Targeted outdoor residual spraying, autodissemination devices and their combination against Aedes mosquitoes: field implementation in a Malaysian urban setting.

Currently, dengue control relies largely on reactive vector control programmes. Proactive vector-control using a rational, well-balanced integrated vector management approach may prove more successful for dengue control. As part of the development of a cluster randomized controlled epidemiological trial, a study was conducted in Johor Bahru, Malaysia. The study included one control site (three buildings) and three intervention sites which were treated as follows: targeted outdoor residual spraying only (TORS site, two buildings); deployment of autodissemination devices only (ADD site, four buildings); and the previous two treatments combined (TORS + ADD site, three buildings). The primary entomological measurement was per cent of positive ovitraps-ovitrap index (OI). The effect of each intervention on OI was analyzed by a modified ordinary least squares regression model. Relative to the control site, the TORS and ADD sites showed a reduction in the Aedes OI (-6.5%, P = 0.04 and -8.3%, P = 0.10, respectively). Analysis by species showed that, relative to control, the Ae. aegypti OI was lower in ADD (-8.9%, P = 0.03) and in TORS (-10.4%, P = 0.02). No such effect was evident in the TORS + ADD site. The present study provides insights into the methods to be used for the main trial. The combination of multiple insecticides with different modes of action in one package is innovative, although we could not demonstrate the additive effect of TORS + ADD. Further work is required to strengthen our understanding of how these interventions impact dengue vector populations and dengue transmission.

Electrostatic coating enhances bioavailability of insecticides and breaks pyrethroid resistance in mosquitoes.

Insecticide resistance poses a significant and increasing threat to the control of malaria and other mosquito-borne diseases. We present a novel method of insecticide application based on netting treated with an electrostatic coating that binds insecticidal particles through polarity. Electrostatic netting can hold small amounts of insecticides effectively and results in enhanced bioavailability upon contact by the insect. Six pyrethroid-resistant Anopheles mosquito strains from across Africa were exposed to similar concentrations of deltamethrin on electrostatic netting or a standard long-lasting deltamethrin-coated bednet (PermaNet 2.0). Standard WHO exposure bioassays showed that electrostatic netting induced significantly higher mortality rates than the PermaNet, thereby effectively breaking mosquito resistance. Electrostatic netting also induced high mortality in resistant mosquito strains when a 15-fold lower dose of deltamethrin was applied and when the exposure time was reduced to only 5 s. Because different types of particles adhere to electrostatic netting, it is also possible to apply nonpyrethroid insecticides. Three insecticide classes were effective against strains of Aedes and Culex mosquitoes, demonstrating that electrostatic netting can be used to deploy a wide range of active insecticides against all major groups of disease-transmitting mosquitoes. Promising applications include the use of electrostatic coating on walls or eave curtains and in trapping/contamination devices. We conclude that application of electrostatically adhered particles boosts the efficacy of WHO-recommended insecticides even against resistant mosquitoes. This innovative technique has potential to support the use of unconventional insecticide classes or combinations thereof, potentially offering a significant step forward in managing insecticide resistance in vector-control operations.

Eave tubes for malaria control in Africa: an introduction.

In spite of massive progress in the control of African malaria since the turn of the century, there is a clear and recognized need for additional tools beyond long-lasting insecticide-treated bed nets (LLINs) and indoor residual spraying (IRS) of insecticides, to progress towards elimination. Moreover, widespread and intensifying insecticide resistance requires alternative control agents and delivery systems to enable development of effective insecticide resistance management strategies. This series of articles presents a novel concept for malaria vector control, the 'eave tube', which may fulfil these important criteria. From its conceptualization to laboratory and semi-field testing, to demonstration of potential for implementation, the stepwise development of this new vector control approach is described. These studies suggest eave tubes (which comprise a novel way of delivering insecticides plus screening to make the house more 'mosquito proof') could be a viable, cost-effective, and acceptable control tool for endophilic and endophagic anophelines, and possibly other (nuisance) mosquitoes. The approach could be applicable in a wide variety of housing in sub-Saharan Africa, and possibly beyond, for vectors that use the eave as their primary house entry point. The results presented in these articles were generated during an EU-FP7 funded project, the mosquito contamination device (MCD) project, which ran between 2012 and 2015. This was a collaborative project undertaken by vector biologists, product developers, modellers, materials scientists, and entrepreneurs from five different countries.

Measuring the effectiveness of integrated vector management with targeted outdoor residual spraying and autodissemination devices on the incidence of dengue in urban Malaysia in the iDEM trial (intervention for Dengue Epidemiology in Malaysia): study protocol for a cluster randomized controlled trial.

