RESUMEN
The chlorine radical is a strong HAT (Hydrogen Atom Transfer) agent that is very useful for the functionalization of C(sp3)-H bonds. Albeit highly attractive, its generation from the poorly oxidizable chloride ion mediated by an excited photoredox catalyst is a difficult task. We now report that 8Rf8-4CzIPN, an electron-deficient fluorous derivative of the benchmark 4CzIPN photoredox catalyst belonging to the donor-acceptor carbazole-cyanoarene family, is not only a better photooxidant than 4CzIPN, but also becomes an excellent host for the chloride ion. Combining these two properties ultimately makes the self-assembled 8Rf8-4CzIPNâ¢Cl- dual catalyst highly reactive in redox-neutral Giese-type C(sp3)-H bond alkylation reactions promoted by the chlorine radical. Additionally, because of its fluorous character, the efficient separation/recovery of 8Rf8-4CzIPN could be envisioned.
RESUMEN
The combination of NiIIX2 salts with a bipyridine-type ligand and aromatic carbonyl-based chromophores has emerged as a benchmark precatalytic system to efficiently conduct cross-couplings mediated by light. Mechanistic studies have led to two scenarios in which Ni0 is proposed as the catalytic species. Nonetheless, in none of these studies has a NiII to Ni0 photoreduction been evidenced. By exploiting UV-visible, nuclear magnetic resonance, resonance Raman, electron paramagnetic resonance, and dynamic light scattering spectroscopies and also transmission electron microscopy, we report that, when photolyzed by UVA in alcohols, the structurally defined [NiII2(µ-OH2)(dtbbpy)2(BPCO2)4] complex 1 integrating a benzophenone chromophore is reduced into a diamagnetic NiI dimer of the general formula [NiI2(dtbbpy)2(BPCO2)2]. In marked contrast, in THF, photolysis led to the fast formation of Ni0, which accumulates in the form of metallic ultrathin Ni nanosheets characterized by a mean size of â¼100 nm and a surface plasmon resonance at 505 nm. Finally, it is shown that 1 combined with UVA irradiation catalyzes cross-couplings, that is, C(sp3)-H arylation of THF and O-arylation of methanol. These results are discussed in light of the mechanisms proposed for these cross-couplings with a focus on the oxidation state of the catalytic species.
RESUMEN
Polyurethane (PU) foams are indisputably daily essential materials found in many applications, notably for comfort (for example, matrasses) or energy saving (for example, thermal insulation). Today, greener routes for their production are intensively searched for to avoid the use of toxic isocyanates. An easily scalable process for the simple construction of self-blown isocyanate-free PU foams by exploiting the organocatalyzed chemo- and regioselective additions of amines and thiols to easily accessible cyclic carbonates is described. These reactions are first validated on model compounds and rationalized by DFT calculations. Various foams are then prepared and characterized in terms of morphology and mechanical properties, and the scope of the process is illustrated by modulating the composition of the reactive formulation. With impressive diversity and accessibility of the main components of the formulations, this new robust and solvent-free process could open avenues for construction of more sustainable PU foams, and offers the first realistic alternative to the traditional isocyanate route.
RESUMEN
The catalytic conversion of (ligno)cellulose is currently subject of intense research. Isosorbide is one of the interesting products that can be produced from (ligno)cellulose as it can be used for the synthesis of a wide range of pharmaceuticals, chemicals, and polymers. Isosorbide is obtained after the hydrolysis of cellulose to glucose, followed by the hydrogenation of glucose to sorbitol that is then dehydrated to isosorbide. The one-pot process requires an acid and a hydrogenation catalyst. Several parameters are of importance during the direct conversion of (ligno)cellulose such as the acidity, the crystallinity and the particle size of cellulose as well as the nature of the feedstocks. This review highlights all these parameters and all the strategies employed to produce isosorbide from (ligno)cellulose in a one-pot process.
RESUMEN
This Review provides comprehensive guidelines for the design of CO2-philic copolymers through an exhaustive and precise coverage of factors governing the solubility of different classes of polymers. Starting from computational calculations describing the interactions of CO2 with various functionalities, we describe the phase behavior in sc-CO2 of the main families of polymers reported in literature. The self-assembly of amphiphilic copolymers of controlled architecture in supercritical carbon dioxide and their use as stabilizers for water/carbon dioxide emulsions then are covered. The relationships between the structure of such materials and their behavior in solutions and at interfaces are systematically underlined throughout these sections.
