3D printing of responsive chiral photonic nanostructures.

Finely controlled flow forces in extrusion-based additive manufacturing can be exploited to program the self-assembly of malleable nanostructures in soft materials by integrating bottom-up design into a top-down processing approach. Here, we leverage the processing parameters offered by direct ink-writing (DIW) to reconfigure the photonic chiral nematic liquid crystalline phase in hydroxypropyl cellulose (HPC) solutions prior to deposition on the writing substrate to direct structural evolution from a particular initial condition. Moreover, we incorporate polyethylene glycol (PEG) into iridescent HPC inks to form a physically cross-linked network capable of inducing kinetic arrest of the cholesteric/chiral pitch at length scales that selectively reflect light throughout the visible spectrum. Based on thorough rheological measurements, we have found that printing the chiral inks at a shear rate where HPC molecules adopt pseudonematic state results in uniform chiral recovery following flow cessation and enhanced optical properties in the solid state. Printing chiral inks at high shear rates, on the other hand, shifts the monochromatic appearance of the extruded filaments to a highly angle-dependent state, suggesting a preferred orientation of the chiral domains. The optical response of these filaments when exposed to mechanical deformation can be used in the development of optical sensors.

3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures.

Architected materials with nano/microscale orders can provide superior mechanical properties; however, reproducing such levels of ordering in complex structures has remained challenging. Inspired by Bouligand structures in nature, here, 3D printing of complex geometries with guided long-order radially twisted chiral hierarchy, using cellulose nanocrystals (CNC)-based inks is presented. Detailed rheological measurements, in situ flow analysis, polarized optical microscopy (POM), and director field analysis are employed to evaluate the chiral assembly over the printing process. It is demonstrated that shear flow forces inside the 3D printer's nozzle orient individual CNC particles forming a pseudo-nematic phase that relaxes to uniformly aligned concentric chiral nematic structures after the flow cessation. Acrylamide, a photo-curable monomer, is incorporated to arrest the concentric chiral arrangements within the printed filaments. The time series POM snapshots show that adding the photo-curable monomer at the optimized concentrations does not interfere with chiral self-assemblies and instead increases the chiral relaxation rate. Due to the liquid-like nature of the as-printed inks, optimized Carbopol microgels are used to support printed filaments before photo-polymerization. By paving the path towards developing bio-inspired materials with nanoscale hierarchies in larger-scale printed constructs, this biomimetic approach expands 3D printing materials beyond what has been realized so far.

Capillary Flow Characterizations of Chiral Nematic Cellulose Nanocrystal Suspensions.

Studying the flow-induced alignment of anisotropic liquid crystalline materials is of major importance in the 3D printing of advanced architectures. However, in situ characterization and quantitative measurements of local orientations during the 3D printing process are challenging. Here, we report a microfluidic strategy integrated with polarized optical microscopy (POM) to perform the in situ characterization of the alignment of cellulose nanocrystals (CNCs) under the shear-flow condition of the 3D printer's nozzle in the direct ink writing process. To quantify the alignment, we exploited birefringence measurements under white and monochromatic light. We show that the flow-induced birefringence patterns are significantly influenced by the initial structure of the aqueous CNC suspensions. Depending on the CNC concentration and sonication treatment, various structures can form in the CNC suspensions, such as isotropic, chiral nematic (cholesteric), and nematic (gel-like) structures. In the chiral nematic phase, in particular, the shear flow in the microfluidic capillary has a distinct effect on the alignment of the CNC particles. Our experimental results, complemented by hydrodynamic simulations, reveal that at high flow rates (Er ≈ 1000), individual CNC particles align with the flow exhibiting a weak chiral structure. In contrast, at lower flow rates (Er ≈ 241), they display the double-twisted cylinder structure. Understanding the flow effect on the alignment of the chiral liquid crystal can pave the way to designing 3D printed architectures with internal chirality for advanced mechanical and smart photonic applications.

Director Distortion and Phase Modulation in Deformable Nematic and Smectic Liquid Crystal Spheroids.

