Small-diameter titanium grade IV and titanium-zirconium implants in edentulous mandibles: Ten-year results from a double-blind, randomised controlled split-mouth core-trial.

The goal of this extension study was to compare the 10-year outcome of 3.3 mm diameter titanium-zirconium (TiZr) or grade IV titanium (Ti) implants in mandibular implant-overdentures. MATERIALS AND METHODS: This study is the 10-year follow-up from a randomised, controlled, double-blind, split-mouth multicentre clinical trial. Patients with edentulous mandibles had received two implants in the interforaminal region (bone-level, diameter 3.3 mm, microrough surface), one of TiZr (test) and one of Ti (control). Implant survival and success, plaque and sulcus bleeding indices, probing pocket depth, gingival margin, clinical attachment level and radiographic crestal bone levels were evaluated. RESULTS: Fifty of 91 patients with implants were available for the 10-year examination and 36 patients were valid for the intent-to-treat (ITT) analysis. The implant success rate was calculated as 94.6% and 91.9% for the TiZr implants and the Ti implants respectively. Four implants were lost (TiZr = 1; Ti = 3) in the entire study period. Kaplan-Meier survival analyses estimated 10- year implant survival rate for TiZr to 98.9% and Ti 95.8%.The mean of total and functional crestal bone loss was 1.49 mm (±1.37 mm) and 0.82 mm (±1.09 mm) in the TiZr group and 1.56 mm (±1.34 mm) and 0.85 mm (±1.16 mm) in the Ti group. CONCLUSIONS: This split-mouth design RCT on mandibular implant-overdentures evidenced, bearing in mind its follow-up time-related reduced cohort size, high 10-year implant success- and survival rates. These results confirm TiZr as well-suited implant material for realising small-diameter implants. Registered on www. CLINICALTRIALS: gov: NCT01878331.

Mandibular overdenture with a single implant in the canine region (c-SIMO): a feasibility study.

OBJECTIVES: The aim of this multi-center pilot study was to assess the viability and feasibility of a novel treatment concept - the canine-positioned single implant mandibular overdenture (c-SIMO), with the single implant placed on the patient's preferred chewing side instead of the midline. MATERIALS AND METHODS: Participants received a single implant in the canine region of their preferred chewing side, based on an Asymmetry Index observed during mastication. The pre-existing mandibular denture was transformed into a c-SIMO on a spherical attachment. The primary outcome was oral health-related quality of life (OHRQoL), measured with GOHAI and OHIP-EDENT. Secondary outcomes included denture satisfaction index (DSI), chewing efficiency (CE), maximum bite force (MBF), implant survival and success, and prosthetic maintenance. Data analysis included descriptive statistics and bivariate comparison tests. RESULTS: Fifteen participants received the c-SIMO treatment (mean age: 69.9 ± 7.0). Implant success and survival rates were 100% at 1 year. Patient-reported outcome measures improved significantly compared to pre-treatment values (OHIP-EDENT: p = 0.001; DSI: p = 0.001; GOHAI: p = 0.002). Masticatory outcomes also improved significantly (CE: p = 0.001; overall MBF: p = 0.005). Post-implant, MBF was significantly higher in the ipsilateral side compared to the contralateral side at 2 weeks (p = 0.019) and 3 months (p = 0.015), but no longer at T3 (p = 0.730). Common prosthodontic events included denture base adjustments (n = 17) and matrix activation (n = 9). CONCLUSIONS: This pilot study concludes that c-SIMO is a promising treatment option, and a potential alternative to the single midline implant overdenture. CLINICAL RELEVANCE: The novel treatment concept of a canine-positioned single implant mandibular overdenture could be a viable treatment alternative to the midline positioning.

Maxillomandibular relationship record methods for computer-engineered complete dentures: a scoping review.

