RESUMEN
The introduction of molecular complexity in an atom- and step-efficient manner remains an outstanding goal in modern synthetic chemistry. Artificial biosynthetic pathways are uniquely able to address this challenge by using enzymes to carry out multiple synthetic steps simultaneously or in a one-pot sequence1-3. Conducting biosynthesis ex vivo further broadens its applicability by avoiding cross-talk with cellular metabolism and enabling the redesign of key biosynthetic pathways through the use of non-natural cofactors and synthetic reagents4,5. Here we describe the discovery and construction of an enzymatic cascade to MK-1454, a highly potent stimulator of interferon genes (STING) activator under study as an immuno-oncology therapeutic6,7 (ClinicalTrials.gov study NCT04220866 ). From two non-natural nucleotide monothiophosphates, MK-1454 is assembled diastereoselectively in a one-pot cascade, in which two thiotriphosphate nucleotides are simultaneously generated biocatalytically, followed by coupling and cyclization catalysed by an engineered animal cyclic guanosine-adenosine synthase (cGAS). For the thiotriphosphate synthesis, three kinase enzymes were engineered to develop a non-natural cofactor recycling system in which one thiotriphosphate serves as a cofactor in its own synthesis. This study demonstrates the substantial capacity that currently exists to use biosynthetic approaches to discover and manufacture complex, non-natural molecules.
Asunto(s)
Guanosina , Nucleotidiltransferasas , Adenosina , Animales , Interferones , Proteínas de la Membrana/genética , Proteínas de la Membrana/metabolismo , Nucleotidiltransferasas/metabolismo , Transducción de SeñalRESUMEN
PURPOSE: To evaluate the utility of meniscus allografts in combination with other procedures to delay knee arthroplasty in patients older than 50 years previously advised joint arthroplasty. METHODS: A total of 108 meniscus allograft transplants using the arthroscopic 3-tunnel technique between 1997 and 2019 in patients older than 50 years were retrospectively reviewed with a 2-year minimum follow-up period. Inclusion criteria were patients recommended for knee arthroplasty with pain and preservation of some joint space by standing flexion radiographs. Exclusion criteria were lack of joint space, failure to comply with rehabilitation protocol, and failure to complete research questionnaires. International Knee Documentation Committee composite and isolated pain scale were evaluated longitudinally. Time from meniscus allograft transplant to arthroplasty was measured, with failure defined as allograft excision or revision, progression to arthroplasty, or same or increased pain. RESULTS: Eighty-six of 108 (79.6%) patients met eligibility criteria. Over the follow-up mean 8.55 (range 0.68 to 25.2) years, 42 of 87 (48.2%) grafts progressed to arthroplasty with mean time of 8.64 (median 8.05) years. Concomitant procedures did not have significant impact on survival; however, survival medians were higher among paste graft and chondroplasty and lower among osteotomy groups. At the time of reporting, 41 of 84 (48.8%) patients had intact meniscus transplants, demonstrating significant improvements (P < .001) in pain and function as assessed by International Knee Documentation Committee Score. These improvements were sustained 10 years postoperatively, correlated to a mean of 65.8 years of age. At least 50% of patients achieved Minimal Clinically Important Difference through 10 years postoperatively. CONCLUSIONS: Meniscus allografts in combination with other arthroscopic interventions delay knee arthroplasty and improve knee symptoms of pain and function in a population of knee arthroplasty candidates older than 50 years. Influences of concomitant procedures cannot be defined. LEVEL OF EVIDENCE: Level IV, therapeutic case series, retrospective.
RESUMEN
In situ techniques are essential to understanding the behavior of electrocatalysts under operating conditions. When employed, in situ synchrotron grazing-incidence X-ray diffraction (GI-XRD) can provide time-resolved structural information of materials formed at the electrode surface. In situ cells, however, often require epoxy resins to secure electrodes, do not enable electrolyte flow, or exhibit limited chemical compatibility, hindering the study of non-aqueous electrochemical systems. Here, a versatile electrochemical cell for air-free in situ synchrotron GI-XRD during non-aqueous Li-mediated electrochemical N2 reduction (Li-N2R) has been designed. This cell not only fulfills the stringent material requirements necessary to study this system but is also readily extendable to other electrochemical systems. Under conditions relevant to non-aqueous Li-N2R, the formation of Li metal, LiOH and Li2O as well as a peak consistent with the α-phase of Li3N was observed, thus demonstrating the functionality of this cell toward developing a mechanistic understanding of complicated electrochemical systems.
