RESUMEN
BACKGROUND AND OBJECTIVE: Degenerative diseases of the spine have a negative impact on the quality of life of patients. This study presents the results of numerical modelling of the mechanical behaviour of the lumbar spine with patient-specific conditions at physiological loads. This paper aims to numerically study the influence of degenerative changes in the spine and the presence of an endoprosthesis on the creation of conditions for tissue regeneration. METHODS: A numerical model of the mechanical behaviour of lumbar spine at healthy and after total disc replacement under low-energy impacts equivalent to physiological loads is presented. The model is based on the movable cellular automaton method (discrete elements), where the mechanical behaviour of bone tissue is described using the Biot poroelasticity accounting for the presence and transfer of interstitial biological fluid. The nutritional pathways of the intervertebral disc in cases of healthy and osteoporotic bone tissues were predicted based on the analysis of the simulation results according to the mechanobiological principles. RESULTS: Simulation of total disc replacement showed that osseointegration of the artificial disc plates occurs only in healthy bone tissue. With total disc replacement in a patient with osteoporosis, there is an area of increased risk of bone resorption in the near-contact area, approximately 1 mm wide, around the fixators. Dynamic loads may improve the osseointegration of the implant in pathological conditions of the bone tissue. CONCLUSIONS: The results obtained in the case of healthy spine and osteoporotic bone tissues correspond to the experimental data on biomechanics and possible methods of IVD regeneration from the position of mechanobiological principles. The results obtained with an artificial disc (with keel-type fixation) showed that the use of this type of endoprosthesis in healthy bone tissues allows to reproduce the function of the natural intervertebral disc and does not contribute to the development of neoplastic processes. In the case of an artificial disc with osteoporosis of bone tissues, there is a zone with increased risk of tissue resorption and development of neoplastic processes in the area near the contact of the implant attachment. This circumstance can be compensated by increasing the loading level.
Asunto(s)
Simulación por Computador , Disco Intervertebral , Vértebras Lumbares , Reeemplazo Total de Disco , Humanos , Vértebras Lumbares/cirugía , Disco Intervertebral/cirugía , Disco Intervertebral/fisiopatología , Regeneración , Fenómenos Biomecánicos , Osteoporosis/fisiopatología , OseointegraciónRESUMEN
OBJECTIVES: In the Phase I/III IMpower133 study, first-line atezolizumab plus carboplatin and etoposide (CP/ET) treatment for extensive-stage small cell lung cancer (ES-SCLC) significantly improved overall survival (OS) and progression-free survival versus placebo plus CP/ET. We explored patient and disease characteristics associated with long-term survival in IMpower133, and associations of differential gene expression and SCLC-A (ASCL1-driven), SCLC-N (NEUROD1-driven), SCLC-P (POU2F3-driven), and SCLC-inflamed (SCLC-I) transcriptional subtypes with long-term survival. MATERIALS AND METHODS: Patients with previously untreated ES-SCLC were randomized 1:1 to four 21-day cycles of CP/ET with atezolizumab or placebo. Long-term survivors (LTS) were defined as patients who lived ≥ 18 months post randomization. A generalized linear model was used to evaluate the odds of living ≥ 18 months. Differential gene expression was analyzed using RNA-sequencing data in LTS and non-LTS. OS was assessed by T-effector and B-cell gene signature expression. Distribution of SCLC transcriptional subtypes was assessed in LTS and non-LTS. RESULTS: More LTS were in the atezolizumab arm (34%) than in the placebo arm (20%). The odds ratio for living ≥ 18 months in the atezolizumab arm versus the placebo arm was 2.1 (P < 0.03). Enhanced immune-related signaling was seen in LTS in both arms. Exploratory OS analyses showed atezolizumab treatment benefit versus placebo across T-effector and B-cell gene signature expression subgroups. A higher proportion of LTS than non-LTS in both arms had the SCLC-I subtype; this difference was particularly pronounced in the atezolizumab arm. CONCLUSION: These exploratory analyses suggest that long-term survival is more likely with atezolizumab than placebo in ES-SCLC, confirming the treatment benefit of the IMpower133 regimen. CLINICALTRIAL: gov Identifier: NCT02763579.