RESUMEN
Described is a robust platform for the synthesis of a large diversity of novel functional CO2 -sourced polymers by exploiting the regiocontrolled ring-opening of α-alkylidene carbonates by various nucleophiles. The reactivity of α-alkylidene carbonates is dictated by the exocyclic olefinic group. The polyaddition of CO2 -sourced bis(α-alkylidene carbonate)s (bis-αCCs) with primary and secondary diamines provides novel regioregular functional poly(urethane)s. The reactivity of bis-αCCs is also exploited for producing new poly(ß-oxo-carbonate)s by organocatalyzed polyaddition with a diol. This synthesis platform provides new functional variants of world-class leading polymer families (polyurethanes, polycarbonates) and valorizes CO2 as a chemical feedstock.
RESUMEN
This article spotlights the interest in using co-localized infrared (IR)-Raman spectroscopy as an innovative approach for the in situ monitoring of complex gas mixtures, e.g., hydrogen (H2), nitrogen (N2), carbon monoxide (CO), carbon dioxide (CO2), and methane (CH4), at elevated pressures. Thus, by combining the IR and Raman spectra of CH4, we proposed a new methodology for the calibration of the Raman spectra to circumvent the fact that Raman intensities are arbitrary (laser power, instrument response, integration time, and fluorescence). Applying our methodology to scale several consecutive experiments, the concentrations of all gases were determined with a relative uncertainty lower than 10%. These original results highlight the interest in co-localized IR-Raman spectroscopy analysis in a single cell for the quantitative analysis of solutes by Raman spectroscopy without the use of an internal standard.
RESUMEN
An enhancement of poly(vinyl ester) solubility in supercritical carbon dioxide (sc-CO(2)) can be achieved by decreasing the strength of the polymer-polymer interactions. To demonstrate this, a library of statistical copolymers of vinyl acetate and vinyl trifluoroacetate was synthesized by RAFT/MADIX polymerization with varying compositions at a given number-average molecular weight. These copolymers exhibited unprecedentedly low cloud-point pressures in sc-CO(2) at 40 °C compared with previously reported poly(vinyl esters). Surface tension measurements combined with a computational approach evidenced the prominent role played by polymer-polymer interactions.
RESUMEN
The nature and strength of the interactions occurring between epoxides and CO(2) have been investigated by combining infrared spectroscopy with quantum chemistry calculations. A series of infrared absorption experiments on four model epoxide molecules highly diluted in supercritical CO(2) have been performed at constant temperature T = 40 °C for various CO(2) pressures varying from 1 to 30 MPa. Then, we carried out a theoretical analysis based on quantum chemistry calculations using Density Functional Theory (B3PW91 and CAM-B3LYP) and ab initio (MP2) computational methods. A very good agreement between experimental and calculated vibrational frequency shifts of the epoxide ring vibrations group was obtained using the CAM-B3LYP functional, hence validating the calculated optimized geometries of the epoxide-CO(2) complexes. Whatever the epoxide considered, CO(2) is found to be on average above the oxygen atom of the epoxy ring and interacts with the carbon atom of CO(2) through a Lewis acid-Lewis base type of interaction. The substituents on the epoxide ring are found to influence the stability of the epoxide-CO(2) complexes mainly because of the partial charge on the oxygen atom that is sensitive to the nature of the substituent.
RESUMEN
The supercritical impregnation process was used as a green technology for the elaboration of drug delivery intraocular lenses to mitigate the risk of post-operatory endophthalmitis after cataract surgery. Commercially available hydrophobic acrylic (copolymer of benzyl methacrylate and methyl methacrylate) intraocular lenses (IOLs) were impregnated with gatifloxacin, a fourth generation fluoroquinolone drug, using pure supercritical CO2 (scCO2) to obtain solvent-free loaded implants. The interaction phenomena involved in the supercritical impregnation were studied by following in situ scCO2 sorption within the polymer support and the subsequent IOL swelling, and by taking into account drug solubility in the supercritical fluid phase. The drug impregnation yields determined though in-vitro release studies varied between 0.33 and 1.07 ± 0.07 µg·mg-1IOL in the studied experimental conditions (8 to 25 MPa, 308 to 328 K and 30 to 240 min impregnation duration). An impregnation duration longer or equal to the time required for a complete CO2 uptake by the polymer as well as a higher pressure or a higher temperature over the crossover pressure delimiting the upper limit of the retrograde solubility zone, led to higher drug impregnation yields.
