RESUMEN
Bioprosthetic heart valves (BHV) fabricated from glutaraldehyde-fixed heterograft tissue, such as bovine pericardium (BP), are widely used for treating heart valve disease, a group of disorders that affects millions. Structural valve degeneration (SVD) of BHV due to both calcification and the accumulation of advanced glycation end products (AGE) with associated serum proteins limits durability. We hypothesized that BP modified with poly-2-methyl-2-oxazoline (POZ) to inhibit protein entry would demonstrate reduced accumulation of AGE and serum proteins, mitigating SVD. In vitro studies of POZ-modified BP demonstrated reduced accumulation of serum albumin and AGE. BP-POZ in vitro maintained collagen microarchitecture per two-photon microscopy despite AGE incubation, and in cell culture studies was associated with no change in tumor necrosis factor-α after exposure to AGE and activated macrophages. Comparing POZ and polyethylene glycol (PEG)-modified BP in vitro, BP-POZ was minimally affected by oxidative conditions, whereas BP-PEG was susceptible to oxidative deterioration. In juvenile rat subdermal implants, BP-POZ demonstrated reduced AGE formation and serum albumin infiltration, while calcification was not inhibited. However, BP-POZ rat subdermal implants with ethanol pretreatment demonstrated inhibition of both AGE accumulation and calcification. Ex vivo laminar flow studies with human blood demonstrated BP-POZ enhanced thromboresistance with reduced white blood cell accumulation. We conclude that SVD associated with AGE and serum protein accumulation can be mitigated through POZ functionalization that both enhances biocompatibility and facilitates ethanol pretreatment inhibition of BP calcification.
Asunto(s)
Enfermedades de las Válvulas Cardíacas/tratamiento farmacológico , Enfermedades de las Válvulas Cardíacas/terapia , Oxazoles/farmacología , Pericardio/efectos de los fármacos , Animales , Materiales Biocompatibles , Calcificación Fisiológica/efectos de los fármacos , Calcinosis/tratamiento farmacológico , Calcinosis/metabolismo , Calcinosis/terapia , Línea Celular , Colágeno/metabolismo , Etanol/farmacología , Productos Finales de Glicación Avanzada/metabolismo , Enfermedades de las Válvulas Cardíacas/metabolismo , Prótesis Valvulares Cardíacas , Xenoinjertos/efectos de los fármacos , Humanos , Masculino , Oxidación-Reducción/efectos de los fármacos , Pericardio/metabolismo , Ratas , Ratas Sprague-Dawley , Células THP-1RESUMEN
OBJECTIVES: This study assessed the state of pediatric medical device (PMD) development by comparing PMD clinical trials to pediatric trials evaluating drugs and biologics, from 1999 to 2022. METHODS: The site www.clinicaltrials.gov was used to identify and quantify both PMD clinical trials and pediatric trials for drugs and biologics. Clinical specialty was also assessed. The institutions included were the 7 children's hospitals primarily affiliated with the Food and Drug Administration (FDA) Pediatric Device Consortia (PDC) grant program between 2018 and 2023. For a national comparison, an additional search assessed PMD trials across all US medical institutions. RESULTS: A total of 243 PMD clinical trials were identified at the FDA-PDC institutions on the basis of the year of initiation; the average number of PMD trials initiated per year per institution was 1.5 from 1999 to 2022. However, PMD trials significantly increased during the period 2014 to 2022 compared with 1999 to 2013 (P < .001); the rate of initiation of drug and biologic pediatric trials demonstrated no significant differences between these time periods. A national survey of all institutions initiating PMD trials, and drugs and biologics trials, identified 1885 PMD trials out of a total 12 943. A comparable trend was noted in the national survey with initiation of PMD trials increasing significantly from 2014 to 2022 (P < .001), compared with 1999 to 2013, whereas the rate of initiation of drug and biologic trials during these periods did not demonstrate a significant change. CONCLUSIONS: Although pediatric clinical trial initiation for drugs and biologics remained stable from 1999 to 2022, the rate of new PMD trials significantly increased during the period 2014 to 2022 at FDA-PDC institutions and nationally.