OBJECTIVES: The purpose of this scoping review was to identify different methods employed for recording the maxillomandibular relationship (MMR) for computer-aided designed and manufactured (CAD-CAM) complete dentures (CDs). MATERIALS AND METHODS: This scoping review followed the PRISMA-ScR guidelines and was developed according to Arksey and O'Malley and The Joanna Briggs Institute protocol. The methods were registered on the Open Science Framework (< osf.io/rf4xm> ). The focus question was: "What are the different techniques for recording the maxillomandibular relationship in the digital workflow used in CECDs?" Two investigators searched 3 online databases [MEDLINE (PubMed), Scopus, and Science Direct] independently. The inclusion criteria were clinical studies and reviews that assessed techniques for recording MMR using digital workflow for manufacturing of CECDs. A descriptive analysis was performed considering the study design, manufacturing system, clinical steps, and tools for the determination of MMR, and the difficulty level of procedures. RESULTS: 4779 articles were identified in the electronic search and 10 studies were included for data analysis. The review identified 4 commercially available CAD-CAM denture systems and 3 innovative methods suitable for abbreviating the number of appointments (2 to 4 visits). The trial denture is inherent to the procedure for the Baltic System and 3 innovative techniques. Three techniques (2 innovative and WholeYouNexteeth) demonstrated lower difficulty levels for performing the clinical procedures, regardless of the professional skills. CONCLUSIONS: The commercially available and innovative techniques for the recording of MMR may provide predictability of the treatment. The techniques are effective, however, rely on the learning curve and the patient's clinical condition. CLINICAL RELEVANCE: Recording of the maxillomandibular relationship is paramount for the manufacturing and functionality of complete dentures. Clinicians should be aware of the different tools and techniques described for registering the jaw relationship.

Reliability between the two-colour chewing gum and the gummy-jelly tests used for the assessment of masticatory performance.

OBJECTIVE: This study aimed to evaluate the reliability of two methods used to assess masticatory performance and attempt to correlate them to achieve interchangeability between the methods. METHODS: Twelve healthy dentate volunteers (men = 6, women = 6; mean age = 28.3 ± 4.1) with no known dental or medical pathologies were requested to participate in this study. Each participant completed three masticatory performance assessments, including two two-colour mixing-ability tests using chewing-gums (CG: gum#1 and gum#2) and the gummy-jelly (GJ) test. For each method, participants created five samples each (total = 15 measurements per participant, gum#1 = 5, gum#2 = 5, GJ = 5). For the gum#1 and gum#2 methods, the predetermined chewing cycles were fixed at 10, 15, 20, 25 and 30 cycles, and for the GJ method, the time duration was fixed at 10, 15, 20, 25 and 30 s. The parameter measures were submitted to Z-score transformation, and Bland-Altman plots were generated to graphically compare the differences between two techniques against their means. Additionally, mountain plot was used to assess the cumulative distribution of measurement error between the methods. RESULTS: A total of 180 measurements were recorded. There were significant correlations between the number of chewing cycles/chewing time and masticatory performance using the gum#1 (r = -.753; p < .001), gum#2 (r = -.838; p < .001) and GJ (r = .730). When all tests were considered together for each method, significant correlations were found (p < .001). A descriptive range of mean values aiming to produce reference value ranges for predictive purposes was achieved considering the interchangeably among the methods [CG = GJ (VoH-mg = dL): 10 cycle = 10 s: 0.329 = 110; 15 cycles = 15 s: 0.177 = 164; 20 cycles = 20 s: 0.130 = 205; 25 cycles = 25 s: 0.086 = 200; 30 cycles = 30 s: 0.077 = 267]. CONCLUSION: The strong correlations and high consistency between the two masticatory performance methods found in this study conclude that the two assessment methods are reliable and interchangeable. Further evaluations are warranted to arrive at a conversion formula for translation of the results between the two methods.

Removable complete denture with a metal base: Integration of digital design and conventional fabrication techniques.

OBJECTIVE: Digitally-designed removable complete dentures are typically composed of a resin denture base without a metal framework. However, metal denture bases are preferable as resin bases are more susceptible to fracture. Therefore, this article introduces a unique technique that integrates computer-aided design (CAD) and conventional resin processing for the fabrication of removable complete dentures with a metal framework. CLINICAL CONSIDERATIONS: A maxillary complete denture with a metal base and a mandibular implant-retained overdenture reinforced with a metal framework were fabricated. The dentures were designed using CAD software and a tooth library. The denture bases were milled from wax disks, and artificial teeth were placed to complete the wax dentures. The metal frameworks were also designed using CAD software and produced via casting of printed resin patterns. Finally, conventional denture processing techniques were applied to obtain dentures with metal frameworks. CONCLUSIONS: A digitally designed, removable complete denture with a metal base can be successfully fabricated using the described technique, which merges digital design and conventional methods. This article demonstrates the feasibility and potential advantages of this innovative approach in denture fabrication. CLINICAL SIGNIFICANCE: The presented technique provides the following advantages: digital design features, precise space above implant overdenture attachments for a metal framework, convenience of esthetic evaluation with printed trial dentures, long-term data storage and duplication, reliable bond between the artificial teeth and denture base, and enhanced strength of the removable complete denture due to the metal reinforcement.

