Roles of varying carbon chains and functional groups of legacy and emerging per-/polyfluoroalkyl substances in adsorption on metal-organic framework: Insights into mechanism and adsorption prediction.

Metal-organic frameworks (MOFs) are promising adsorbents for legacy per-/polyfluoroalkyl substances (PFASs), but they are being replaced by emerging PFASs. The effects of varying carbon chains and functional groups of emerging PFASs on their adsorption behavior on MOFs require attention. This study systematically revealed the structure-adsorption relationships and interaction mechanisms of legacy and emerging PFASs on a typical MOF MIL-101(Cr). It also presented an approach reflecting the average electronegativity of PFAS moieties for adsorption prediction. We demonstrated that short-chain or sulfonate PFASs showed higher adsorption capacities (µmol/g) on MIL-101(Cr) than their long-chain or carboxylate counterparts, respectively. Compared with linear PFASs, their branched isomers were found to exhibit a higher adsorption potential on MIL-101(Cr). In addition, the introduction of ether bond into PFAS molecule (e.g., hexafluoropropylene oxide dimeric acid, GenX) increased the adsorption capacity, while the replacement of CF2 moieties in PFAS molecule with CH2 moieties (e.g., 6:2 fluorotelomer sulfonate, 6:2 FTS) caused a decrease in adsorption. Divalent ions (such as Ca2+ and SO42-) and solution pH have a greater effect on the adsorption of PFASs containing ether bonds or more CF2 moieties. PFAS adsorption on MIL-101(Cr) was governed by electrostatic interaction, complexation, hydrogen bonding, π-CF interaction, and π-anion interaction as well as steric effects, which were associated with the molecular electronegativity and chain length of each PFAS. The average electronegativity of individual moieties (named Me) for each PFAS was estimated and found to show a significantly positive correlation with the corresponding adsorption capacity on MIL-101(Cr). The removal rates of major PFASs in contaminated groundwater by MIL-101(Cr) were also correlated with the corresponding Me values. These findings will assist with the adsorption prediction for a wide range of PFASs and contribute to tailoring efficient MOF materials.

Relationships between biodiversity and ecosystem functioning proxies strengthen when approaching chemosynthetic deep-sea methane seeps.

As biodiversity loss accelerates globally, understanding environmental influence over biodiversity-ecosystem functioning (BEF) relationships becomes crucial for ecosystem management. Theory suggests that resource supply affects the shape of BEF relationships, but this awaits detailed investigation in marine ecosystems. Here, we use deep-sea chemosynthetic methane seeps and surrounding sediments as natural laboratories in which to contrast relationships between BEF proxies along with a gradient of trophic resource availability (higher resource methane seep, to lower resource photosynthetically fuelled deep-sea habitats). We determined sediment fauna taxonomic and functional trait biodiversity, and quantified bioturbation potential (BPc), calcification degree, standing stock and density as ecosystem functioning proxies. Relationships were strongly unimodal in chemosynthetic seep habitats, but were undetectable in transitional 'chemotone' habitats and photosynthetically dependent deep-sea habitats. In seep habitats, ecosystem functioning proxies peaked below maximum biodiversity, perhaps suggesting that a small number of specialized species are important in shaping this relationship. This suggests that absolute biodiversity is not a good metric of ecosystem 'value' at methane seeps, and that these deep-sea environments may require special management to maintain ecosystem functioning under human disturbance. We promote further investigation of BEF relationships in non-traditional resource environments and emphasize that deep-sea conservation should consider 'functioning hotspots' alongside biodiversity hotspots.

Global intercomparison of polyurethane foam passive air samplers evaluating sources of variability in SVOC measurements.