Asunto(s)
Ensayos Clínicos como Asunto , Humanos , Estados Unidos , Niño , Equipos y Suministros , United States Food and Drug Administration , Pediatría , Productos Biológicos/uso terapéutico , Hospitales Pediátricos , Aprobación de RecursosRESUMEN
BACKGROUND AND AIMS: Hypercholesterolemia (HC) has previously been shown to augment the restenotic response in animal models and humans. However, the mechanistic aspects of in-stent restenosis (ISR) on a hypercholesterolemic background, including potential augmentation of systemic and local inflammation precipitated by HC, are not completely understood. CD47 is a transmembrane protein known to abort crucial inflammatory pathways. Our studies have examined the interrelation between HC, inflammation, and ISR and investigated the therapeutic potential of stents coated with a CD47-derived peptide (pepCD47) in the hypercholesterolemic rabbit model. METHODS: PepCD47 was immobilized on metal foils and stents using polybisphosphonate coordination chemistry and pyridyldithio/thiol conjugation. Cytokine expression in buffy coat-derived cells cultured over bare metal (BM) and pepCD47-derivatized foils demonstrated an M2/M1 macrophage shift with pepCD47 coating. HC and normocholesterolemic (NC) rabbit cohorts underwent bilateral implantation of BM and pepCD47 stents (HC) or BM stents only (NC) in the iliac location. RESULTS: A 40 % inhibition of cell attachment to pepCD47-modified compared to BM surfaces was observed. HC increased neointimal growth at 4 weeks post BM stenting. These untoward outcomes were mitigated in hypercholesterolemic rabbits treated with pepCD47-derivatized stents. Compared to NC animals, inflammatory cytokine immunopositivity and macrophage infiltration of peri-strut areas increased in HC animals and were attenuated in HC rabbits treated with pepCD47 stents. CONCLUSIONS: Augmented inflammatory responses underlie severe ISR morphology in hypercholesterolemic rabbits. Blockage of initial platelet and leukocyte attachment to stent struts through CD47 functionalization of stents mitigates the pro-restenotic effects of hypercholesterolemia.
Asunto(s)
Reestenosis Coronaria , Hipercolesterolemia , Humanos , Animales , Conejos , Hipercolesterolemia/complicaciones , Antígeno CD47 , Reestenosis Coronaria/etiología , Reestenosis Coronaria/prevención & control , Modelos Animales de Enfermedad , Stents , Inflamación , Péptidos/farmacología , CitocinasRESUMEN
Degenerative mitral valve (MV) regurgitation (MR) is a highly prevalent heart disease that requires surgery in severe cases. Here, we show that a decrease in the activity of the serotonin transporter (SERT) accelerates MV remodeling and progression to MR. Through studies of a population of patients with MR, we show that selective serotonin reuptake inhibitor (SSRI) use and SERT promoter polymorphism 5-HTTLPR LL genotype were associated with MV surgery at younger age. Functional characterization of 122 human MV samples, in conjunction with in vivo studies in SERT-/- mice and wild-type mice treated with the SSRI fluoxetine, showed that diminished SERT activity in MV interstitial cells (MVICs) contributed to the pathophysiology of MR through enhanced serotonin receptor (HTR) signaling. SERT activity was decreased in LL MVICs partially because of diminished membrane localization of SERT. In mice, fluoxetine treatment or SERT knockdown resulted in thickened MV leaflets. Similarly, silencing of SERT in normal human MVICs led to up-regulation of transforming growth factor ß1 (TGFß1) and collagen (COL1A1) in the presence of serotonin. In addition, treatment of MVICs with fluoxetine not only directly inhibited SERT activity but also decreased SERT expression and increased HTR2B expression. Fluoxetine treatment and LL genotype were also associated with increased COL1A1 expression in the presence of serotonin in MVICs, and these effects were attenuated by HTR2B inhibition. These results suggest that assessment of both 5-HTTLPR genotype and SERT-inhibiting treatments may be useful tools to risk-stratify patients with MV disease to estimate the likelihood of rapid disease progression.
Asunto(s)
Insuficiencia de la Válvula Mitral , Válvula Mitral , Humanos , Animales , Ratones , Válvula Mitral/metabolismo , Insuficiencia de la Válvula Mitral/metabolismo , Fluoxetina/farmacología , Fluoxetina/uso terapéutico , Fluoxetina/metabolismo , Proteínas de Transporte de Serotonina en la Membrana Plasmática/genética , Proteínas de Transporte de Serotonina en la Membrana Plasmática/metabolismo , Serotonina/metabolismo , Serotonina/farmacología , Inhibidores Selectivos de la Recaptación de Serotonina/farmacología , Inhibidores Selectivos de la Recaptación de Serotonina/uso terapéuticoRESUMEN
Impaired endothelialization of endovascular stents has been established as a major cause of in-stent restenosis and late stent thrombosis. Attempts to enhance endothelialization of inner stent surfaces by pre-seeding the stents with endothelial cells in vitro prior to implantation are compromised by cell destruction during high-pressure stent deployment. Herein, we report on the novel stent endothelialization strategy of post-deployment seeding of biotin-modified endothelial cells to avidin-functionalized stents. Acquisition of an avidin monolayer on the stent surface was achieved by consecutive treatments of bare metal stents (BMS) with polyallylamine bisphosphonate, an amine-reactive biotinylation reagent and avidin. Biotin-modified endothelial cells retain growth characteristics of normal endothelium and can express reporter transgenes. Under physiological shear conditions, a 50-fold higher number of recirculating biotinylated cells attached to the avidin-modified metal surfaces compared to bare metal counterparts. Delivery of biotinylated endothelial cells to the carotid arterial segment containing the implanted avidin-modified stent in rats results in immediate cell binding to the stent struts and is associated with a 30% reduction of in-stent restenosis in comparison with BMS.
