RESUMEN
OBJECTIVE: The aim of this multicenter, randomized controlled trial was to compare the clinical and radiographic outcomes of 6-mm or 11-mm implants, placed in the posterior maxilla and mandible, during a 5-year follow-up period. MATERIALS AND METHODS: Ninety-five patients with adequate bone height for 11-mm implants, were randomly allocated to a 6-mm group (test group with short implants) or an 11-mm group (control group with standard-length implants). Two or three implants of the same length were placed in each patient and after 6 weeks loaded with a splinted provisional restoration. This was followed by definitive splinted restoration 6 months after implant placement. Clinical and radiographic parameters, including the occurrence of complications were recorded. RESULTS: A total of 49 patients were enrolled to receive 6-mm implants (n = 108) and 46 patients to receive 11-mm implants (n = 101). Three implants (two of 6 mm and one of 11 mm in length) were lost before loading and one 6-mm implant after 15 months of function, and one 11-mm implant was lost during the first year of function. The 5-year survival rates were 96.0% and 98.9% in the 6-mm and 11-mm group, respectively. The mean marginal bone level changes 5 years post-loading were 0.01 ± 0.45 mm (bone gain) in the 6-mm group and -0.12 ± 0.93 mm (bone loss) in the 11-mm group (p = .7670). Clinical parameters, including plaque, bleeding on probing and pocket probing depth were not significantly different between the groups, and also technical complications were low. CONCLUSION: The clinical and radiographic outcomes of 6-mm short and 11-mm standard-length implants were not different during a 5-year evaluation period.
Asunto(s)
Pérdida de Hueso Alveolar , Implantes Dentales , Carga Inmediata del Implante Dental , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/etiología , Implantación Dental Endoósea , Diseño de Prótesis Dental , Prótesis Dental de Soporte Implantado , Fracaso de la Restauración Dental , Estudios de Seguimiento , Humanos , Resultado del TratamientoRESUMEN
OBJECTIVES: The present multi-center randomized controlled clinical trial sought to compare the marginal bone level (MBL) changes and survival of 6- and 11-mm implants. MATERIAL AND METHODS: Ninety-five patients receiving a total of 209 dental implants were enrolled. Subjects were randomly allocated to two cohorts: test (4.0 × 6 mm; N = 108) or control (4.0 × 11 mm; N = 101) implant groups. To be randomized, all edentulous sites were anatomically qualified to receive 11 mm implant. Two to three implants were placed in maxillary or mandibular posterior regions and loaded with splinted provisional restoration after 6 weeks and definitive restoration 6 months thereafter. Test and control implants were followed by clinical and radiographic examinations on an annual basis up to 3 years. RESULTS: Radiographic assessment of MBL 3 years after loading revealed the bone to be located at 0.27 mm (±0.40) and 0.44 mm (±0.74) apical to the implant platform in the test and control groups, respectively. During the 3 years of follow-up since loading, 0.04 mm (±0.43) MBL gain and 0.02 mm (±0.76) of MBL loss were observed in the 6-mm (test) and 11-mm (control) groups, respectively. The MBL's for test and control were significantly different (p = 0.000) in favor of short implants. The cumulative survival rates from placement after 3 years were 96% and 99% for the 6- and 11-mm implants, respectively, with no statistical significance. CONCLUSIONS: Reconstruction of partially edentulous posterior maxilla or mandible with 6- or 11-mm implants led to stable marginal bone level and high implant survival rate after 3 years.