The growing interest in integrating liquid crystals (LCs) into flexible and miniaturized technologies brings about the need to understand the interplay between spatially curved geometry, surface anchoring, and the order associated with these materials. Here, we integrate experimental methods and computational simulations to explore the competition between surface-induced orientation and the effects of deformable curved boundaries in uniaxially and biaxially stretched nematic and smectic microdroplets. We find that the director field of the nematic LCs upon uniaxial strain reorients and forms a larger twisted defect ring to adjust to the new deformed geometry of the stretched droplet. Upon biaxial extension, the director field initially twists in the now oblate geometry and subsequently transitions into a uniform vertical orientation at high strains. In smectic microdroplets, on the other hand, LC alignment transforms from a radial smectic layering to a quasi-flat layering in a compromise between interfacial and dilatation forces. Upon removing the mechanical strain, the smectic LC recovers its initial radial configuration; however, the oblate geometry traps the nematic LC in the metastable vertical state. These findings offer a basis for the rational design of LC-based flexible devices, including wearable sensors, flexible displays, and smart windows.

Translocation Behaviors of Synthetic Polyelectrolytes through Alpha-Hemolysin (α-HL) and Mycobacterium smegmatis Porin A (MspA) Nanopores.

DNAs have been used as probes for nanopore sensing of noncharged biomacromolecules due to its negative phosphate backbone. Inspired by this, we explored the potential of diblock synthetic polyelectrolytes as more flexible and inexpensive nanopore sensing probes by investigating translocation behaviors of PEO-b-PSS and PEO-b-PVBTMA through commonly used alpha-hemolysin (α-HL) and Mycobacterium smegmatis porin A (MspA) nanopores. Translocation recordings in different configurations of pore orientation and testing voltage indicated efficient PEO-b-PSS translocations through α-HL and PEO-b-PVBTMA translocations through MspA. This work provides insight into synthetic polyelectrolyte-based probes to expand probe selection and flexibility for nanopore sensing.

Segmental Dynamics and Cooperativity Length of PMMA/SAN Miscible Blend Intercalated in Organically Modified Nanoclay.

The effect of nanoconfinement on the segmental dynamics of a poly(methyl methacrylate) (PMMA)/poly(styrene- ran-acrylonitrile) (SAN) miscible blend, intercalated into the interlayer spacing of the organically modified nanoclay (OMNC), was investigated using dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) methods. We reported an unusual phenomenon in which the weak interfacial interactions between the polymer chains and OMNCs was responsible for increase in segmental mobility at the glass-transition temperature ( Tg). Remarkably, we found a positive correlation between dynamic fragility and thermodynamic fragility, in which both fragilities decreased under nanoconfinement. The cooperative length of segmental motions, or length of cooperatively rearranging regions, ξCRR, decreased from 2.64 nm for the PMMA/SAN blend to 1.86 nm for the PMMA/SAN/OMNC nanocomposite. The segmental mobility of the PMMA/SAN/OMNC model was also studied using the molecular dynamics simulations. The simulation results showed the increased segmental mobility of the PMMA/SAN chains in the presence of OMNCs, which is in agreement with the DMA and DSC results.

Molecular Structure of Canonical Liquid Crystal Interfaces.

Numerous applications of liquid crystals rely on control of molecular orientation at an interface. However, little is known about the precise molecular structure of such interfaces. In this work, synchrotron X-ray reflectivity measurements, accompanied by large-scale atomistic molecular dynamics simulations, are used for the first time to reconstruct the air-liquid crystal interface of a nematic material, namely, 4-pentyl-4'-cyanobiphenyl (5CB). The results are compared to those for 4-octyl-4'-cyanobiphenyl (8CB) which, in addition to adopting isotropic and nematic states, can also form a smectic phase. Our findings indicate that the air interface imprints a highly ordered structure into the material; such a local structure then propagates well into the bulk of the liquid crystal, particularly for nematic and smectic phases.

Collective migration and cell jamming.

Our traditional physical picture holds with the intuitive notion that each individual cell comprising the cellular collective senses signals or gradients and then mobilizes physical forces in response. Those forces, in turn, drive local cellular motions from which collective cellular migrations emerge. Although it does not account for spontaneous noisy fluctuations that can be quite large, the tacit assumption has been one of linear causality in which systematic local motions, on average, are the shadow of local forces, and these local forces are the shadow of the local signals. New lines of evidence now suggest a rather different physical picture in which dominant mechanical events may not be local, the cascade of mechanical causality may be not so linear, and, surprisingly, the fluctuations may not be noise as much as they are an essential feature of mechanism. Here we argue for a novel synthesis in which fluctuations and non-local cooperative events that typify the cellular collective might be illuminated by the unifying concept of cell jamming. Jamming has the potential to pull together diverse factors that are already known to contribute but previously had been considered for the most part as acting separately and independently. These include cellular crowding, intercellular force transmission, cadherin-dependent cell-cell adhesion, integrin-dependent cell-substrate adhesion, myosin-dependent motile force and contractility, actin-dependent deformability, proliferation, compression and stretch.