RESUMEN
Adenosine triphosphate (ATP) provides the driving force necessary for critical biological functions in all living organisms. In synthetic biocatalytic reactions, this cofactor is recycled in situ using high-energy stoichiometric reagents, an approach that generates waste and poses challenges with enzyme stability. On the other hand, an electrochemical recycling system would use electrons as a convenient source of energy. We report a method that uses electricity to turn over enzymes for ATP generation in a simplified cellular respiration mimic. The method is simple, robust, and scalable, as well as broadly applicable to complex enzymatic processes including a four-enzyme biocatalytic cascade in the synthesis of the antiviral molnupiravir.
Asunto(s)
Adenosina Trifosfato , Adenosina Trifosfato/química , BiocatálisisRESUMEN
The electrochemical nitrate reduction reaction (NO3RR) on titanium introduces significant surface reconstruction and forms titanium hydride (TiHx, 0 < x ≤ 2). With ex situ grazing-incidence X-ray diffraction (GIXRD) and X-ray absorption spectroscopy (XAS), we demonstrated near-surface TiH2 enrichment with increasing NO3RR applied potential and duration. This quantitative relationship facilitated electrochemical treatment of Ti to form TiH2/Ti electrodes for use in NO3RR, thereby decoupling hydride formation from NO3RR performance. A wide range of NO3RR activity and selectivity on TiH2/Ti electrodes between -0.4 and -1.0 VRHE was observed and analyzed with density functional theory (DFT) calculations on TiH2(111). This work underscores the importance of relating NO3RR performance with near-surface electrode structure to advance catalyst design and operation.
Asunto(s)
Nitratos , Titanio , Electrodos , Nitratos/química , Oxidación-Reducción , Titanio/química , Rayos XRESUMEN
Flower-like polyacrylonitrile (PAN) particles have shown promising performance for numerous applications, including sensors, catalysis, and energy storage. However, the detailed formation process of these unique structures during polymerization has not been investigated. Here, we elucidate the formation process of flower-like PAN particles through a series of in situ and ex situ experiments. We have the following key findings. First, lamellar petals within the flower-like particles were predominantly orthorhombic PAN crystals. Second, branching of the lamellae during the particle formation arose from PAN's fast nucleation and growth on pre-existing PAN crystals, which was driven by the poor solubility of PAN in the reaction solvent. Third, the particles were formed to maintain a constant center-to-center distance during the reaction. The separation distance was attributed to strong electrostatic repulsion, which resulted in the final particles' spherical shape and uniform size. Lastly, we employed the understanding of the formation mechanism to tune the PAN particles' morphology using several experimental parameters including incorporating comonomers, changing temperature, adding nucleation seeds, and adjusting the monomer concentration. These findings provide important insights into the bottom-up design of advanced nanostructured PAN-based materials and controlled polymer nanostructure self-assemblies.
Asunto(s)
Resinas Acrílicas , Polímeros , Tamaño de la Partícula , Polímeros/química , SolventesRESUMEN
γ-Graphyne is the most symmetric sp2/sp1 allotrope of carbon, which can be viewed as graphene uniformly expanded through the insertion of two-carbon acetylenic units between all the aromatic rings. To date, synthesis of bulk γ-graphyne has remained a challenge. We here report the synthesis of multilayer γ-graphyne through crystallization-assisted irreversible cross-coupling polymerization. A comprehensive characterization of this new carbon phase is described, including synchrotron powder X-ray diffraction, electron diffraction, lateral force microscopy, Raman spectroscopy, infrared spectroscopy, and cyclic voltammetry. Experiments indicate that γ-graphyne is a 0.48 eV band gap semiconductor, with a hexagonal a-axis spacing of 6.88 Å and an interlayer spacing of 3.48 Å, which is consistent with theoretical predictions. The observed crystal structure has an aperiodic sheet stacking. The material is thermally stable up to 240 °C but undergoes transformation at higher temperatures. While conventional 2D polymerization and reticular chemistry rely on error correction through reversibility, we demonstrate that a periodic covalent lattice can be synthesized under purely kinetic control. The reported methodology is scalable and inspires extension to other allotropes of the graphyne family.
