Direct Determination of Absolute Radical Quantum Yields in Hydroxyl and Sulfate Radical-Based Treatment Processes.

The absolute radical quantum yield (Φ) is a critical parameter to evaluate the efficiency of radical-based processes in engineered water treatment. However, measuring Φ is fraught with challenges, as current quantification methods lack selectivity, specificity, and anti-interference capabilities, resulting in significant error propagation. Herein, we report a direct and reliable time-resolved technique to determine Φ at pH 7.0 for commonly used radical precursors in advanced oxidation processes. For H2O2 and peroxydisulfate (PDS), the values of Φ•OH and ΦSO4•- at 266 nm were measured to be 1.10 ± 0.01 and 1.46 ± 0.05, respectively. For peroxymonosulfate (PMS), we developed a new approach to determine Φ•OHPMS with terephthalic acid as a trap-and-trigger probe in the nonsteady state system. For the first time, the Φ•OHPMS value was measured to be 0.56 by the direct method, which is stoichiometrically equal to ΦSO4•-PMS (0.57 ± 0.02). Additionally, radical formation mechanisms were elucidated by density functional theory (DFT) calculations. The theoretical results showed that the highest occupied molecular orbitals of the radical precursors are O-O antibonding orbitals, facilitating the destabilization of the peroxy bond for radical formation. Electronic structures of these precursors were compared, aiming to rationalize the tendency of the Φ values we observed. Overall, this time-resolved technique with specific probes can be used as a reliable tool to determine Φ, serving as a scientific basis for the accurate performance evaluation of diverse radical-based treatment processes.

Bifunctional Catalysts for Reversible Oxygen Evolution Reaction and Oxygen Reduction Reaction.

Metal-air batteries (MABs) and reversible fuel cells (RFCs) rely on the bifunctional oxygen catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Finding efficient bifunctional oxygen catalysts is the ultimate goal and it has attracted a great deal of attention. The dilemma is that a good ORR catalyst is not necessarily efficient for OER, and vice versa. Thus, the development of a new type of bifunctional oxygen catalysts should ensure that the catalysts exhibit high activity for both OER and ORR. Composites with multicomponents for active centers supported on highly conductive matrices could be able to meet the challenges and offering new opportunities. In this Review, the evolution of bifunctional catalysts is summarized and discussed aiming to deliver high-performance bifunctional catalysts with low overpotentials.

Spatial Distribution and Source of Inorganic Elements in PM2.5 During a Typical Winter Haze Episode in Guilin, China.

Guilin, a famous tourist city, is located in northeast Guangxi Province of Southwest China. However, recently, abnormal haze events occurred frequently in the winter. To characterize inorganic elements in PM2.5 and associated sources during a winter haze episode, 30 samples were collected from 6 sites in Guilin from December 16 to 20, 2016, and 24 inorganic elements were measured using an inductively coupled plasma mass spectrometer. The results showed that the sum of 24 inorganic elements varied from 5.47 ± 0.45 to 9.26 ± 0.73 µg m-3, and accounting for 6.81% ± 13.35% to 8.63% ± 15.05% of PM2.5 at all sites. Among them, crustal elements, including K, Ca, Na, Mg, Al, Fe, and Ti contributed approximately 82% ± 6%-90% ± 3%. Cluster results combined the coefficient of divergence and hierarchical cluster for inorganic elements and the sites showed that YS designated as the background site had obvious spatial heterogeneity, specially, mass concentration, and Igeo (index of geoaccumulation) values of Ni, Cr, Mo, and Ba were higher than those at the other five sites, which indicating that PM2.5 in Guilin was significantly affected by interregional transport. The results of source apportionment showed that Al, Ti, B, Fe, Ca, Mg, and Cr were derived from road and building dust, whereas Sb, As, and Hg originated from coal combustion, Co and V from vehicle emission (such as diesel and gasoline combustion), and other metals (Zn, Pb, Mn, Ba, Cu, Ni, Se, Cd, Mo, Tl, K, and Na) from coal combustion and industrial processes.

Spatial Distribution and Formation Mechanism of Water-soluble Inorganic Ions in PM2.5 During a Typical Winter Haze Episode in Guilin, China.

