RESUMEN
Na5YSi4O12 (NYSO) is demonstrated as a promising electrolyte with high ionic conductivity and low activation energy for practical use in solid Na-ion batteries. Solid-state NMR was employed to identify the six types of coordination of Na+ ions and migration pathway, which is vital to master working mechanism and enhance performance. The assignment of each sodium site is clearly determined from high-quality 23Na NMR spectra by the aid of Density Functional Theory calculation. Well-resolved 23Na exchangespectroscopy and electrochemical tracer exchange spectra provide the first experimental evidence to show the existence of ionic exchange between sodium at Na5 and Na6 sites, revealing that Na transport route is possibly along three-dimensional chain of open channel-Na4-open channel. Variable-temperature NMR relaxometry is developed to evaluate Na jump rates and self-diffusion coefficient to probe the sodium-ion dynamics in NYSO. Furthermore, NYSO works well as a dual ion conductor in Na and Li metal batteries with Na3V2(PO4)3 and LiFePO4 as cathodes, respectively.
RESUMEN
Incipient ferroelectrics have emerged as an attractive class of functional materials owing to their potential to be engineered for exotic ferroelectric behavior, holding great promise for expanding the ferroelectric family. However, thus far, their artificially engineered ferroelectricity has fallen far short of rivaling classic ferroelectrics. In this study, we address this challenge by developing a superfine nanodomain engineering strategy. By applying this approach to representative incipient ferroelectric of SrTiO3-based films, we achieve unprecedentedly strong ferroelectricity, not only surpassing previous records for incipient ferroelectrics but also being comparable to classic ferroelectrics. The remanent polarization of the thin film reaches up to 17.0 µC cm-2 with an ultrahigh Curie temperature of 973 K. Atomic-scale investigations elucidate the origin of this robust ferroelectricity in the emergent high-density superfine nanodomains spanning merely 3-10 unit cells. Combining experimental results with theoretical assessments, we unveil the underlying mechanism, where the intentionally introduced diluted foreign Fe element creates a deeper Landau energy well and promotes a short-range ordering of polarization. Our developed strategy significantly streamlines the design of unconventional ferroelectrics, providing a versatile pathway for exploring new and superior ferroelectric materials.
RESUMEN
Dielectric ceramic capacitors with high recoverable energy density (Wrec) and efficiency (η) are of great significance in advanced electronic devices. However, it remains a challenge to achieve high Wrec and η parameters simultaneously. Herein, based on density functional theory calculations and local structure analysis, the feasibility of developing the aforementioned capacitors is demonstrated by considering Bi0.25Na0.25Ba0.5TiO3 (BNT-50BT) as a matrix material with large local polarization and structural distortion. Remarkable Wrec and η of 16.21 J/cm3 and 90.5% have been achieved in Bi0.25Na0.25Ba0.5Ti0.92Hf0.08O3 via simple chemical modification, which is the highest Wrec value among reported bulk ceramics with η greater than 90%. The examination results of local structures at lattice and atomic scales indicate that the disorderly polarization distribution and small nanoregion (â¼3 nm) lead to low hysteresis and high efficiency. In turn, the drastic increase in local polarization activated via the ultrahigh electric field (80 kV/mm) leads to large polarization and superior energy storage density. Therefore, this study emphasizes that chemical design should be established on a clear understanding of the performance-related local structure to enable a targeted regulation of high-performance systems.
RESUMEN
Mixed-anion-group Fe-based phosphate materials, such as Na4 Fe3 (PO4 )2 P2 O7 , have emerged as promising cathode materials for sodium-ion batteries (SIBs). However, the synthesis of pure-phase material has remained a challenge, and the phase evolution during sodium (de)intercalation is debating as well. Herein, a solid-solution strategy is proposed to partition Na4 Fe3 (PO4 )2 P2 O7 into 2NaFePO4 â Na2 FeP2 O7 from the angle of molecular composition. Via regulating the starting ratio of NaFePO4 and Na2 FeP2 O7 during the synthesis process, the nonstoichiometric pure-phase material could be successfully synthesized within a narrow NaFePO4 content between 1.6 and 1.2. Furthermore, the proposed synthesis strategy demonstrates strong applicability that helps to address the impurity issue of Na4 Co3 (PO4 )2 P2 O7 and nonstoichiometric Na3.4 Co2.4 (PO4 )1.4 P2 O7 are evidenced to be the pure phase. The model Na3.4 Fe2.4 (PO4 )1.4 P2 O7 cathode (the content of NaFePO4 equalsâ 1.4) demonstrates exceptional sodium storage performances, including ultrahigh rate capability under 100â C and ultralong cycle life over 14000 cycles. Furthermore, combined measurements of ex situ nuclear magnetic resonance, in situ synchrotron radiation diffraction and X-ray absorption spectroscopy clearly reveal a two-phase transition during Na+ extraction/insertion, which provides a new insight into the ionic storage process for such kind of mixed-anion-group Fe-based phosphate materials and pave the way for the development of high-power sodium-ion batteries.