RESUMEN
The resurgence of interest in a hydrogen economy and the development of hydrogen-related technologies has initiated numerous research and development efforts aimed at making the generation, storage, and transportation of hydrogen more efficient and affordable. Solar thermochemical hydrogen production (STCH) is a process that potentially exhibits numerous benefits such as high reaction efficiencies, tunable thermodynamics, and continued performance over extended cycling. Although CeO2 has been the de facto standard STCH material for many years, more recently 12R-Ba4CeMn3O12 (BCM) has demonstrated enhanced hydrogen production at intermediate H2/H2O conditions compared to CeO2, making it a contender for large-scale hydrogen production. However, the thermo-reduction stability of 12R-BCM dictates the oxygen partial pressure (pO2) and temperature conditions optimal for cycling. In this study, we identify the formation of a 6H-BCM polytype at high temperature and reducing conditions, experimentally and computationally, as a mechanism and pathway for 12R-BCM decomposition. 12R-BCM was synthesized with high purity and then controllably reduced using thermogravimetric analysis (TGA). Synchrotron X-ray diffraction (XRD) data is used to identify the formation of a 6H-Ba3Ce0.75Mn2.25O9 (6H-BCM) polytype that is formed at 1350 °C under strongly reducing pO2. Density functional theory (DFT) total energy and defect calculations show a window of thermodynamic stability for the 6H-polytype consistent with the XRD results. These data provide the first evidence of the 6H-BCM polytype and could provide a mechanistic explanation for the superior water-splitting behaviors of 12R-BCM.
RESUMEN
Electrochemical reduction of CO2 to useful chemicals has been actively pursued for closing the carbon cycle and preventing further deterioration of the environment/climate. Since CO2 reduction reaction (CO2RR) at a cathode is always paired with the oxygen evolution reaction (OER) at an anode, the overall efficiency of electrical energy to chemical fuel conversion must consider the large energy barrier and sluggish kinetics of OER, especially in widely used electrolytes, such as the pH-neutral CO2-saturated 0.5 M KHCO3 OER in such electrolytes mostly relies on noble metal (Ir- and Ru-based) electrocatalysts in the anode. Here, we discover that by anodizing a metallic Ni-Fe composite foam under a harsh condition (in a low-concentration 0.1 M KHCO3 solution at 85 °C under a high-current â¼250 mA/cm2), OER on the NiFe foam is accompanied by anodic etching, and the surface layer evolves into a nickel-iron hydroxide carbonate (NiFe-HC) material composed of porous, poorly crystalline flakes of flower-like NiFe layer-double hydroxide (LDH) intercalated with carbonate anions. The resulting NiFe-HC electrode in CO2-saturated 0.5 M KHCO3 exhibited OER activity superior to IrO2, with an overpotential of 450 and 590 mV to reach 10 and 250 mA/cm2, respectively, and high stability for >120 h without decay. We paired NiFe-HC with a CO2RR catalyst of cobalt phthalocyanine/carbon nanotube (CoPc/CNT) in a CO2 electrolyzer, achieving selective cathodic conversion of CO2 to CO with >97% Faradaic efficiency and simultaneous anodic water oxidation to O2 The device showed a low cell voltage of 2.13 V and high electricity-to-chemical fuel efficiency of 59% at a current density of 10 mA/cm2.
RESUMEN
Reversible high-voltage redox chemistry is an essential component of many electrochemical technologies, from (electro)catalysts to lithium-ion batteries. Oxygen-anion redox has garnered intense interest for such applications, particularly lithium-ion batteries, as it offers substantial redox capacity at more than 4 V versus Li/Li+ in a variety of oxide materials. However, oxidation of oxygen is almost universally correlated with irreversible local structural transformations, voltage hysteresis and voltage fade, which currently preclude its widespread use. By comprehensively studying the Li2-xIr1-ySnyO3 model system, which exhibits tunable oxidation state and structural evolution with y upon cycling, we reveal that this structure-redox coupling arises from the local stabilization of short approximately 1.8 Å metal-oxygen π bonds and approximately 1.4 Å O-O dimers during oxygen redox, which occurs in Li2-xIr1-ySnyO3 through ligand-to-metal charge transfer. Crucially, formation of these oxidized oxygen species necessitates the decoordination of oxygen to a single covalent bonding partner through formation of vacancies at neighbouring cation sites, driving cation disorder. These insights establish a point-defect explanation for why anion redox often occurs alongside local structural disordering and voltage hysteresis during cycling. Our findings offer an explanation for the unique electrochemical properties of lithium-rich layered oxides, with implications generally for the design of materials employing oxygen redox chemistry.