Oral function in completely edentulous patients rehabilitated with implant-supported dental prostheses: A systematic review and meta-analysis.

OBJECTIVES: This review evaluated the effects of rehabilitation with implant-supported prostheses on the oral function of completely edentulous adults. MATERIALS AND METHODS: Systematic literature searches were performed to identify records reporting on oral function in completely edentulous adults rehabilitated with implant-supported prostheses. Meta-analyses were performed on various outcomes including bite force, masticatory performance, muscle activity, mandibular movement/chewing pattern, and salivary flow. RESULTS: 5507 records were identified. Thirty studies qualified for data extraction and analysis. The kappa (𝛋) for the search and identification strategy ranged between 0.50 and 1.00. Meta-analysis was performed grouping the studies by outcomes and split by time points of 6-12 months, 12-36 months, and >36 months after implant therapy. The meta-analyses revealed a significant improvement in oral function of completely edentulous adults after rehabilitation with implant-supported prostheses at 6-12 months (Z = -4.895, p < .001; 95% CI: -0.703, -0.301; τ2 = .609; Q = 114.953, df = 17, p < .001; I2 = 85.2%), at 12-36 months (Z = -4.886, p < .001; 95% CI: -0.580, -0.248; τ2 = .908; Q = 280.611, df = 35, p < .001; I2 = 87.5%) and at more than 36 months (Z = -9.108, p < .001; 95% CI: -1.472, -0.951; τ2 = .019; Q = 7.918, df = 7, p = .340; I2 = 11.6%). The included studies demonstrated a low to moderate risk of bias. CONCLUSIONS: This systematic review concluded that the oral function of completely edentate adults significantly improved with implant-supported/retained prostheses, even when only one jaw received implant therapy. Therefore, implant therapy should be promoted for edentulous adults to alleviate the shortcomings of conventional complete removable dental prostheses.

Prosthodontic outcomes of mandibular overdenture treatment with one or two implants: 4-year results of a randomized clinical trial.

OBJECTIVE: To assess the incidence of prosthodontic maintenance events and complications during 4 years of follow-up after mandibular overdenture treatment with one or two implants. METHODS: Participants received one or two implants inserted in the midline (1-IOD group) or the lateral incisor-canine area bilaterally (2-IOD group). Implants were loaded with an early loading protocol after 3 weeks. Programmed recall visits were scheduled at the 6-, 12-, 36-, and 48-month follow-ups and nonprogrammed visits in case of prosthodontic complaints. The type of maintenance was registered, and the final treatment outcome was classified as successful, surviving, unknown, dead, repair, or retreatment. RESULTS: Forty-seven participants, mean age 65.4 ± 8.6, 74.5% female, were included (1-IOD = 23; 2-IOD = 24) and 44 completed the 4-year follow-up. A total of 159 prosthodontic maintenance events occurred and 89 in unscheduled visits. The most common event was the need for minor modifications of the denture base due to sore spots in the oral mucosa (n = 56 in 31 patients), matrix activation (n = 54 in 34 patients), and overdenture fracture (n = 25 in 18 patients). A "successful" or "surviving" outcome could be attributed to 57.5% of cases, whereas 38.3% needed repair. No significant differences in the incidence of prosthodontic events or treatment outcomes were found between the two groups. CONCLUSIONS: Findings show that 1-IODs perform similar to 2-IODs when considering the incidence of fractures and the need for prosthodontic maintenance, including adjustments of the overdenture and the attachment system.

Group 4 ITI Consensus Report: Patient benefits following implant treatment in partially and fully edentulous patients.

OBJECTIVES: The aim of Working Group 4 was to address patient benefits associated with implant dentistry. Focused questions on (a) dental patient-reported outcomes (dPROs), (b) improvement in orofacial function, and (c) preservation of orofacial tissues in partially and fully edentulous patients following provision of implant-retained/supported dental prostheses were addressed. MATERIALS AND METHODS: Three systematic reviews formed the basis for discussion. Participants developed statements and recommendations determined by group consensus based on the findings of the systematic reviews. These were then presented and accepted following further discussion and modifications as required by the plenary of the 7th ITI Consensus Conference, taking place in 2023 in Lisbon, Portugal. RESULTS: Edentulous patients wearing complete dentures (CD) experience substantial improvements in overall dPROs and orofacial function following treatment with either complete implant-supported fixed dental prostheses (CIFDP) or implant overdentures (IODs). With respect to dPROs, mandibular IODs retained by two implants are superior to IODs retained by one implant. However, increasing the number of implants beyond two, does not further improve dPROs. In fully edentulous patients, rehabilitation with CIFDP or IOD is recommended to benefit the preservation of alveolar bone and masseter muscle thickness. CONCLUSIONS: Completely edentulous patients benefit substantially when at least the mandible is restored using an CIFDP or an IOD compared to CD. In fully edentulous patients, implant prostheses are the best option for tooth replacement. The availability of this treatment modality should be actively promoted in all edentulous communities, including those with limited access and means.