Polyurethane foam passive air samplers (PUF-PAS) are the most common type of passive air sampler used for a range of semi-volatile organic compounds (SVOCs), including regulated persistent organic pollutants (POPs) and polycyclic aromatic hydrocarbons (PAHs), and emerging contaminants (e.g., novel flame retardants, phthalates, current-use pesticides). Data from PUF-PAS are key indicators of effectiveness of global regulatory actions on SVOCs, such as the Global Monitoring Plan of the Stockholm Convention on Persistent Organic Pollutants. While most PUF-PAS use similar double-dome metal shielding, there is no standardized dome size, shape, or deployment configuration, with many different PUF-PAS designs used in regional and global monitoring. Yet, no information is available on the comparability of data from studies using different PUF-PAS designs. We brought together 12 types of PUF-PAS used by different research groups around the world and deployed them in a multi-part intercomparison to evaluate the variability in reported concentrations introduced by different elements of PAS monitoring. PUF-PAS were deployed for 3 months in outdoor air in Kjeller, Norway in 2015-2016 in three phases to capture (1) the influence of sampler design on data comparability, (2) the influence of analytical variability when samplers are analyzed at different laboratories, and (3) the overall variability in global monitoring data introduced by differences in sampler configurations and analytical methods. Results indicate that while differences in sampler design (in particular, the spacing between the upper and lower sampler bowls) account for up to 50 % differences in masses collected by samplers, the variability introduced by analysis in different laboratories far exceeds this amount, resulting in differences spanning orders of magnitude for POPs and PAHs. The high level of variability due to analysis in different laboratories indicates that current SVOC air sampling data (i.e., not just for PUF-PAS but likely also for active air sampling) are not directly comparable between laboratories/monitoring programs. To support on-going efforts to mobilize more SVOC data to contribute to effectiveness evaluation, intercalibration exercises to account for uncertainties in air sampling, repeated at regular intervals, must be established to ensure analytical comparability and avoid biases in global-scale assessments of SVOCs in air caused by differences in laboratory performance.

Climate change considerations are fundamental to management of deep-sea resource extraction.

Climate change manifestation in the ocean, through warming, oxygen loss, increasing acidification, and changing particulate organic carbon flux (one metric of altered food supply), is projected to affect most deep-ocean ecosystems concomitantly with increasing direct human disturbance. Climate drivers will alter deep-sea biodiversity and associated ecosystem services, and may interact with disturbance from resource extraction activities or even climate geoengineering. We suggest that to ensure the effective management of increasing use of the deep ocean (e.g., for bottom fishing, oil and gas extraction, and deep-seabed mining), environmental management and developing regulations must consider climate change. Strategic planning, impact assessment and monitoring, spatial management, application of the precautionary approach, and full-cost accounting of extraction activities should embrace climate consciousness. Coupled climate and biological modeling approaches applied in the water and on the seafloor can help accomplish this goal. For example, Earth-System Model projections of climate-change parameters at the seafloor reveal heterogeneity in projected climate hazard and time of emergence (beyond natural variability) in regions targeted for deep-seabed mining. Models that combine climate-induced changes in ocean circulation with particle tracking predict altered transport of early life stages (larvae) under climate change. Habitat suitability models can help assess the consequences of altered larval dispersal, predict climate refugia, and identify vulnerable regions for multiple species under climate change. Engaging the deep observing community can support the necessary data provisioning to mainstream climate into the development of environmental management plans. To illustrate this approach, we focus on deep-seabed mining and the International Seabed Authority, whose mandates include regulation of all mineral-related activities in international waters and protecting the marine environment from the harmful effects of mining. However, achieving deep-ocean sustainability under the UN Sustainable Development Goals will require integration of climate consideration across all policy sectors.

Climate-induced changes in the suitable habitat of cold-water corals and commercially important deep-sea fishes in the North Atlantic.

The deep sea plays a critical role in global climate regulation through uptake and storage of heat and carbon dioxide. However, this regulating service causes warming, acidification and deoxygenation of deep waters, leading to decreased food availability at the seafloor. These changes and their projections are likely to affect productivity, biodiversity and distributions of deep-sea fauna, thereby compromising key ecosystem services. Understanding how climate change can lead to shifts in deep-sea species distributions is critically important in developing management measures. We used environmental niche modelling along with the best available species occurrence data and environmental parameters to model habitat suitability for key cold-water coral and commercially important deep-sea fish species under present-day (1951-2000) environmental conditions and to project changes under severe, high emissions future (2081-2100) climate projections (RCP8.5 scenario) for the North Atlantic Ocean. Our models projected a decrease of 28%-100% in suitable habitat for cold-water corals and a shift in suitable habitat for deep-sea fishes of 2.0°-9.9° towards higher latitudes. The largest reductions in suitable habitat were projected for the scleractinian coral Lophelia pertusa and the octocoral Paragorgia arborea, with declines of at least 79% and 99% respectively. We projected the expansion of suitable habitat by 2100 only for the fishes Helicolenus dactylopterus and Sebastes mentella (20%-30%), mostly through northern latitudinal range expansion. Our results projected limited climate refugia locations in the North Atlantic by 2100 for scleractinian corals (30%-42% of present-day suitable habitat), even smaller refugia locations for the octocorals Acanella arbuscula and Acanthogorgia armata (6%-14%), and almost no refugia for P. arborea. Our results emphasize the need to understand how anticipated climate change will affect the distribution of deep-sea species including commercially important fishes and foundation species, and highlight the importance of identifying and preserving climate refugia for a range of area-based planning and management tools.