Asunto(s)
Reestenosis Coronaria , Ratas , Animales , Reestenosis Coronaria/etiología , Células Endoteliales , Avidina , Biotina , Stents/efectos adversos , Constricción Patológica/complicacionesRESUMEN
Despite many advances in designing biocompatible materials, inflammation remains a problem in medical devices and implants. We report two methods, microcontact printing and photodegradation by UV exposure, to pattern dextran and hyaluronic acid on glass, as well as demonstrate their utility for use as an anti-inflammatory biomaterial. The dextran/glass patterned surface can be further modified by grafting hyaluronic acid to glass, creating a binary polysaccharide patterned surface. We used two geometries, 90 µm squares and 22 µm stripes, to study the human macrophage (THP-1) adhesion on the patterned surfaces containing dextran, hyaluronic acid and the binary pattern. The results indicate that a majority of the macrophages are non-adherent on hyaluronic acid for three day culture. The ranking of surfaces according to macrophage adhesion is 3-aminopropyl triethoxysilane-modified glass culture dish, dextranized surfaces, glass, and hyaluronic acid-modified surfaces. On the binary pattern of dextran and hyaluronic acid, macrophages preferentially attach and adhere to the dextranized area. Patterned surfaces provide an excellent platform for mimicking the complexity of the glycocalyx and investigating the interface between this surface and cells. This binary polysaccharide pattern also offers a new route to address anti-inflammatory potential of surface coatings on biomaterials in a high through-put fashion.
RESUMEN
The blood compatibility of various intravascular (IV) devices (e.g., catheters, sensors, etc.) is compromised by activation of platelets that can cause thrombus formation and device failure. Such devices also carry a high risk of microbial infection. Recently, nitric oxide (NO) releasing polymers/devices have been proposed to reduce these clinical problems. CD47, a ubiquitously expressed transmembrane protein with proven anti-inflammation/anti-platelet properties when immobilized on polymeric surfaces, is a good candidate to complement NO release in both effectiveness and longevity. In this work, we successfully appended CD47 peptides (pepCD47) to the surface of biomedical grade polyurethane (PU) copolymers. SIRPα binding and THP-1 cell attachment experiments strongly suggested that the pepCD47 retains its biological properties when bound to PU films. In spite of the potentially high reactivity of NO toward various amino acid residues in CD47, the efficacy of surface-immobilized pepCD47 to prevent inflammatory cell attachment was not inhibited after being subjected to a high flux of NO for three days, demonstrating excellent compatibility of the two species. We further constructed a CD47 surface immobilized silicone tubing filled with NO releasing S-nitrosoglutathione/ascorbic acid (GSNO/AA) solution for synergistic biocompatibility evaluation. Via an ex vivo Chandler loop model, we demonstrate for the first time that NO release and CD47 modification could function synergistically at the blood/material interface and produce greatly enhanced anti-inflammatory/anti-platelet effects. This concept should be readily implementable to create a new generation of thromboresistant/antimicrobial implantable devices.
RESUMEN
The key complications associated with bare metal stents and drug eluting stents are in-stent restenosis and late stent thrombosis, respectively. Thus, improving the biocompatibility of metal stents remains a significant challenge. The goal of this protocol is to describe a robust technique of metal surface modification by biologically active peptides to increase biocompatibility of blood contacting medical implants, including endovascular stents. CD47 is an immunological species-specific marker of self and has anti-inflammatory properties. Studies have shown that a 22 amino acid peptide corresponding to the Ig domain of CD47 in the extracellular region (pepCD47), has anti-inflammatory properties like the full-length protein. In vivo studies in rats, and ex vivo studies in rabbit and human blood experimental systems from our lab have demonstrated that pepCD47 immobilization on metals improves their biocompatibility by preventing inflammatory cell attachment and activation. This paper describes the step-by step protocol for the functionalization of metal surfaces and peptide attachment. The metal surfaces are modified using polyallylamine bisphosphate with latent thiol groups (PABT) followed by deprotection of thiols and amplification of thiol-reactive sites via reaction with polyethyleneimine installed with pyridyldithio groups (PEI-PDT). Finally, pepCD47, incorporating terminal cysteine residues connected to the core peptide sequence through a dual 8-amino-3,6-dioxa-octanoyl spacer, are attached to the metal surface via disulfide bonds. This methodology of peptide attachment to metal surface is efficient and relatively inexpensive and thus can be applied to improve biocompatibility of several metallic biomaterials.
