A Versatile Strategy for Concurrent Passive Daytime Radiative Cooling and Sustainable Energy Harvesting.

Developing versatile systems that can concurrently achieve energy saving and energy generation is critical to accelerate carbon neutrality. However, challenges on designing highly effective, large scale, and multifunctional photonic film hinder the concurrent combination of passive daytime radiative cooling (PDRC) and utilization of sustainable clean energies. Herein, a versatile scalable photonic film (Ecoflex@h-BN) with washable property and excellent mechanical stability is developed by combining the excellent scattering efficiency of the hexagonal boron nitride (h-BN) nanoplates with the high infrared emissivity and ideal triboelectric negative property of the Ecoflex matrix. Strikingly, sufficiently high solar reflectance (0.92) and ideal emissivity (0.97) endow the Ecoflex@h-BN film with subambient cooling effect of ≈9.5 °C at midday during the continuous outdoor measurements. In addition, the PDRC Ecoflex@h-BN film-based triboelectric nanogenerator (PDRC-TENG) exhibits a maximum peak power density of 0.5 W m-2 . By reasonable structure design, the PDRC-TENG accomplishes effective wind energy harvesting and can successfully drive the electronic device. Meanwhile, an on-skin PDRC-TENG is fabricated to harvest human motion energy and monitor moving states. This research provides a novel design of a multifunctional PDRC photonic film, and offers a versatile strategy to realize concurrent PDRC and sustainable energies harvesting.

A Novel Multifunctional Photonic Film for Colored Passive Daytime Radiative Cooling and Energy Harvesting.

Passive daytime radiative cooling (PDRC) materials with sustainable energy harvesting capability is critical to concurrently reduce traditional cooling energy utilized for thermal comfort and transfer natural clean energies into electricity. Herein, a versatile photonic film (Ecoflex@BTO@UAFL) based on a novel fluorescent luminescence color passive radiative cooling with triboelectric and piezoelectric effect is developed by filling the dielectric BaTiO3 (BTO) nanoparticles and ultraviolet absorption fluorescent luminescence (UAFL) powder into the elastic Ecoflex matrix. Test results demonstrate that the Ecoflex@BTO@UAFL photonic film exhibits a maximum passive radiative cooling effect of ∽10.1 °C in the daytime. Meanwhile, its average temperature drop in the daytime is ~4.48 °C, which is 0.91 °C higher than that of the Ecoflex@BTO photonic film (3.56 °C) due to the addition of UAFL material. Owing to the high dielectric constant and piezoelectric effect of BTO nanoparticles, the maximum power density (0.53 W m-2, 1 Hz @ 10 N) of the Ecoflex@BTO photonic film-based hybrid nanogenerator is promoted by 70.9% compared to the Ecoflex film-based TENG. This work provides an ingenious strategy for combining PDRC effects with triboelectric and piezoelectric properties, which can spontaneously achieve thermal comfort and energy conservation, offering a new insight into multifunctional energy saving.

Synergistic Effect of Electron Scattering and Space Charge Transfer Enabled Unprecedented Room Temperature NO2 Sensing Response of SnO2.

Metal oxide gas sensors have long faced the challenge of low response and poor selectivity, especially at room temperature (RT). Herein, a synergistic effect of electron scattering and space charge transfer is proposed to comprehensively improve gas sensing performance of n-type metal oxides toward oxidizing NO2 (electron acceptor) at RT. To this end, the porous SnO2 nanoparticles (NPs) assembled from grains of about 4 nm with rich oxygen vacancies are developed through an acetylacetone-assisted solvent evaporation approach combined with precise N2 and air calcinations. The results show that the as-fabricated porous SnO2 NPs sensor exhibits an unprecedented NO2 -sensing performance, including outstanding response (Rg /Ra  = 772.33 @ 5 ppm), fast recovery (<2 s), an extremely low detection limit (10 ppb), and exceptional selectivity (response ratio >30) at RT. Theoretical calculation and experimental tests confirm that the excellent NO2 sensing performance is mainly attributed to the unique synergistic effect of electron scattering and space charge transfer. This work proposes a useful strategy for developing high-performance RT NO2 sensors using metal oxides, and provides an in-depth understanding for the basic characteristics of the synergistic effect on gas sensing, paving the way for efficient and low power consumption gas detection at RT.