Development of craniometry-based predictive model to determine occlusal vertical dimension by using the eye-ear distance in a French population.

STATEMENT OF PROBLEM: Techniques for determining occlusal vertical dimension (OVD) have limitations, including the lack of reproducibility or invasiveness. Recently, a craniometry-based predictive model comparing OVD with eye-ear distance (EED) was developed in Chile. However, this study included a specific population and excluded patients with a history of orthodontics. For verification, studies on other populations are required. PURPOSE: The purpose of this clinical study was to follow the previously described protocol to obtain an equation for determining OVD in a French cohort (mostly White with an orthodontic history). MATERIAL AND METHODS: Dentate adults with a stable occlusion and no known maxillofacial, otolaryngeal, or temporomandibular problems were included in this study. Demographic information, including participant age, sex, and history of orthodontic treatment, was collected. Facial height and width were measured with digital calipers, and the left EED and OVD were recorded with a craniometer. The facial index was calculated to classify participants into euryprosopic, mesoprosopic, or leptoprosopic types. RESULTS: Of the 300 included participants (28 ±11 years), 60% were women, and 67% reported a history of orthodontic treatment. Euryprosopic represented 17% of participants, mesoprosopic 48%, and leptoposopic 35%. A positive correlation was found between the left EED and OVD in all facial types, but it was more important in women. The following equation was obtained: OVD=44.58+(0.45×left EED)+sex (women=-4.57; men=0)+facial type (leptoprosopic=0; mesoprosopic=-3.35; euryprosopic=-7.27). CONCLUSIONS: The occlusal vertical dimension is correlated with sex, left EED, and facial type. This straightforward method can be applied in conjunction with other techniques to determine the OVD in the French population.

A novel prosthesis presentation test to screen for cognitive and functional decline.

OBJECTIVES AND BACKGROUND: To validate a novel screening test for cognitive and functional decline in older patients rehabilitated with complete removable dental prostheses (CRDPs). MATERIALS AND METHODS: Edentate old in-patients rehabilitated with CRDPs were included in this study. Participants were requested to remove their prostheses before their intraoral examinations. The prostheses were then presented in an inverted orientation. Participants had to correct the orientation of the prostheses and insert them in the appropriate jaws. The test was repeated after the intraoral exam. Appropriate statistical models were used (⍺ = .05) to associate the test results with the participants' mini-mental state examination (MMSE) score, functional independence measure (FIM), age and sex. RESULTS: Among the 86 participants (mean-age: 85.4 ± 6.4 years; mean MMSE: 19.8 ± 5.5; mean FIM: 77.9 ± 20.8), 21 (24.4%) failed to correctly insert the prosthesis. The prosthesis presentation test (PPT) was associated with the FIM but not the MMSE. Regression models further confirmed an association with age (P = .043), but not sex. Additional analyses revealed the PPT test is associated with the FIM's cognitive sub-sets of memory, problem solving and social interaction. CONCLUSION: The PPT is a novel, simple and quick screening tool that can help detect functional difficulties in older people. It can easily be performed during an oral examination. Future studies are needed to determine whether the PPT can be used to detect deficits in executive function, as a complement to the MMSE and also as a first assessment of a patient's ability to manage dentures independently.

Exploring preferences of older adults for dental services: A pilot multi-national discrete choice experiment.