Asunto(s)
Neoplasias Pulmonares , Carcinoma Pulmonar de Células Pequeñas , Humanos , Carcinoma Pulmonar de Células Pequeñas/tratamiento farmacológico , Carcinoma Pulmonar de Células Pequeñas/genética , Carboplatino , Etopósido , Neoplasias Pulmonares/tratamiento farmacológico , Neoplasias Pulmonares/genética , Sobrevivientes , Protocolos de Quimioterapia Combinada Antineoplásica/uso terapéuticoRESUMEN
In this work, the method of electron beam additive manufacturing (EBAM) was used to fabricate a Cu-based alloy possessing a shape memory effect. Electron beam additive technology is especially relevant for copper and its alloys since the process is carried out in a vacuum, which makes it possible to circumvent oxidation. The main purpose of the study was to establish the influence of the printing parameters on the structure of the obtained products, their phase composition, mechanical properties, dry friction behavior, and the structure-phase gradient that formed in Cu-Al-Mn alloy samples during electron beam layer-by-layer printing. The results of the study allowed us to reveal that the structure-phase composition, the mechanical properties, and the tribological performance of the fabricated material are mainly affected by the magnitude of heat input during electron beam additive printing of Cu-Al-Mn alloy. High heat input values led to the formation of the ß1' + α decomposed structure. Low heat input values enabled the suppression of decomposition and the formation of an ordered 1 structure. The microhardness values were distributed on a gradient from 2.0 to 2.75 GPa. Fabricated samples demonstrated different behaviors in friction and wear depending on their composition and structure, with the value of the friction coefficient lying in the range between 0.1 and 0.175.
RESUMEN
Degenerative changes in the lumbar spine significantly reduce the quality of life of people. In order to fully understand the biomechanics of the affected spine, it is crucial to consider the biomechanical alterations caused by degeneration of the intervertebral disc (IVD). Therefore, this study is aimed at the development of a discrete element model of the mechanical behavior of the L4-L5 spinal motion segment, which covers all the degeneration grades from healthy IVD to its severe degeneration, and numerical study of the influence of the IVD degeneration on stress state and biomechanics of the spine. In order to analyze the effects of IVD degeneration on spine biomechanics, we simulated physiological loading conditions using compressive forces. The results of modeling showed that at the initial stages of degenerative changes, an increase in the amplitude and area of maximum compressive stresses in the disc is observed. At the late stages of disc degradation, a decrease in the value of intradiscal pressure and a shift in the maximum compressive stresses in the dorsal direction is observed. Such an influence of the degradation of the geometric and mechanical parameters of the tissues of the disc leads to the effect of bulging, which in turn leads to the formation of an intervertebral hernia.
RESUMEN
This article reviews the role of ALK tyrosine kinase inhibitors (TKIs) in the literature and provides expert commentary on local use in Argentina, Brazil, China, Russia, South Korea, and Turkey. We identified 56 articles involving patients with ALK-positive non-small cell lung cancer (NSCLC) and brain metastases (BM) treated with ALK TKIs published between January 2000 and June 2021. In first-line settings, central nervous system response rates in clinical trials with alectinib (86-94%), brigatinib (67-78%), and lorlatinib (42-82%) were generally higher than those reported with crizotinib (16-71%). Median progression-free survival in patients receiving crizotinib (5.6-7.4 months) was lower than alectinib (not reached), brigatinib (24.0 months), and ceritinib (10.7-25.2 months). Across these counties, next-generation TKIs are preferred for patients with progressing BM lesions. Although next-generation ALK TKIs demonstrate significant activity in these patients and following progression on crizotinib, access remains a challenge for personalized therapy.
