Conjugated Microporous Polymer Aerogels Encapsulated within Hydroxyapatite Nanowires Exhibit Good Thermal Insulation and Flame-Retardant Properties.

Aerogels have been widely studied in the field of thermal insulation. Herein, we reported a kind of conjugated micropolymer (CMP) aerogel synthesized by 1,3,5-triethynylbenzene and 2-amino-3,5-dibromopyridine. To enhance the flame-retardant property, we composited hydroxyapatite (HAP) nanowires with a CMP aerogel. Transmission electron microscopy (TEM) analysis revealed that HAP nanowires were encapsulated within nanosized CMP tubes. In addition, the thermal conductivity of HAP2-NCMP aerogel was 0.0251 W m-1 K-1, which possesses good thermal insulation property. In the micro-combustion calorimeter (MCC) test, compared with pure NCMP, the peak heat release rate (pHRR) of HAP2-NCMP decreased from 39.3 to 30.82 W g-1, approximately 21.6% lower. Furthermore, with the increased addition of hydroxyapatite in the HAP-NCMP composite, the pHRR of HAP3-NCMP decreased by about 37.4%. Besides, NCMP possesses good mechanical properties, with a compressive strength of 117.3 kPa at a strain level of 60%. These findings suggest promising application potential for HAP-NCMP in energy-saving and flame-retardant applications.

Multishell Copper Oxide Hollow Spheres Incorporated with Fatty Amines for High Light-To-Thermal Conversion.

Composite phase change materials (PCMs) are of great importance for the storage and conversion of energy. In this study, a multishell metal oxide hollow microsphere (CuOHS) was prepared by the hydrothermal method, and a new composite PCM (CuOHS@PCMs) for energy storage and conversion purposes was developed by effectively absorbing fatty amines [namely, tetradecylamine (TDA), hexadecylamine (HDA), and octadecylamine (ODA)] PCMs into the CuOHS via the abundant micropores located on the surface of the microsphere. The incorporation of uncontaminated phase alteration substances with CuOHS yields superior light absorption and leak prevention traits. The three CuOHS@PCMs, specifically CuOHS@TDA, CuOHS@HDA, and CuOHS@ODA, possess considerable latent heats of 198.8, 192.6, and 196.0 J·g-1, respectively, and exhibit desirable thermal properties even after completing 50 and 100 thermal cycles. Moreover, under illumination, the photothermal conversion efficiencies of the three variations of CuOHS@PCMs were 84.0, 81.4, and 78.0%. This CuOHS@PCMs, which are based on CuOHS, have considerable potential in the fields of photothermal conversion, solar energy harvesting, and storage.

Guar Gum-Based Macroporous Hygroscopic Polymer for Efficient Atmospheric Water Harvesting.

Solar-driven atmospheric water harvesting technology has the advantage of not being limited by geography and has great potential in solving the freshwater crisis. Here, we first propose a purely natural and degradable superhydrophilic composite macroporous hygroscopic material by applying guar gum (GG) to atmospheric water harvesting. The material consists of GG-cellulose nanofibers (CNFs) as a porous substrate material, limiting the hygroscopic factor lithium chloride (LiCl) in its three-dimensional (3D) network structure, and carbon nanotubes (CNTs) play a photothermal conversion role. The composite material has a high light absorption rate of more than 95%, and the macroporous structure (20-60 µm) allows for rapid adsorption/desorption kinetics. At 35 °C and 90% relative humidity (RH), the moisture absorption capacity is as high as 1.94 g/g. Under 100 mW/cm2 irradiation, the absorbed water is almost completely desorbed within 3 h, and the water harvesting performance is stable in 10 cycles. Moreover, liquid water was successfully collected in an actual outdoor experiment. This work demonstrates the great potential of biomass materials in the field of atmospheric water collection and provides more opportunities for various energy and sustainable applications in the future.

Fe3O4/PPy-Coated Superhydrophilic Polymer Porous Foam: A Double Layered Photothermal Material with a Synergistic Light-to-Thermal Conversion Effect toward Desalination.