OBJECTIVES: To pilot an exploration of older adults' future preferences using discrete choice experiments to understand who should provide dental examinations and treatment, where these services should be provided, and participants' willingness to pay and willingness to travel. BACKGROUND: The proportion of older adults in the general population is increasing and is recognised as a pressing public health challenge. MATERIALS AND METHODS: Older people aged 65 years and over were recruited into this study from the UK, Switzerland and Greece. Drawing on earlier stakeholder engagement, a set of choice experiments are developed to explore the future preferences of older people for dental examinations and dental treatment, as they anticipated losing their independence. These were presented to the participants using a range of platforms, because of the COVID pandemic. Data were analysed in STATA using a random-effects logit model. RESULTS: Two hundred and forty-six participants (median age 70 years) completed the pilot study. There was a strong preference across all countries for a dentist to undertake a dental examination (Greece: ß = 0.944, Switzerland: ß = 0.260, UK ß = 0.791), rather than a medical doctor (Greece: ß = -0.556, Switzerland: ß = -0.4690, UK: ß = -0.468). Participants in Switzerland and the UK preferred these examinations to be undertaken in a dental practice (Switzerland: ß = 0.220, UK: ß = 0.580) while participants in Greece preferred the dental examination to be undertaken in their homes (ß = 1.172). Greek participants preferred dental treatment to be undertaken by a specialist (ß = 0.365) in their home (ß = 0.862), while participants from the UK and Switzerland preferred to avoid any dental treatment at home (Switzerland: ß = -0.387; UK: ß = -0.444). Willingness to pay analyses highlighted that participants in Switzerland and the UK were willing to pay more to ensure the continuity of future service provision at a family dental practice (Switzerland: ß = 0.454, UK: ß = 0.695). CONCLUSION: Discrete choice experiments are valuable for exploring older people's preferences for dental service provision in different countries. Future larger studies should be conducted to further explore the potential of this approach, given the pressing need to design services that are fit for purpose for older people. Continuity of dental service provision is considered as important by most older people, as they anticipate losing their dependence.

Influence of the vegan, vegetarian and omnivore diet on the oral health status in adults: a systematic review and meta-analysis.

OBJECTIVE: This systematic review aimed to evaluate the influence of the nature of diet (vegan, vegetarian, and omnivore) on the oral health status in adults. METHODS: This systematic review and meta-analysis was performed using the PRISMA guidelines. Electronic databases [PubMed, Embase, CENTRAL], online search engines (Google Scholar), research portals, and hand searches were performed systematically to identify studies. The last literature search was performed February 1st, 2021. Studies were included if they reported on the influence of the nature of diet on the oral health status (oral hygiene, periodontal health, dental status, and salivary function) in adults, by two investigators. Inter-investigator reliability was evaluated using Kappa (κ) statistics. PROSPERO registration number: CRD42020211567. RESULTS: Twenty-two studies were included for data extraction and final analysis. The meta-analysis revealed that the bleeding on probing measure was higher in omnivores (Z = -4.057, p < 0.0001; 95% CI: -0.684, -0.238; I2 = 0.0%) and the overall periodontal health was significantly better in vegan/vegetarians than omnivores (Z = -2.632, p = 0.008; 95% CI: -0.274, -0.073; I2 = 29.7%). Vegan/vegetarians demonstrated more dental erosion (Z = 3.325, p = 0.001; 95% CI: 0.170, 0.659; I2 = 0.0%). In adults over 60 years old, the prevalence of caries was higher in omnivores (Z = 3.244, p = 0.001; 95% CI: 0.092, 0.371; I2 = 0.0%), while complete edentulism was more prevalent in vegetarians (Z = -4.147, p < 0.0001; 95% CI: -0.550, -0.197; I2 = 0.0%). CONCLUSIONS: This review reveals that adults on an omnivore diet may be associated with a higher risk for periodontal problems and dental caries, while vegetarians/vegans may be associated with a higher risk for dental erosion.

IMPACT OF LOADING PROTOCOL OF 2-IMPLANT BAR-RETAINED MANDIBULAR OVERDENTURES ON ORAL HEALTH-RELATED QUALITY OF LIFE: A RANDOMIZED CONTROLLED TRIAL.

OBJECTIVES: Aim was to assess whether immediate loading (IL) is more effective than delayed loading (DL) for 2-implant bar-retained mandibular overdentures in terms of oral health-related quality of life (OHRQoL) improvement over a period of 24-month. METHODS: In this randomized controlled trial, 32 edentulous patients (mean age: 65.7 ± 10.6 years, 50.0% female) were included. Potential participants had to be unsatisfied with the retention of their current mandibular complete denture and demanded implant treatment for inclusion in the study. OHRQoL was assessed with the 49-item Oral Health Impact Profile (OHIP) at baseline before treatment and 1, 3, 6, 12, and 24 months after implant loading and insertion of implant-retained bars for overdenture support. A mixed-effects model with patients as random effect and an unstructured covariance matrix was developed to address repeated outcome measurement. RESULTS: Patients' OHRQoL impairment at baseline was substantial indicated by mean OHIP summary score of 45.1 points. OHIP summary scores decreased substantially from baseline to 1-month follow-up to a mean of 33.5 points (P = .020). OHRQoL further improved during study period indicated by OHIP summary score of 25.7 points at 24-month follow-up. Raw treatment effects (IL vs. DL) ranged from -1.2 OHIP points for 12-month follow-up to 5.8 OHIP points for 24-month follow-up. Assuming constant treatment and time effects, treatment effect was small and not statistically significant (-0.7 OHIP points; P= .918). CONCLUSION: A 2-implant bar-retained mandibular overdentures substantially improves OHRQoL over a period of at least 24 months. There seems to be no significant effect of implant loading protocol.