Asunto(s)
Pérdida de Hueso Alveolar , Implantación Dental Endoósea/instrumentación , Implantes Dentales , Diseño de Prótesis Dental , Arcada Parcialmente Edéntula/cirugía , Adulto , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/patología , Aumento de la Cresta Alveolar , Implantes Dentales/efectos adversos , Femenino , Estudios de Seguimiento , Humanos , Arcada Parcialmente Edéntula/diagnóstico por imagen , Arcada Parcialmente Edéntula/patología , Masculino , Persona de Mediana Edad , Radiografía DentalRESUMEN
OBJECTIVES: To objectively assess the influence that three different implant-abutment interface designs had on peri-implant mucosal esthetics at 1 year post-implant placement via the pink esthetic score (PES). Additionally, to demonstrate the novel employment of a tablet-based digital imaging format to reliably assess and score clinical images as part of a multicenter clinical trial according to PES criteria. MATERIALS AND METHODS: Adult subjects (n = 141) with healed tooth-bound edentulous sites in the anterior maxilla as well as first premolar region were randomized to receive one of three different implant-abutment interface designs (conical interface = CI; flat-to-flat interface = FI; or platform switch interface = PS). Immediate provisionalization was performed with prefabricated titanium abutments, with definitive custom CAD/CAM zirconia abutments and all-ceramic cement-based crowns being delivered 12-week post-implant placement. Bilateral (anterior sites) or unilateral (premolar sites) digital clinical photographs were made at 1, 3, 6, and 12 months post-implant placement. Five calibrated faculty evaluators of different clinical backgrounds scored images during a 4-week timeframe on a standardized, tablet-based, digital imaging format. RESULTS: Six hundred and forty-nine clinical photographs were evaluated resulting in a total of 3245 sum PES values and 22,715 individual PES values. Faculty evaluator intra- and inter-rater reliability was found to be "strong" (ICC = 0.84) and "substantial" (ICC = 0.64), respectively, demonstrating repeatability of both the PES, evaluator calibration, and standardization of tablet-based scoring. All implant-abutment interface groups demonstrated significant improvements in mean sum PESs up to 1 year, with the largest improvement between restoration delivery and 6 months. No significant differences were found between groups in mean sum PESs both for individual study visits as well as for changes between study visits. CONCLUSIONS: No significant differences in mean sum PESs were found between subjects randomized to three different implant-abutment interfaces. However, significant differences were found as a function of time for all three groups, with the largest improvement in mean sum PESs occurring between definitive abutment and restoration delivery and 6 months. Use of electronic, tablet-based digital imaging scoring formats represents a novel and repeatable methodology for scoring PES images in large, multicenter clinical trials.
Asunto(s)
Pilares Dentales , Implantación Dental Endoósea/métodos , Implantes Dentales , Estética Dental , Encía/anatomía & histología , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Cerámica , Diseño Asistido por Computadora , Coronas , Humanos , Maxilar , Persona de Mediana Edad , Fotograbar , Reproducibilidad de los Resultados , Titanio , CirconioRESUMEN
OBJECTIVES: Dental implant abutments are fundamental prosthetic components within dentistry that require optimal biocompatibility. The primary aim of this cross-sectional study was to preliminarily assess differences in the pro-inflammatory cytokine and bone metabolism mediator protein expression in the peri-implant crevicular fluid (PICF) adjacent to transmucosal abutments. MATERIAL AND METHODS: Abutments were fabricated from either titanium or zirconia in patients previously receiving single-tooth implant therapy. All subjects sampled in this study had an identical implant system and implant-abutment connection. Participants (n = 46) had an average time of clinical function for 22 months (6.2-72.8 months, ±SD 17 months) and received a clinical and radiographic examination of the implant site at the time of PICF sampling using a paper strip-based sampling technique. Cytokine, chemokine, and bone metabolism mediator quantities (picograms/30 s) were determined using a commercial 22-multiplexed fluorescent bead-based immunoassay instrument. A total of 19 pro-inflammatory cytokines and seven bone metabolism mediators were evaluated. RESULTS: Multivariable analyses provided no evidence of a group (titanium or zirconia), gender, or age effect with regard to the expression of pro-inflammatory mediators evaluated. Significant (P = 0.022) differences were observed for the bone mediator leptin, with titanium abutments demonstrating significantly elevated levels in comparison with zirconia. Osteopontin demonstrated a significant (P = 0.0044) correlation with age of the subjects. CONCLUSIONS: No significant differences in pro-inflammatory cytokine or bone metabolism mediator profiles were observed biochemically, with the exception of leptin, for the abutment biomaterials of titanium or zirconia The molecular PICF findings support the observed clinical biocompatibility of both titanium and zirconia abutments.