Asunto(s)
Composición de Medicamentos/métodos , Sistemas de Liberación de Medicamentos , Endoftalmitis/prevención & control , Gatifloxacina/administración & dosificación , Lentes Intraoculares/efectos adversos , Dióxido de Carbono/química , Endoftalmitis/etiología , Gatifloxacina/química , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Polímeros/química , Solubilidad , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
The CO(2) sorption and polymer swelling of hydroxytelechelic polybutadiene (HTPB) and poly(ethylene glycol) (PEG) have been investigated as a function of temperature and CO(2) pressure by combining in situ near-infrared spectroscopy with molecular modeling. The results reported here for the PEG-CO(2) system are in a very good agreement with literature data hence validating our experimental procedure. It has been found that CO(2) sorption and swelling effect is more important for PEG than for HTPB. For both polymers, an increase of temperature leads to a strong decrease of both the CO(2) sorption and swelling. In order to identify at a molecular level the nature and strength of intermolecular interaction occurring between CO(2) and the polymers, ab initio calculations have been performed on model structures, representative of the main functional group of the polymer, and their complex with CO(2). Trans-3-hexene (3-Hex), propyl methyl ether (PME) and methoxytrimethylsilane (MTMS) have been selected to mimic the functional groups of HTPB, PEG and polydimethyl siloxane (PDMS), respectively. The last system has been chosen since previous works on the swelling of PDMS by high pressure CO(2) have revealed the high ability of CO(2) to swell both uncrosslinked and crosslinked PDMS. The calculated stabilization energies of the MTMS-CO(2), PME-CO(2), and 3-Hex-CO(2) dimers indicate that CO(2) interacts specifically with the three moieties through a Lewis acid-Lewis base type of interaction with the energies displaying the following order: E(MTMS-CO(2)) = -3.59 > E(PME-CO(2)) = -3.43 > E(3-Hex-CO(2)) = -2.5 kcal/mol. Since the solubility of CO(2) in the corresponding homopolymers follows the same order, it is evidenced that the stronger the interaction between CO(2) and the polymer, the higher the CO(2) sorption. Therefore, even if one cannot exclude the influence of free volume and chain flexibility of the polymer, it appears that the solubility of CO(2) in the polymer is predominantly governed by the interaction between CO(2) and the polymer. Although the same trend is observed for the swelling of the polymer as a function of the CO(2) pressure, we have found that for a given value of CO(2) sorption, the swelling of the polymer depends on its nature, meaning that the swelling is not only governed by the CO(2)-polymer interaction but also by other intrinsic properties of the polymer.
RESUMEN
Two organotin catalysts, namely, dibutyltin dilaurate (DBTDL) and dibutyltin diacetate (DBTDA), commonly used in the synthesis of polyurethanes, have been investigated combining vibrational spectroscopic measurements with molecular modeling. The structure and vibrational spectra of the DBTDA molecule have been simulated using density functional theory. Thus, because of the Sn...O interactions, the lowest energy conformer reveals an asymmetrically chelated structure of the acetate groups with a C2v symmetry. The experimental IR spectra of DBTDA and DBTDL diluted in carbon tetrachloride and in supercritical CO2 show unambiguously that these molecules adopt the asymmetrically chelated conformation in the solvent. A new attribution of the main peaks constituting the respective IR spectra of the catalysts could be carried out. Finally, from the IR spectra of the two catalysts diluted in supercritical CO2 reported as a function of time, it was found that both molecules react slightly with CO2. However, their spectrum remains unchanged at the earliest stage of the polymerization, indicating that these molecules preserve a catalytic activity similar to that noted in conventional organic solvent.