Asunto(s)
Células Sanguíneas/citología , Metales/farmacología , Péptidos/metabolismo , Prótesis e Implantes , Animales , Antiinflamatorios/farmacología , Antígenos CD/metabolismo , Antígenos de Diferenciación Mielomonocítica/metabolismo , Células Sanguíneas/efectos de los fármacos , Antígeno CD47/metabolismo , Adhesión Celular/efectos de los fármacos , Colorantes Fluorescentes/metabolismo , Humanos , Macrófagos/citología , Macrófagos/efectos de los fármacos , Microscopía Fluorescente , Monocitos/citología , Monocitos/efectos de los fármacos , Polietileneimina/química , Conejos , Ratas , Espectrometría de FluorescenciaRESUMEN
In-stent restenosis (ISR) and late stent thrombosis are the major complications associated with the use of metal stents and drug eluting stents respectively. Our lab previously investigated the use of peptide CD47 in improving biocompatibility of bare metal stents in a rat carotid stent model and our results demonstrated a significant reduction in platelet deposition and ISR. However, this study did not characterize the stability of the pepCD47 on metal surfaces post storage, sterilization and deployment. Thus, the objective of the present study was 1) to test the stability of the peptide post - storage, sterilization, exposure to shear and mechanical stress and 2) to begin to expand our current knowledge of pepCD47 coated metal surfaces into the preclinical large animal rabbit model. Our results show that the maximum immobilization density of pepCD47 on metal surfaces is approximately 350 ng/cm2. 100% of the pepCD47 was retained on the metal surface post 24 weeks of storage at 4 °C, exposure to physiological shear stress, and mechanical stress of stent expansion. The bioactivity of the pepCD47 was found to be intact post 24 weeks of storage and ethylene oxide sterilization. Finally our ex vivo studies demonstrated that compared to bare metal the rabbit pepCD47 coated surfaces showed - 45% reduced platelet adhesion, a 10-fold decrease in platelet activation, and 93% endothelial cell retention. Thus, our data suggests that pepCD47 coating on metal surfaces is stable and rabbit pepCD47 shows promising preliminary results in preventing thrombosis and not inhibiting the growth of endothelial cells. STATEMENT OF SIGNIFICANCE: Biocompatibility of bare metal stents is a major challenge owing to the significantly high rates of in-stent restenosis. Previously we demonstrated that peptide CD47 functionalization improves the biocompatibility of bare metal stents in rat model. A similar trend was observed in our ex vivo studies where rabbit blood was perfused over the rabbit pepCD47 functionalized surfaces. These results provide valuable proof of concept data for future in vivo rabbit model studies. In addition, we investigated stability of the pepCD47 on metal surface and observed that pepCD47 coating is stable over time and resistant to industrially relevant pragmatic challenges.
Asunto(s)
Antígeno CD47/química , Péptidos/farmacología , Acero Inoxidable/farmacología , Adulto , Animales , Células Sanguíneas/citología , Células Sanguíneas/efectos de los fármacos , Comunicación Celular/efectos de los fármacos , Células Endoteliales/citología , Células Endoteliales/efectos de los fármacos , Femenino , Humanos , Masculino , Metales/farmacología , Conejos , Resistencia al Corte , Esterilización , Estrés Mecánico , Propiedades de SuperficieRESUMEN
BACKGROUND: Local drug delivery from polymer-coated stents has demonstrated efficacy for preventing in-stent restenosis; however, both the inflammatory effects of polymer coatings and concerns about late outcomes of drug-eluting stent use indicate the need to investigate innovative approaches, such as combining localized gene therapy with stent angioplasty. Thus, we investigated the hypothesis that adenoviral vectors (Ad) could be delivered from the bare-metal surfaces of stents with a synthetic complex for reversible vector binding. METHODS AND RESULTS: We synthesized the 3 components of a gene vector binding complex: (1) A polyallylamine bisphosphonate with latent thiol groups (PABT), (2) a polyethyleneimine (PEI) with pyridyldithio groups for amplification of attachment sites [PEI(PDT)], and (3) a bifunctional (amine- and thiol-reactive) cross-linker with a labile ester bond (HL). HL-modified Ad attached to PABT/PEI(PDT)-treated steel surfaces demonstrated both sustained release in vitro over 30 days and localized green fluorescent protein expression in rat arterial smooth muscle cell cultures, which were not sensitive to either inhibition by neutralizing anti-Ad antibodies or inactivation after storage at 37 degrees C. In rat carotid studies, deployment of steel stents configured with PABT/PEI(PDT)/HL-tethered adenoviral vectors demonstrated both site-specific arterial Ad(GFP) expression and adenovirus-luciferase transgene activity per optical imaging. Rat carotid stent delivery of adenovirus encoding inducible nitric oxide synthase resulted in significant inhibition of restenosis. CONCLUSIONS: Reversible immobilization of adenovirus vectors on the bare-metal surfaces of endovascular stents via a synthetic complex represents an efficient, tunable method for sustained release of gene vectors to the vasculature.
