral activity against HSV-2. Interestingly, BX795 docusate (BX795-Doc), an IL of BX795 with ∼135-fold higher lipid solubility than pure BX795, could be successfully incorporated into an SNES, and the developed BX795-Doc-SNES could readily form nanoemulsions of size ≤200 nm irrespective of the pH of the buffer used for dilution. Our in vitro studies showed that BX795-Doc-SNES retained the inherent antiviral activity against HSV-2 and showed similar in vitro cytocompatibility, indicating the availability of BX795 from the SNES in vitro. Finally, orally delivered SNES containing BX795-Doc showed a significant reduction in HSV-2 infection in mice compared to the untreated control. Thus, the transformation of BX795 into IL and the subsequent incorporation of the BX795 IL into the SNES are an effective strategy to improve oral therapy of genital herpes infection.

Tolerability, pharmacokinetics, and anti-herpetic activity of orally administered BX795.

Herpes simplex viruses type-1 (HSV-1) and type-2 (HSV-2) are ubiquitous human pathogens causing serious pathologies in the ocular, orofacial and anogenital regions. While current treatments such as nucleoside analogs are effective in most cases, the emergence of drug resistance necessitates the development of newer antivirals with different mechanisms of action. In this regard, BX795, a small molecule inhibitor has shown significant benefit in the treatment of herpesvirus infections previously when dosed topically. However, the efficacy of BX795's systemic dosage remains to be tested. In this study, we evaluated acute and short-term toxicity of orally administered BX795 at a concentration of 400 and 100 mg/kg respectively in mice. This was followed by an evaluation of pharmacokinetics and tissue distribution of BX795 on intravenous and oral administration. Based on these studies, we performed an in vivo antiviral study using murine models of ocular HSV-1 and genital HSV-2 infection. Our results indicate that orally administered BX795 is very well tolerated, had oral bioavailability of 56%, and reached ocular and genital tissues within the first 15 min of dosing. Our studies indicate that BX795 administered orally can significantly reduce herpesvirus replication in the ocular and genital tissue.

Role of Physiotherapy in HPV Proven Cases of Oral Submucous Fibrosis.

Background: To assess the role of physiotherapy in human papillomavirus (HPV) proven cases of oral submucous fibrosis (OSMF). Materials and Methods: Overall, 100 patients got recruited. Only histopathologic confirmed cases of OSMF were enrolled. Purified DNA of tissue blocks was quantified by spectrophotometry. Prevalence of HPV was evaluated. The participants got randomized into 2 cohorts: HPV positive cases and HPV negative cases. Physiotherapy was done and outcome was done and outcome was assessed and compared. Assessment of results was done by SPSS software followed by statistical evaluation. Results: HPV was seen in 80% of the patients. Mean mouth opening pretreatment and postphysiotherapy among patients with HPV positive status was 26.31 mm and 30.12 mm, respectively. Mean mouth opening pretreatment and postphysiotherapy among patients with HPV negative status was 25.11 mm and 29.74 mm, respectively. Nonsignificant results were obtained while comparing the outcome of physiotherapy among HPV positive and negative groups. Conclusion: Outcome of physiotherapy among OSMF patients is independent of HPV status.

Exponentiated Teissier distribution with increasing, decreasing and bathtub hazard functions.

This article introduces a two-parameter exponentiated Teissier distribution. It is the main advantage of the distribution to have increasing, decreasing and bathtub shapes for its hazard rate function. The expressions of the ordinary moments, identifiability, quantiles, moments of order statistics, mean residual life function and entropy measure are derived. The skewness and kurtosis of the distribution are explored using the quantiles. In order to study two independent random variables, stress-strength reliability and stochastic orderings are discussed. Estimators based on likelihood, least squares, weighted least squares and product spacings are constructed for estimating the unknown parameters of the distribution. An algorithm is presented for random sample generation from the distribution. Simulation experiments are conducted to compare the performances of the considered estimators of the parameters and percentiles. Three sets of real data are fitted by using the proposed distribution over the competing distributions.

Putative targeting by BX795 causes decrease in protein kinase C protein levels and inhibition of HSV1 infection.

Herpes simplex virus type-1 (HSV1) exploits cellular machinery for its own replicative advantage. Current treatment modalities against HSV1 cause toxicity and drug resistance issues. In the search for alternative forms of treatment, we have uncovered a small molecule, BX795, as a candidate drug with strong antiviral potential owing to its multitargeted mode of action. In this study, we show that in addition to a previously known mechanism of action, BX795 can directly interact with the proviral host factor protein kinase C (PKC) in silico. When administered to HSV1 or mock infected human corneal epithelial (HCE) cells, BX795 significantly reduces the protein level and perinuclear localization of proviral PKC-α and PKC-ζ isoforms. This activity closely mimics that of a known PKC inhibitor, Bisindolylmaleimide I (BIM I), which also inhibits viral replication. Taken together our studies demonstrate a previously unknown mechanism by which BX795 exerts its antiviral potential.

Time management governs climate resilience and productivity in the coupled rice-wheat cropping systems of eastern India.

India will need to produce 30% more wheat by 2050, and these gains must principally come from intensification in eastern India where low productivity is common. Through a dense network of on-farm surveys for the rice-wheat system in this region, we show that contemporary wheat sowing dates have a central influence on achieved and attainable yields, superseding all other crop management, soil and varietal factors. We estimate that untapped wheat production potential will increase by 69% with achievable adjustments to wheat sowing dates without incurring undesirable trade-offs with rice productivity, irrigation requirements or profitability. Our findings also indicate that transformative gains in wheat yields are only possible in eastern India if rice and wheat are managed as a coupled system. Steps taken to 'keep time' through better management of the annual cropping calendar will pay dividends for food security, profitability and climate resilience now and as a foundation for adaptation to progressive climate change.