RESUMEN
Anionic redox chemistry can surpass theoretical limits of conventional layered oxide cathodes in energy density. A recent model system of sodium-ion batteries, O3-NaLi1/3Mn2/3O2, demonstrated full anionic redox capacity but is limited in reversibility and kinetics due to irreversible structural rearrangement and oxygen loss. Solutions to these issues are missing due to the challenging synthesis. Here, we harness the unique structural richness of sodium layered oxides and realize a controlled ratio of P2 structural intergrowth in this model compound with the overall composition maintained. The resulted O3 with 27% P2 intergrowth structure delivers an excellent initial Coulombic efficiency of 87%, comparable to the state-of-the-art Li-rich NMCs. This improvement is attributed to the effective suppression of irreversible oxygen release and structural changes, evidenced by operando Differential Electrochemical Mass Spectroscopy and X-ray Diffraction. The as-prepared intergrowth material, based on the environmentally benign Mn, exhibits a reversible capacity of 226 mAh g-1 at C/20 rate with excellent cycling stability stemming from the redox reactions of oxygen and manganese. Our work isolates the role of P2 structural intergrowth and thereby introduces a novel strategy to enhance the reversibility and kinetics of anionic redox reactions in sodium layered cathodes without compromising capacity.
RESUMEN
Poly(ethylene oxide) has been widely investigated as a potential separator for solid-state lithium metal batteries. However, its applications were significantly restricted by low ionic conductivity and a narrow electrochemical stability window (<4.0 V vs Li/Li+) at room temperature. Herein, a novel molecular self-assembled ether-based polyrotaxane electrolyte was designed using different functional units and prepared by threading cyclic 18-crown ether-6 (18C6) to linear poly(ethylene glycol) (PEG) via intermolecular hydrogen bond and terminating with hexamethylene diisocyanate trimer (HDIt), which was strongly confirmed by local structure-sensitive solid/liquid-state nuclear magnetic resonance (NMR) techniques. The designed electrolyte has shown an obviously increased room-temperature ionic conductivity of 3.48 × 10-4 S cm-1 compared to 1.12 × 10-5 S cm-1 without assembling polyrotaxane functional units, contributing to the enhanced cycling stability of batteries with both LiFePO4 and LiNi0.8Co0.15Al0.05O2 cathode materials. This advanced molecular self-assembled strategy provides a new paradigm in designing solid polymer electrolytes with demanded performance for lithium metal batteries.
RESUMEN
Pressure-induced topochemical polymerization of molecular crystals with various stackings is a promising way to synthesize materials with different co-existing sub-structures. Here, by compressing the azobenzene crystal containing two kinds of intermolecular stacking, we synthesized an ordered van der Waals carbon nanoribbon (CNR) heterostructure in one step. Azobenzene polymerizes via a [4 + 2] hetero-Diels-Alder (HDA) reaction of phenylazo-phenyl in layer A and a para-polymerization reaction of phenyl in layer B at 18 GPa, as evidenced by in situ Raman and IR spectroscopies, X-ray diffraction, as well as gas chromatography-mass spectrometry and the solid-state nuclear magnetic resonance of the recovered products. The theoretical calculation shows that the obtained CNR heterostructure has a type II (staggered) band gap alignment. Our work highlights a high-pressure strategy to synthesize bulk CNR heterostructures.