Periodontitis and peri-implantitis in elderly people experiencing institutional and hospital confinement.

An increasing number of elderly people retain their natural teeth into old age and further, the prevalence of endosseous implants for supporting oral prosthesis is ever increasing. These teeth and implants now present a considerable challenge in terms of maintenance, especially when patients become dependent on care. Periodontal and peri-implant diseases are more prevalent in elderly than in younger age cohorts. There are distinct differences related to the inflammatory response between periodontal and peri-implant tissues, both in young and old age. The age-related reasons for the increase in periodontal infections may be related to poor oral hygiene because of a loss of dexterity or vision, but also to immunosenescence. This term describes the aging of the immune system and the decline of its effectiveness with age. Low-grade infections, like chronic periodontitis, may cause low-grade inflammation and subsequently increase the likelihood of developing chronic diseases. In return, treatment of periodontitis may improve general health, as demonstrated for diabetes. A second mechanism illustrating how poor oral health translates into systemic disease is the risk of developing aspiration pneumonia. The treatment options in old age should be evaluated with regard to the issues of general health and maintenance. Systematic periodontal maintenance therapy, as performed in younger age cohorts, may be difficult to implement in elderly people experiencing institutional or hospital confinement because of logistics, barriers related to patients and caregivers, or cost. The scale of periodontal disease in old age represents a public health issue.

Delay in the diagnosis of dementia in urban India: Role of dementia subtype and age at onset.

BACKGROUND: Early diagnosis of dementia is crucial for timely intervention. However, frequently, there is a substantial delay in diagnosis. Therefore, it is essential to recognise and address the barriers to early diagnosis. These have not been systematically studied in India. We at a specialist memory clinic in India investigated the time from symptom onset to diagnosis of dementia and factors contributing to the delay. METHODS: In this cross-sectional study, consecutive patients with dementia (n = 855) seen at a private hospital underwent a standard clinical assessment and investigations. The primary outcome variable was time from symptom onset to diagnosis (TTD). The association of age, education, gender, dementia subtype, and age of onset on TTD were examined using a univariate analysis of covariance. RESULTS: The median TTD was 24 months; 43% were diagnosed after 24 months. There was a significant association between TTD and age at onset (young onset-median 36 months vs. late onset-24 months) and dementia subtype. Patients with vascular dementia were diagnosed significantly earlier as compared to patients with Alzheimer's disease (AD) and frontotemporal dementia (FTD) [median 18, 24, and 30 months, respectively]. There was no effect of gender or education on the TTD. CONCLUSION: About 40% of patients with dementia were diagnosed more than 2 years after symptom onset, particularly young onset dementias and FTD. Our study findings highlight the gaps in diagnosing patients with dementia in urban India and have significant implications for developing and implementing multifaceted interventions to improve the early diagnosis of dementia.

Associations between self-reported periodontal disease and nutrient intakes and nutrient-based dietary patterns in the UK Biobank.

AIM: To examine the cross-sectional associations between single nutrient intakes and posteriori nutrient-based dietary patterns and periodontal disease risk in a subset of the UK Biobank cohort. MATERIALS AND METHODS: Dietary data were collected by 24-h dietary recall on up to five separate occasions over 16 months. A touchscreen questionnaire was used to collect oral health information. Participants were considered at high risk of periodontal disease if they reported having painful gums and/or bleeding gums and/or loose teeth. Principal component analysis identified four nutrient-based dietary patterns from 20 nutrients. Logistic regression was used to estimate the odds ratio of periodontal disease risk for single nutrients and nutrient-based dietary patterns. RESULTS: A total of 9476 participants (mean age 56.2 years [SD 8.0]) were included in the analysis. Higher intakes of vitamin B6, B12, C, and E, folate, iron, potassium, magnesium, polyunsaturated fatty acids, and total sugar were associated with a lower risk of periodontal disease. Higher intake of saturated fat was associated with an increased risk. A dietary pattern characterized by high micronutrients and fibre intake was associated with low risk of periodontal disease. CONCLUSION: Within this sample of middle-aged and older adults, a "high micronutrient and fibre" dietary pattern was associated with reduced risk of periodontal disease.