Asunto(s)
Citocinas/metabolismo , Pilares Dentales , Implantes Dentales de Diente Único , Líquido del Surco Gingival/química , Hormonas/metabolismo , Adulto , Anciano , Diseño Asistido por Computadora , Estudios Transversales , Diseño de Prótesis Dental , Femenino , Humanos , Masculino , Persona de Mediana Edad , Factores de Tiempo , Titanio , CirconioRESUMEN
STATEMENT OF PROBLEM: The fabrication of zirconium dioxide (ZrO2) dental prosthetic substructures requires an extended sintering process (8 to 10 hours) in a conventional oven. Microwave sintering is a shorter process (2 hours) than conventional sintering. PURPOSE: The purpose of this study was to compare the fracture toughness of 3 mol % Y2O3-stabilized ZrO2 sintered in a conventional or microwave oven. MATERIAL AND METHODS: Partially sintered ZrO2 specimens from 3 manufacturers, KaVo, Lava 3M, and Crystal HS were milled (KaVo Everest engine) and randomly divided into 2 groups: conventional sintering and microwave sintering (n=16 per group). The specimens were sintered according to the manufacturers' recommendations and stored in artificial saliva for 10 days. Fracture toughness was determined by using a 4-point bend test, and load to fracture was recorded. Mean fracture toughness for each material was calculated. A 2-way ANOVA followed by the Tukey HDS post hoc test was used to assess the significance of sintering and material effects on fracture toughness, including an interaction between the 2 factors (α=.05). RESULTS: The 2-way ANOVA suggested a significant main effect for ZrO2 manufacturer (P<.001). The post hoc Tukey HSD test indicated that mean fracture toughness for the KaVo ZrO2 (5.85 MPa·m(1/2) ±1.29) was significantly higher than for Lava 3M (5.19 MPa·m(1/2) ±0.47) and Crystal HS (4.94 MPa·m(1/2) ±0.66) (P<.05) and no significant difference was observed between Lava 3M and Crystal HS (P>.05). The main effect of the sintering process (Conventional [5.30 MPa·m(1/2) ±1.00] or Microwave [5.36 MPa·m(1/2) ±0.92]) was not significant (P=.76), and there was no interaction between sintering and ZrO2 manufacturer (P=.91). CONCLUSIONS: Based on the results of this study, no statistically significant difference was observed in the fracture toughness of ZrO2 sintered in microwave or conventional ovens.
Asunto(s)
Cerámica/química , Materiales Dentales/química , Itrio/química , Circonio/química , Fenómenos Químicos , Cristalografía , Materiales Dentales/efectos de la radiación , Estudios de Factibilidad , Calor , Humanos , Ensayo de Materiales , Microondas , Docilidad , Saliva Artificial/química , Estrés Mecánico , Propiedades de Superficie , Factores de Tiempo , Itrio/efectos de la radiación , Circonio/efectos de la radiaciónRESUMEN
The landscape of dental education is undergoing a paradigm shift from both the learner's and teacher's perspectives. Evolving technologies, including artificial intelligence, virtual reality, augmented reality, and mixed reality, are providing synergistic opportunities to create new and exciting educational platforms. The evolution of these platforms will likely play a significant role in dental education. This is especially true in the wake of calamities like the COVID-19 pandemic during which educational activities had to be shutdown or moved online. This experience demonstrated that it is prudent to develop curricula that are both agile and efficient via creating hybrid courses that provide effective learning experiences regardless of the mode of delivery. Although there is growing interest in incorporating technology into dental education, there are few examples of how to actually manage the implementation of technology into the curriculum. In this paper, we provide a road map for incorporating technology into the dental curriculum to create agility and discuss challenges and possible solutions.