RESUMEN
The rational design of novel high-performance cathode materials for sodium-ion batteries is a challenge for the development of the renewable energy sector. Here, a new sodium-deficient NASICON phosphate, namely Na3.40 â¡0.60 Co0.5 Fe0.5 V(PO4 )3 , demonstrating the excellent electrochemical performance is reported. The presence of Co allows a third Na+ to participate in the reaction thus exhibiting a high reversible capacity of ≈155 mAh g-1 in the voltage range of 2.0-4.0 V versus Na+ /Na with a reversible single-phase mechanism and a small volume shrinkage of ≈5.97% at 4.0 V. 23 Na solid-state nuclear magnetic resonance (NMR) combined with ex situ X-ray diffraction (XRD) refinements provide evidence for a preferential Na+ insertion within the Na2 site. Furthermore, the enhanced sodium kinetics ascribed to Co-substitution is also confirmed in combination with electrochemical impedance spectroscopy (EIS), galvanostatic intermittent titration technique (GITT), and theoretical calculation.
RESUMEN
Pressure-stabilized high-entropy sulfide (FeCoNiCuRu)S2 (HES) is proposed as an anode material for fast and long-term stable lithium/sodium storage performance (over 85% retention after 15 000 cycles @10 A g-1 ). Its superior electrochemical performance is strongly related to the increased electrical conductivity and slow diffusion characteristics of entropy-stabilized HES. The reversible conversion reaction mechanism, investigated by ex-situ XRD, XPS, TEM, and NMR, further confirms the stability of the host matrix of HES after the completion of the whole conversion process. A practical demonstration of assembled lithium/sodium capacitors also confirms the high energy/power density and long-term stability (retention of 92% over 15 000 cycles @5 A g-1 ) of this material. The findings point to a feasible high-pressure route to realize new high-entropy materials for optimized energy storage performance.
RESUMEN
2,5-Furandicarboxylic acid (FDCA) is one of the top-12 value-added chemicals from sugar. Besides the wide application in chemical industry, here we found that solid FDCA polymerized to form an atomic-scale ordered sp3-carbon nanothread (CNTh) upon compression. With the help of perfectly aligned π-π stacked molecules and strong intermolecular hydrogen bonds, crystalline poly-FDCA CNTh with uniform syn-configuration was obtained above 11 GPa, with the crystal structure determined by Rietveld refinement of the X-ray diffraction (XRD). The in situ XRD and theoretical simulation results show that the FDCA experienced continuous [4 + 2] Diels-Alder reactions along the stacking direction at the threshold C···C distance of â¼2.8 Å. Benefiting from the abundant carbonyl groups, the poly-FDCA shows a high specific capacity of 375 mAh g-1 as an anode material of a lithium battery with excellent Coulombic efficiency and rate performance. This is the first time a three-dimensional crystalline CNTh is obtained, and we demonstrated it is the hydrogen bonds that lead to the formation of the crystalline material with a unique configuration. It also provides a new method to move biomass compounds toward advanced functional carbon materials.
Asunto(s)
DiamanteRESUMEN
Ce3+-doped SrS phosphors with a charge-compensating Na+ addition were successfully synthesized via a solid-state reaction method, and the related X-ray diffraction patterns can be indexed to the rock-salt-like crystal structure of the Fm3Ì m space group. SrS:(Ce3+)x (0.005 ≤ x ≤ 0.05) and SrS:(Ce3+)0.01,(Na+)y (0.005 ≤ y ≤ 0.030) phosphors were excited by 430 nm UV-Vis light, targeted to the 5d1 â 4f1 transition of Ce3+. The composition-optimized SrS:(Ce3+)0.01, (Na+)0.015 phosphors showed an intense broad emission band at λ = 430-700 nm. The doping of Na+ was probed by solid-state nuclear magnetic resonance. The 430 nm pumped white light-emitting diode structure fabricated with a combination of SrS:(Ce3+)0.01,(Na+)0.015 and Sr2Si5N8:Eu2+ phosphors shows a color-rendering index (Ra) of 89.7. The proposed strategy provides new avenues for the design and realization of novel high color quality solid-state LEDs.
RESUMEN
Oxide ion conductors can be used as electrolytes in solid oxide fuel cells, a promising energy-conversion technology. Local structures around the defects in oxide ion conductors are key for understanding the defect stabilization and migration mechanisms. As the defect contents are generally low, it is rather difficult to characterize the defect structure and therefore elucidate how oxide ions migrate. Solid-state nuclear magnetic resonance (NMR) spectroscopy is a powerful technique for probing the local structures. However, the interpretation of NMR signals mainly based on the empirical knowledge could lead to unprecise local structures. There is still controversy regarding the defect structures in the apatite-type interstitial oxide ion conductors containing isolated tetrahedral units. Here, we combine the experimental solid-state 29Si NMR spectroscopy with theoretical density functional theory calculations to investigate the defect structures in La9.33+x(SiO4)6O2+1.5x apatites. The results indicate that the 29Si resonance signals on the high field side of the main peak corresponding to the Si atoms in the bulk structure are related to La vacancies and there is no steady-state SiO5 in the defect structures. This finding provides new atomic-level understanding to the stabilization and migration of interstitial oxide ions in silicate apatites, which could guide the design and discovery of new solid oxide fuel cell electrolyte materials.