Assessing masticatory performance with a colour-mixing ability test using smartphone camera images.

BACKGROUND: Colour-mixing ability tests are frequently used to assess masticatory performance, but the image acquisition process may be cumbersome and technique sensitive. OBJECTIVES: To evaluate the reliability of smartphone camera images in assessing masticatory performance using a colour-mixing ability test. METHODS: Participants were recruited into three groups of dental state (n = 20 each): fully dentate, removable partial denture wearers and complete denture wearers. After performing a colour-mixing ability test, images of the gum specimens (Hue-Check Gum©) were captured with two smartphones and compared with the images obtained from a flatbed scanner by two examiners. The images were analysed with a subjective- (SA) and an opto-electronical assessment (VoH). Inter- and intra-rater reliability were tested. ANOVA models with repeated measures were used for statistical analysis (⍺ = .05). RESULTS: All three image acquisition techniques were able to distinguish masticatory performance between different dental states. For SA, inter-rater reliability was fair to substantial and intra-rater reliability was substantial to almost perfect. For VoH, inter-rater reliability with the smartphones was at times different between two examiners, but the intra-rater assessment was reliable. The opto-electronic analysis with smartphone images underestimated the masticatory performance significantly when compared to the flatbed scanner analysis. Seven-day ageing of the specimens did not significantly affect the results. CONCLUSIONS: The assessment of masticatory performance with the Hue-Check Gum© is a reliable method. The use of smartphones may occasionally underestimate masticatory performance; image acquisition with a flatbed scanner remains the gold standard. A centralised analysis of the photographed wafer may foster the reliability of the diagnosis.

Fit and retention of complete denture bases: Part II - conventional impressions versus digital scans: A clinical controlled crossover study.

STATEMENT OF PROBLEM: Although the intraoral scanning of edentulous ridges is feasible, clinical evidence that the resulting denture retention is equivalent to that achieved with conventional impressions is lacking. PURPOSE: The purpose of this clinical study was to determine the retention of complete denture bases fabricated from digital intraoral scans versus conventional impressions by using border molding and posterior palatal seal compression. MATERIAL AND METHODS: Twenty volunteers with an edentulous maxilla were recruited. An intraoral scan of the maxilla and a conventionally border-molded impression with a custom tray were made. The conventional impression was poured; the definitive cast was scanned. Three-dimensionally (3D) printed (PB1) and milled bases (MB1) were fabricated based on the scan of the definitive cast. Based on the intraoral scan, a 3D-printed (PB2) and a milled base (MB2) were fabricated. On each base, a platform with a hook consisting of a central notch orienting the force against the post dam (PD) and 2 lateral notches orienting the forces against the left (LT) and right (RT) tuberosities was set in the center of the outer surface of the base. A traction dynamometer was inserted in the hook and oriented into the corresponding notch by applying force until dislodgement. All bases were subsequently stored in artificial saliva for 2 weeks and scanned. Retention testing was repeated by using the same procedure. To evaluate trueness and to visualize the differences on a color map, the scan of the definitive cast and the intraoral scans were matched and compared in 3 dimensions. The Wilcoxon tests were used to compare the retention of the different bases (95% confidence interval, α=.05). RESULTS: Nineteen participants with a mean ±standard deviation age of 64.1 ±14.7 years completed the 4 study sessions. The retention of printed bases (PD: 16.08 ±15.28 N; LT: 14.98 ±14.72 N; RT: 11.28 ±9.57 N) and milled bases (PD:14.52 ±17.07 N; RT: 11.99 ±12.10 N; LT: 13.55 ±15.53 N) fabricated from conventional impressions presented significantly higher retentive forces than those printed (PD: 6.21 ±4.72 N; RT:5.12 ±2.78 N; LT: 4.45 ±2.77 N) and milled (PD: 6.58 ±4.92 N; RT: 4.65 ±2.63 N; LT: 5.02 ±3.58 N) from the intraoral scans (P<.05). The differences were significant in all directions of dislodgement, as well as after storage in artificial saliva for 2 weeks. Comparison of the 3D distances between the intraoral scan and the definitive cast revealed a mean deviation of 0.45 ±0.11 mm. CONCLUSIONS: Conventional impressions of the edentulous maxilla, including the clinical steps of border molding and posterior palatal seal compression, provide better retention than digital intraoral scans with both milled and 3D-printed denture bases.

Fit and retention of complete denture bases: Part I - Conventional versus CAD-CAM methods: A clinical controlled crossover study.