Facile depositing strategy to fabricate a hetero-affinity hybrid film for improving gas-sensing performance.

A novel co-spray method was proposed to fabricate a reduced graphene oxide (rGO)-poly (3-hexylthiophene) (P3HT) hybrid sensing device utilizing immiscible solution for ammonia detection at room temperature. The spectrum and Scanning Electron Microscopy (SEM) results revealed uniformly crimped morphology and favorable π-π interaction for the hybrid film. The hybrid film-based sensor showed obviously enhanced ammonia sensing performance, such as increased response, reduced response time, and reinforced sensitivity, in comparison to bare rGO, P3HT, and traditional rGO/P3HT layered film-based sensors, which could be attributed to an adsorption energy barrier and the p-n heterojunction effect. The synergetic strengthened sensing mechanism is discussed. Meanwhile, recovery ratio was introduced to evaluate the abnormal baseline drift induced high-response behavior. The excellent sensing properties of the hybrid sensor indicate that the co-spray method could be an alternative process for the preparation of hetero-affinity hybrid films or functional devices.

Constructing Electrically and Mechanically Self-Healing Elastomers by Hydrogen Bonded Intermolecular Network.

One key limitation of artificial skin-like materials is the shortened service life caused by mechanical damages during practical applications. The ability to self-heal can effectively extend the material service life, reduce the maintenance cost, and ensure safety. Therefore, it is important and necessary to fabricate materials with simultaneously mechanical and electrical self-healing behavior in a facile and convenient way. Herein, we report a stretchable and conductive self-healing elastomer based on intermolecular networks between poly(acrylic acid) (PAA) and reduced graphene oxide (rGO) through a facile and convenient postreduction and one-pot method. The introduction of rGO provides the PAA-GO elastomers with good mechanical stability and electrical properties. Moreover, this material exhibited both electrical and mechanical self-healing properties. After cutting, the elastomers self-healed quickly (∼30 s) and efficiently (∼95%) at room temperature. The elastomers were accurate and reliable in detecting external strain even after healing. The elastomers were further applied for strain sensors, which were attached directly to human skin to monitor external movements, including finger bending and wrist twisting.

Facile and low-cost fabrication of a humidity sensor using naturally available sepiolite nanofibers.

Much effort has focussed on enhancing the humidity-sensing performances of humidity sensors, but their fabrication using facile and low-cost methods is also desirable. In this work, a humidity sensor based on a naturally available nanomaterial, sepiolite nanofibers (SNFs), was facilely fabricated without any expensive raw materials or complex processes. Characterization results show that SNFs have a natural slender nanofiber structure (diameter 20-50 nm) and abundant hydrophilic functional groups (-OH). The results of humidity-sensing tests show that the SNF humidity sensor has outstanding humidity-sensing properties (i.e. large response, good linearity and repeatability) within the relative humidity range from 10.9% to 91.5% at room temperature (25 °C). This work presents a moderate and cost-effective strategy for the fabrication of high-performance humidity sensors using the natural SNF nanomaterial.

UV Illumination-Enhanced Molecular Ammonia Detection Based On a Ternary-Reduced Graphene Oxide-Titanium Dioxide-Au Composite Film at Room Temperature.

In this work, we report on UV illumination-enhanced room-temperature trace NH3 detection based on ternary composites of reduced graphene oxide nanosheets (rGO), titanium dioxide nanoparticles (TiO2), and Au nanoparticles as the sensing layer, which is the first reported so far. The effect of the UV state as well as componential combination and content on the sensing behavior disclosed that rGO nanosheets served not only as a template to attach TiO2 and Au but also as an effective electron collector and transporter, TiO2 nanoparticles acted as a dual UV and NH3 sensitive material, and Au nanoparticles could increase the sorption sites and promote charge separation of photoinduced electron-hole pairs. The as-prepared rGO/TiO2/Au sensors were endowed with a sensing response of 8.9% toward 2 ppm of NH3, a sensitivity of 1.43 × 10-2/ppm within the investigated range, nice selectivity, robust operation repeatability, and stability, which was fairly competitive in comparison with previous work. Meanwhile, the experimental results provided clear evidence of inspiring UV-enhanced gas detection catering for the future demand of low power-consumption and high sensitivity.