RESUMEN
INTRODUCTION: Drug-eluting sutures represent the next generation of surgical sutures since they fulfill their mechanical functions but also deliver the drug in their vicinity after implantation. These implants are produced by a variety of manufacturing processes. Drug-eluting sutures represent the next generation of surgical sutures since they fulfill their mechanical functions but also deliver the drug in their vicinity after implantation. These implants are produced by a variety of manufacturing processes. Two general approaches can be followed: (i) the ones that add the API into the material during the manufacturing process of the suture and (ii) the ones that load the API to an already manufactured suture. Areas covered: This review provides an overview of the current manufacturing processes for drug-eluting suture production and discusses their benefits and drawbacks depending on the type of drugs. The mechanical properties and the drug delivery profile of drug-eluting sutures are highlighted since these implants must fulfill both criteria. Expert opinion: For limited drug contents, melt extrusion and electrospinning are the emerging processes since the drug is added during the suture manufacture process. Advantageously, the drug release profile can be tuned by controlling the processing parameters specific to each process and the composition of the drug-containing polymer. If high drug content is targeted, the coating or grafting of a drug layer on a pre-manufactured suture allows for preservation of the tensile strength requirements of the suture.
Asunto(s)
Sistemas de Liberación de Medicamentos , Suturas , Preparaciones Farmacéuticas/administración & dosificación , Preparaciones Farmacéuticas/químicaRESUMEN
The metal-free coupling of a propargylic alcohol with CO2 catalysed by guanidine derivatives was investigated in detail through the combination of online kinetic studies by inâ situ attenuated-total reflection IR (ATR-IR) spectroscopy and DFT calculations. Bicyclic guanidines, namely 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) and 7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene (MTBD) are effective catalysts for the conversion of 2-methyl-3-butyn-2-ol to α-methylene cyclic carbonate and oxoalkyl acyclic carbonate under mild reaction conditions. The lower selectivity of TBD in comparison with MTBD towards the formation of α-methylene cyclic carbonate was elucidated from DFT calculations and is related to the bifunctional activity (base/H-bond donor) of TBD decreasing the Gibbs free energy of the reaction path for the formation of the acyclic carbonate.
Asunto(s)
Alquinos/química , Dióxido de Carbono/química , Propanoles/química , Catálisis , Cinética , Modelos Moleculares , Conformación Molecular , Teoría CuánticaRESUMEN
The organocatalytic coupling of CO2 with oxetanes is investigated under solvent-free conditions. The influence of the main reaction parameters (type of organocatalytic system, pressure, and temperature) on the yield, the product formed, and the selectivity of the reaction are discussed. An onium salt combined with a fluorinated alcohol promotes the efficient and selective organocatalytic synthesis of α,ω-hydroxyl oligocarbonates by coupling CO2 with oxetanes at 130 °C and at a CO2 pressure as low as 2â MPa. NMR characterizations were correlated with matrix-assisted laser desorption/ionization with time-of-flight mass spectrometer (MALDI-TOF) analyses for elucidating the structure of the oligomers. Online FTIR studies under pressure, NMR titrations, and DFT calculations allowed an in-depth understanding of the reaction mechanism. Finally, CO2 -based poly(carbonate-co-urethane)s were synthesized by step-growth polymerization of hydroxyl telechelic oligocarbonates with 4,4'-methylene diphenyl diisocyanate (MDI). The organocatalytic system described herein constitutes an innovative sustainable route to the selective preparation of hydroxyl telechelic carbonates of high interest for many applications, notably for the polyurethane business (especially for coatings or foams).
Asunto(s)
Dióxido de Carbono/química , Éteres Cíclicos/química , Benceno/química , Catálisis , Enlace de Hidrógeno , Isocianatos/química , Modelos Moleculares , Conformación Molecular , Polimerizacion , Poliuretanos/química , Presión , Compuestos de Amonio Cuaternario/química , TemperaturaRESUMEN
The addition of fluorinated alcohols to onium salts provides highly efficient organocatalysts for the chemical fixation of CO2 into epoxides under mild experimental conditions. The combination of online kinetic studies, NMR titrations and DFT calculations allows understanding this synergistic effect that provides an active organocatalyst for CO2 /epoxides coupling.