Solar steam generation has been considered as one of the most promising strategies for production of fresh water using renewable solar energy. Herein, we prepared a polymer porous foam (HPSS) by a facile hydrothermal method. The HPSS presents a superhydrophilic wettability, an interpenetrating macroporous structure, and low thermal conductivity, which can well satisfy the criteria as an ideal candidate for photothermal materials. The HPSS/Fe3O4/PPy (polypyrrole) evaporator, of which a Fe3O4/PPy binary optical system served as a light absorption layer and HPSS was used as a porous substrate, was constructed through in situ growth of Fe3O4 particles followed by interfacial polymerization of PPy on the surface of HPSS. HPSS/Fe3O4/PPy shows an excellent light absorption capacity (92%) and photothermal conversion performance, with the solar energy conversion efficiency reaching up to 94.7% under 1 sun irradiation, which is much higher than that of HPSS/PPy (84.8%) composed of a unitary PPy light absorption layer. Interestingly, the presence of Fe3O4 particles could make directional migration in a magnetic field possible, thus facilitating its recovery as a self-floating solar generator in an open water area. Moreover, the HPSS/Fe3O4/PPy evaporator displays outstanding salt resistance properties and stability in various saline solutions, thus having great potential in practical desalination.

Superwetting Electrospun PDMS/PMMA Membrane for PM2.5 Capture and Microdroplet Transfer.

Efficient acquiring and removal of a hazardous particulate matter (PM) have significant effects on human health. Here, we illustrate the fabrication of a superwetting electrospun polydimethylsiloxane/polymethyl methacrylate (PDMS/PMMA) membrane (EPPM) with multifunctional performance for PM2.5 capture and microdroplet transfer, where PMMA was added as a carrier polymer to the superhydrophobic PDMS, which has very low cohesive energy density. The obtained EPPM, which is composed of special bead-on-string fibers with a mean fiber diameter of 350 nm, shows a porous structure with an aperture of 7.87 µm (calculated by the bubble pressure method) and superb thermostability (up to 325 °C). The EPPM possesses an excellent PM2.5 purification efficiency of nearly up to 100% at a very low pressure drop (70 Pa, <0.07% of the atmospheric pressure) under the condition of high humidity (96 ± 3%), which is greatly advantageous over those hydrophilic filters frequently suffering the drawbacks of low efficiency or total invalidation in humid environments. In addition, benefitting from the superhydrophobic and strong adhesive properties of the membrane surface, the EPPM could complete the trace aqueous sample analysis such as "robotic hand" from superhydrophobic to hydrophilic surfaces without any contamination or loss and hold a high contact angle of 161.6° for water. Altogether, the EPPM may have technological advantages as a kind of novel fibrous filter in diverse environmental applications, including PM2.5 capture, separation, microdroplet transfer, and so on.

Salt-Rejection Solar Absorbers Based on Porous Ionic Polymers Nanowires for Desalination.

The construction of photothermal materials with ideal salt tolerance has been a major subject for efficient solar desalination. Herein, a novel photothermal material based on porous ionic polymers (PIPs) nanowires is synthesized by Sonogashira-Hagihara cross-coupling reaction using ionic salt and alkynylbenzene as building blocks. The PIPs nanowires monolith shows abundant porosity with low density, leading a superior thermal insulation. The intrinsic superhydrophilicity of PIPs nanowires endows it with desired water transportation ability. By facile spraying Chinese carbon-ink on the PIPs nanowires monolith, its light absorption can be enhanced to be 90%. Based on these merits, the PIPs nanowires based photothermal materials show high solar energy conversion efficiency (81% under 1 sun irradiation). More interestingly, its inherently ionic framework can result in an ion-ion interaction between the external ions in water and ionic groups in PIPs framework, thus leading to excellent desalination ability by combing its unique superhydrophilicity, for example, no salt accumulation is observed after 6 h duration at 1 sun irradiation. Compared with the existing salt-resistant photothermal materials, the method takes the advantage of the intrinsically ionic feature of PIPs without using any artificial process, thus may open a new way for design and fabrication of high-performance salt-rejection photothermal materials.