A New Model and Its Application for the Dynamic Response of RGO Resistive Gas Sensor.

An reduced graphene oxide (RGO) resistive gas sensor was prepared to detect ammonia at room temperature, the result indicated that the desorption of gas (NH 3 ) molecules from a graphene-based sensor was difficult, which lead to a baseline drift. The responses of different concentrations were compared and studied. It was found that both the response rate and its acceleration were affected by the gas concentration. An Intermolecular Forces Based Model was established to explain the adsorption and desorption dynamic response curves. A new method was proposed based on this model. The first and second derivative extrema (FSDE) of the response curve can be attained quickly to calibrate the gas concentrations. The experiment results demonstrated that this new method could eliminate the baseline drift and was capable of increasing the efficiency of gas calibration significantly.

Temperature-programmed multicapillary gas chromatograph microcolumn for the analysis of odorous sulfur pollutants.

We report the fabrication and performance of a silicon-on-glass micro gas chromatography eight-capillary column based on microelectromechanical systems technology that is 50 cm long, 30 µm wide, and 300 µm deep. According to the theory of a gas chromatography column, an even gas flow among different capillaries play a vital role in the peak broadening. Thus, a flow splitter structure is designed by the finite element method through the comparison of the velocity distributions of the eight-capillary columns with and without splitter as well as an open tubular column. The simulation results reveal that eight-capillary column with flow splitters can receive more uniform flow velocity in different capillaries, hence decreases the peak broadening and in turn increases the separation efficiency. The separation experiment results show that the separation efficiency of about 22 000 plates/m is achieved with the chip column temperature programmed for analysis of odorous sulfur pollutants. This figure is nearly two times higher than that of the commercial capillary column coated the similar stationary phase. And the separation time of all the components in the microcolumn is less than 3.8 min, which is faster than the commercial capillary column.

A Simple Graphene NH3 Gas Sensor via Laser Direct Writing.

Ammonia gas sensors are very essential in many industries and everyday life. However, their complicated fabrication process, severe environmental fabrication requirements and desorption of residual ammonia molecules result in high cost and hinder their market acceptance. Here, laser direct writing is used to fabricate three parallel porous 3D graphene lines on a polyimide (PI) tape to simply construct an ammonia gas sensor. The middle one works as an ammonia sensing element and the other two on both sides work as heaters to improve the desorption performance of the sensing element to ammonia gas molecules. The graphene lines were characterized by scanning electron microscopy and Raman spectroscopy. The response and recovery time of the sensor without heating are 214 s and 222 s with a sensitivity of 0.087% ppm-1 for sensing 75 ppm ammonia gas, respectively. The experimental results prove that under the optimized heating temperature of about 70 °C the heaters successfully help implement complete desorption of residual NH3 showing a good sensitivity and cyclic stability.

The enhanced formaldehyde-sensing properties of P3HT-ZnO hybrid thin film OTFT sensor and further insight into its stability.

A thin-film transistor (TFT) having an organic-inorganic hybrid thin film combines the advantage of TFT sensors and the enhanced sensing performance of hybrid materials. In this work, poly(3-hexylthiophene) (P3HT)-zinc oxide (ZnO) nanoparticles' hybrid thin film was fabricated by a spraying process as the active layer of TFT for the employment of a room temperature operated formaldehyde (HCHO) gas sensor. The effects of ZnO nanoparticles on morphological and compositional features, electronic and HCHO-sensing properties of P3HT-ZnO thin film were systematically investigated. The results showed that P3HT-ZnO hybrid thin film sensor exhibited considerable improvement of sensing response (more than two times) and reversibility compared to the pristine P3HT film sensor. An accumulation p-n heterojunction mechanism model was developed to understand the mechanism of enhanced sensing properties by incorporation of ZnO nanoparticles. X-ray photoelectron spectroscope (XPS) and atomic force microscopy (AFM) characterizations were used to investigate the stability of the sensor in-depth, which reveals the performance deterioration was due to the changes of element composition and the chemical state of hybrid thin film surface induced by light and oxygen. Our study demonstrated that P3HT-ZnO hybrid thin film TFT sensor is beneficial in the advancement of novel room temperature HCHO sensing technology.