Asunto(s)
Alcoholes/química , Dióxido de Carbono/química , Compuestos Epoxi/química , Halogenación , Catálisis , Tecnología Química Verde , Cinética , Modelos Moleculares , Conformación MolecularRESUMEN
The novel monomer, vinyl trifluorobutyrate (VTFBu), when polymerized in a controlled fashion by RAFT/MADIX polymerization with a xanthate transfer agent, yields poly(vinyl ester)s with improved solubility in supercritical carbon dioxide. The thermodynamic parameters controlling the solubility of VTFBu/vinyl acetate statistical copolymers are discussed based on ab initio calculations, glass transition temperatures of the copolymers, and surface tension measurements. The enhanced solubility of this new class of CO2-philic polymer combined with its good chemical stability render it attractive for the preparation of next-generation macromolecular surfactants for the formation of water-scCO2 emulsions.
RESUMEN
Near- (NIR) and mid-infrared (MIR) absorption spectra of pure and water-saturated 1-octanol were measured along the liquid-gas coexistence curve from ambient temperature and pressure up to 300 degrees C and 10 MPa. Density of the mixture as a function of temperature was assessed by spectral analysis in the NIR region. Two distinct regimes of temperature were identified in the evolution of solvent-subtracted spectra: at normal conditions and up to 180 degrees C, water is organized in multimeric H-bonded aggregates, while at higher temperature, mainly dimers and monomers exist. Water-water and alcohol-alcohol H-bonding interactions play a major role in wet octanol at low temperature, with resulting microheterogeneity and water segregation at a molecular level; on the other hand, water-alcohol interactions are relevant at higher temperature, as also revealed by the estimated density. At low temperature, water dissolved in octanol shows features which are comparable to those of interfacial water obtained by vibrational sum frequency (VSF) spectroscopy, while at high temperature the spectra generally reproduce those of water in the supercritical phase. Overall spectral assignment was supported by ab initio calculations at the MP2 level on small water clusters.
Asunto(s)
1-Octanol/química , Agua/química , Calor , Enlace de Hidrógeno , Espectrofotometría Infrarroja , Espectroscopía Infrarroja CortaRESUMEN
The nature and the strength of the interactions occurring between aromatic primary amines and CO(2) have been investigated by combining infrared spectroscopy with molecular modelling. A series of infrared absorption experiments on various aromatic mono- and diamines in supercritical CO(2) have been performed at constant temperature (T = 40 degrees C) for various CO(2) pressures varying from 6 to 30 MPa. Then, we carried out a theoretical analysis based on quantum calculations using both density functional (B3LYP) and ab initio (MP2) computational methods. Whatever the amine considered, CO(2) is found to be on average above the nitrogen atom of the NH(2) group for which the donating lone pair interacts with the carbon atom of CO(2). Several types of interactions have been identified, namely, electron donor-acceptor (EDA), hydrogen bonds as well as dispersion forces. Contrary to aliphatic amines, the dispersion interaction is significant in the aromatic amine-CO(2) complexes because of the presence of the aromatic ring. The substituents are found to influence the stability and structure of the amine-CO(2) complexes, directly by electrostatic and steric effects of the substituent, and indirectly through the change in the partial charge on the nitrogen atom. Finally, a good correlation has been put in evidence between the partial charge on the nitrogen atom and the EDA interaction occurring between the aromatic amines and CO(2).
Asunto(s)
Aminas/química , Dióxido de Carbono/química , Hidrocarburos Aromáticos , Teoría Cuántica , Simulación por Computador , Estructura Molecular , Espectrofotometría InfrarrojaRESUMEN
The role played by supercritical carbon dioxide used as a dispersant medium in the synthesis of polyurethane particles has been investigated. High-temperature-high-pressure in situ infrared spectroscopic measurements combined with ab initio calculations were performed to investigate the hydroxyl stretching vibrations of ethylene glycol (EG) and 1,4-butanediol (BD), two monomers commonly used in the field of step growth polymerization. Specific interactions between the diols and CO2 have been put in evidence. While the structural characteristics of EG and BD are very similar--both diols have a gauche conformation due to an internal H-bond between the two hydroxyl functions--they behave differently in the presence of dense CO2. In the case of EG, this internal H-bond is broken, allowing the diol and CO2 to form a complex through the conjunction of a Lewis acid-Lewis base (LA-LB) interaction and a new H-bond. When BD complexes to CO2, this internal H-bond remains and is even reinforced indirectly by the LA-LB interaction occurring between the two moieties. In both cases, such a complex formation induces a polarization of the hydroxyl groups and consequently an increase of their nucleophilicity.