Overexpression of tumor necrosis factor receptor-associated protein 1 (TRAP1) are associated with poor prognosis of epithelial ovarian cancer.

Tumor necrosis factor receptor-associated protein 1 (TRAP1 or Hsp75) is a member of the mitochondrial heat shock proteins. TRAP1 expression is associated with drug and apoptosis resistance in various human cancers. This study assessed TRAP1 expression in tissue specimens of epithelial ovarian cancer (EOC) and its association with clinicopathological features and survival of EOC patients. Tissue samples from 356 patients were collected for immunohistochemical analysis of TRAP1 expression. TRAP1 levels in EOC tissues were significantly higher than that in noncancerous tissues. TRAP1 expression was associated with poor EOC differentiation, advanced pT stages, lymph node and distant metastasis, and advanced FIGO stages (p < 0.05). Kaplan-Meier survival analysis showed that TRAP1 expression was associated with poor prognosis of EOC patients and multivariate analysis revealed that TRAP1 expression (relative risk 6.720, CI 4.100-11.015, p < 0.001), tumor grade (p = 0.001), pathology stages (p = 0.001), and FIGO stage (p = 0.017) were all independent predictors of patients' overall survival. These data demonstrate for the first time that increased TRAP1 expression was significantly associated with EOC stages and poor prognosis. Future studies are needed to confirm the role of TRAP1 as a prognostic tumor marker in EOC.

Rational design of Fe, N co-doped porous carbon derived from conjugated microporous polymer as an electrocatalytic platform for oxygen reduction reaction.

Porous iron-nitrogen-doped carbons (FeNC) offer a great platform for construction of cathodic oxygen reduction reaction (ORR) catalysts in fuel cells. However, challenges still remain regarding with the collapse of carbon-skeleton during pyrolysis, uneven distribution of active sites and aggregation of metal atoms. In this work, we synthesized Fe, N co-doped conjugated microporous polymer (FeN-CMP) through a facile bottom-up strategy using 1,3,5-triethynylbenzene and iron-chelated 3,8-dibromo-1,10-phenanthroline as monomers, ensuring the uniform coordination of N with Fe element in network. Then, the resulting FeN-CMP was treated by pyrolysis without structural collapse to obtain porous FeNC electrocatalyst for ORR. The most active catalyst was fabricated under 900 °C, which exhibits remarkable ORR activity in alkaline medium with half-wave potential of 0.796 V (18 mV and 105 mV positive deviation from the commercial Pt/C catalyst and post-doping catalyst), high selectivity with nearly 4e- transfer process and excellent methanol tolerance. Our study first developed porous FeNC electrocatalysts derived from Fe, N-anchoring CMPs based on pre-functionalization of monomers, which exhibits great potential as an alternative to commercial Pt/C catalyst for ORR, and provides a feasible strategy of developing multi-atoms doping catalysts for energy storage and conversion as well as heterogeneous catalysis.

Recent advances and perspectives in solar photothermal conversion and storage systems: A review.

Developing high-efficiency solar photothermal conversion and storage (SPCS) technology is significant in solving the imbalance between the supply and demand of solar energy utilization in time and space. Aiming at the current research status in the field of SPCS, this review thoroughly examines the phase change materials and substrates in SPCS systems. It elucidates the design principles and methods of SPCS integrated composites. Comparatively, it analyzes the parameters of various types of SPCS composites in terms of photothermal conversion, thermal conductivity, energy density, and cycling stability. Additionally, the review discusses the trade-offs between each parameter to achieve the most optimal effect of SPCS. By sorting out the current status of the application of SPCS technology in solar thermal/photovoltaic, aerospace, buildings, textile, and other industries, this analysis clarifies the requirements for various latent heat, phase change temperature, and other properties under different environmental conditions. Through a comprehensive discussion of SPCS technology, this paper accurately captures the development trend of efficiently and comprehensively utilizing solar energy by analyzing existing scientific problems. It identifies bottlenecks in SPCS technology and suggests future development directions that need focused attention. The insights gained from this analysis may provide a theoretical basis for designing strategies, enhancing performance, and promoting the application of SPCS.