RESUMEN
Solid-state topochemical polymerization (SSTP) is a promising method to construct functional crystalline polymeric materials, but in contrast to various reactions that happen in solution, only very limited types of SSTP reactions are reported. Diels-Alder (DA) and dehydro-DA (DDA) reactions are textbook reactions for preparing six-membered rings in solution but are scarcely seen in solid-state synthesis. Here, using multiple cutting-edge techniques, we demonstrate that the solid 1,4-diphenylbutadiyne (DPB) undergoes a DDA reaction under 10-20 GPa with the phenyl as the dienophile. The crystal structure at the critical pressure shows that this reaction is "distance-selected". The distance of 3.2 Å between the phenyl and the phenylethynyl facilitates the DDA reaction, while the distances for other DDA and 1,4-addition reactions are too large to allow the bonding. The obtained products are crystalline armchair graphitic nanoribbons, and hence our studies open a new route to construct the crystalline carbon materials with atomic-scale control.
RESUMEN
Conversion type materials, in particular metal fluorides, have emerged as attractive candidates for positive electrodes in next generation Li-ion batteries (LIBs). However, their practical use is being hindered by issues related to reversibility and large polarization. To minimize these issues, a few approaches enlisting the anionic network have been considered. We herein report the electrochemical properties of bismuth oxyborate Bi4B2O9 and show that this compound reacts with lithium via a conversion reaction leading to a sustained capacity of 140 mA h g-1 when cycled between 1.7 and 3.5 V vs. Li+/Li0 while having a surprisingly small polarization (â¼300 mV) in the presence of solely 5% in weight of a carbon additive. These observations are rationalized in terms of charge transfer kinetics via complementary XRD, HRTEM and NMR measurements. This finding demonstrates that borate based conversion type materials display rapid charge transfer with limited carbon additives, hence offering a new strategy to improve their overall cycling efficiency.
RESUMEN
In the search for new cathode materials for Li-ion batteries, borate (BO3(3-)) based compounds have gained much interest during the last two decades due to the low molecular weight of the borate polyanions which leads to active materials with increased theoretical capacities. In this context we herein report the electrochemical activity versus lithium and the ionic conductivity of a diborate or pyroborate B2O5(4-) based compound, Li6CuB4O10. By combining various electrochemical techniques with in situ X-ray diffraction, we show that this material can reversibly insert/deinsert limited amounts of lithium (â¼0.3 Li(+)) in a potential window ranging from 2.5 to 4.5 V vs. Li(+)/Li(0). We demonstrate, via electron paramagnetic resonance (EPR), that such an electrochemical activity centered near 4.25 V vs. Li(+)/Li(0) is associated with the Cu(3+)/Cu(2+) redox couple, confirmed by density functional theory (DFT) calculations. Another specificity of this compound lies in its different electrochemical behavior when cycled down to 1 V vs. Li(+)/Li(0) which leads to the extrusion of elemental copper via a conversion type reaction as deduced by transmission electron microscopy (TEM). Lastly, we probe the ionic conductivity by means of AC and DC impedance measurements as a function of temperature and show that Li6CuB4O10 undergoes a reversible structural transition around 350 °C, leading to a surprisingly high ionic conductivity of â¼1.4 mS cm(-1) at 500 °C.
RESUMEN
Polymer-ceramic composite electrolytes are emerging as a promising solution to deliver high ionic conductivity, optimal mechanical properties, and good safety for developing high-performance all-solid-state rechargeable batteries. Composite electrolytes have been prepared with cubic-phase Li7 La3 Zr2 O12 (LLZO) garnet and polyethylene oxide (PEO) and employed in symmetric lithium battery cells. By combining selective isotope labeling and high-resolution solid-state Li NMR, we are able to track Li ion pathways within LLZO-PEO composite electrolytes by monitoring the replacement of (7) Li in the composite electrolyte by (6) Li from the (6) Li metal electrodes during battery cycling. We have provided the first experimental evidence to show that Li ions favor the pathway through the LLZO ceramic phase instead of the PEO-LLZO interface or PEO. This approach can be widely applied to study ion pathways in ionic conductors and to provide useful insights for developing composite materials for energy storage and harvesting.