A 5-day PM2.5 sampling campaign was conducted during a typical haze episode from December 16 to 20, 2016, at five urban sites and one background site in Guilin, a famous tourist city in Southern China. A total of 30 PM2.5 samples were collected, and water-soluble inorganic ions (WSII) (SO42-, NO3-, NH4+, Ca2+, K+, Cl-, Na+, and Mg2+) were determined using ion chromatography. Correlation analysis, principal component analysis, and coefficient of divergence were applied to identify the formation mechanisms of secondary inorganic ions, potential sources, and spatial distribution of WSII. The average mass concentrations of PM2.5 at each sampling site were 71.6-127.85 µg m-3, which were more than the National Ambient Air Quality Standard (GB3095-2012, GradeII (35 µg m-3)) in China. SO42- NO3-, and NH4+ were the major WSII, accounting for 34.43-40.59% of PM2.5 mass. NO3-/SO42- ratio revealed that stationary sources-induced PM2.5 was still remarkable. Cl-/Na+ ratio and their strong correlation (r = 0.824) indicated that atmospheric transport from outside urban region played an effective role during the haze episode. Spatial variations of WSII are not pronounced at five urban sites except the background site. High relative humidity and O3 contributed to evidently influence the transformation of SO2 to SO42- but not obvious to NOx oxidation. Finally, the major sources of WSII are identified as the mixture of sea salt, coal combustion, biomass burning, vehicle exhaust and agricultural emissions (66.892%), and fugitive sources (19.7%).

Performance, microbial community and inhibition kinetics of long-term Cu2+ stress on an air-lift nitritation reactor with self-recirculation.

Biological nitrogen removal process could be affected due to the presence of heavy metals owing to their toxicity and accumulation in the sludge. In this study, the impact of Cu2+ shock on a long-term nitritation operation was investigated in an air-lift reactor with self-recirculation. Both the dynamics of microbial community and inhibition kinetics under Cu2+ stress were ascertained. The results showed that Cu2+ exerted severe inhibition on nitritation performance of an air-lift reactor (ALR) at 25 mg/L. The corresponding NH4+-N removal efficiency decreased to below 50%, which was mainly due to the variation of microbial community structure, especially the inhibition of nitrifiers like Nitrosomonas (the relative abundance decreased from 30% to 1% after Cu2+ inhibition). Kinetic parameters were obtained and compared after fitting the Haldane model. The long-term Cu2+ stress on the ALR aggravated the ammonium affinity and the resistance to substrate self-inhibition of the nitritation sludge, but reduced the resistance to Cu2+ inhibition. Furthermore, Cu2+ acted as uncompetitive inhibitor on nitritation process. Our results provide new insights into the nitritation characteristics under long-term Cu2+ stress.

Mechanistic Study on the Role of Soluble Microbial Products in Sulfate Radical-Mediated Degradation of Pharmaceuticals.

The role of soluble microbial products (SMP), the most important component of effluent organic matter from municipal wastewater treatment plants, in sulfate radical (SO4•-)-based advanced oxidation technologies (AOTs) remains substantially unclear. In this study, we first utilized a suite of macro- and microanalytical techniques to characterize the SMP from a membrane bioreactor for its fundamental molecular, spectroscopic, and reactivity properties. The degradation kinetics of three representative pharmaceuticals (i.e., naproxen, gemfibrozil, and sulfadiazine) in the presence of SMP was significantly reduced as compared to in its absence. Possible mechanisms for the interference by SMP in degrading these target compounds (TCs) were investigated. The low percentage of bound TCs to SMP ruled out the cage effect. The measurement of steady-state 1O2 concentration indicated that formation of 1O2 upon UV irradiation on SMP was not primarily responsible for the degradation of TCs. However, the comparative and quenching results reveal that SMP absorbs UV light acting as an inner filter toward the TCs, and meanwhile scavenges SO4•- with a high second-order rate constant of 2.48 × 108 MC-1 s-1.

Discerning three novel chromate reduce and transport genes of highly efficient Pannonibacter phragmitetus BB: From genome to gene and protein.

Here, Pannonibacter phragmitetus BB was investigated at genomic, genetic and protein levels to explore molecular mechanisms of chromium biotransformation, respectively. The results of Miseq sequencing uncovered that a high-qualified bacterial genome draft was achieved with 5.07 Mb in length. Three novel genes involved in chromate reduce and transport, named nitR, chrA1 and chrA2, were identified by alignment, annotation and phylogenetic tree analyses, which encode a chromate reductase (NitR) and two chromate transporters (ChrA1 and ChrA2). Reverse transcription real-time polymerase chain reaction (RT-qPCR) analyses showed that the relative quantitative transcription of the three genes as the maximum reduction rate of Cr(VI) were significantly up-regulated with the increasing initial Cr(VI) concentrations. However, at the maximum cell growth points nitR was in a low transcription level, while the transcription of chrA1 and chrA2 were hold at a relatively high level and decreased with the increasing initial Cr(VI) concentrations. The ex-situ chromate reducing activity of NitR was revealed a Vmax of 34.46 µmol/min/mg enzyme and Km of 14.55 µmol/L, suggesting feasibility of the reaction with Cr(VI) as substrate. The multiple alignment demonstrates that NitR is potentially a nicotinamide adenine dinucleotide phosphate (NADPH) dependent flavin mononucleotide (FMN) reductase of Class I chromate reductases. Our results will prompt a large-scaled bioremediation on the contaminated soils and water by Pannonibacter phragmitetus BB, taking advantage of uncovering its molecular mechanisms of chromium biotransformation.