Evidence for Major Contributions of Unintentionally Produced PCBs in the Air of China: Implications for the National Source Inventory.

Polychlorinated biphenyls (PCBs) were not widely manufactured or used in China before they became the subject of international bans on production. Recent work has shown that they have reached China associated with imported wastes and that there are considerable unintentional sources of PCBs that have only recently been identified. As such, it was hypothesized that the source inventory and profile of PCBs may be different or unique in China, compared to countries where they were widely used and which have been widely studied. For the first time in this study, we undertook a complete analysis of 209 PCB congeners and assessed the contribution of unintentionally produced PCBs (UP-PCBs) in the atmosphere of China, using polyurethane foam passive air samplers (PUF-PAS) deployed across a wide range of Chinese locations. ∑209 PCBs ranged from 9 to 6856 pg/m3 (median: 95 pg/m3) during three deployments in 2016-2017. PCB 11 was one of the most detected congeners, contributing 33 ± 19% to ∑209 PCBs. The main sources to airborne PCBs in China were estimated and ranked as pigment/painting (34%), metallurgical industry/combustion (31%), e-waste (23%), and petrochemical/plastic industry (6%). For typical Aroclor-PCBs, e-waste sources were dominated (>50%). Results from our study indicate that UP-PCBs have become the controlling source in the atmosphere of China, and an effective control strategy is urgently needed to mitigate emissions from multiple industrial sources.

Spatially Explicit Large-Scale Environmental Risk Assessment of Pharmaceuticals in Surface Water in China.

With improving healthcare and an aging population, the consumption of human pharmaceuticals in China has been increasing dramatically. Environmental risks posed by many active pharmaceutical ingredients (APIs) are still unknown. This study used a spatially explicit dilution-factor methodology to model predicted environmental concentrations (PECs) of 11 human-use APIs in surface water for a preliminary environmental risk assessment (ERA). Median PECs in surface water across China range between 0.01 and 8.0 × 103 ng/L for the different APIs, under a moderate patient use scenario. Higher environmental risks of APIs in surface water are in regions with high water stress, e.g., northern China. Levonorgestrel, estradiol, ethinyl estradiol and abiraterone acetate were predicted to potentially pose a high or moderate environmental risk in China if consumption levels reach those in Europe. Relative risks of these four APIs have the potential to be among those chemicals with the highest impact on surface water in China when compared to the risks associated with other regulated chemicals, including triclosan and some standard water quality parameters including BOD5 (5-day biological oxygen demand), COD (chemical oxygen demand), Cu, Zn, and Hg and linear alkylbenzene sulfonate. This method could support the regulation of this category of chemicals and risk mitigation strategies in China.

Insight into occurrence, profile and spatial distribution of organochlorine pesticides in soils of solid waste dumping sites of Pakistan: Influence of soil properties and implications for environmental fate.

Waste dumping sites are considered as significant disposal pathway for waste contaminants including pesticides. In the present study OCPs were analyzed in soils of waste dumping sites of Pakistan. The mean concentrations of OCPs were in the order: ∑DDTs>∑HCHs>∑Endosulfan>∑HCB>Heptachlor. Order of overall ∑OCPs contamination with respect to location was Lahore>Sukkur>Karachi>Kamoki>Faisalabad>Hyderabad>Losar>Gujrat>Peshawar. Distribution of OCPs in solid waste dumping site was mainly influenced by textural classes, input history and pollution source. Soil texture was the dominant factor for retention of OCPs, whereas TOC and black carbon has not significantly impacted the concentrations of OCPs. Diagnostic ratios indicated the historical input, anaerobic degradation pathway and use of technical mixtures of DDTs in majority of waste dumping sites whereas for HCHs recent as well as past usage of technical mixture was prevalent in most of the areas. Regression analysis revealed a weak positive correlation of OCPs with socioeconomic indices (HDI, Population, waste generation) which is linked with history of use of these contaminants in the respective areas. Forecasted waste generation quantity for the year 2026 showed that waste generation amount will get doubled by the year 2026 suggesting the need properly designed waste management system.

Urban-rural gradients of polycyclic aromatic hydrocarbons in soils at a regional scale: Quantification and prediction.