Vertical porous aerogel based on polypyrrole and bimetallic modified ß-cyclodextrin polymer-chitosan for efficient solar evaporation.

Solar-driven interfacial evaporation (SDIE) stands out as a prospective technology for freshwater production, playing a significant role in mitigating global water scarcity. Herein, a cyclodextrin polymer/chitosan composite aerogel (PPy-La/Al@CDP-CS) with vertically aligned channels was prepared as a solar evaporator for efficient solar steam generation. The vertically aligned pore structure, achieved through directional freezing assisted by liquid nitrogen, not only improves water transport during evaporation but also enhances light absorption through multiple reflections of sunlight within the pores. The polypyrrole particles sprayed on the surface of the aerogel acted as a light-absorbing layer, resulting in an impressive absorbance of 98.15 % under wetting conditions. The aerogel has an evaporation rate of 1.85 kg m-2 h-1 under 1 kW m-2 irradiation. Notably, the vertical pore structure of the aerogel allows it to exhibit excellent evaporation performance and salt resistance even in highly concentrated salt solutions. Furthermore, this aerogel is an excellent solar-driven interfacial evaporator for purifying seawater and fluoride-containing wastewater. This photothermal aerogel has the advantages of excellent performance, low cost, and environmental friendliness, and thus this work provides a new approach to the design and fabrication of solar photothermal materials for water treatment.

Janus membranes derived from multi-shelled hollow spheres coated electrospun PVA membranes as phase change composites for photothermal conversion.

The development and preparation of multifunctional photothermal conversion materials has far-reaching significance for the utilization of solar energy resources in response to the energy crisis. Herein, we propose a Janus membrane for interfacial solar evaporation and phase change energy storage. The membranes were fabricated via combining the PVA film with multi-shelled hollow spheres (MHS). The membranes have asymmetric wettability, that is, one side is hydrophilic and the other side is hydrophobic. The as-resulted membranes obtain outstanding light absorption without further processing. According to these two advantages, the membranes were applied to solar evaporation. The evaporation rate of the membrane is 1.41 kg*m-2h-1 and the evaporation efficiency is 92.4 % under 1sun irradiation. Moreover, the membrane prepared by impregnating 1-Hexadecanamine (HDA) into MHS possesses excellent tensile strength (2.21 MPa) and photothermal conversion ability. The light-to-thermal conversion efficiency can reach 81.9 % under 1sun irradiation. Therefore, the membranes have broad application prospects in the field of photothermal conversion.

Integrated transcriptome and microbiome analyses of residual feed intake in ducks during high production period.

Residual feed intake (RFI) is a crucial parameter for assessing the feeding efficiency of poultry. Minimizing RFI can enhance feed utilization and reduce costs. In this study, 315 healthy female ducks were individually housed in cages. Growth performance was monitored during the high laying period, from 290 to 325 d of age. The cecal transcriptome and microbiome of 12 ducks with high RFI and 12 with low residual feed intake (LRFI) were analyzed. Regarding growth performance, the LRFI group exhibited significantly lower RFI, feed conversion ratio (FCR), and feed intake (Fi) compared to the HRFI group (p < 0.01). However, there were no significant differences observed in body weight (BW), body weight gain (BWG), and egg mass (EML) between the groups (p > 0.05). Microbiome analysis demonstrated that RFI impacted gut microbial abundance, particularly affecting metabolism and disease-related microorganisms such as Romboutsia, Enterococcus, and Megamonas funiformis. Transcriptome analysis revealed that varying RFI changed the expression of genes related to glucose metabolism and lipid metabolism, including APOA1, G6PC1, PCK1, and PLIN1. The integrated analysis indicated that host genes were closely linked to the microbiota and primarily function in lipid metabolism, which may enhance feeding efficiency by influencing metabolism and maintaining gut homeostasis.

Analysis of Transcriptomic Differences in the Ovaries of High- and Low-Laying Ducks.