Short-term effects of nanoscale Zero-Valent Iron (nZVI) and hydraulic shock during high-rate anammox wastewater treatment.

The stability and resilience of an anaerobic ammonium oxidation (anammox) system under transient nanoscale Zero-Valent Iron (nZVI) (50, 75 and 100 mg L-1), hydraulic shock (2-fold increase in flow rate) and their combination were studied in an up-flow anaerobic sludge blanket reactor. The response to the shock loads can be divided into three phases i.e. shock, inertial and recovery periods. The effects of the shock loads were directly proportional to the shock intensity. The effluent quality was gradually deteriorated after exposure to high nZVI level (100 mg L-1) for 2 h. The higher effluent sensitivity index and response caused by unit intensity of shock was observed under hydraulic and combined shocks. Notably, the specific anammox activity and the content of heme c were considerably reduced during the shock phase and the maximum loss rates were about 30.5% and 24.8%, respectively. Nevertheless, the extracellular polymeric substance amount in the shock phase was enhanced in varying degrees and variation tendency was disparate at all the tested shock loads. These results suggested that robustness of the anammox system was dependent on the magnitude shocks applied and the reactor resistance can be improved by reducing hydraulic retention time with the increase of nZVI concentration under these circumstances.

Comparison of the degradation of molecular and ionic ibuprofen in a UV/H2O2 system.

The advanced oxidation technologies based on •OH can effectively degrade the pharmaceutical and personal care products under operating conditions of normal temperature and pressure. In this study, direct photolysis of ibuprofen (IBU) is slow due to the relatively low molar extinction coefficient and quantum yield. Compared to direct photolysis, the degradation kinetics of IBU was significantly enhanced in the UV/H2O2 system, mainly by •OH radical mediated oxidation. In the UV/H2O2 system, the degradation rate of ionic IBU was slightly faster than that of the molecular form. Kinetic analysis showed that the second-order reaction rate constant of ionic IBU (5.51 × 109 M-1 s-1) was higher than that of the molecular form (3.43 × 109 M-1 s-1). The pseudo first-order rate constant for IBU degradation (kobs) increased with increasing H2O2 dosage. kobs can be significantly decreased in the presence of natural organic matter (NOM), which is due to (i) NOM radical scavenging effects (dominant role) and (ii) UV absorption. The degradation of IBU was inhibited by HCO3-, which was attributed to its scavenging effect. Interestingly, when NO3- was present in aqueous solution, a slight increase in the degradation rate was observed, which was due to NO3- absorbing photons to generate •OH at a low quantum yield. No obvious effects were observed when SO42 and Cl- were present.

Subcellular distribution and chemical forms of antimony in Ficus tikoua.

Ficus tikoua (F. tikoua) was a potential species for antimony (Sb) phytoremediation due to its wide growth in the mining area. However, little was known about its tolerance mechanisms toward Sb. The determination of the distribution and chemical speciation of Sb in F. tikoua is essential for understanding the mechanisms involved in Sb accumulation, transportation, and detoxification. The present study investigated the subcellular distribution and chemical forms of Sb in F. tikoua. The plant was exposed to different Sb concentrations (0, 30, 90, and 180 µmol/L) for 30 days. The results showed that F. tikoua possessed a marked ability to tolerate and accumulate Sb. The proportional Sb increased with increasing Sb concentration in the solution, and the highest Sb concentration occurred in roots (1274.5-1580.9 mg/kg), followed by stems (133.5-498.9 mg/kg) and leaves (4.1-15.7 mg/kg). In the subcellular sequestration of Sb in F. tikoua, the largest accumulation of Sb occurred in cell walls (72.4-87.5%) followed by cytoplasmic organelles (8.2-18.6%) and cytoplasmic supernatant. The results suggested that cell walls act as important protective barriers against Sb toxicity in F. tikoua. Although Sb in all plant tissues found primarily in the fractions extracted by ethanol and distilled water, the current study found that the Sb amounts in the HAc-extractable fraction, HCl-extractable fraction, and residue fraction increased at the highest Sb level (180 µmol/L) compared to that under lower Sb levels. These results indicate that excessive Sb accumulated in F. tikoua under Sb stress is bound to non-dissolved or low-bioavailable compounds, a biochemical mechanism that benefits F. tikoua because it helps alleviate Sb toxicity.