The quantitative study of urban-rural gradients for persistent organic pollutants (POPs) is extremely important to understand the behavior of POPs as well as for ecological risk assessment and management. In this study, a practical urban-rural gradient model (URGM) was developed using atmospheric point source diffusion combined with a fugacity approach to test potential mathematical relationships among urban and rural soils. The mean value of polycyclic aromatic hydrocarbons (PAHs) for urban soils (0-2-km sites) was 570.80 ng/g, and was approximately 3.5 times higher than rural soils (30-50 km sites). Significant linear correlations were found between the amounts of PAHs in the surface soil and the city population and between the soil concentration and artificial surface area. Urban-rural PAH concentrations were simulated by the URGM and calibrated by city population and land-cover data, with average relative errors of 12.84%. The results showed that the URGM was suitable for simulating urban-rural PAH concentrations at a regional scale. The combustion of fossil fuels, biomass, and coal was the main source of soil PAHs in the study area, and the characteristic ratios of PAHs indicated a transition trend from pyrogenic to petrogenic sources along the urban-rural transects. This study thus provides a combined method for quantifying urban-rural gradients of PAHs and can thereby promote quantitative research on coupling among land cover, socio-economic data, and POP concentrations.

Modeling the Time-Variant Dietary Exposure of PCBs in China over the Period 1930 to 2100.

This study aimed for the first time to reconstruct historical exposure profiles for PCBs to the Chinese population, by examining the combined effect of changing temporal emissions and dietary transition. A long-term (1930-2100) dynamic simulation of human exposure using realistic emission scenarios, including primary emissions, unintentional emissions, and emissions from e-waste, combined with dietary transition trends was conducted by a multimedia fate model (BETR-Global) linked to a bioaccumulation model (ACC-HUMAN). The model predicted an approximate 30-year delay of peak body burden for PCB-153 in a 30-year-old Chinese female, compared to their European counterpart. This was mainly attributed to a combination of change in diet and divergent emission patterns in China. A fish-based diet was predicted to result in up to 8 times higher body burden than a vegetable-based diet (2010-2100). During the production period, a worst-case scenario assuming only consumption of imported food from a region with more extensive production and usage of PCBs would result in up to 4 times higher body burden compared to consumption of only locally produced food. However, such differences gradually diminished after cessation of production. Therefore, emission reductions in China alone may not be sufficient to protect human health from PCB-like chemicals, particularly during the period of mass production. The results from this study illustrate that human exposure is also likely to be dictated by inflows of PCBs via the environment, waste, and food.

Long-Term Temporal Trends of Polychlorinated Biphenyls and Their Controlling Sources in China.

Polychlorinated biphenyls (PCBs) are industrial organic contaminants identified as persistent, bioaccumulative, toxic (PBT), and subject to long-range transport (LRT) with global scale significance. This study focuses on a reconstruction and prediction for China of long-term emission trends of intentionally and unintentionally produced (UP) ∑7PCBs (UP-PCBs, from the manufacture of steel, cement and sinter iron) and their re-emissions from secondary sources (e.g., soils and vegetation) using a dynamic fate model (BETR-Global). Contemporary emission estimates combined with predictions from the multimedia fate model suggest that primary sources still dominate, although unintentional sources are predicted to become a main contributor from 2035 for PCB-28. Imported e-waste is predicted to play an increasing role until 2020-2030 on a national scale due to the decline of intentionally produced (IP) emissions. Hypothetical emission scenarios suggest that China could become a potential source to neighboring regions with a net output of ∼0.4 t year-1 by around 2050. However, future emission scenarios and hence model results will be dictated by the efficiency of control measures.

DGT Passive Sampling for Quantitative in Situ Measurements of Compounds from Household and Personal Care Products in Waters.