RESUMEN
Hybrid perovskites are a promising class of materials for a range of optoelectronic applications. Many material properties are dictated by the details of the synthetic process, yet a mechanistic understanding is lacking for the majority of these materials. We have studied the formation of methylammonium lead iodide films derived from a lead chloride precursor to understand both the casting solution chemistry and its influence on the final, largely chlorine-free, film. Using solution-phase extended X-ray absorption spectroscopy, we observe a halide exchange with the primary solution plumbate species identified as PbI2.5Cl0.33. The mixed halide plumbate solution species leads to formation of the crystalline intermediate phase of (CH3NH3)2PbI3Cl. Using in situ synchrotron X-ray diffraction, we show that compositional control of the casting solution can control the annealing kinetics of film formation. Our study demonstrates the importance of solution-phase chemistry and its impact on lead halide perovskite synthesis.
RESUMEN
The Gene Expression Database (GXD; www.informatics.jax.org/expression.shtml) is an extensive and well-curated community resource of mouse developmental expression information. Through curation of the scientific literature and by collaborations with large-scale expression projects, GXD collects and integrates data from RNA in situ hybridization, immunohistochemistry, RT-PCR, northern blot and western blot experiments. Expression data from both wild-type and mutant mice are included. The expression data are combined with genetic and phenotypic data in Mouse Genome Informatics (MGI) and made readily accessible to many types of database searches. At present, GXD includes over 1.5 million expression results and more than 300 000 images, all annotated with detailed and standardized metadata. Since our last report in 2014, we have added a large amount of data, we have enhanced data and database infrastructure, and we have implemented many new search and display features. Interface enhancements include: a new Mouse Developmental Anatomy Browser; interactive tissue-by-developmental stage and tissue-by-gene matrix views; capabilities to filter and sort expression data summaries; a batch search utility; gene-based expression overviews; and links to expression data from other species.
Asunto(s)
Biología Computacional/métodos , Bases de Datos Genéticas , Perfilación de la Expresión Génica/métodos , Expresión Génica , Genómica/métodos , Animales , Ontología de Genes , Ratones , Especificidad de Órganos , Motor de Búsqueda , Interfaz Usuario-Computador , Navegador WebRESUMEN
PURPOSE: We investigated the prevalence of and variables associated with parastomal hernia and its outcomes after robot-assisted radical cystectomy and ileal conduit creation for bladder cancer. MATERIALS AND METHODS: We retrospectively reviewed the records of patients who underwent robot-assisted radical cystectomy at our institution. Parastomal hernia was defined as the protrusion of abdominal contents through the stomal defect in the abdominal wall on cross-sectional imaging. Parastomal hernia was further described in terms of patient and hernia characteristics, symptoms, management and outcomes. The Kaplan-Meier method was used to determine time to parastomal hernia and time to surgery. Multivariate stepwise logistic regression was done to evaluate variables associated with parastomal hernia. RESULTS: A total of 383 patients underwent robot-assisted radical cystectomy and ileal conduit creation. Of the patients 75 (20%) had parastomal hernia, which was symptomatic in 23 (31%), and 11 (15%) underwent treatment. Median time to parastomal hernia was 13 months (IQR 9-22). Parastomal hernia developed in 9%, 23% and 32% of cases at 1, 2 and 3 years, respectively. Patients with parastomal hernia had a significantly higher body mass index (30 vs 28 kg/m2, p = 0.02), longer overall operative time (357 vs 340 minutes, p = 0.01) and greater blood loss (325 vs 250 ml, p = 0.04). On multivariate analysis operative time (OR 1.25, 95% CI 1.21-3.90, p <0.001), a fascial defect 30 mm or greater (OR 5.23, 95% CI 2.32-11.8, p <0.001) and a lower postoperative estimated glomerular filtration rate (OR 2.17, 95% CI 1.21-3.90, p = 0.01) were significantly associated with parastomal hernia. CONCLUSIONS: Symptoms develop in approximately a third of patients with parastomal hernia and 15% will require surgery. The risk of parastomal hernia plateaued after postoperative year 3. Longer operative time, a larger fascial defect and lower postoperative kidney function were associated with parastomal hernia.