RESUMEN
Particle and domain sizes strongly influence the properties of materials. Here we present an NMR approach based on paramagnetic relaxation enhancement (PRE) relayed by spin diffusion (SD), which allows us to determine lengths in the nm-µm range. We demonstrate the method on multicomponent organic polymer mixtures by selectively doping one component with a paramagnetic center in order to measure the domain size in a second component. Using this approach we determine domain sizes in ethyl cellulose/hydroxypropyl cellulose film coatings in pharmaceutical controlled release formulations. Here we measure particle sizes ranging from around 50 to 200 nm.
Asunto(s)
Nanoestructuras/química , Celulosa/análogos & derivados , Celulosa/química , Espectroscopía de Resonancia MagnéticaRESUMEN
Solid-state Li metal batteries (SSLMBs) are widely investigated since they possess promising energy density and high safety. However, the poor interfacial compatibility between the electrolyte and electrodes limits their promising development. Herein, a robust composite electrolyte (poly(vinyl ethylene carbonate) electrolyte with 3 wt % of BaTiO3, PVEC-3BTO) with excellent interfacial performance is rationally designed by incorporating ferroelectric BaTiO3 (BTO) nanoparticles into the poly(vinyl ethylene carbonate) (PVEC) electrolyte matrix. Benefiting from the high dielectric constant and ferroelectric properties of BTO, the interfacial compatibility between electrolytes and electrodes was significantly improved. The enhanced Li+ transference number (0.64) of solid electrolyte and in situ generated BaF2 inorganic interphase contribute to the enhanced cycling stability of PVEC-3BTO based Li//Li symmetrical batteries. Furthermore, the antioxidation ability of PVEC-3BTO has also been enhanced by modulating the local electric field for good pairing with high-voltage LiCoO2 material. Therefore, in this work, the mechanism of BTO for improving interfacial compatibility is revealed, and also useful methods for addressing the interface issues of SSLMBs have been provided.
RESUMEN
The In-based double perovskite halides have been widely studied for promising optical-electric applications. The halide hexagonal perovskite Cs2LiInCl6 was isolated using solid-state reactions and investigated using X-ray diffraction and solid-state NMR spectra. The material adopts a 12-layered hexagonal structure (12R) consisting of layered cationic orders driven by the cationic charge difference and has Li+ cations in the terminal site and In3+ in the central site of face-shared octahedron trimers. Such a cationic ordering pattern is stabilized by electrostatic repulsions between the next-nearest neighboring cations in the trimers. The LiCl6 octahedron displays large distortion and is confirmed by 7Li SS NMR in the Cs2LiInCl6. The Cs2LiInCl6 material has a direct bandgap of ~4.98â eV. The Cs2LiInCl6: Mn2+ displays redshift luminescence (centered at ~610-622â nm) from the substituted Mn2+ emission in octahedron with larger PLQY (17.8 %-48 %) compared with that of Cs2NaInCl6: Mn2+. The Mn-doped materials show luminescent concentration quenching and thermal quenching. The composition Cs2Li0.99In0.99Mn0.02Cl6 exhibits the highest PL intensity, a maximum PLQY of 48 %, and high luminescent retention rate of ~86 % below 400â K and is suitable for application for pc-LED. These findings contribute to our understanding of the chloride perovskites and hold potential for widespread optical applications.
RESUMEN
Na3Zr2Si2PO12 has been proven to be a promising electrolyte for solid-state sodium batteries. However, its poor conductivity prevents application, caused by the large ionic resistance created by the grain boundary. Herein, we propose an additional glass phase (Na-Ga-Si-P-O phase) to connect the grain boundary via Ga ion introduction, resulting in enhanced sodium-ion conduction and electrochemical performance. The optimized Na3Zr2Si2PO12-0.15Ga electrolyte exhibits Na+ conductivity of 1.65 mS cm-1 at room temperature and a low activation energy of 0.16 eV, with 20% newly formed glass phase enclosing the grain boundary. Temperature-dependent NMR line shapes and spin-lattice relaxation were used to estimate the Na self-diffusion and Na ion hopping. The dense glass-ceramic electrolyte design strategy and the structure-dynamics-property correlation from NMR, can be extended to the optimization of other materials.