Widespread use of organic chemicals in household and personal care products (HPCPs) and their discharge into aquatic systems means reliable, robust techniques to monitor environmental concentrations are needed. The passive sampling approach of diffusive gradients in thin-films (DGT) is developed here and demonstrated to provide in situ quantitative and time-weighted average (TWA) measurement of these chemicals in waters. The novel technique is developed for HPCPs, including preservatives, antioxidants and disinfectants, by evaluating the performance of different binding agents. Ultrasonic extraction of binding gels in acetonitrile gave good and consistent recoveries for all test chemicals. Uptake by DGT with HLB (hydrophilic-lipophilic-balanced) as the binding agent was relatively independent of pH (3.5-9.5), ionic strength (0.001-0.1 M) and dissolved organic matter (0-20 mg L-1), making it suitable for applications across a wide range of environments. Deployment time and diffusion layer thickness dependence experiments confirmed DGT accumulated chemicals masses are consistent with theoretical predictions. The technique was further tested and applied in the influent and effluent of a wastewater treatment plant. Results were compared with conventional grab-sampling and 24-h-composited samples from autosamplers. DGT provided TWA concentrations over up to 18 days deployment, with minimal effects from biofouling or the diffusive boundary layer. The field application demonstrated advantages of the DGT technique: it gives in situ analyte preconcentration in a simple matrix, with more quantitative measurement of the HPCP analytes.

Biotic and human vulnerability to projected changes in ocean biogeochemistry over the 21st century.

Ongoing greenhouse gas emissions can modify climate processes and induce shifts in ocean temperature, pH, oxygen concentration, and productivity, which in turn could alter biological and social systems. Here, we provide a synoptic global assessment of the simultaneous changes in future ocean biogeochemical variables over marine biota and their broader implications for people. We analyzed modern Earth System Models forced by greenhouse gas concentration pathways until 2100 and showed that the entire world's ocean surface will be simultaneously impacted by varying intensities of ocean warming, acidification, oxygen depletion, or shortfalls in productivity. In contrast, only a small fraction of the world's ocean surface, mostly in polar regions, will experience increased oxygenation and productivity, while almost nowhere will there be ocean cooling or pH elevation. We compiled the global distribution of 32 marine habitats and biodiversity hotspots and found that they would all experience simultaneous exposure to changes in multiple biogeochemical variables. This superposition highlights the high risk for synergistic ecosystem responses, the suite of physiological adaptations needed to cope with future climate change, and the potential for reorganization of global biodiversity patterns. If co-occurring biogeochemical changes influence the delivery of ocean goods and services, then they could also have a considerable effect on human welfare. Approximately 470 to 870 million of the poorest people in the world rely heavily on the ocean for food, jobs, and revenues and live in countries that will be most affected by simultaneous changes in ocean biogeochemistry. These results highlight the high risk of degradation of marine ecosystems and associated human hardship expected in a future following current trends in anthropogenic greenhouse gas emissions.

Tracking the Global Distribution of Persistent Organic Pollutants Accounting for E-Waste Exports to Developing Regions.

Elevated concentrations of various industrial-use Persistent Organic Pollutants (POPs), such as polychlorinated biphenyls (PCBs), have been reported in some developing areas in subtropical and tropical regions known to be destinations of e-waste. We used a recent inventory of the global generation and exports of e-waste to develop various global scale emission scenarios for industrial-use organic contaminants (IUOCs). For representative IUOCs (RIUOCs), only hypothetical emissions via passive volatilization from e-waste were considered whereas for PCBs, historical emissions throughout the chemical life-cycle (i.e., manufacturing, use, disposal) were included. The environmental transport and fate of RIUOCs and PCBs were then simulated using the BETR Global 2.0 model. Export of e-waste is expected to increase and sustain global emissions beyond the baseline scenario, which assumes no export. A comparison between model predictions and observations for PCBs in selected recipient regions generally suggests a better agreement when exports are accounted for. This study may be the first to integrate the global transport of IUOCs in waste with their long-range transport in air and water. The results call for integrated chemical management strategies on a global scale.

A Multimedia Fate Model to Support Chemical Management in China: A Case Study for Selected Trace Organics.

SESAMe v3.3, a spatially explicit multimedia fate model for China, is a tool suggested to support quantitative risk assessment for national scale chemical management. The key advantage over the previous version SESAMe v3.0 is consideration of spatially varied environmental pH. We evaluate the model performance using estimates of emission from total industry usage of three UV filters (benzophenone-3, octocrylene, and octyl methoxycinnamate) and three antimicrobials (triclosan, triclocarban, and climbazole). The model generally performs well for the six case study chemicals as shown by the comparison between predictions and measurements. The importance of accounting for chemical ionization is demonstrated with the fate and partitioning of both triclosan and climbazole sensitivity to environmental pH. The model predicts ionizable chemicals (triclosan, climbazole, benzophenone-3) to primarily partition into soils at steady state, despite hypothetically only being released to freshwaters, as a result of agricultural irrigation by freshwater. However, further model calibration is needed when more field data becomes available for soils and sediments and for larger areas of water. As an example, accounting for the effect of pH in the environmental risk assessment of triclosan, limited freshwater areas (0.03% or ca. 55 km(2)) in mainland China are modeled to exceed its conservative environmental no-effect threshold. SESAMe v3.3 can be used to support the development of chemical risk assessment methodologies with the spatial aspects of the model providing a guide to the identification regions of interest in which to focus monitoring campaigns or develop a refined risk assessment.