Near-Infrared Organic Photodetectors with Spectral Response over 1200 nm Adopting a Thieno[3,4-c]thiadiazole-Based Acceptor.

The nonclassical ten-pi-electron 5,5-fused thieno[3,4-c]thiadiazole (TTD) unit is an excellent building block for constructing sub-silicon-band gap organic semiconductors. However, no small molecule acceptor (SMA) materials based on TTD have been reported despite the fact that high-sensitivity near-infrared organic photodetectors (OPDs) are generally achieved by using SMAs. In this work, we report a TTD-based narrow band gap (0.95 eV) SMA material TTD(DTC-2FIC)2 with strong near-infrared absorption. Employing PTB7-Th as a donor, OPDs based on TTD(DTC-2FIC)2 exhibit an optimized responsivity of 0.095 (±0.007) A W-1 at 1100 nm and sustain a decent responsivity of 0.074 (±0.008) A W-1 at 1200 nm. Moreover, a good specific detectivity over 1 × 1011 Jones is achieved at a wavelength of 1200 nm. Detailed characterizations imply that the performance of TTD(DTC-2FIC)2-based OPDs may be substantially improved by choosing lower-mixing donors with shallower energy levels. This work demonstrates that SMAs incorporating TTD as the core unit hold promise for constructing high-sensitivity sub-silicon-band gap OPDs.

Stabilizing Non-Fullerene Organic Photodiodes through Interface Engineering Enabled by a Tin Ion-Chelated Polymer.

The recent emergence of non-fullerene acceptors (NFAs) has energized the field of organic photodiodes (OPDs) and made major breakthroughs in their critical photoelectric characteristics. Yet, stabilizing inverted NF-OPDs remains challenging because of the intrinsic degradation induced by improper interfaces. Herein, a tin ion-chelated polyethyleneimine ethoxylated (denoted as PEIE-Sn) is proposed as a generic cathode interfacial layer (CIL) of NF-OPDs. The chelation between tin ions and nitrogen/oxygen atoms in PEIE-Sn contributes to the interface compatibility with efficient NFAs. The PEIE-Sn can effectively endow the devices with optimized cascade alignment and reduced interface defects. Consequently, the PEIE-Sn-OPD exhibits properties of anti-environmental interference, suppressed dark current, and accelerated interfacial electron extraction and transmission. As a result, the unencapsulated PEIE-Sn-OPD delivers high specific detection and fast response speed and shows only slight attenuation in photoelectric performance after exposure to air, light, and heat. Its superior performance outperforms the incumbent typical counterparts (ZnO, SnO2 , and PEIE as the CILs) from metrics of both stability and photoelectric characteristics. This finding suggests a promising strategy for stabilizing NF-OPDs by designing appropriate interface layers.

Sensing-transducing coupled piezoelectric textiles for self-powered humidity detection and wearable biomonitoring.

The performance of chemical sensors is dominated by the perception of the target molecules via sensitive materials and the conduction of sensing signals through transducers. However, sensing and transduction are spatially and temporally independent in most chemical sensors, which poses a challenge for device miniaturization and integration. Herein, we proposed a sensing-transducing coupled strategy by embedding the high piezoresponse Sm-PMN-PT ceramic (d33 = ∼1500 pC N-1) into a moisture-sensitive polyetherimide (PEI) polymer matrix via electrospinning to conjugate the humidity perception and signal transduction synchronously and sympatrically. Through phase-field simulation and experimental characterization, we reveal the principle of design of the composition and topological structure of sensing-transducing coupled piezoelectric (STP) textiles in order to modulate the recognition, conversion, and sensitive component utilization ratio of the prepared active humidity sensors, achieving high sensitivity (0.9%/RH%) and fast response (20 s) toward ambient moisture. The prepared STP textile can be worn on the human body to realize emotion recognition, exercise status monitoring, and physiological stress identification. This work offers unprecedented insights into the coupling mechanism between chemisorption-related interfacial state and energy conversion efficiency and opens up a new paradigm for developing autonomous, multifunctional and highly sensitive flexible chemical sensors.