Asunto(s)
Cistectomía/efectos adversos , Hernia Ventral/etiología , Complicaciones Posoperatorias/etiología , Robótica , Neoplasias de la Vejiga Urinaria/cirugía , Derivación Urinaria/efectos adversos , Anciano , Cistectomía/métodos , Femenino , Estudios de Seguimiento , Hernia Ventral/epidemiología , Humanos , Masculino , Persona de Mediana Edad , Complicaciones Posoperatorias/epidemiología , Prevalencia , Estudios Retrospectivos , Factores de Riesgo , Factores de Tiempo , Estados Unidos/epidemiologíaRESUMEN
The C-shaped meniscus cartilages normally insert into bone around the tibial spines of the knee. As the knee joint rotates and flexes, circumferential hoop stresses are generated within the tissue, resisted by the collagen fibers that define both the insertion points and the ultrastructure of the meniscus tissue itself. For a transplanted meniscus to work normally, the biomechanical interface of the collagen fibers to the bone must be recreated.
Asunto(s)
Articulación de la Rodilla , Meniscos Tibiales/cirugía , Aloinjertos , Análisis por Apareamiento , Técnicas de SuturaRESUMEN
Perpendicular magnetic anisotropy (PMA) plays a critical role in the development of spintronics, thereby demanding new strategies to control PMA. Here we demonstrate a conceptually new type of interface induced PMA that is controlled by oxygen octahedral rotation. In superlattices comprised of La_{1-x}Sr_{x}MnO_{3} and SrIrO_{3}, we find that all superlattices (0≤x≤1) exhibit ferromagnetism despite the fact that La_{1-x}Sr_{x}MnO_{3} is antiferromagnetic for x>0.5. PMA as high as 4×10^{6} erg/cm^{3} is observed by increasing x and attributed to a decrease of oxygen octahedral rotation at interfaces. We also demonstrate that oxygen octahedral deformation cannot explain the trend in PMA. These results reveal a new degree of freedom to control PMA, enabling discovery of emergent magnetic textures and topological phenomena.
RESUMEN
PURPOSE: The purpose of this study is to evaluate the clinical outcomes of the articular cartilage paste graft procedure at a minimum of 10 years from surgery. It is hypothesized that articular cartilage paste grafting can provide patients with a durable repair of severe full-thickness osteochondral injuries, measured by persistence of procedure-induced benefit and subjective outcome scores at 10 or more years. METHODS: Seventy-four patients undergoing paste grafting at a mean age of 45.3 ± 10.8 years (range 13-69 years) were followed up at a mean of 16.8 ± 2.4 years (range 10.6-23.2 years) post-operatively using validated subjective outcome measures; Kaplan-Meier survival analysis was performed to estimate expected population benefit time. RESULTS: Kaplan-Meier estimated median benefit time of 19.1 years (mean: 16.6 ± 0.9 years) for all patients undergoing paste grafting. Thirty-one (41.9 %) patients had progressed to arthroplasty at a mean of 9.8 ± 5.6 years (range 0.4-20.6 years). Ninety percent of patients reported that the procedure provided good to excellent pain relief. Median IKDC subjective score increased significantly at most recent follow-up (70.1) compared to preoperative (55.7, p = 0.013). Median WOMAC scores decreased significantly from 26 to 14 (p = 0.001). Median Tegner score increase from 4 to 6 was not found to be significant (ns). VAS pain averaged 23/100 at most recent follow-up. CONCLUSIONS: Patients who underwent the paste grafting reported improved pain, function, and activity levels for an expected mean of 16.6 years, and for those who ultimately progressed to knee replacement, surgical treatment including the paste graft was able to delay arthroplasty until a mean age of 60.2 years, an age at which the procedure is commonly performed. Full-thickness articular cartilage loss can be successfully treated, reducing pain, and improving function, using this single-step, inexpensive arthroscopic procedure. LEVEL OF EVIDENCE: IV.