Asunto(s)
Implantes Absorbibles , Estenosis Carotídea/prevención & control , Estenosis Carotídea/terapia , Técnicas de Transferencia de Gen , Terapia Genética/métodos , Stents , Adenoviridae/genética , Animales , Aorta/citología , Células Cultivadas , Reactivos de Enlaces Cruzados , Proteínas Fluorescentes Verdes/genética , Masculino , Metales , Músculo Liso Vascular/citología , Pruebas de Neutralización , Óxido Nítrico Sintasa de Tipo II/genética , Ratas , Ratas Sprague-Dawley , Prevención SecundariaRESUMEN
Polyurethane cardiovascular implants are subject to oxidation initiated surface degradation, which is mediated by monocyte-derived macrophages (MDM); this often leads to surface cracking and device failure. The present studies examined the hypothesis that covalently attaching antioxidant, di-tert-butylphenol (DBP), to the urethane nitrogens of a polyether polyurethane (PU) via bromo-alkylation reactions could prevent this problem. PU was configured with two dosages of DBP, 0.14 mM DBP/g PU of DBP (PU-DBP) and a more highly modified (HM) 0.40 mM DBP/g PU (PU-DBP-HM). THP-1 cells, a human MDM cell line, stimulated with phorbol ester and seeded on PU, PU-DBP, and PU-DBP-HM films were assessed for reactive oxygen species (ROS) production via a fluorescent based dihydrorhodamine-123 assay. Results from these studies showed a significant dose-dependent reduction of ROS levels for THP-1 cells seeded on PU-DBP versus unmodified PU. PU, PU-DBP, or PU-DBP-HM films were implanted into subdermal pouches of Sprague-Dawley rats. Films were explanted after 10 weeks and assessed for oxidative degradation via light and scanning electron microscopy (SEM) and Fourier transformation infrared spectroscopy (FTIR). Light microscopy showed extensive surface cracking, which was confirmed via SEM, on unmodified PU surfaces that was absent in both PU-DBP and PU-DBP-HM explanted films. FTIR analysis showed reduction in oxidation-induced ether crosslinking that was directly related to DBP dosages. It is concluded that modifying PU with the covalent attachment of an antioxidant confers biodegradation resistance in vivo in a dose dependent manner; this effect is likely due to quenching of the ROS generated by the adherent macrophages.
Asunto(s)
Materiales Biocompatibles/química , Fenoles/química , Poliuretanos/química , Animales , Línea Celular , Estabilidad de Medicamentos , Humanos , Macrófagos/metabolismo , Espectroscopía de Resonancia Magnética , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Prótesis e Implantes , Ratas , Ratas Sprague-Dawley , Especies Reactivas de Oxígeno/metabolismo , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Polyurethane (PU) components of cardiovascular devices are subjected to oxidation-initiated surface degradation, which leads to cracking and ultimately device failure. In the present study, we investigated a novel bromoalkylation chemical strategy to covalently attach the antioxidant, di-tert-butylphenol (DBP), and/or cholesterol (Chol) to the PU urethane nitrogen groups to hypothetically prevent oxidative degradation. These experiments compared PU, PU-DBP, PU-Chol, and PU-Chol-DBP. A series of comparative oxidative degradation studies involved exposing PU samples (modified and unmodified) to H2O2-CoCl2 for 15 days at 37 degrees C, to cause accelerated oxidative degradation. The extent and effects of degradation were assessed by attenuated total reflectance Fourier transformation infrared spectroscopy (FTIR), scanning electron microscopy (SEM), surface contact angle measurements, and mechanical testing. Both the Chol and DBP modification conferred significant resistance to oxidation related changes compared to unmodified PU per FTIR and SEM results. SEM demonstrated cavitation only in unmodified PU. However, contact angle analysis showed significant oxidation-induced changes only in the Chol-modified PU formulations. Most importantly, uniaxial stress-strain testing revealed that only PU-DBP demonstrated bulk elastomeric properties that were minimally affected by oxidation; PU, PU-Chol, PU-Chol-DBP showed marked deterioration of their stress-strain properties following oxidation. In conclusion, these results demonstrate that derivatizing PU with DBP confers significant resistance to oxidative degradation compared with unmodified PU.
