RESUMEN
Defining analysis parameter space for reliable composition measurement of materials is of significance for atom probe tomography applications. This research carefully explores the influence of specimen temperature and ultraviolet laser energy on measured compositions of precipitates and the matrix in an Al-Mg-Si-Cu alloy with atom probe tomography using voltage pulsing and laser pulsing. Low specimen temperature and high laser energy are beneficial to reduce background noise and improve mass resolution. Under both voltage pulsing and laser pulsing, the detected compositions and Mg/Si ratios of precipitates are highly sensitive to specimen temperature in the range of 20 - 80 K. In contrast, at a fixed temperature of 20 K, laser energy variation from 40 to 80 pJ provides consistent measurements in composition and Mg/Si ratio of precipitates. Related field-induced preferential evaporation and surface migration of certain elements have been discussed.
RESUMEN
The stoichiometry of titanium carbide (TiCx) particles is important in determining particle properties. Spherical TiCx powders with particle sizes of 1-5 µm were produced by self-propagating high-temperature synthesis (SHS) in 30 wt.% Al-, 30 wt.% Cu-, and 30 wt.% Fe-Ti-C systems, respectively. To measure the compositions of the carbide powders, atom probe tomography (APT) tip specimens were carefully prepared by using a focus ion-beam milling method. APT analysis revealed that the TiCx particles formed in Al-, Cu-, and Fe-Ti-C systems are highly substoichiometric. The results are consistent with observations of the TiCx particles with a high content of oxygen and a certain amount of secondary metallic elements (Al, Cu, and Fe).