Prophylactic treatment with BX795 blocks activation of AKT and its downstream targets to protect vaginal keratinocytes and vaginal epithelium from HSV-2 infection.

Genital herpes infections in humans are usually caused by herpes simplex virus type-2 (HSV-2), which result in recurrent lesions in the anogenital region. Past studies have shown that a viral protein translation inhibitor, BX795 is capable of mitigating HSV-2 infection both in vitro and in vivo when dosed therapeutically. However, any preventative benefits of this compound against HSV-2 infection remain poorly understood. In this study, we show that BX795 when added prophylactically to human vaginal keratinocytes generates strong preventative effects against a future HSV-2 infection. As a possible mechanism for this action, we found that BX795 efficiently reduces phosphorylation of AKT and its downstream targets p70S6K and 4EBP1. Our in-silico protein docking studies support our immunoblotting results and provide further credence to the proposed mechanism. Using a murine model of vaginal infection, we show that prior treatment with BX795 is also protective in vivo and leads to lower viral replication in the vaginal tissue.

Heparan Sulfate Binding Cationic Peptides Restrict SARS-CoV-2 Entry.

A novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has caused a global pandemic. While the world is striving for a treatment modality against SARS-CoV-2, our understanding about the virus entry mechanisms may help to design entry inhibitors, which may help to limit the virus spreading. Owing to the importance of cellular ACE2 and heparan sulfate in SARS-CoV-2 entry, we aimed to evaluate the efficacy of cationic G1 and G2 peptides in virus entry inhibition. In silico binding affinity studies revealed possible binding sites of G1 and G2 peptides on HS and ACE2, which are required for the spike-HS and spike-ACE2 interactions. Prophylactic treatment of G1 and G2 peptide was also proved to decrease the cell surface HS, an essential virus entry receptor. With these two mechanisms we confirm the possible use of cationic peptides to inhibit the entry of SARS-CoV-2.

Tailoring grain sizes of the biodegradable iron-based alloys by pre-additive manufacturing microalloying.

We demonstrated the design of pre-additive manufacturing microalloying elements in tuning the microstructure of iron (Fe)-based alloys for their tunable mechanical properties. We tailored the microalloying stoichiometry of the feedstock to control the grain sizes of the metallic alloy systems. Two specific microalloying stoichiometries were reported, namely biodegradable iron powder with 99.5% purity (BDFe) and that with 98.5% (BDFe-Mo). Compared with the BDFe, the BDFe-Mo powder was found to have lower coefficient of thermal expansion (CTE) value and better oxidation resistance during consecutive heating and cooling cycles. The selective laser melting (SLM)-built BDFe-Mo exhibited high ultimate tensile strength (UTS) of 1200 MPa and fair elongation of 13.5%, while the SLM-built BDFe alloy revealed a much lower UTS of 495 MPa and a relatively better elongation of 17.5%, indicating the strength enhancement compared with the other biodegradable systems. Such an enhanced mechanical behavior in the BDFe-Mo was assigned to the dominant mechanism of ferrite grain refinement coupled with precipitate strengthening. Our findings suggest the tunability of outstanding strength-ductility combination by tailoring the pre-additive manufacturing microalloying elements with their proper concentrations.

Alteration in plant spacing improves submergence tolerance in Sub1 and non-Sub1 rice (cv. IR64) by better light interception and effective carbohydrate utilisation under stress.

Besides genetic improvement for developing stress-tolerant cultivars, agronomic management may also add considerable tolerance against different abiotic stresses in crop plants. In the present study, we evaluated the effect of six different spacing treatments (S1: 10 × 10 cm; S2: 15 × 10 cm; S3:15 × 15 cm; S4:20 × 10 cm; S5: 20 × 15 cm; S6: 20 × 20 cm (row-row × plant-plant)) for improving submergence tolerance in rice. A high yielding submergence intolerant rice cultivar IR64 was tested against its SUB1 QTL introgressed counterpart (IR64-Sub1) for 12 days of complete submergence for different spacing treatments in field tanks. Relatively wider spaced plants showed higher individual plant biomass and early seedling vigour, which was particularly helpful for IR64 in increasing plant survival (by 150% in S6 over S1) under 12 days of submergence, whereas the improvement was less in IR64-Sub1 (13%). Underwater radiation inside the plant canopy, particularly beyond 40 cm water depth, was significantly greater in wider spacing treatments. Leaf senescence pattern captured by SPAD chlorophyll meter reading and chlorophyll fluorescence imaging data (Fm, Fv/Fm) taken at different time intervals after stress imposition suggested that there was lesser light penetration inside the canopy of closer spaced plants, and that it might hasten leaf senescence and damage to the photosynthetic system. The initial content of total non-structural carbohydrate (NSC) was higher in wider spaced plants of IR64, and also the rate of depletion of NSC was lesser compared with closer spaced plants. In contrast, there was not much difference in NSC depletion rate under different spacing in IR64-Sub1. Further, higher antioxidant enzyme activities in wider spaced plants (both IR64 and IR64-Sub1) after de-submergence indicated better stress recovery and improved tolerance. Taken together we found that wider spacing (row-row: 20 cm and plant-plant: 15 cm and more) can significantly improve submergence tolerance ability in rice, particularly in submergence intolerant non-Sub1 cultivar like IR64, perhaps due to better underwater light penetration, delayed leaf senescence and slower depletion of NSC reserve.