The egg-laying performance of Shan Ma ducks (Anas Platyrhynchos) is a crucial economic trait. Nevertheless, limited research has been conducted on the egg-laying performance of this species. We examined routine blood indicators and observed higher levels of metabolic and immune-related factors in the high-egg-production group compared with the low-egg-production group. Furthermore, we explored the ovarian transcriptome of both high- and low-egg-production groups of Shan Ma ducks using Illumina NovaSeq 6000 sequencing. A total of 1357 differentially expressed genes (DEGs) were identified, with 686 down-regulated and 671 up-regulated in the high-egg-production (HEP) ducks and low-egg-production (LEP) ducks. Several genes involved in the regulation of ovarian development, including neuropeptide Y (NPY), cell cycle protein-dependent kinase 1 (CDK1), and transcription factor 1 (E2F1), exhibited significant differential expressions at varying stages of egg production. Pathway functional analysis revealed that the DEGs were primarily associated with the steroid biosynthesis pathway, and the neuroactive ligand-receptor interaction pathway exhibited higher activity in the HEP group compared to the LEP group. This study offers valuable information about and novel insights into high egg production.

Comparative analysis of the hypothalamus transcriptome of laying ducks with different residual feeding intake.

Feed costs account for approximately 60 to 70% of the cost of poultry farming, and feed utilization is closely related to the profitability of the poultry industry. To understand the causes of the differences in feeding in Shan Partridge ducks, we compared the hypothalamus transcriptome profiles of 2 groups of ducks using RNA-seq. The 2 groups were: 1) low-residual feed intake (LRFI) group with low feed intake but high feed efficiency, and 2) high-residual feed intake (HRFI) group with high feed intake but low feed efficiency. We found 78 DEGs were enriched in 9 differential Kyoto Encyclopedia of Genes and Genome (KEGG) pathways, including neuroactive ligand-receptor interaction, GABAergic synapse, nitrogen metabolism, cAMP signaling pathway, calcium signaling pathway, nitrogen metabolism, tyrosine metabolism, ovarian steroidogenesis, and gluconeogenesis. To further identify core genes among the 78 DEGs, we performed protein-protein interaction and coexpression network analyses. After comprehensive analysis and experimental validation, 4 core genes, namely, glucagon (GCG), cholecystokinin (CCK), gamma-aminobutyric acid type A receptor subunit delta (GABRD), and gamma-aminobutyric acid type A receptor subunit beta1 (GABRB1), were identified as potential core genes responsible for the difference in residual feeding intake between the 2 breeds. We also investigated the level of cholecystokinin (CCK), neuropeptide Y (NPY), peptide YY (PYY), ghrelin, and glucagon-like peptide1 (GLP-1) hormones in the sera of Shan Partridge ducks at different feeding levels and found that there was a difference between the 2 groups with respect to GLP-1 and NPY levels. The findings will serve as a reference for future research on the feeding efficiency of Shan Partridge ducks and assist in promoting their genetic breeding.

Characterization of neuroblastoma bone invasion/metastasis in established bone metastatic model of SY5Y and KCNR cell lines.

OBJECTS: To determine the mechanism of neuroblastoma (NB) bone invasion/metastasis, it is necessary to investigate the bone invasion/metastasis-related factors in the bone invasion/metastasis process. Some evidence has suggested that various proteins were involved in bone osteolytic response. The invasion/metastasis property and gene expression of NB, however, are still unknown. METHODS: Single-cell suspensions of SY5Y and KCNR cells were injected directly into the femur of nude mice. Radiological and histological analyses, immunohistochemistry analyses, and western blot assay were performed to characterize bone metastasis mechanism in these bone metastasis models. RESULTS: SY5Y and KCNR NB cells result in osteolytic responses in bone metastasis model. Osteoprotegerin (OPG), receptor activator of NF-kappaB ligand (RANKL), parathyroid hormone-related peptide (PTHrP), endothelin 1 (ET-1), and CXCR4 were examined and compared among in vitro, in vivo, and normal bone, respectively. PTHrP, OPG, RANKL, and ET-1 except CXCR4 in SY5Y and KCNR NB cells xenografts were strikingly upregulated compared with normal bone and NB cells. However, significantly stronger expression of PTHrP and RANKL was presented than ET-1 and OPG; furthermore, the ratios of expression of PTHrP, RANKL to OPG, and ET-1 were also markedly increased in vivo versus in vitro. CONCLUSIONS: Our study provided evidence that NB cell may enhance bone invasion through PTHrP, OPG, RANKL, and ET-1, especially PTHrP and RANKL which may display stronger effects. CXCR4 appeared not participating in bone invasion, but in tumor growth, and homing to bone. Targeting PTHrP, OPG, ET-1, and RANKL may provide a new insight and method for patient therapy by inhibiting NB bone metastasis and invasiveness.

