RESUMEN
In this study, we demonstrate that graphene grown on Ge does not contain any copper contamination, and identify some of the errors affecting the accuracy of commonly used measurement methods. Indeed, one of these, the secondary ion mass spectrometry (SIMS) technique, reveals copper contamination in Ge-based graphene but does not take into account the effect of the presence of the graphene layer. We have shown that this layer increases negative ionization significantly, and thus yields false results, but also that the graphene enhances, by an order of two, the magnitude of the intensity of SIMS signals when compared with a similar graphene-free sample, enabling much better detection limits. This forms the basis of a new measurement procedure, graphene enhanced SIMS (GESIMS) (pending European patent application no. EP 16461554.4), which allows for the precise estimation of the realistic distribution of dopants and contamination in graphene. In addition, we present evidence that the GESIMS effect leads to unexpected mass interferences with double-ionized species, and that these interferences are negligible in samples without graphene. The GESIMS method also shows that graphene transferred from Cu results in increased copper contamination.
RESUMEN
We present a novel measurement approach which combines the electrical characterization of solution-gated field-effect transistors based on epitaxial bilayer graphene on 4H-SiC (0001) with simultaneous Raman spectroscopy. By changing the gate voltage, we observed Raman signatures related to the resonant electron-phonon coupling. An analysis of these Raman bands enabled the extraction of the geometrical capacitance of the system and an accurate calculation of the Fermi levels for bilayer graphene. An intentional application of higher gate voltages allowed us to trigger electrochemical reactions, which we followed in situ by Raman spectroscopy. The reactions showed a partially reversible character, as indicated by an emergence/disappearance of peaks assigned to C-H and Si-H vibration modes as well as an increase/decrease of the defect-related Raman D band intensity. Our setup provides a highly interesting platform for future spectroelectrochemical research on electrically-induced sorption processes of graphene on the micrometer scale.
RESUMEN
We demonstrate the growth of high quality graphene layers by chemical vapor deposition (CVD) on insulating and conductive SiC substrates. This method provides key advantages over the well-developed epitaxial graphene growth by Si sublimation that has been known for decades. (1) CVD growth is much less sensitive to SiC surface defects resulting in high electron mobilities of â¼1800 cm(2)/(V s) and enables the controlled synthesis of a determined number of graphene layers with a defined doping level. The high quality of graphene is evidenced by a unique combination of angle-resolved photoemission spectroscopy, Raman spectroscopy, transport measurements, scanning tunneling microscopy and ellipsometry. Our measurements indicate that CVD grown graphene is under less compressive strain than its epitaxial counterpart and confirms the existence of an electronic energy band gap. These features are essential for future applications of graphene electronics based on wafer scale graphene growth.
Asunto(s)
Compuestos Inorgánicos de Carbono/química , Cristalización/métodos , Grafito/química , Nanoestructuras/química , Nanoestructuras/ultraestructura , Compuestos de Silicona/química , Gases/química , Sustancias Macromoleculares/química , Ensayo de Materiales , Conformación Molecular , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
The energy dependence of the electronic scattering time is probed by Landau level spectroscopy in quasineutral multilayer epitaxial graphene. From the broadening of overlapping Landau levels we find that the scattering rate 1/τ increases linearly with energy ϵ. This implies a surprising property of the Landau level spectrum in graphene-the number of resolved Landau levels remains constant with the applied magnetic field. Insights are given about possible scattering mechanisms and carrier mobilities in the graphene system investigated.
RESUMEN
Tissue engineering allows to combine biomaterials and seeded cells to experimentally replace urinary bladder wall. The normal bladder wall however, includes branched neuronal network propagating signals which regulate urine storage and voiding. In this study we introduced a novel biocomposite built from amniotic membrane (Am) and graphene which created interface between cells and external stimuli replacing neuronal network. Graphene layers were transferred without modifying Am surface. Applied method allowed to preserve the unique bioactive characteristic of Am. Tissue engineered constructs composed from biocomposite seeded with smooth muscle cells (SMC) derived from porcine detrusor and porcine urothelial cells (UC) were used to evaluate properties of developed biomaterial. The presence of graphene layer significantly increased electrical conductivity of biocomposite. UCs and SMCs showed an organized growth pattern on graphene covered surfaces. Electrical filed stimulation (EFS) applied in vitro led additionally to increased SMCs growth and linear arrangement. 3D printed chamber equipped with 3D printed graphene based electrodes was fabricated to deliver EFS and record pressure changes caused by contracting SMCs seeded biocomposite. Observed contractile response indicated on effective SMCs stimulation mediated by graphene layer which constituted efficient cell to biomaterial interface.