Organic photodiodes with bias-switchable photomultiplication and photovoltaic modes.

The limited sensitivity of photovoltaic-type photodiodes makes it indispensable to use pre-amplifier circuits for effectively extracting electrical signals, especially when detecting dim light. Additionally, the photomultiplication photodiodes with light amplification function suffer from potential damages caused by high power consumption under strong light. In this work, by adopting the synergy strategy of thermal-induced interfacial structural traps and blocking layers, we develop a dual-mode visible-near infrared organic photodiode with bias-switchable photomultiplication and photovoltaic operating modes, exhibiting high specific detectivity (~1012 Jones) and fast response speed (0.05/3.03 ms for photomultiplication-mode; 8.64/11.14 µs for photovoltaic-mode). The device also delivers disparate external quantum efficiency in two optional operating modes, showing potential in simultaneously detecting dim and strong light ranging from ~10-9 to 10-1 W cm-2. The general strategy and working mechanism are validated in different organic layers. This work offers an attractive option to develop bias-switchable multi-mode organic photodetectors for various application scenarios.

Biodegradable cotton fiber-based piezoresistive textiles for wearable biomonitoring.

Electronic textiles are fundamentally changing the way we live. However, the inability to effectively recycle them is a considerable burden to the environment. In this study, we developed a cotton fiber-based piezoresistive textile (CF p-textile) for biomonitoring which is biocompatible, biodegradable, and environmentally friendly. These CF p-textiles were fabricated using a scalable dip-coating method to adhere MXene flakes to porous cotton cellulose fibers. The adhesion is made stronger by strong hydrogen bonding between MXene flakes and hierarchically porous cotton cellulose fibers. This cotton-fiber system provides a high sensitivity of 17.73 kPa-1 in a wide pressure range (100 Pa-30 kPa), a 2 Pa subtle pressure detection limit, fast response/recovery time (80/40 ms), and good cycle stability (over 5, 000 cycles). With its compelling sensing performance, the CF p-textile can detect various human biomechanical activities, including pulsation, muscle movement, and swallowing, while still being comfortable to wear. Moreover, the cotton cellulose is decomposed into low-molecular weight cellulose or glucose as a result of the 1,4-glycosidic bond breakage when exposed to acid or during natural degradation, which allows the electronic textile to be biodegradable. This work offers an ecologically-benign, cost-effective and facile approach to fabricating high-performance wearable bioelectronics.

Electronic/Optoelectronic Memory Device Enabled by Tellurium-based 2D van der Waals Heterostructure for in-Sensor Reservoir Computing at the Optical Communication Band.

Although 2D materials are widely explored for data storage and neuromorphic computing, the construction of 2D material-based memory devices with optoelectronic responsivity in the short-wave infrared (SWIR) region for in-sensor reservoir computing (RC) at the optical communication band still remains a big challenge. In this work, an electronic/optoelectronic memory device enabled by tellurium-based 2D van der Waals (vdW) heterostructure is reported, where the ferroelectric CuInP2 S6 and tellurium channel endow this device with both the long-term potentiation/depression by voltage pulses and short-term potentiation by 1550 nm laser pulses (a typical wavelength in the conventional fiber optical communication band). Leveraging the rich dynamics, a fully memristive in-sensor RC system that can simultaneously sense, decode, and learn messages transmitted by optical fibers is demonstrated. The reported 2D vdW heterostructure-based memory featuring both the long-term and short-term memory behaviors using electrical and optical pulses in SWIR region has not only complemented the wide spectrum of applications of 2D materials family in electronics/optoelectronics but also paves the way for future smart signal processing systems at the edge.

