RESUMEN
Pathogenic bacteria resistant to conventional antibiotics represent a global challenge and justify the need for new antimicrobials capable of combating bacterial multidrug resistance. This study describes the development of a topical hydrogel in a formulation composed of cellulose, hyaluronic acid (HA), and silver nanoparticles (AgNPs) against strains of Pseudomonas aeruginosa. AgNPs as an antimicrobial agent were synthesized by a new method based on green chemistry, using arginine as a reducing agent and potassium hydroxide as a carrier. Scanning electron microscopy showed the formation of a composite between cellulose and HA in a three-dimensional network of cellulose fibrils, with thickening of the fibrils and filling of spaces by HA with the presence of pores. Ultraviolet-visible spectroscopy (UV-vis) and particle size distribution for dynamic light scattering (DLS) confirmed the formation of AgNPs with peak absorption at ~430 nm and 57.88 nm. AgNPs dispersion showed a minimum inhibitory concentration (MIC) of 1.5 µg/mL. The time-kill assay showed that after 3 h of exposure to the hydrogel containing AgNPs, there were no viable cells, corresponding to a bactericidal efficacy of 99.999% in the 95% confidence level. We obtained a hydrogel that is easy to apply, with sustained release and bactericidal properties against strains of Pseudomonas aeruginosa at low concentrations of the agent.
RESUMEN
Trans-chalcone (TC) is a flavonoid precursor characterized by a wide spectrum of action, with anti-inflammatory and antioxidant effects. However, no validated methods are available in official compendia for the analysis of this substance. Thus, the aim of this work was to develop and validate a simple, fast, and reproducible spectrophotometric method for the analysis of TC in raw material, and in topical pharmaceutical formulation containing TC. The established conditions were: methanol as extracting solvent, and detection wavelength of 309 nm by UV spectrophotometer. All tests followed the rules of Resolution RDC 166, 2017. The proposed method was selective. Linearity was demonstrated in the concentration range of 1 to 8 µg/mL (r = 0.999). Repeatability and intermediate precision were confirmed by low relative standard deviation values of 1.53% and 2.70% for TC, and of 1.73% and 2.91% for formulation containing TC. Accuracy, evaluated through recovery test, was adequate, with minimum of 98.24% and maximum of 100.23% of recovery. It was observed that the small deliberate modifications done did not interfere with the results, demonstrating the method is robust. The results showed that the method was considered suitable for the intended purpose, inexpensive, easy to apply, selective, linear, precise, accurate, and robust for the determination TC, and pharmaceutical formulation containing TC. Thus, the method developed satisfies the need for an analytical method for the determination of TC, and topical formulation containing TC, being effective, innovative and able to aid in the development of the pharmaceutical field.
Trans-chalcona (TC) é um precursor de flavonoides caracterizado por um amplo espectro de ação, como efeitos anti-inflamatórios e antioxidantes. No entanto, não há método validado disponível em compêndio oficial para análise deste composto. Então, o objetivo deste trabalho foi desenvolver e validar um método espectrofotométrico, simples, rápido e reprodutível para análise de TC em matéria-prima, e em formulação farmacêutica tópica contendo TC. As condições estabelecidas foram: metanol como o solvente de extração, e detecção no comprimento de onda de 309 nm por espectrofotometria no UV. Todos os testes seguiram as normas da RDC 166, 2017. O método proposto foi seletivo. A linearidade foi demonstrada na faixa de concentração de 1 a 8 µg/mL (r = 0.999). A repetibilidade e a precisão intermediária foram confirmadas pelos valores baixos de desvio padrão relativo de 1,53% e 2,70% para a TC, e de 1,73% e 2,91% para a formulação contendo TC. A exatidão, avaliada por meio de testes de recuperação, foi adequada, com mínimo de 98,24% e máximo de 100,04% de recuperação. Observou-se que pequenas modificações no método não interferiram nos resultados, demonstrando que o método é robusto. Os resultados demonstraram que o método foi adequado para a finalidade pretendida, barato, de fácil aplicação, seletivo, linear, preciso, exato e robusto para determinação de TC, e de formulação contendo TC. Então o método desenvolvido satisfaz as necessidades de um método analítico para determinação de TC, e de formulação tópica contendo TC, e é eficaz, inovador e pode contribuir para o desenvolvimento da área farmacêutica.