Environmental Distributions of Benzo[a]pyrene in China: Current and Future Emission Reduction Scenarios Explored Using a Spatially Explicit Multimedia Fate Model.

SESAMe v3.0, a spatially explicit multimedia fate model with 50 × 50 km(2) resolution, has been developed for China to predict environmental concentrations of benzo[a]pyrene (BaP) using an atmospheric emission inventory for 2007. Model predictions are compared with environmental monitoring data obtained from an extensive review of the literature. The model performs well in predicting multimedia concentrations and distributions. Predicted concentrations are compared with guideline values; highest values with some exceedances occur mainly in the North China Plain, Mid Inner Mongolia, and parts of three northeast provinces, Xi'an, Shanghai, and south of Jiangsu province, East Sichuan Basin, middle of Guizhou and Guangzhou. Two potential future scenarios have been assessed using SESAMe v3.0 for 2030 as BaP emission is reduced by (1) technological improvement for coal consumption in energy production and industry sectors in Scenario 1 (Sc1) and (2) technological improvement and control of indoor biomass burning for cooking and indoor space heating and prohibition of open burning of biomass in 2030 in Scenario 2 (Sc2). Sc2 is more efficient in reducing the areas with exceedance of guideline values. Use of SESAMe v3.0 provides insights on future research needs and can inform decision making on options for source reduction.

Applicability of western chemical dietary exposure models to the Chinese population.

A range of exposure models, which have been developed in Europe and North America, are playing an increasingly important role in priority setting and the risk assessment of chemicals. However, the applicability of these tools, which are based on Western dietary exposure pathways, to estimate chemical exposure to the Chinese population to support the development of a risk-based environment and exposure assessment, is unclear. Three frequently used modelling tools, EUSES, RAIDAR and ACC-HUMANsteady, have been evaluated in terms of human dietary exposure estimation by application to a range of chemicals with different physicochemical properties under both model default and Chinese dietary scenarios. Hence, the modelling approaches were assessed by considering dietary pattern differences only. The predicted dietary exposure pathways were compared under both scenarios using a range of hypothetical and current emerging contaminants. Although the differences across models are greater than those between dietary scenarios, model predictions indicated that dietary preference can have a significant impact on human exposure, with the relatively high consumption of vegetables and cereals resulting in higher exposure via plants-based foodstuffs under Chinese consumption patterns compared to Western diets. The selected models demonstrated a good ability to identify key dietary exposure pathways which can be used for screening purposes and an evaluative risk assessment. However, some model adaptations will be required to cover a number of important Chinese exposure pathways, such as freshwater farmed-fish, grains and pork.

Rapid scavenging of jellyfish carcasses reveals the importance of gelatinous material to deep-sea food webs.

Jellyfish blooms are common in many oceans, and anthropogenic changes appear to have increased their magnitude in some regions. Although mass falls of jellyfish carcasses have been observed recently at the deep seafloor, the dense necrophage aggregations and rapid consumption rates typical for vertebrate carrion have not been documented. This has led to a paradigm of limited energy transfer to higher trophic levels at jelly falls relative to vertebrate organic falls. We show from baited camera deployments in the Norwegian deep sea that dense aggregations of deep-sea scavengers (more than 1000 animals at peak densities) can rapidly form at jellyfish baits and consume entire jellyfish carcasses in 2.5 h. We also show that scavenging rates on jellyfish are not significantly different from fish carrion of similar mass, and reveal that scavenging communities typical for the NE Atlantic bathyal zone, including the Atlantic hagfish, galatheid crabs, decapod shrimp and lyssianasid amphipods, consume both types of carcasses. These rapid jellyfish carrion consumption rates suggest that the contribution of gelatinous material to organic fluxes may be seriously underestimated in some regions, because jelly falls may disappear much more rapidly than previously thought. Our results also demonstrate that the energy contained in gelatinous carrion can be efficiently incorporated into large numbers of deep-sea scavengers and food webs, lessening the expected impacts (e.g. smothering of the seafloor) of enhanced jellyfish production on deep-sea ecosystems and pelagic-benthic coupling.