Designing Cu2+ as a Partial Substitution of Protons in Polyaniline Emeraldine Salt: Room-Temperature-Recoverable H2S Sensing Properties and Mechanism Study.

Hydrogen sulfide (H2S) sensors are in urgent demand in the field of hermetic environment detection and metabolic disease diagnosis. However, most of the reported room-temperature (RT) H2S sensors based on transition metal oxides/salts unavoidably suffer from the poisoning effect, resulting in the unrecoverable behavior to restrain their application. Herein, copper(II) chloride-doped polyaniline emeraldine salt (PANI-CuCl2) was devised for RT-recoverable H2S detection, where the copper ion (Cu2+) was designed as a partial substitution of protons (H+) in PANI. The prepared gas sensor exhibited full recovery capability toward 0.25-10 ppm H2S, good repeatability, and long-term stability under 80% RH. Meanwhile, the changes of the PANI-CuCl2 during the H2S sensing period were analyzed via multiple analytical methods to reveal the reversible sensing behavior. Results showed that doping of Cu2+ not only promoted the PANI's response through the formation of conductive copper sulfide (CuS) and following H+ redoping in the PANI but also facilitated the sensor's recovery behavior because of the Cu2+ regeneration under the H+/oxygen environment. This work not only proves the changes of the interaction between the PANI and Cu2+ during the H2S sensing period but also sheds light on designing recoverable H2S sensors based on transition metal salts.

Edge-enriched MoS2 nanosheets modified porous nanosheet-assembled hierarchical In2O3 microflowers for room temperature detection of NO2 with ultrahigh sensitivity and selectivity.

Nitrogen dioxide (NO2) is one of the most hazardous toxic pollutants to human health and the environment. However, deficiencies of low sensitivity and poor selectivity at room temperature (RT) restrain the application of NO2 sensors. Herein, the edge-enriched MoS2 nanosheets modified porous nanosheets-assembled three-dimensional (3D) In2O3 microflowers have been synthesized to improve the sensitivity and selectivity of NO2 detection at RT. The results show that the In2O3/MoS2 composite sensor exhibits a response as high as 343.09-5 ppm NO2, which is 309 and 72.5 times higher than the sensors based on the pristine MoS2 and In2O3. The composite sensor also shows short recovery time (37 s), excellent repeatability and long-term stability. Furthermore, the response of the In2O3/MoS2 sensor to NO2 is at least 30 times higher than that of other gases, proving the ultrahigh selectivity of the sensor. The outstanding sensing performance of the In2O3/MoS2 sensor can be attributed to the synergistic effect and abundant active sites originating from the p-n heterojunction, exposed edge structures and the designed 2D/3D hybrid structure. The strategy proposed herein is expected to provide a useful reference for the development of high-performance RT NO2 sensors.

Optimizing Piezoelectric Nanocomposites by High-Throughput Phase-Field Simulation and Machine Learning.

Piezoelectric nanocomposites with oxide fillers in a polymer matrix combine the merit of high piezoelectric response of the oxides and flexibility as well as biocompatibility of the polymers. Understanding the role of the choice of materials and the filler-matrix architecture is critical to achieving desired functionality of a composite towards applications in flexible electronics and energy harvest devices. Herein, a high-throughput phase-field simulation is conducted to systematically reveal the influence of morphology and spatial orientation of an oxide filler on the piezoelectric, mechanical, and dielectric properties of the piezoelectric nanocomposites. It is discovered that with a constant filler volume fraction, a composite composed of vertical pillars exhibits superior piezoelectric response and electromechanical coupling coefficient as compared to the other geometric configurations. An analytical regression is established from a linear regression-based machine learning model, which can be employed to predict the performance of nanocomposites filled with oxides with a given set of piezoelectric coefficient, dielectric permittivity, and stiffness. This work not only sheds light on the fundamental mechanism of piezoelectric nanocomposites, but also offers a promising material design strategy for developing high-performance polymer/inorganic oxide composite-based wearable electronics.