Study on the mechanism of copper-ammonia complex decomposition in struvite formation process and enhanced ammonia and copper removal.

Heavy metals and ammonia are difficult to remove from wastewater, as they easily combine into refractory complexes. The struvite formation method (SFM) was applied for the complex decomposition and simultaneous removal of heavy metal and ammonia. The results indicated that ammonia deprivation by SFM was the key factor leading to the decomposition of the copper-ammonia complex ion. Ammonia was separated from solution as crystalline struvite, and the copper mainly co-precipitated as copper hydroxide together with struvite. Hydrogen bonding and electrostatic attraction were considered to be the main surface interactions between struvite and copper hydroxide. Hydrogen bonding was concluded to be the key factor leading to the co-precipitation. In addition, incorporation of copper ions into the struvite crystal also occurred during the treatment process.

Enhanced short-cut nitrification in an airlift reactor by CaCO3 attachment on biomass under high bicarbonate condition.

The short-cut nitrification (SCN) performance of an airlift reactor (ALR) was investigated under increasing bicarbonate condition. The sequential increase of bicarbonate from 2.5 to 7.0 g/L accelerated the nitrite accumulation and improved the NAP to 99 %. With the increase of bicarbonate dose to 11 g/L, the ammonium removal efficiency and the ammonium removal rate (ARR) were improved to 95.1 % and 0.57 kg/m(3)/day, respectively. However, the elevation of bicarbonate concentration from 11.0 to 14.0 g/L gradually depreciated the nitrite accumulation percentage to 62.5 %. Then, the reactor was operated in increasing ammonium strategy to increase the nitrogen loading rate (NLR) to 1.1 kg/m(3)/day under 700 mg/L influent ammonium concentration. The ARR and nitrite production rate were elevated to 1.1 and 0.9 kg/m(3)/day, respectively. The SCN performance was improved to 1.8 kg/m(3)/day (NLR) by the subsequent progressive shortening of HRT to 4.8 h at ammonium concentration of 350 mg/L, which was 1.6 times higher than that of the increasing ammonium strategy. Chemical analysis with EDS, FTIR and XRD confirmed the presence of CaCO3 precipitates on biomass surface during the long-term operation under high bicarbonate conditions. The attachment of precipitates to the SCN sludge helped to improve the biomass settleability and finally enhanced the SCN performance of the ALR.

Co-treatment of gypsum sludge and Pb/Zn smelting slag for the solidification of sludge containing arsenic and heavy metals.

Wastewater treatment sludge from a primary lead-zinc smelter is characterized as hazardous waste and requires treatment prior to disposal due to its significant arsenic and heavy metals contents. This study presents a method for the stabilization of arsenic sludge that uses a slag based curing agent composed of smelting slag, cement clinker and limestone. The Unconfined Compressive Strength (UCS) test, the China Standard Leaching Test (CSLT), and the Toxicity Characteristic Leaching Procedures (TCLP) were used to physically and chemically characterize the solidified sludge. The binder ratio was determined according to the UCS and optimal experiments, and the optimal mass ratio of m (smelting slag): m (cement clinker): m (gypsum sludge): m (limestone) was 70:13:12:5. When the binder was mixed with arsenic sludge using a mass ratio of 1:1 and then maintained at 25 °C for 28 d, the UCS reached 9.30 MPa. The results indicated that the leached arsenic content was always less than 5 mg/L, which is a safe level, and does not contribute to recontamination of the environment. The arsenic sludge from the Zn/Pb metallurgy plant can be blended with cement clinker and smelting slag materials for manufacturing bricks and can be recycled as construction materials.

Chlorophyll Fluorescence in Leaves of Ficus tikoua Under Arsenic Stress.