Asunto(s)
Amnios/citología , Materiales Biocompatibles/administración & dosificación , Grafito/administración & dosificación , Reimplantación/métodos , Ingeniería de Tejidos/métodos , Vejiga Urinaria/efectos de los fármacos , Vejiga Urinaria/fisiología , Animales , Proliferación Celular/efectos de los fármacos , Conductividad Eléctrica/uso terapéutico , Masculino , Contracción Muscular/efectos de los fármacos , Miocitos del Músculo Liso/efectos de los fármacos , Porcinos , Andamios del Tejido , Urotelio/efectos de los fármacosRESUMEN
The effects of humidity on the electronic properties of quasi-free standing one layer graphene (QFS 1LG) are investigated via simultaneous magneto-transport in the van der Pauw geometry and local work function measurements in a controlled environment. QFS 1LG on 4H-SiC(0001) is obtained by hydrogen intercalation of the interfacial layer. In this system, the carrier concentration experiences a two-fold increase in sensitivity to changes in relative humidity as compared to the as-grown epitaxial graphene. This enhanced sensitivity to water is attributed to the lowering of the hydrophobicity of QFS 1LG, which results from spontaneous polarization of 4H-SiC(0001) strongly influencing the graphene. Moreover, the superior carrier mobility of the QFS 1LG system is retained even at the highest humidity. The work function maps constructed from Kelvin probe force microscopy also revealed higher sensitivity to water for 1LG compared to 2LG in both QFS 1LG and as-grown systems. These results point to a new field of applications for QFS 1LG, i.e., as humidity sensors, and the corresponding need for metrology in calibration of graphene-based sensors and devices.
RESUMEN
Graphene grown by a sublimation technique was studied by Scanning Electron Microscopy (SEM) and micro-Raman spectroscopy. The measurement area of a sample was marked and investigated using both systems, as a result of which SEM images were directly compared with Raman maps. In this work we show that a correlative analysis of Energy Selective Backscattered electrons detector (EsB), In-Lens figures and Raman maps of shape and intensity of the 2D band is adequate to determine graphene layer thickness with the precision of SEM and reliability of Raman spectroscopy.
Asunto(s)
Grafito/análisis , Microscopía Electrónica de Rastreo/métodos , Nanoestructuras/química , Nanoestructuras/ultraestructura , Espectrometría Raman/métodosRESUMEN
Various experimental data revealing large-area high-quality graphene films grown by the CVD method on Ge(001)/Si(001) substrates are presented. SEM images have shown that the structure of nano-facets is formed on the entire surface of Ge(001), which is covered by a graphene layer over the whole macroscopic sample surface of 1 cm(2). The hill-and-valley structures are positioned 90° to each other and run along the <100> direction. The hill height in relation to the valley measured by STM is about 10 nm. Raman measurements have shown that a uniform graphene monolayer covers the nano-facet structures on the Ge(001) surface. Raman spectroscopy has also proved that the grown graphene monolayer is characterized by small strain variations and minimal charge fluctuations. Atomically resolved STM images on the hills of the nanostructures on the Ge(001) surface have confirmed the presence of a graphene monolayer. In addition, the STS/CITS maps show that high-quality graphene has been obtained on such terraces. The subsequent coalescence of graphene domains has led to a relatively well-oriented large-area layer. This is confirmed by LEED measurements, which have indicated that two orientations are preferable in the grown large-area graphene monolayer. The presence of large-area coverage by graphene has been also confirmed by low temperature Hall measurements of a macroscopic sample, showing an n-type concentration of 9.3 × 10(12) cm(-2) and a mobility of 2500 cm(2) V(-1) s(-1). These important characteristic features of graphene indicate a high homogeneity of the layer grown on the large area Ge(001)/Si(001) substrates.