Size-dependent viscoelasticity in hybrid colloidal gels based on spherical soft nanoparticles and two-dimensional nanosilicates of varying size.

HYPOTHESIS: Hetero-aggregation of oppositely charged colloidal particles with controlled architectural and interactional asymmetry allows modifying gel nanostructure and properties. We hypothesize the relative size ratio between cationic nanospheres and varied-size anionic two-dimensional nanoclays will influence the gel formation mechanisms and resulting rheological performance. EXPERIMENTS: Hybrid colloidal gels formed via hetero-aggregation of cationic gelatin nanospheres (∼400 nm diameter) and five types of nanoclays with similar 1 nm thickness but different lateral sizes ranging from âˆ¼ 30 nm to âˆ¼ 3000 nm. Structure-property relationships were elucidated using a suite of techniques. Microscopy and scattering probed gel nanostructure and particle configuration. Rheology quantified linear and non-linear viscoelastic properties and yielding behavior. Birefringence and polarized imaging assessed size-dependent nanoclay alignment during shear flow. FINDINGS: Nanoclay size ratio relative to nanospheres affected the gelation process, network structure, elasticity, yielding, and shear response. Gels with comparably sized components showed maximum elasticity, while yield stress depended on nanoclay rotational mobility. Shear-induced nanoclay alignment was quantified by birefringence, which is more pronounced for larger nanoclay. Varying nanoclay size and interactions with nanospheres controlled dispersion, aggregation, and nematic ordering. These findings indicate that architectural and interactional asymmetry enables more control over gel properties through controlled assembly of anisotropic building blocks.

Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs.

Helical hierarchy found in biomolecules like cellulose, chitin, and collagen underpins the remarkable mechanical strength and vibrant colors observed in living organisms. This study advances the integration of helical/chiral assembly and 3D printing technology, providing precise spatial control over chiral nano/microstructures of rod-shaped colloidal nanoparticles in intricate geometries. We designed reactive chiral inks based on cellulose nanocrystal (CNC) suspensions and acrylamide monomers, enabling the chiral assembly at nano/microscale, beyond the resolution seen in printed materials. We employed a range of complementary techniques including Orthogonal Superposition rheometry and in situ rheo-optic measurements under steady shear rate conditions. These techniques help us to understand the nature of the nonlinear flow behavior of the chiral inks, and directly probe the flow-induced microstructural dynamics and phase transitions at constant shear rates, as well as their post-flow relaxation. Furthermore, we analyzed the photo-curing process to identify key parameters affecting gelation kinetics and structural integrity of the printed object within the supporting bath. These insights into the interplay between the chiral inks self-assembly dynamics, 3D printing flow kinematics and photo-polymerization kinetics provide a roadmap to direct the out-of-equilibrium arrangement of CNC particles in the 3D printed filaments, ranging from uniform nematic to 3D concentric chiral structures with controlled pitch length, as well as random orientation of chiral domains. Our biomimetic approach can pave the way for the creation of materials with superior mechanical properties or programable photonic responses that arise from 3D nano/microstructure and can be translated into larger scale 3D printed designs.

Hybrid colloidal gels with tunable elasticity formed by charge-driven assembly between spherical soft nanoparticles and discotic nanosilicates.

Colloidal gels based on electrostatic interparticle attractions hold unexploited potential for tailoring their microstructure and properties. Here, we demonstrate that hetero-aggregation between oppositely charged particles with different geometries is a viable strategy for controlling their properties. Specifically, we studied hybrid colloidal gels prepared by the charge-driven assembly of oppositely charged spherical gelatin nanoparticles and two-dimensional (2D) nanosilicates. We show that the asymmetry between the building blocks and the resulting anisotropic interparticle interactions produces a variety of nanostructures and hybrid colloidal gels that exhibit high elasticity at low colloidal volume fractions. Tuning the competition between different attractive interactions in the system by varying the spatial charge heterogeneity on the 2D nanosheets, composition, and ionic strength was found to alter the mechanism of gel formation and their rheological properties. Remarkably, increasing the mass ratio of 2D nanosheets to spherical nanoparticles at a constant total mass fraction affords hybrid gels that exhibit an inverse relationship between elasticity and volume fraction. However, these hybrid gels are easily fluidized and exhibit rapid structural recovery once the stress is removed. These features allow for the engineering of versatile 3D-printable hybrid colloidal gels, whose structure and viscoelastic response are governed by parameters that have not been explored before.