[Performance of computer-assisted imaging system in detection of squamous intraepithelial lesion of uterine cervix].

OBJECTIVE: To evaluate the performance of computer-assisted imaging system in the detection of cervical squamous intraepithelial lesion and quality-assurance. METHODS: Manual PAP screening (n = 140 580) and image-assisted screening (n = 32 885) were compared for the detection rates of squamous cell abnormalities, the atypical squamous cells (ASC) to squamous intraepithelial lesion (SIL) ratio, the positive rates of high risk human papillomavirus (HR-HPV) test in the case of atypical squamous cells of undetermined significance (ASC-US), and the correlation between cytopathology and histopathology. RESULTS: Compared with manual screening, computer-assisted imaging system showed increased overall positive detection by 0.32%, decreased detection of ASC by 0.21%, increased detection of low-grade squamous intraepithelial lesion (LSIL) by 0.22%, increased detection of high-grade squamous intraepithelial lesion or worse (HSIL) by 0.31%, and decreased ASC to SIL ratio from 2.59 to 1.60. Computer-assisted imaging system did not change the HR-HPV positive rate of the patients who were ASC-US, or the coincidence rate between cytopathology and histopathology. Moreover, the productivity of the laboratory operation increased 58.33%. CONCLUSION: Computer-assisted imaging system significantly increases the overall positive detection rate of cervical SIL, improves accuracy and work efficiency of screening, decreases the ASC/SIL rate, and strengths the quality-assurance of laboratory testing.

Fabrication of ATP/PEG/MnO2NWs composite for solar steam generation with high conversion efficiency.

Solar steam generation is widely used in seawater desalination because of its high efficiency and environmental protection. However, using low-cost materials to produce efficient solar evaporators is a severe challenge. In this study, a porous carbon material was prepared by combining Attapulgite (ATP), Polyethylene glycol (PEG) and Manganese dioxide nanowires (MnO2NWs) composite, through freeze-drying and high-temperature carbonization. The prepared CAPM aerogel shows a three-dimensional porous structure, which has high evaporation properties in pure water and simulated seawater. Under 1 sun simulated illumination, the pure water evaporation is 1.4574 kg m-2h-1 and the corresponding energy conversion efficiency is 85.94%. The prepared CAPM aerogel showed excellent durability and salt tolerance in 20%Nacl solution, indicating that the CAPM has excellent desalinization performance. In addition, CAPM aerogel has and exhibits super hydrophilic properties, which can transfer water molecules quickly. Due to the advantages of low cost, simple preparation method, and high solar energy conversion efficiency, the CAPM has excellent potential as a photothermal material for solar energy generation.

Therapeutic potential of single-nucleotide polymorphism-mediated interleukin-6 receptor blockade in cancer treatment: A Mendelian randomization study.