Asunto(s)
Butanos/química , Fenol/química , Poliuretanos/química , Microscopía Electrónica de Rastreo , Oxidación-Reducción , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
OBJECTIVE: To explore the feasibility of utilizing two implantable devices made from modified polyurethane films with antibody tethered replication-defective adenoviruses encoding for green fluorescent protein (AdGFP) as gene delivery platforms. METHODS: Intra-aortic button implants of collagen-coated polyurethane films with antibody tethered AdGFP were sutured into the infrarenal aorta of adult pigs and pulmonary valve leaflet in juvenile sheep was replaced by polyurethane pulmonary valve cusp replacement with antibody-tethered AdGFP. After seven days, the buttons, prosthetic leaflets, and their surrounding tissues were explanted and evaluated for biocompatibility and AdGFP-mediated gene transfer by fluorescent microscopy and PCR analysis. RESULTS: In vivo analysis of gene transfer from collagen-coated polyurethane films in pig infrarenal aorta implants, one week explants of the collagen-coated polyurethane films demonstrated (14.2 +/- 2.5)% of neointimal cells on the surface of the implant. In sheep pulmonary valve leaflet replacement studies, polyurethane films with antibody tethered AdGFP vector demonstrated (25.1 +/- 5.7)% of cells attached to polyurethane valve leaflets were transduced in one week. PCR analyses showed that GFP DNA was not detectable in blood or distal tissues. CONCLUSION: Site-specific intravascular delivery of adenoviral vectors for gene therapy can be achieved with these two kinds of polyurethane implants utilizing the antivector antibody tethering mechanism.
Asunto(s)
Adenoviridae/genética , Prótesis Vascular , Técnicas de Transferencia de Gen , Terapia Genética/métodos , Prótesis Valvulares Cardíacas , Poliuretanos , Animales , Vectores Genéticos , Proteínas Fluorescentes Verdes/genética , Masculino , Poliuretanos/química , Implantación de Prótesis , Ovinos , PorcinosRESUMEN
Addressing the aberrant interactions between immune cells and biomaterials represents an unmet need in biomaterial research. Although progress has been made in the development of bioinert coatings, identifying and targeting relevant cellular and molecular pathways can provide additional therapeutic strategies to address this major healthcare concern. To that end, we describe the immune inhibitory motif, receptor-ligand pairing of signal regulatory protein alpha and its cognate ligand CD47 as a potential signaling pathway to enhance biocompatibility. The goals of this article are to detail the known roles of CD47-signal regulatory protein alpha signal transduction pathway and to describe how immobilized CD47 can be used to mitigate the immune response to biomaterials. Current applications of CD47-modified biomaterials will also be discussed herein.
Asunto(s)
Materiales Biocompatibles/metabolismo , Materiales Biocompatibles/farmacología , Antígeno CD47/metabolismo , Factores Inmunológicos/metabolismo , Factores Inmunológicos/farmacología , Animales , Materiales Biocompatibles/química , Humanos , Factores Inmunológicos/química , Transducción de SeñalRESUMEN
The effectiveness of endovascular stents is hindered by in-stent restenosis (ISR), a secondary re-obstruction of treated arteries due to unresolved inflammation and activation of smooth muscle cells in the arterial wall. We previously demonstrated that immobilized CD47, a ubiquitously expressed transmembrane protein with an established role in immune evasion, can confer biocompatibility when appended to polymeric surfaces. In present studies, we test the hypothesis that CD47 immobilized onto metallic surfaces of stents can effectively inhibit the inflammatory response thus mitigating ISR. Recombinant CD47 (recCD47) or a peptide sequence corresponding to the Ig domain of CD47 (pepCD47), were attached to the surfaces of both 316L-grade stainless steel foils and stents using bisphosphonate coordination chemistry and thiol-based conjugation reactions to assess the anti-inflammatory properties of CD47-functionalized surfaces. Initial in vitro and ex vivo analysis demonstrated that both recCD47 and pepCD47 significantly reduced inflammatory cell attachment to steel surfaces without impeding on endothelial cell retention and expansion. Using a rat carotid stent model, we showed that pepCD47-functionalized stents prevented fibrin and platelet thrombus deposition, inhibited inflammatory cell attachment, and reduced restenosis by 30%. It is concluded that CD47-modified stent surfaces mitigate platelet and inflammatory cell attachment, thereby disrupting ISR pathophysiology.