Tuning the Self-Assembled Morphology of Ti3C2Tx MXene-Based Hybrids for High-Performance Electromagnetic Interference Shielding.

Hybrid materials based on transition metal carbide and nitride (MXene) nanosheets have great potential for electromagnetic interference (EMI) shielding due to their excellent electrical conductivity. However, the performance of final products depends not only on the properties of constituent components but also on the morphology of the assembly. Here, via the controlled diffusion of positively charged poly(allylamine hydrochloride) (PAH) chains into the negatively charged Ti3C2Tx MXene suspension, MXene/PAH hybrids in the forms of thin films, porous structures, and fibers with distinguished internal morphologies are obtained. Our results confirm that PAH chains could effectively enhance the oxidation stability and integrity of wet and dry MXene structures. The flexibility to tune the structures allows for a thorough discussion of the relations between the morphology, electrical conductivity, and EMI shielding mechanism of the hybrids in a wide range of electrical conductivity (2.5 to 3347 S·cm-1) and thickness (7.7 to 1900 µm) values. The analysis of thin films shows the direct impact of the polymer content on the alignment and compactness of MXene nanosheets regulating the films' electrical conductivity/EMI shielding effectiveness. The colloidal behavior of the initial MXene suspension determines the interconnection of MXene nanosheets in MXene/PAH porous assemblies and the final electrical properties. In addition to the internal morphology, examining the laminated MXene/PAH fibers with geometrically different arrangements demonstrates the role of conductive network configuration on EMI shielding performance. These findings provide insights into tuning the EMI shielding effectiveness via the charge-driven bottom-up assembly of electrically conductive MXene/polyelectrolyte hybrids.

Biocompatible chemical network of α-cellulose-ESBO (epoxidized soybean oil) scaffold for tissue engineering application.

Despite many desirable properties, the use of α-cellulose in biomedical applications is limited because of its poor processability. Here we demonstrate that the chemical network of α-cellulose and epoxidized soybean oil (ESBO) can be adequately processed into biocompatible, self-standing, highly-porous scaffolds for tissue engineering applications. First, α-cellulose was dissolved in N-Methylmorpholine N-oxide monohydrate (NMMO.MH) and chemically crosslinked by ESBO. Then, the porous scaffolds of α-cellulose-ESBO were fabricated by solvent exchange and freeze-drying techniques. The scaffolds were evaluated for morphology, thermal and mechanical stability, and in vitro cell attachment and cell viability. Scanning electron microscopy images and Brunauer-Emmett-Teller results suggested that porous scaffolds provide a good surface and internal structure for cell adhesion and growth. Specifically, the α-cellulose-ESBO scaffolds support the homogeneous attachment and proliferation of MG63 cells. Overall, our results suggest that α-cellulose-ESBO chemically crosslinked networks are biocompatible and demonstrate a remarkable capacity for the development of tissue engineering platforms.

Applications of MXene-based membranes in water purification: A review.

Since MXenes (a new family of two-dimensional materials) were first produced in 2011, they have become very attractive nanomaterials due to their unique properties and the range of potential industrial applications. Numerous recent studies have discussed the environmental applications of different MXenes in adsorption, catalysis, and membranes. Only a limited number of MXene-based membrane studies have been published to date, and most have discussed only specific MXenes (i.e., Ti3C2Tx), a small number of solutes (e.g., dyes and inorganic salts), and laboratory-scale short-term experiments under limited water-quality and operational conditions. In addition, to our knowledge, there has been no review of MXene-membrane studies. It is therefore essential to assess the current status of understanding of the performance of these membranes in liquid separation and water purification. Here, a comprehensive literature review is conducted to summarize the current preparation techniques for MXene-based membranes and their applications, particularly in terms of environmental and industrial applications (e.g., water treatment and organic solvent filtration), and to direct future research by identifying gaps in our present understanding. In particular, this review focuses on several key factors, including the effects of preparation techniques on membrane properties, operational conditions, and compound properties that influence liquid separation during MXene-based membrane filtration.