Background: Interleukin-6 (IL-6) is a crucial member of the cytokine network and plays a pivotal role in the pathogenesis of various diseases, including cancer. IL-6 receptor (IL-6R) blockade is widely employed as a therapeutic strategy; however, its efficacy in anticancer therapy remains ambiguous. Methods: An inverse variance-weighted Mendelian randomization (MR) analysis was conducted to assess the causal effects exerted by IL-6R blockade in remediating cancer. Drug-targeted single-nucleotide polymorphisms (SNPs) were introduced within 300 kb of the IL-6R gene. An instrumental variable comprising 26 SNPs represented IL-6 signaling downregulation and C-reactive protein level reduction. Datasets pertaining to the 33 types of cancer investigated in this study were acquired from the FinnGen genome-wide association study. Results: The selected instrumental variable lowered fibrinogen levels, confirming its ability to mimic IL-6R blockade. IL-6R blockade exhibited therapeutic effects on five different cancer types documented in the FinnGen database (N = 334,364, including 76,781 cancer patients): bladder (odds ratios (OR) = 0.563), laryngeal (OR = 0.293), eye (OR = 0.098), gallbladder (OR = 0.059), and myeloid leukemia (OR = 0.442); however, it simultaneously elevated the risk of developing basal cell carcinoma (OR = 1.312) and melanoma (OR = 1.311). Sensitivity analyses did not alter the primary results. Conclusion: Therefore, this study aimed to evaluate the potential and efficacy of SNP-based IL-6R blockade in treating cancer.

ZnO nanorods loading with fatty amine as composite PCMs device for efficient light-to-thermal and electro-to-thermal conversion.

Phase change materials (PCMs) with ideal light-to-thermal conversion efficiency play an important role in solar energy storage and conversion. Hence, we report the fabrication of a novel composite PCMs (CPCMs) device based on ZnO nanorods deposited indium tin oxide (ITO) glass loading with fatty amines. ZnO nanorods were deposited on the ITO glass using a three-electrode electrodeposition method, and 1-Hexadecylamine (HDA) was loaded on the ITO glass via spin-coating, followed by spraying polypyrrole (ppy) on the surface of CPCM device to improve thermal conductivity and solar absorption. The as-prepared CPCM device exhibits excellent light-to-thermal conversion efficiency, achieving a high conversion efficiency of 90.2% obtained at 1sun owing to its high light absorption (80%), enhanced thermal conductivity (improved by 57.8%), and the unique vertical aligned nanorods structure which could significantly decrease tortuosity, thereby reducing thermal route and lowering thermal response time. Furthermore, the electro-to-thermal conversion efficiency of the CPCMs device has also been investigated and the results show that it can reach up to 69.8% under a low voltage of 5 V, indicating that the CPCM device has a high potential in the field of electro-to-thermal conversion. Based on the benefits listed above, the CPCM device may serve an ideal platform for a wide range of solar energy storage and conversion applications.

Carbonized CMPs Hollow Microspheres-Based Hydrogel Composite Membranes with a Hierarchical Architecture for Efficient Solar-Driven Interfacial Evaporation.

Solar-driven interfacial evaporation (SDIE) with excellent photothermal conversion efficiency is emerging as one of the frontier technologies for freshwater production. In this work, novel carbonized conjugate microporous polymers (CCMPs) hollow microspheres-based composite hydrogel membranes (CCMPsHM-CHM) for efficient SDIE are reported. The precursor, CMPs hollow microspheres (CMPsHM), is synthesized by an in situ Sonogashira-Hagihara cross-coupling reaction using a hard template method. The as-synthesized CCMPsHM-CHM exhibit significantly excellent properties, i.e., 3D hierarchical architecture (from micropore to macropore), superior solar light absorption (more than 89%), better thermal insulation (thermal conductivity as low as 0.32-0.42 W m-1K-1 in the wet state), superhydrophilic wettability with a water contact angle (WCA) of 0°, superior solar efficiency (up to 89-91%), a high evaporation rate of 1.48-1.51 kg m-2 h-1 under 1 sun irradiation, and excellent stability which maintains an evaporation rate of more than 80% after 10 cycles and over 83% evaporation efficiency in highly concentrated brine. In this case, the removal rate of metal ions in seawater is more than 99%, which is much lower than the ion concentration standard for drinking water set by the World Health Organization (WHO) and the United States Environmental Protection Agency (USEPA). Taking advantage of its simple and scalable manufacture, our CCMPsHM-CHM may have great potential as advanced membranes for various applications for efficient SDIE in different environments.