BACKGROUND: In common with many South East Asian countries, Malaysia is endemic for dengue. Dengue control in Malaysia is currently based on reactive vector management within 24 h of a dengue case being reported. Preventive rather than reactive vector control approaches, with combined interventions, are expected to improve the cost-effectiveness of dengue control programs. The principal objective of this cluster randomized controlled trial is to quantify the effectiveness of a preventive integrated vector management (IVM) strategy on the incidence of dengue as compared to routine vector control efforts. METHODS: The trial is conducted in randomly allocated clusters of low- and medium-cost housing located in the Federal Territory of Kuala Lumpur and Putrajaya. The IVM approach combines: targeted outdoor residual spraying with K-Othrine Polyzone, deployment of mosquito traps as auto-dissemination devices, and community engagement activities. The trial includes 300 clusters randomly allocated in a 1:1 ratio. The clusters receive either the preventive IVM in addition to the routine vector control activities or the routine vector control activities only. Epidemiological data from monthly confirmed dengue cases during the study period will be obtained from the Vector Borne Disease Sector, Malaysian Ministry of Health e-Dengue surveillance system. Entomological surveillance data will be collected in 12 clusters randomly selected from each arm. To measure the effectiveness of the IVM approach on dengue incidence, a negative binomial regression model will be used to compare the incidence between control and intervention clusters. To quantify the effect of the interventions on the main entomological outcome, ovitrap index, a modified ordinary least squares regression model using a robust standard error estimator will be used. DISCUSSION: Considering the ongoing expansion of dengue burden in Malaysia, setting up proactive control strategies is critical. Despite some limitations of the trial such as the use of passive surveillance to identify cases, the results will be informative for a better understanding of effectiveness of proactive IVM approach in the control of dengue. Evidence from this trial may help justify investment in preventive IVM approaches as preferred to reactive case management strategies. TRIAL REGISTRATION: ISRCTN ISRCTN81915073 . Retrospectively registered on 17 April 2020.

Serotonin transporter dosage modulates long-term decision-making in rat and human.

Decision-making plays an important role in everyday life and is often disturbed in psychiatric conditions affected by the common human serotonin transporter promoter length polymorphism (5-HTTLPR). This raises the hypothesis that decision-making is modulated by the serotonergic system, but currently it is unclear how the 5-HTTLPR affects central serotonergic functioning. We tested healthy human volunteers genotyped for the 5-HTTLPR in the Iowa Gambling Task (IGT), which is one of the most frequently used neuropsychological tasks to assess decision-making. Furthermore, we tested female homozygous (SERT(-/-)) and heterozygous (SERT(+/-)) serotonin transporter knockout rats in a rodent version of the IGT. Women homozygous for the short (s) allele of the 5-HTTLPR were found to choose more disadvantageously than women homozygous for the long allele of the 5-HTTLPR as the IGT progressed. In the rat, SERT(-/-) and SERT(+/-) were associated with advantageous decision-making compared to SERT(+/+) as the IGT progressed. Combining the human and rat observations, we show that SERT dosage affects the maintenance of a once established choice option, irrespective of the choice (advantageous or disadvantageous) that has been made. We postulate that the SERT-mediated effects relate to deficits in the processing of choice outcome to guide subsequent choices in this gamble-based test, and that SERT(-/-) and SERT(+/-) rodent models in combination with studies in humans can be used to provide insight in the modulatory effects of 5-HTTLPR.

Development and evaluation of a novel contamination device that targets multiple life-stages of Aedes aegypti.

BACKGROUND: The increasing global threat of Dengue demands new and easily applicable vector control methods. Ovitraps provide a low-tech and inexpensive means to combat Dengue vectors. Here we describe the development and optimization process of a novel contamination device that targets multiple life-stages of the Aedes aegypti mosquito. Special focus is directed to the diverse array of control agents deployed in this trap, covering adulticidal, larvicidal and autodissemination impacts. METHODS: Different trap prototypes and their parts are described, including a floater to contaminate alighting gravid mosquitoes. The attractiveness of the trap, different odor lures and floater design were studied using fluorescent powder adhering to mosquito legs and via choice tests. We demonstrate the mosquitocidal impacts of the control agents: a combination of the larvicide pyriproxyfen and the adulticidal fungus Beauveria bassiana. The impact of pyriproxyfen was determined in free-flight dissemination experiments. The effect on larval development inside the trap and in surrounding breeding sites was measured, as well as survival impacts on recaptured adults. RESULTS: The developmental process resulted in a design that consists of a black 3 Liter water-filled container with a ring-shaped floater supporting vertically placed gauze dusted with the control agents. On average, 90% of the mosquitoes in the fluorescence experiments made contact with the gauze on the floater. Studies on attractants indicated that a yeast-containing tablet was the most attractive odor lure. Furthermore, the fungus Beauveria bassiana was able to significantly increase mortality of the free-flying adults compared to controls. Dissemination of pyriproxyfen led to >90% larval mortality in alternative breeding sites and 100% larval mortality in the trap itself, against a control mortality of around 5%. CONCLUSION: This ovitrap is a promising new tool in the battle against Dengue. It has proven to be attractive to Aedes aegypti mosquitoes and effective in contaminating these with Beauveria bassiana. Furthermore, we show that the larvicide pyriproxyfen is successfully disseminated to breeding sites close to the trap. Its low production and operating costs enable large scale deployment in Dengue-affected locations.