Asunto(s)
COVID-19 , Educación en Odontología , Humanos , Pandemias , Inteligencia Artificial , COVID-19/epidemiología , Curriculum , TecnologíaRESUMEN
Purpose: To quantify the cumulative oral implant survival rates and changes in radiographic bone levels based on the configuration of the implant-abutment connection type over time. Materials and Methods: An electronic literature search was conducted in four databases (PubMed/MEDLINE, Cochrane Library, Web of Science, and Embase), and records were refereed by two independent reviewers based on the inclusion criteria. Data from included articles were grouped by implant-abutment connection type into four categories ([1] external hex; [2] bone level, internal, narrow cone < 45 degrees; [3] bone level, internal wide cone ≥ 45 degrees or flat; and [4] tissue level) and duration of follow-up (short-term 1 to 2 years, mid-term 2 to 5 years, and long-term > 5 years). Meta-analyses were performed for cumulative survival rate (CSR) and changes in marginal bone level (ΔMBL) from baseline (loading) to last reported follow-up. Studies were split or merged as appropriate based on the implants and follow-up duration in the study and trial design. The study was compiled under PRISMA 2020 guidelines and registered in the PROSPERO database. Results: A total of 3,082 articles were screened. Full-text review of 465 articles resulted in a total of 270 articles (representing 16,448 subjects with 45,347 implants) included for quantitative synthesis and analysis. Mean ΔMBL (95% CI) was as follows: short-term external hex = 0.68 mm (0.57, 0.79); short-term bone level, internal, narrow cone < 45 degrees = 0.34 mm (0.25, 0.43); short-term bone level, internal wide cone ≥ 45 degrees = 0.63 mm (0.52, 0.74); short-term tissue level = 0.42 mm (0.27, 0.56); mid-term external hex = 1.03 mm (0.72, 1.34); mid-term bone level, internal, narrow cone < 45 degrees = 0.45 mm (0.34, 0.56); mid-term bone level, internal wide cone ≥ 45 degrees = 0.73 mm (0.58, 0.88); mid-term tissue level = 0.4 mm (0.21, 0.61); long-term external hex = 0.98 mm, 0.70, 1.25); long-term bone level, internal, narrow cone < 45 degrees = 0.44 mm (0.31, 0.57); long-term bone level, internal wide cone ≥ 45 degrees = 0.95 mm (0.68, 1.22); and long-term tissue level = 0.43 mm (0.24, 0.61). CSRs (95% CI) were: short-term external hex = 97% (96%, 98%); short-term bone level, internal, narrow cone < 45 degrees = 99% (99%, 99%); short-term bone level, internal wide cone ≥ 45 degrees = 98% (98%, 99%); short-term tissue level = 99% (98%, 100%); mid-term external hex = 97% (96%, 98%); mid-term bone level, internal, narrow cone < 45 degrees = 98% (98%, 99%); mid-term bone level, internal wide cone ≥ 45 degrees = 99% (98%, 99%); mid-term tissue level = 98% (97%, 99%); long-term external hex = 96% (95%, 98%); long-term bone level, internal, narrow cone < 45 degrees = 98% (98%, 99%); long-term bone level, internal wide cone ≥ 45 degrees = 99% (98%, 100%); and long-term tissue level = 99% (98%, 100%). Conclusion: The configuration of the implant-abutment interface has a measurable effect on the ΔMBL over time. These changes can be observed over a period of at least 3 to 5 years. At all measured time intervals, similar ΔMBL was noted for external hex and internal wide cone ≥ 45-degree connections, as were internal, narrow cone < 45-degree and tissue-level connections.