Asunto(s)
Neoplasias Encefálicas , Carcinoma de Pulmón de Células no Pequeñas , Neoplasias Pulmonares , Humanos , Carcinoma de Pulmón de Células no Pequeñas/tratamiento farmacológico , Carcinoma de Pulmón de Células no Pequeñas/genética , Crizotinib/uso terapéutico , Quinasa de Linfoma Anaplásico/genética , Neoplasias Pulmonares/tratamiento farmacológico , Neoplasias Pulmonares/genética , Inhibidores de Proteínas Quinasas/uso terapéutico , Inhibidores de Proteínas Quinasas/farmacología , Neoplasias Encefálicas/tratamiento farmacológico , Neoplasias Encefálicas/secundarioRESUMEN
INTRODUCTION: In the phase 1/3 IMpower133 study, atezolizumab plus carboplatin and etoposide (CP/ET) followed by maintenance atezolizumab for first-line treatment of extensive-stage SCLC (ES-SCLC) led to improvement in both overall survival (OS) and progression-free survival (PFS) versus placebo plus CP/ET followed by maintenance placebo. We explored the benefit of atezolizumab versus placebo in the subset of patients who reached the IMpower133 maintenance phase and the safety profile of maintenance therapy. METHODS: Patients with untreated ES-SCLC were randomized 1:1 to four 21-day cycles of CP/ET with atezolizumab or placebo, followed by maintenance atezolizumab or placebo. The primary end points were OS and investigator-assessed PFS. A multivariate Cox model from the start of maintenance treatment was used to evaluate the treatment effect and account for lead-time bias; a generalized linear model was used to identify prognostic or predictive characteristics for reaching the maintenance phase. RESULTS: A similar proportion of patients in each arm received at least the first dose of maintenance therapy (atezolizumab: 77%, n = 154 of 201; placebo: 81%, n = 164 of 202) and were included in the maintenance analysis population. An Eastern Cooperative Oncology Group performance status of 0 and absence of liver metastases at baseline were identified as prognostic factors for reaching the maintenance phase. The positive treatment effect with atezolizumab remained after adjusting for baseline characteristics. Median OS and PFS from the start of maintenance therapy in the atezolizumab versus placebo arm were 12.5 versus 8.4 months (hazard ratio = 0.59, 95% confidence interval: 0.43-0.80) and 2.6 versus 1.8 months (hazard ratio = 0.63 [95% confidence interval: 0.49-0.80]), respectively. Treatment-related adverse events from the start of maintenance therapy occurred in 41% (n = 64 of 155) and 25% (n = 41 of 163) of safety-evaluable patients in the atezolizumab and placebo arms, respectively, and were grade 3 or 4 in 28% (n = 43 of 155) and 23% (n = 37 of 163) of the respective populations; no patient in the atezolizumab arm and one patient in the placebo arm had a grade 5 treatment-related adverse event. CONCLUSIONS: These data in the context of other immunotherapy trials in ES-SCLC suggest that induction with atezolizumab plus CP/ET and maintenance treatment with atezolizumab are important components that contributed to the OS benefit observed in IMpower133. Safety results from randomization and from the start of maintenance therapy were similar between the treatment arms despite the continuation of atezolizumab in the maintenance phase.
Asunto(s)
Neoplasias Pulmonares , Carcinoma Pulmonar de Células Pequeñas , Anticuerpos Monoclonales Humanizados , Protocolos de Quimioterapia Combinada Antineoplásica , Carboplatino , Etopósido , HumanosRESUMEN
Arthritis is a degenerative disease that primarily affects the cartilage and meniscus of the knee joint. External acoustic stimulation is used to treat this disease. This article presents a numerical model of the knee joint aimed at the computer-aided study of the regenerative effects of shockwave treatment. The presented model was verified and validated. A numerical analysis of the conditions for the regeneration of the tissues of the knee joint under shockwave action was conducted. The results allow us to conclude that to obtain the conditions required for the regeneration of cartilage tissues and meniscus (compressive stresses above the threshold value of 0.15 MPa to start the process of chondrogenesis; distortional strains above the threshold value of 0.05% characterized by the beginning of the differentiation of the tissues in large volumes; fluid pressure corresponding to the optimal level of 68 kPa to transfer tissue cells in large volumes), the energy flux density of therapeutic shockwave loading should exceed 0.3 mJ/mm2.
RESUMEN
BACKGROUND AND OBJECTIVE: Degenerative diseases of the musculoskeletal system significantly reduce the quality of human life. Hip resurfacing is used to treat degenerative diseases in the later stages. After surgery, there is a risk of endoprosthesis loosening and low-energy fracture during daily physical activity. Computer modeling is a promising way to predict the optimal low-energy loads that do not lead to bone destruction. This paper aims to study numerically the mechanical behavior of the proximal femur, amenable to degenerative changes and subjected to hip resurfacing under low-energy impact equivalent to physiological loads. METHODS: A numerical model of the mechanical behavior of the femur after hip resurfacing arthroplasty under low-energy impacts equivalent to physiological loads is presented. The model is based on the movable cellular automaton method (discrete elements), where the mechanical behavior of bone tissue is described using the Biot poroelasticity accounting for the presence and transfer of interstitial biological fluid. RESULTS: For the first time, it is shown that a poroelastic model allows predicting the service life of endoprostheses, taking into account the individual characteristics of the bone tissues amenable to various degenerative diseases. The obtained results indicate that the changes in the bone properties have a significant influence on the critical forces corresponding to the first appearance of microcracks and the fracture formation. At the same time, their effect on the type of fracture is negligible. A much more impact on the type of fracture has the kinematic and dynamic conditions of the exposure. CONCLUSIONS: The obtained results show the promise of using the proposed model for predicting the operational resource of resurfacing endoprostheses, taking into account the physiological features of the structure of the patient's bone tissues.