A greenhouse culture experiment was used to quantify effects of arsenic (As) stress on the growth and photochemical efficiency of Ficus tikoua (F. tikoua). Results showed growth of F. tikoua leaves was significantly inhibited at As concentrations higher than 80 µmol/L in solution. Root arsenic concentration was significantly higher than that in stem and leaf. The 320 and 480 µmol/L As concentrations in solution resulted in significant decreases in maximum quantum efficiency of photosystem II (PSII) (Fv/Fm), variable to initial chlorophyll fluorescence (Fv/Fo), and quantum yield of PSII electron transport (Y(II)) of F. tikoua leaves, whereas significantly higher non-photochemical quenching of fluorescence and photochemical quenching of fluorescence values were found at 160, 320 and 480 µmol/L As concentrations in solution, implying that PSII reaction centers were damaged at high As concentrations and that F. tikoua eliminates excess energy stress on the photochemical apparatus to adapt to As stress.

Synthesis of Core-Shell Magnetic Fe3O4@poly(m-Phenylenediamine) Particles for Chromium Reduction and Adsorption.

Magnetic Fe3O4@poly(m-phenylenediamine) particles (Fe3O4@PmPDs) with well-defined core-shell structure were first designed for high performance Cr(VI) removal by taking advantages of the easy separation property of magnetic nanoparticles (MNPs) and the satisfactory adsorption property of polymers. Through controlling the polymerization on MNPs, directly coating was realized without the complicated premodification procedures. The particle property and adsorption mechanism were analyzed in details. Fe3O4@PmPDs exhibited tunable PmPD shell thickness from 10 to 100 nm, high magnetic (∼150 to ∼73 emu g(-1)) and facile separation property by magnet. The coating of PmPD significantly enhanced Cr(VI) adsorption capacity from 46.79 (bare MNPs) to 246.09 mg g(-1) (71.55% PmPD loading proportion), much higher than many reported composite adsorbents. The high Cr(VI) removal performance was attributed to the adsorption of Cr(VI) on protonated imino groups and the efficient reduction of Cr(VI) to Cr(III) by amine, followed by Cr(III) chelated on imino groups, which are spontaneous and endothermic. The Fe3O4@PmPDs have great potential in treating Cr(VI)-contaminated water.

Depolymerization and decolorization of kraft lignin by bacterium Comamonas sp. B-9.

There is no commercial or industrial-scale process for the remediation of black liquor using microorganisms to date. One of the most important causes is that most microorganisms are not able to use lignin as their principal metabolic carbon or energy source. The bacterial strain Comamonas sp. B-9 has shown remarkable ability to degrade kraft lignin and decolorize black liquor using lignin as its principal metabolic carbon and energy source. This report looks at the depolymerization and decolorization of kraft lignin by Comamonas sp. B-9. The degradation, decolorization, and total carbon removal reached 45, 54, and 47.3%, respectively, after 7 days treatment. Comamonas sp. B-9 was capable of depolymerizing kraft lignin effectively as analyzed by gel permeation chromatography and decolorization via degrading benzene ring structures as shown using Fourier transform infrared spectroscopy analysis.

[Start-up and Recovery Performance of ANAMMOX Reactors Under Long-term Starvation].

The application of ANAMMOX technology is constrained by sluggish growth and difficulty in enriching ANAMMOX bacteria. Long-term starvation of functioning bacteria due to limited substrate supply makes the steady operation of ANAMMOX reactors more difficult. Re-examining the start-up and recovery performance of the ANAMMOX reactor and identifying its resistance mechanism are important from the standpoint of long-term starvation. By inoculating nitrifying and denitrifying sludge under various operating circumstances, the ANAMMOX reactors were successfully started. Under various start-up procedures, the tolerance mechanism and recovery performance were examined. The outcomes demonstrated that the denitrifying sludge-inoculated reactor operated steadily with a high substrate concentration and low flow rate. After 85 days of operation, the removal efficiencies of NH4+-N, NO2--N, and total nitrogen reached 98.7%, 99.3%, and 89.3%, respectively. After 144 days of starvation and 30 days of recovery, the better nitrogen removal performance was achieved at a low substrate concentration and high flow rate, and the removal efficiencies were 99.8% （NH4+-N）, 99.8% （NO2--N）, and 93.6% （total nitrogen）. During the starvation, extracellular polymeric substances wrapped the ANAMMOX bacteria and kept them intact to resist long-term starvation stress. The expression of nirS, hzsA, and hdh genes ensured the synthesis of nitrite/nitric oxide oxidoreductase, hydrazine synthase, and hydrazine dehydrogenase to maintain ANAMMOX activity. There was no significant difference in the relative abundance of ANAMMOX bacteria before and after starvation recovery. Candidatus Kuenenia had better anti-hunger ability, and the relative abundance increased by more than 86% after 30 days of recovery, confirming its tolerance to long-term starvation.