Asunto(s)
Implantes Dentales , Prótesis Maxilofacial , Humanos , Tasa de SupervivenciaRESUMEN
PURPOSE: The objective of this study was to compare patient-reported outcomes (PROs) of periimplant soft tissue inflammation and aesthetics around single-tooth implants in the anterior maxillary region with three different implant-abutment interface designs. METHODS: Participants were randomized to one of three different types of implant-abutment interface designs [Conical (CI), flat-to-flat (FI), and Platform Switched (PS)]. Implants and provisional crowns with prefabricated titanium abutments were placed 5 months following extraction and/or ridge augmentation. Permanent ceramic crowns with zirconia abutments were placed after 12 weeks. To assess PROs, appearance and inflammation questionnaires were completed from provisional crown placement to the 3-year follow-up. RESULTS: Tooth appearance at the 3-year follow-up revealed a difference amongst CI, FI and PS implants (p=0.049; Kruskal-Wallis test). PS was rated better than FI (p=0.047) at 1 year for appearance of soft-tissue and satisfaction with colour. There were no differences for self-consciousness, smile and pain/discomfort while eating/hard food items. CONCLUSIONS: Although participants tended to rate the health of mucosa around PS implants as slighty better than the other two implant systems, the differences were minimal and inconsistent. Thus, patient satisfaction in terms self-perceived gingival health and esthetics was high for all 3 systems tested, suggesting that patients are unable to detect mucosal inflammation. CLINICAL SIGNIFICANCE: Patients find it difficult to perceive mucosal inflammation; hence, it is recommended that patients attend implant follow-up visits, even if they do not perceive inflammation. The study suggests that there is a relationship between the PROs and the clinical outcomes of tested implants.
Asunto(s)
Implantes Dentales de Diente Único , Diente , Humanos , Estética Dental , Implantación Dental Endoósea/efectos adversos , Implantación Dental Endoósea/métodos , Coronas , Circonio , Inflamación , Pilares DentalesRESUMEN
PURPOSE: This study analyzed baseline and post-fatigue reverse-torque values (RTVs) for a specific brand control abutment relative to a third party compatible abutment. The purpose of this study was to compare the abutments' fatigue resistance to simulated function, using RTVs as an indication of residual preload at the implant/abutment interface. MATERIALS AND METHODS: Forty Straumann tissue-level implants were mounted in resin and divided into four groups (n = 10). Forty abutments were seated, 20 control and 20 third-party abutments, according to manufacturer guidelines. Ten abutments from each manufacturer were evaluated for RTV without fatigue loading, using a calibrated digital torque gauge to provide a baseline RTVs. Fatigue loading was carried out on the remaining ten specimens from each manufacturer according to ISO 14801 guidelines. A moving-magnet linear motor was used to load one specimen per sequence, alternating from 10 to 200 N at 15 Hz for 5×10(6) cycles. RTV was recorded post-fatigue loading. The results were subjected to two-sample t-testing and two-way ANOVA. Scanning electron microphotography was carried out on three specimens from both manufacturers at baseline and post-fatigue cycling to visualize thread geometry and the abutment/implant interface. RESULTS: The data indicated that mean post-fatigue RTV observed for the control group was significantly higher than the third-party group (RTV 42.65 ± 6.70 N vs. 36.25 ± 2.63 N, p= 0.0161). Visual differences at the macro/microscopic level were also apparent for thread geometry, with third-party abutments demonstrating considerably greater variation in geometrical architecture than control specimens. CONCLUSIONS: Within the limitations of this in vitro model, the effect of component manufacturer resulted in a significantly higher RTV in the control group (two-way ANOVA, p= 0.0032) indicating greater residual preload; however, there was no significant decrease in post-fatigue RTV for either manufacturer compared to baseline.
Asunto(s)
Diseño de Implante Dental-Pilar , Análisis del Estrés Dental , Humanos , Estrés Mecánico , Propiedades de Superficie , Torsión MecánicaRESUMEN
Knowledge about the detection potential and detection rates of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in various body fluids and sites is important for dentists since they, directly or indirectly, deal with many of these fluids/sites in their daily practices. In this study, we attempt to review the latest evidence and meta-analysis studies regarding the detection rate of SARS-CoV-2 in different body specimens and sites as well as the characteristics of these sample. The presence/detection of SARS-CoV-2 viral biomolecules (nucleic acid, antigens, antibody) in different clinical specimens depends greatly on the specimen type and timing of collection. These specimens/sites include nasopharynx, oropharynx, nose, saliva, sputum, bronchoalveolar lavage, stool, urine, ocular fluid, serum, plasma and whole blood. The relative detection rate of SARS-CoV-2 viral biomolecules in each of these specimens/sites is reviewed in detail within the text. The infectious potential of these specimens depends mainly on the time of specimen collection and the presence of live replicating viral particles.