Asunto(s)
Prótesis de Cadera , Modelos Biológicos , Simulación por Computador , Fémur/diagnóstico por imagen , Fémur/cirugía , Análisis de Elementos Finitos , Humanos , Prótesis e Implantes , Medición de RiesgoRESUMEN
Importance: Checkpoint inhibitors targeting programmed cell death 1 or its ligand (PD-L1) as monotherapies or in combination with anti-cytotoxic T-lymphocyte-associated antigen 4 have shown clinical activity in patients with metastatic non-small cell lung cancer. Objective: To compare durvalumab, with or without tremelimumab, with chemotherapy as a first-line treatment for patients with metastatic non-small cell lung cancer. Design, Setting, and Participants: This open-label, phase 3 randomized clinical trial (MYSTIC) was conducted at 203 cancer treatment centers in 17 countries. Patients with treatment-naive, metastatic non-small cell lung cancer who had no sensitizing EGFR or ALK genetic alterations were randomized to receive treatment with durvalumab, durvalumab plus tremelimumab, or chemotherapy. Data were collected from July 21, 2015, to October 30, 2018. Interventions: Patients were randomized (1:1:1) to receive treatment with durvalumab (20 mg/kg every 4 weeks), durvalumab (20 mg/kg every 4 weeks) plus tremelimumab (1 mg/kg every 4 weeks, up to 4 doses), or platinum-based doublet chemotherapy. Main Outcomes and Measures: The primary end points, assessed in patients with ≥25% of tumor cells expressing PD-L1, were overall survival (OS) for durvalumab vs chemotherapy, and OS and progression-free survival (PFS) for durvalumab plus tremelimumab vs chemotherapy. Analysis of blood tumor mutational burden (bTMB) was exploratory. Results: Between July 21, 2015, and June 8, 2016, 1118 patients were randomized. Baseline demographic and disease characteristics were balanced between treatment groups. Among 488 patients with ≥25% of tumor cells expressing PD-L1, median OS was 16.3 months (95% CI, 12.2-20.8) with durvalumab vs 12.9 months (95% CI, 10.5-15.0) with chemotherapy (hazard ratio [HR], 0.76; 97.54% CI, 0.56-1.02; P = .04 [nonsignificant]). Median OS was 11.9 months (95% CI, 9.0-17.7) with durvalumab plus tremelimumab (HR vs chemotherapy, 0.85; 98.77% CI, 0.61-1.17; P = .20). Median PFS was 3.9 months (95% CI, 2.8-5.0) with durvalumab plus tremelimumab vs 5.4 months (95% CI, 4.6-5.8) with chemotherapy (HR, 1.05; 99.5% CI, 0.72-1.53; P = .71). Among 809 patients with evaluable bTMB, those with a bTMB ≥20 mutations per megabase showed improved OS for durvalumab plus tremelimumab vs chemotherapy (median OS, 21.9 months [95% CI, 11.4-32.8] vs 10.0 months [95% CI, 8.1-11.7]; HR, 0.49; 95% CI, 0.32-0.74). Treatment-related adverse events of grade 3 or higher occurred in 55 (14.9%) of 369 patients who received treatment with durvalumab, 85 (22.9%) of 371 patients who received treatment with durvalumab plus tremelimumab, and 119 (33.8%) of 352 patients who received treatment with chemotherapy. These adverse events led to death in 2 (0.5%), 6 (1.6%), and 3 (0.9%) patients, respectively. Conclusions and Relevance: The phase 3 MYSTIC study did not meet its primary end points of improved OS with durvalumab vs chemotherapy or improved OS or PFS with durvalumab plus tremelimumab vs chemotherapy in patients with ≥25% of tumor cells expressing PD-L1. Exploratory analyses identified a bTMB threshold of ≥20 mutations per megabase for optimal OS benefit with durvalumab plus tremelimumab. Trial Registration: ClinicalT rials.gov Identifier: NCT02453282.