Asunto(s)
Artroscopía , Cartílago Articular/cirugía , Articulación de la Rodilla/cirugía , Trasplantes , Resultado del Tratamiento , Adolescente , Adulto , Anciano , Cartílago/trasplante , Femenino , Estudios de Seguimiento , Humanos , Fracturas Intraarticulares/patología , Masculino , Persona de Mediana Edad , Osteoartritis/cirugía , Manejo del Dolor , Dimensión del Dolor , Periodo Posoperatorio , Trasplante Autólogo , Adulto JovenRESUMEN
Surface sensitive X-ray reflectivity (XRR) measurements were performed to investigate the electrochemical lithiation of a native oxide terminated single crystalline silicon (100) electrode in real time during the first galvanostatic discharge cycle. This allows us to gain nanoscale, mechanistic insight into the lithiation of Si and the formation of the solid electrolyte interphase (SEI). We describe an electrochemistry cell specifically designed for in situ XRR studies and have determined the evolution of the electron density profile of the lithiated Si layer (LixSi) and the SEI layer with subnanometer resolution. We propose a three-stage lithiation mechanism with a reaction limited, layer-by-layer lithiation of the Si at the LixSi/Si interface.
RESUMEN
Typical X-ray diffraction measurements are made by moving a detector to discrete positions in space and then measuring the signal at each stationary position. This step-scanning method can be time-consuming, and may induce vibrations in the measurement system when the motors are accelerated and decelerated at each position. Furthermore, diffraction information between the data points may be missed unless a fine step-scanning is used, which further increases the total measurement time. To utilize beam time efficiently, the motor acceleration and deceleration time should be minimized, and the signal-to-noise ratio should be maximized. To accomplish this, an integrated continuous-scan system was developed at the Stanford Synchrotron Radiation Lightsource (SSRL). The continuous-scan system uses an in-house integrated motor controller system and counter/timer electronics. SPEC software is used to control both the hardware and data acquisition systems. The time efficiency and repeatability of the continuous-scan system were tested using X-ray diffraction from a ZnO powder and compared with the step-scan technique. Advantages and limitations of the continuous-scan system and a demonstration of variable-velocity continuous scan are discussed.
RESUMEN
The crystal structures of NiX2(pyz)2 (X = Cl (1), Br (2), I (3), and NCS (4)) were determined by synchrotron X-ray powder diffraction. All four compounds consist of two-dimensional (2D) square arrays self-assembled from octahedral NiN4X2 units that are bridged by pyz ligands. The 2D layered motifs displayed by 1-4 are relevant to bifluoride-bridged [Ni(HF2)(pyz)2]EF6 (E = P, Sb), which also possess the same 2D layers. In contrast, terminal X ligands occupy axial positions in 1-4 and cause a staggered packing of adjacent layers. Long-range antiferromagnetic (AFM) order occurs below 1.5 (Cl), 1.9 (Br and NCS), and 2.5 K (I) as determined by heat capacity and muon-spin relaxation. The single-ion anisotropy and g factor of 2, 3, and 4 were measured by electron-spin resonance with no evidence for zero-field splitting (ZFS) being observed. The magnetism of 1-4 spans the spectrum from quasi-two-dimensional (2D) to three-dimensional (3D) antiferromagnetism. Nearly identical results and thermodynamic features were obtained for 2 and 4 as shown by pulsed-field magnetization, magnetic susceptibility, as well as their Néel temperatures. Magnetization curves for 2 and 4 calculated by quantum Monte Carlo simulation also show excellent agreement with the pulsed-field data. Compound 3 is characterized as a 3D AFM with the interlayer interaction (Jâ¥) being slightly stronger than the intralayer interaction along Ni-pyz-Ni segments (J(pyz)) within the two-dimensional [Ni(pyz)2](2+) square planes. Regardless of X, J(pyz) is similar for the four compounds and is roughly 1 K.
RESUMEN
The Gene Expression Database (GXD; http://www.informatics.jax.org/expression.shtml) is an extensive and well-curated community resource of mouse developmental expression information. GXD collects different types of expression data from studies of wild-type and mutant mice, covering all developmental stages and including data from RNA in situ hybridization, immunohistochemistry, RT-PCR, northern blot and western blot experiments. The data are acquired from the scientific literature and from researchers, including groups doing large-scale expression studies. Integration with the other data in Mouse Genome Informatics (MGI) and interconnections with other databases places GXD's gene expression information in the larger biological and biomedical context. Since the last report, the utility of GXD has been greatly enhanced by the addition of new data and by the implementation of more powerful and versatile search and display features. Web interface enhancements include the capability to search for expression data for genes associated with specific phenotypes and/or human diseases; new, more interactive data summaries; easy downloading of data; direct searches of expression images via associated metadata; and new displays that combine image data and their associated annotations. At present, GXD includes >1.4 million expression results and 250,000 images that are accessible to our search tools.