RESUMEN
BACKGROUND: The dental office potentially possesses all transmission risk factors for severe acute respiratory syndrome coronavirus 2. Anticipating the future widespread use of COVID-19 testing in dental offices, the authors wrote this article as a proactive effort to provide dental health care providers with current and necessary information surrounding the topic. METHODS: The authors consulted all relevant and current guidelines from the Centers for Disease Control and Prevention and the US Food and Drug Administration, as well as online resources and review articles. RESULTS: Routine COVID-19 screening and triage protocols are unable to detect all infected people. With the advancements in diagnostic tools and techniques, COVID-19 testing at home or in the dental office may provide dentists with the ability to evaluate the disease status of their patients. At-home or point-of-care (POC) tests, providing results within minutes of being administered, would allow for appropriate measures and rapid decisions about dental patients' care process. In this review, the authors provide information about available laboratory and POC COVID-19 screening methods and identify and elaborate on the options available for use by dentists as well as the regulatory requirements of test administration. CONCLUSIONS: Dentists need to be familiar with COVID-19 POC testing options. In addition to contributing to public health, such tests may deliver rapid, accurate, and actionable results to clinical and infection control teams to enhance the safe patient flow in dental practices. PRACTICAL IMPLICATIONS: Oral health care must continue to offer safety in this or any future pandemics. Testing for severe acute respiratory syndrome coronavirus 2 at the POC offers a control mechanism contributing to and enhancing the real and perceived safety of care in the dental office setting.
Asunto(s)
Prueba de COVID-19 , COVID-19 , Consultorios Odontológicos , Humanos , Laboratorios , Sistemas de Atención de Punto , SARS-CoV-2RESUMEN
PURPOSE: Evaluations of multicenter clinical trials are needed to determine the effectiveness of care in routine implant therapy in clinical practice. MATERIALS AND METHODS: Ninety-two clinicians in 75 clinics in 13 countries recruited five subjects per clinic who were in need of a minimum of two dental implants to restore a partially edentulous quadrant and were followed for a minimum of 1 year after loading. A centralized Internet-based case report form was developed to coordinate data recording. Data entry was done by each clinic, with follow-up source verification. RESULTS: The study recruited 549 subjects in 101 clinics with 1,893 implants placed. Three hundred forty subjects completed the 1-year recall (gender distribution of 56% female, 44% male; mean age of 57 years with a range of 18 to 84 years). In all, 1,246 dental implants were followed; a majority of subjects had two to four implants. Twenty-eight percent of subjects received osseous grafting prior to or coincident with implant placement. In the maxilla, 779 (63%) implants were placed, 256 in the anterior and 523 in the posterior; in the mandible, 467 implants were placed, 85 in the anterior and 382 in the posterior arch. The median edentulous period prior to implant placement was 24 months (range, 0 to 480 months); 46% of all patients received implants within 12 months of tooth loss. At 1 year after prosthesis insertion, 15 subjects had lost a total of 17 implants, for a cumulative implant survival rate of 98.6%. Chi-square and Fisher exact tests indicated a higher risk of implant loss at sites with advanced resorption and for wider-diameter implants (5-mm tapered body). There was no statistical relationship with implant loss relative to implant length or anatomic location within the oral cavity. CONCLUSIONS: The outcomes support the need for ongoing involvement of clinicians in routine practice assessments of patient-based outcomes of implant therapy.