Asunto(s)
Antiinflamatorios/uso terapéutico , Antígeno CD47/uso terapéutico , Proteínas Inmovilizadas/uso terapéutico , Inflamación/prevención & control , Acero Inoxidable/química , Stents/efectos adversos , Trombosis/prevención & control , Animales , Antiinflamatorios/química , Plaquetas/efectos de los fármacos , Antígeno CD47/química , Arterias Carótidas/cirugía , Línea Celular , Materiales Biocompatibles Revestidos/química , Materiales Biocompatibles Revestidos/uso terapéutico , Humanos , Proteínas Inmovilizadas/química , Inflamación/etiología , Ratas , Trombosis/etiologíaRESUMEN
Gene therapy holds great promise for treating both genetic and acquired disorders. However, progress toward effective human gene therapy has been thwarted by a number of problems including vector toxicity, poor targeting of diseased tissues, and host immune and inflammatory activity to name but a few of the challenges. Gene therapy for cardiovascular disease has been the subject of many fewer clinical trials than other disorders such as cancer or cystic fibrosis. Nevertheless, the challenges are comparable. The present paper reports a review of investigations related to our hypothesis that site specific cardiovascular gene therapy represents an approach that can lead to both optimizing efficacy and reducing the impact of gene vector-related systemic adverse effects. We report experimental studies demonstrating proof of principle in three areas: gene therapy for heart valve disease, gene delivery stents, and gene therapy to treat cardiac arrhythmias. Heart valve disease is the second most common indication for open heart surgery and is now only treatable by surgical removal or repair of the diseased heart valve. Our investigations demonstrate that gene vectors can be immobilized on the surface of prosthetic heart valve leaflets thereby enabling a therapeutic genetic modification of host cells around the valve annulus and on the leaflet. Other animal studies have shown that vascular stents used to relieve arterial obstruction can also be used as gene delivery systems to provide therapeutic vector constructs that can both locally prevent post stenting reobstruction, known as in-stent restenosis, and treat the underlying vascular disease. Cardiac arrhythmias are the cause of sudden death due to heart disease and affect millions of others on a chronic basis. Our group has successfully investigated in animal studies localized gene therapy using an ion channel mutation to treat atrial arrhythmias.
Asunto(s)
Sistema Cardiovascular , Terapia Genética/métodos , Animales , Arritmias Cardíacas/terapia , Células Endoteliales/fisiología , Terapia Genética/instrumentación , Vectores Genéticos , Enfermedades de las Válvulas Cardíacas/terapia , Humanos , Plásmidos/genética , StentsRESUMEN
The timing of granule cell migration in the developing cerebellum is regulated by thyroid hormone. Granule cell migration depends on the recognition of extracellular neuronal guidance molecule(s), such as laminin, and this, in turn, requires cell surface adhesion molecules (integrins) that are anchored on the cell membrane by the actin cytoskeleton. While many of the actions of thyroid hormone, specifically 3,5,3'-triiodothyronine (T3), are mediated by regulated gene expression, both thyroxine (T4) and 3,3',5'-triiodothyronine (rT3) also exert direct, positive control of the quantity of polymerized actin in cultured astrocytes without affecting gene expression. T4-dependent actin polymerization has been shown to (i) participate in the immobilization of laminin to the cell surface, (ii) help deposit laminin in the molecular layer of the developing cerebellum, and (iii) anchor integrin(s) that recognize laminin present in the extracellular matrix. In this study, we show that both T4 and rT3, but not T3, directly regulate the F-actin content of elongating neurites of cerebellar neurons. T4 and rT3 also promoted extensive granule cell migration from cerebellar explants, as well as, dense cell clustering and extensive neuronal process formation when granule cells were grown on a laminin-coated surface. Both granule cell migration and neuronal process outgrowth were markedly attenuated by the addition of integrin-blocking antibodies or binding peptides, by the absence of thyroid hormone or the presence of T3. These data suggest that the T4-dependent actin polymerization in developing neurons is necessary for these migrating cells to recognize the laminin guidance molecule, thereby providing a novel molecular mechanism for the profound influence of thyroid hormone on brain development that is independent of regulated gene expression.
Asunto(s)
Diferenciación Celular/fisiología , Movimiento Celular/fisiología , Cerebelo/citología , Neuritas/metabolismo , Tiroxina/metabolismo , Triyodotironina Inversa/metabolismo , Citoesqueleto de Actina/efectos de los fármacos , Citoesqueleto de Actina/metabolismo , Actinas/efectos de los fármacos , Actinas/metabolismo , Animales , Animales Recién Nacidos , Diferenciación Celular/efectos de los fármacos , Movimiento Celular/efectos de los fármacos , Células Cultivadas , Integrinas/antagonistas & inhibidores , Integrinas/metabolismo , Laminina/metabolismo , Laminina/farmacología , Neuritas/efectos de los fármacos , Ratas , Glándula Tiroides/metabolismo , Tiroxina/farmacología , Triyodotironina Inversa/farmacologíaRESUMEN
Endothelialization of synthetic surfaces has been challenging with limited success thus far. We investigated the hypothesis that covalent attachment of cholesterol to polyurethane via the urethane nitrogen groups would create a high-affinity surface for attachment and adhesion of endothelial cells. Cholesterol was covalently bound to the polyether polyurethane, Tecothane, by first derivatizing the polyurethane nitrogen groups with bromoalkyl side chains, followed by reacting mercapto-cholesterol to the bromoalkyl sites. Cholesterol-modified polyurethane demonstrated a qualitatively smoother surface per atomic force microscopy than nonmodified and increased surface energy (contact angle measurements) compared with unmodified polyurethane. Cell attachment assays showed a significantly greater number of attached bovine arterial endothelial cells (p = 0.0003) after 45 min of seeding on cholesterol-modified polyurethane versus unmodified polyurethane. Bovine arterial endothelial cells cultivated on cholesterol-modified Tecothane showed significantly greater levels of cell retention compared with unmodified Tecothane when exposed to arterial level shear stress for 2 h (25 dynes/cm2) with 90.0 +/- 6.23% cells remaining adherent compared with unmodified polyurethane, 41.4 +/- 11.7%, p = 0.0070. Furthermore, ovine endothelial precursors, obtained as blood outgrowth endothelial cells, were seeded on cholesterol-modified polyurethane and exposed to 25 dynes/cm2 shear conditions for 2 h, with the retention of 90.30 +/- 3.25% of seeded cells versus unmodified polyurethane, which retained only 4.56 +/- 0.85% (p < 0.001). It is concluded that covalently linking cholesterol to polyurethane results in improved material properties that permit increased endothelial cell retention compared with unmodified polyurethane.