Pickering emulsion stabilized by amphiphilic pH-sensitive starch nanoparticles as therapeutic containers.

In this paper, we report the use of amphiphilic crosslinked starch nanoparticles (CSTNs) as biocompatible, biodegradable and effective stabilizer for Pickering emulsion formulation. The nearly monodispersed CSTNs (˜140 nm) were synthesized through alkali-freezing method followed by crosslinking using citric acid. The prepared nanoparticles were characterized by field emission scanning electron microscopy, zeta-potential measurements, dynamic light scattering, and Fourier transform infrared spectroscopy. The efficacy of the CSTNs toward the stability, the oil droplet size distribution and the surface area moment mean diameter (d3,2) of sunflower oil-in-water emulsions were then assessed as a function of pH. Increase in pH from 3 to 5 and 7.4 led to an enhance in the emulsion stability, decrease in d3,2 and narrowing of the size distribution of emulsions droplets. Moreover, the abundance of nanoparticles increased with pH so that the surface coverage for pH 3, 5 and 7.4 were calculated 10.6, 14.8 and 22.2%, respectively. In vitro controlled release studies showed that the encapsulated curcumin, as a lipophilic and therapeutic compound, into the Pickering emulsion can be tuned by pH of the release media; drug release increases with pH. Collectively, the facile preparation of emulsions stabilized by solid particles derived from biocompatible and renewable resources along with the pH responsivity of these emulsions make them promising drug carriers to treat gastrointestinal tissue disorders via oral drug delivery.

Gelatin-Graphene Nanocomposites with Ultralow Electrical Percolation Threshold.

Gelatin-graphene conductive biopolymer nanocomposites (CPCs) with ultralow percolation threshold are designed by reducing in situ graphene oxide nanosheets with ascorbic acid and suppressing the aggregation of the graphene nanosheets. The resulting conductive nanocomposites show a record-low electrical percolation threshold of 3.3 × 10(-2) vol%, which arises from the homogeneous dispersion of the graphene nanosheets within the gelatin matrix.

Glass-like dynamics in the cell and in cellular collectives.

Prominent fluctuations, heterogeneity, and cooperativity dominate the dynamics of the cytoskeleton as well as the dynamics of the cellular collective. Such systems are out of equilibrium, disordered, and remain poorly understood. To explain these findings, we consider a unifying mechanistic rubric that imagines these systems as comprising phases of soft condensed matter in proximity to a glass or jamming transition, with associated transitions between solid-like versus liquid-like phases. At the scale of the cytoskeleton, data suggest that intermittent dynamics, kinetic arrest, and dynamic heterogeneity represent mesoscale features of glassy protein-protein interactions that link underlying biochemical events to integrative cellular behaviors such as crawling, contraction, and remodeling. At the scale of the multicellular collective, jamming has the potential to unify diverse biological factors that previously had been considered mostly as acting separately and independently. Although a quantitative relationship between intra- and intercellular dynamics is still lacking, glassy dynamics and jamming offer insights linking the mechanobiology of cell to human physiology and pathophysiology.

Fish gelatin/Laponite biohybrid elastic coacervates: a complexation kinetics-structure relationship study.

Complex coacervation in exfoliated Laponite nanoplatelets and fish gelatin mixtures was studied as a function of four key parameters: pH, ionic strength, gelatin/Laponite weight ratio, and total weight. The aim was to understand how these parameters influence phase separation kinetics, composition, internal structure, and viscoelastic properties of coacervates. By careful experimental design and turbidity measurements, the optimum conditions for coacervation were obtained. Thermogravimetric analysis revealed an outstanding heat-resistance for gelatin/nanoclay coacervates. Finally, structure of the coacervate phase was characterized by oscillatory shear experiments. The storage modulus data was observed to follow a power-law behavior and it was confirmed that under the optimum conditions, the coacervate phase was dense and structured with a characteristic length scale (ξrheol) of ~8.25 nm. Regardless of the physicochemical condition at which complexation occurred, it was shown that the equilibrium structure of the coacervates is related to the kinetics of intermediate and late stages of phase separation; as the new defined kinetics parameter K was observed to be inversely proportional to ξrheol that quantifies the compactness of the coacervate networks.