STATEMENT OF PROBLEM: Clinical evidence is sparse on whether dentures fabricated by computer-aided design and computer-aided manufacturing (CAD-CAM) methods afford superior fit and retention when compared with those fabricated conventionally. PURPOSE: The purpose of this clinical controlled crossover study was to evaluate the peak retention force and fit of CAD-CAM manufactured (3D-printed and milled) maxillary complete denture bases and conventional heat-polymerized bases (control). MATERIAL AND METHODS: Twenty participants with edentulous maxillary arches were recruited. Impressions were made with a border-molded custom tray, and the resulting definitive cast was scanned. The conventional base was manufactured on the definitive cast with a hook and a 45-degree platform with a central notch and 2 lateral notches. The scan of the definitive cast was used for the fabrication of a milled and a printed base. The platform and hook position on the conventional base were transferred digitally to the milled and printed bases. All bases were scanned. A traction dynamometer was orientated into the notches, and retention was evaluated in the post dam and tuberosity areas. Scans were imported into a comparison software program which matched scans to their corresponding reference and performed a 3-dimensional comparison. The Friedman and Wilcoxon tests were used to compare between groups (confidence interval: 95%, α=.05). RESULTS: Nineteen participants with a mean ±standard deviation age of 64.1 ±14.7 years completed all clinical sessions. No significant difference in peak retention was measured between milled (MB1), printed (PB1), and conventional (CB) bases in the post dam (CB: 12.44 ±9.62 N, PB1: 16.08 ±15.28 N, MB1: 14.52 ±17.07 N) and right tuberosity area (CB: 8.99 ±7.82 N, PB1: 11.28 ±9.57 N, MB1: 11.99 ±12.10 N). In the left tuberosity area, peak retention was lower for CB (10.03 ±8.39 N) than PB1 (14.98 ±14.72 N) and MB1 (13.55 ±15.53 N; P=.05). Compared with the definitive cast, the fit of the conventional base (0.18 ±0.01 mm) was closer than the printed (0.21 ±0.03 mm) and milled bases (0.21 ±0.02 mm) (P<.001). CONCLUSIONS: The CD bases manufactured by CAD-CAM techniques provided retention and fit similar to that of conventionally manufactured bases and can therefore be considered suitable techniques.

Clinical outcomes and costs of conventional and digital complete dentures in a university clinic: A retrospective study.

STATEMENT OF PROBLEM: Scientific data analyzing the clinical outcomes and costs of complete dentures fabricated by using conventional and computer-aided design and computer-aided manufacturing (CAD-CAM) processes are lacking. PURPOSE: The purpose of this retrospective study was to compare the treatment duration, financial costs, and postdelivery adjustments of CAD-CAM and conventional removable complete dentures. MATERIAL AND METHODS: Thirty-two edentulous participants (16 women, 16 men; age 35-85 years) who had received either CAD-CAM (n=16) or conventional (n=16) maxillary and mandibular removable complete dentures provided by prosthodontists with a minimum of 2 years of experience were evaluated. The CAD-CAM denture systems were either DDS-AV (AvaDent Digital Dental Solutions) (n=11) or DD-IV (Wieland Digital Denture) (n=5). The total treatment period (days) was recorded at 3 different time points (T0: preliminary alginate impression; T1: denture delivery; T2: last scheduled postdelivery adjustment). Adjustments during the follow-up (after T2) were noted and included the removal of areas of excessive pressure, relining, or repairs. The costs of the dental treatment and the laboratory fees were calculated. The Wilcoxon rank sum tests were used for statistical analysis (α=.05). RESULTS: No statistically significant difference regarding the treatment duration between digitally and conventionally fabricated removable complete dentures was found: T0-T1 (P=.889); T1-T2 (P=.675); T2- T3 (P=.978). No significant difference was found in the number adjustments for areas of excessive pressure, relines, or repairs (P=.757, P=1.000, P=1.000) during the period. Laboratory costs of CAD-CAM removable complete dentures were significantly lower than those of conventional removable complete dentures (P<.001), but clinical fees were similar between groups (P=.596), resulting in a reduction in the overall total costs for the CAD-CAM removable complete dentures (P=.011). Regarding the number of clinical visits, neither the group (conventional/CAD-CAM (P=.945)/DDS-AV/DD-IV [P=.848]) nor the interaction group (conventional/CAD-CAM and DDS-AV/DD-IV)/period (P=.084/P=.171) showed any significant differences. CONCLUSIONS: CAD-CAM removable complete dentures can be considered a viable alternative to conventional removable complete dentures regarding treatment duration, clinical and follow-up visits, adjustments, and maintenance requirements.