Asunto(s)
Colesterol/química , Células Endoteliales/citología , Poliuretanos/química , Animales , Bovinos , Adhesión Celular , Proliferación Celular/efectos de los fármacos , Células Cultivadas , Cinética , Espectroscopía de Resonancia Magnética , Microscopía de Fuerza Atómica , Estructura Molecular , Espectroscopía Infrarroja por Transformada de Fourier , Estrés Mecánico , TemperaturaRESUMEN
OBJECTIVE: Calcification of polyurethane prosthetic valve leaflets causes a major functional impairment. Previously we showed that polyurethane heart valves modified with covalently linked bisphosphonate groups were resistant to calcification in vivo. However, we also found that the highly polar anionic bisphosphonate groups on the polyurethane surface attracted sodium counter ion adsorption, and thereby increased the elastomer's water absorption to 20% of total weight. In this study we address the increased water absorption by investigating the hypothesis that covalently attaching cationic diethylamino groups to the bisphosphonate-modified polyurethane will reduce water absorption. Thus we evaluated the mechanical and in vivo anticalcification properties of heart-valve leaflets composed of this modified polymer. METHODS: Diethylamino and bisphosphonate groups (DBP) were appended to the polyurethane Biospan's hard segment using previously published bromoalkylation methodology. Water absorption and biaxial mechanical and uniaxial failure testing were used to determine the mechanical properties of the DBP-modified polymer. Rat subdermal implants (60 days) and extended (150 days) single pulmonary leaflet replacements in juvenile sheep provided in vivo assessments of the bisphosphonate-modified polyurethane. RESULTS: The water absorption properties of the DBP-modified polymers and unmodified polyurethanes were 1.86 and 2.3 %, respectively. Biaxial mechanical tests showed the DBP-modified polymer was more compliant than the unmodified control material, but all polymeric material had similar uniaxial failure properties. In both rat subdermal and sheep circulatory implants, the DBP-modified polyurethane resisted calcification, as assessed by scanning electron microscopy, with complete calcification inhibition in prosthetic sheep valve leaflet replacements. CONCLUSION: DBP polyurethane possesses physical (water absorption) and biomechanical properties comparable to unmodified polyurethane and can resist intrinsic heart-valve leaflet calcification in blood-stream implants.
Asunto(s)
Prótesis Valvulares Cardíacas , Fosfatos/química , Poliuretanos/química , Válvula Pulmonar , Agua/química , Animales , Ensayo de Materiales , Ratas , OvinosRESUMEN
The foreign body reaction occurs when a synthetic surface is introduced to the body. It is characterized by adsorption of blood proteins and the subsequent attachment and activation of platelets, monocyte/macrophage adhesion, and inflammatory cell signaling events, leading to post-procedural complications. The Chandler Loop Apparatus is an experimental system that allows researchers to study the molecular and cellular interactions that occur when large volumes of blood are perfused over polymeric conduits. To that end, this apparatus has been used as an ex vivo model allowing the assessment of the anti-inflammatory properties of various polymer surface modifications. Our laboratory has shown that blood conduits, covalently modified via photoactivation chemistry with recombinant CD47, can confer biocompatibility to polymeric surfaces. Appending CD47 to polymeric surfaces could be an effective means to promote the efficacy of polymeric blood conduits. Herein is the methodology detailing the photoactivation chemistry used to append recombinant CD47 to clinically relevant polymeric blood conduits and the use of the Chandler Loop as an ex vivo experimental model to examine blood interactions with the CD47 modified and control conduits.