Characterization of the microplastic photoaging under the action of typical salt ions of biological nitrogen removal processes.

Microplastics (MPs) are one of the most prevalent and diverse contaminants, and wastewater treatment plants are significant MP aggregators. Controlling the pollution caused by microplastics requires an understanding of how they age. The properties of the MPs photoaging process under the influence of salt ions typical of biological nitrogen elimination processes were disclosed in this work. The aging process of polyvinyl chloride microplastics (PVC-MPs) was greatly slowed down by greater HCO3- and NO2- concentrations, according to a comparison of the carbonyl index changes that occurred during photoaging. The carbonyl index had a negative correlation with the thermal stability of the photo-aged PVC-MPs, and aging accelerated the elimination of chlorine from the water. The samples were aged by UV radiation after 36 h at 40 °C, and the amount of chlorine eliminated was 10.13 times greater than that of the original MPs samples. It was discovered that the leachate concentration of aged MPs dramatically increased with decreasing particle size and was positively connected with the level of aging by comparing the concentration of leachate for two particle sizes (1 mm and 100 m). Photoaging caused MPs to become rougher, which in turn improved the NO3--N, NH4+-N, and NO2--N adsorption by PVC-MPs.

Simultaneously inhibit cadmium and arsenic uptake in rice (Oryza sativa L.) by Selenium enhanced iron plaque: Performance and mechanism.

Selenium (Se) fortification is witnessed to simultaneously inhibit absorbing Cadmium (Cd) and Arsenic (As) by rice plants, but the mechanism is unclear. Here, the effects of Se on the root morphology, iron plaque (IP) content, soil Fe2+ content, radial oxygen loss (ROL), and enzyme activities of the rice plants in the soil contaminated by Cd and As were intensively investigated through the hydroponic and soil experiments. Se effectively alleviated the toxic effects of Cd and As on the plants and the dry weight, root length, and root width were increased by 203.18%, 33.41%, and 52.81%, respectively. It also elucidated that ROL was one of the key factors to elevate IP formation by Se and the specific pathways of Se enhancing ROL were identified. ROL of the plants in the experiment group treated by Se was increased 36.76%, and correspondingly IP was magnified 50.37%, compared to the groups with Cd and As. It was owing to Se significantly increased the root porosity (62.11%), facilitating O2 transport to the roots. Additionally, Se enhanced the activities of catalase (CAT) and superoxide dismutase (SOD) to promote the catalytic degradation of ROS induced by Cd and As stress. It indirectly increased O2 release in the rhizosphere, which benefit to form more robust IP serve as stronger barrier to Cd and As. The results of our study provide a novel molecular level insight for Se promoting root IP to block Cd and As uptake by the rice plants.

Transformation of As and Cd associated with Fe-Mn-modified biochar during simultaneous remediation on the contaminated soil.

Here, Fe- and Mn-modified biochar (BC-Fe-Mn) was applied to simultaneously stabilize As and Cd in the contaminated soil. The removal efficiencies for NaHCO3-extractable As and DTPA-extractable Cd by BC-Fe-Mn were 60.8% and 49.6%, respectively. The speciation analyses showed that the transformation to low-crystallinity Fe-bound (F3) As, Fe-Mn oxide-bound (OX) of Cd, and residual As and Cd was primarily attributed to stabilizing the two metal(loid)s. Moreover, the correlation analyses showed that the increase of As in F3 fraction was significantly and positively associated with the increase of OX fraction Mn (r = 0.64). Similarly, OX fraction Cd was increased notably with increasing OX fraction Fe (r = 0.91) and OX fraction Mn (r = 0.76). In addition, a novel dialysis experiment was performed to separate the reacted BC-Fe-Mn from the soil for intensively investigating the stabilization mechanisms for As and Cd by BC-Fe-Mn. The characteristic crystalline compounds of (Fe0.67Mn0.33)OOH and Fe2O3 on the surface of BC-Fe-Mn were revealed by SEM-EDS and XRD. And FTIR analyses showed that α-FeOOH, R-COOFe/Mn+, and O-H on BC-Fe-Mn potentially served as the reaction sites for As and Cd. A crystalline compound of MnAsO4 was found in the soil treated by BC-Fe-Mn in the dialysis experiment. Thus, our results are beneficial to deeper understand the mechanisms of simultaneous stabilization of As and Cd by BC-Fe-Mn in soil and support the application of the materials on a large scale.