Asunto(s)
Implantes Dentales , Arcada Parcialmente Edéntula/cirugía , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Pérdida de Hueso Alveolar/cirugía , Aumento de la Cresta Alveolar/estadística & datos numéricos , Estudios de Cohortes , Implantes Dentales/estadística & datos numéricos , Diseño de Prótesis Dental , Registros Odontológicos , Fracaso de la Restauración Dental , Femenino , Estudios de Seguimiento , Humanos , Internet , Arcada Parcialmente Edéntula/rehabilitación , Masculino , Mandíbula/cirugía , Maxilar/cirugía , Persona de Mediana Edad , Factores de Riesgo , Análisis de Supervivencia , Resultado del Tratamiento , Adulto JovenRESUMEN
Bone adaptation or integration of an implant is characterized by a series of biological reactions that start with bone turnover at the interface (a process of localized necrosis), followed by rapid repair. The wound healing response is guided by a complex activation of macrophages leading to tissue turnover and new osteoblast differentiation on the implant surface. The complex role of implant surface topography and impact on healing response plays a role in biological criteria that can guide the design and development of future tissue-implant surface interfaces.
Asunto(s)
Inflamación , Osteogénesis , Prótesis e Implantes , Cicatrización de Heridas , Implantes Dentales/efectos adversos , Humanos , Prótesis e Implantes/efectos adversos , Propiedades de Superficie , Titanio/químicaRESUMEN
Purpose: This pilot study aimed to evaluate the association between women's depression risk and their children's return for dental treatment. Methods: A total of 175 female caregivers of children presenting for an initial dental examination between May and October 2019 at a university clinic answered demographic questions and a validated survey on depression risk. An analysis of caregiver's depression risk relative to children's attendance at the next treatment appointment was made. Results: One hundred and eight female caregivers were included in the analysis. Average age was 33 years (standard deviation ± 6.5 years), and 52 percent were Hispanic. The rate of risk for depression was 17.5 percent. Most women at risk lived at least 20 miles away, had an income of less than $29,999, were unemployed or employed part-time, and had no help with childcare. White caregivers were more likely to fail to attend their child's appointment (chi-square [X²] = 7.80, P=0.02) while Hispanic women were more likely to return (X² = 4.10, P=0.04). Caregivers with low depression risk were more likely to return for the child's scheduled appointment (X² = 13.37, P<0.001). Thus, there was a positive association between high depression risk and failed appointments (r=0.474, P<0.01). Conclusion: Children of women at risk for depression are more likely to fail to attend their dental appointment.
Asunto(s)
Cuidadores , Depresión , Adulto , Citas y Horarios , Niño , Femenino , Humanos , Proyectos Piloto , Encuestas y CuestionariosRESUMEN
PURPOSE: To evaluate the influence that three different implant-abutment interface designs had on peri-implant mucosal outcomes as assessed by the pink esthetic score (PES) 3 years after delayed implant placement and immediate provisionalization. MATERIALS AND METHODS: Adult subjects (n = 141) requiring replacement of a bounded single tooth in the anterior maxilla as well as first premolar sites were randomized to receive one of three unique implant-abutment interface designs (conical interface [CI]; flat-to-flat interface [FI]; or platform-switch interface [PS]). Treatment included immediate provisionalization with prefabricated titanium abutments, followed by custom computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia abutments and cement-retained, all-ceramic crowns delivered after 12 weeks. Bilateral (anterior sites) or unilateral (premolar sites) digital clinical photographs were made at 1, 3, 6, 12, 24, and 36 months post-implant placement. Five calibrated faculty evaluators who previously scored the 1-year PES image dataset scored the 24- and 36-month photographs using a digital, cloud-based tablet interface. RESULTS: Six hundred ten clinical photographs were evaluated, resulting in a total of 3,050 sum PES values and 21,350 individual PES values. Faculty evaluator intrarater and interrater reliability were found to be "substantial," with intraclass correlation coefficient (ICC) values of 0.76 and 0.77, respectively. All three implant-abutment interface groups demonstrated acceptable esthetics at 3 years (mean sum PES = 10.1 ± 1.9, 4.0 to 13.2), with no single group demonstrating significantly greater mean sum PES values than another at the 3-year follow-up or at any recall interval in between. CONCLUSION: No significant differences were observed in mean sum PES scores for subjects randomized to one of three different implant-abutment interface geometries. Within the limitations of this study thus far, the first 6 months following definitive prosthesis delivery appear to still be the most significant with regard to improvement in PES outcomes for all three treatment groups.