Enzymes' Power for Plastics Degradation.

Plastics are everywhere in our modern way of living, and their production keeps increasing every year, causing major environmental concerns. Nowadays, the end-of-life management involves accumulation in landfills, incineration, and recycling to a lower extent. This ecological threat to the environment is inspiring alternative bio-based solutions for plastic waste treatment and recycling toward a circular economy. Over the past decade, considerable efforts have been made to degrade commodity plastics using biocatalytic approaches. Here, we provide a comprehensive review on the recent advances in enzyme-based biocatalysis and in the design of related biocatalytic processes to recycle or upcycle commodity plastics, including polyesters, polyamides, polyurethanes, and polyolefins. We also discuss scope and limitations, challenges, and opportunities of this field of research. An important message from this review is that polymer-assimilating enzymes are very likely part of the solution to reaching a circular plastic economy.

Expedient Synthesis of Thermally Stable Acyclic Amino(haloaryl)carbenes: Experimental and Theoretical Evidence of "Push-Pull" Stabilized Carbenes.

A library of novel structurally related singlet carbenes, namely, acyclic amino(haloaryl)carbenes, was designed by a high-yielding two-step procedure, and their chemical stability explored both experimentally and theoretically. Thanks to a careful selection of both the amino and the aryl substitution pattern, these carbenes exhibit a wide range of stability and reactivity, spanning from rapid self-dimerization for carbenes featuring ortho-F substituents to very high chemical stability as bare carbenes, up to 60 °C for several hours for compounds carrying ortho-Br substituents. Their structure was determined through NMR and X-ray diffraction studies, and their reactivity evaluated in benchmark reactions, highlighting the ambiphilic character of this novel class of singlet carbenes. In contrast with previously reported aryl substituents incorporating o-CF3 and t-Bu groups, which were considered "spectator", the high chemical stability of some of these carbenes relates to the stabilization of the σ-orbital of the carbene center by the π-accepting haloaryl substituent through delocalization. Kinetic protection of the carbene center is also provided by the ortho-halogen atoms, as demonstrated computationally. This push-pull stabilization effect makes acyclic amino(haloaryl) carbenes among the most ambiphilic stable carbenes reported to date, holding promise for a variety of applications.

Lanthanide-Based Single-Chain Nanoparticles as "Visual" Pass/Fail Sensors of Maximum Permissible Concentration of Cu2+ Ions in Drinking Water.

The maximum permissible concentration (m.p.c.) of Cu2+ ions in drinking water, as set by the World Health Organization (WHO) is m.p.c. (Cu2+)WHO = 30 × 10-6 m, whereas the US Environmental Protection Agency (EPA) establishes a more restrictive value of m.p.c. (Cu2+)EPA = 20 × 10-6 m. Herein, for the first time ever, a family of m.p.c. (Cu2+) "visual" pass/fail sensors is developed based on water-soluble lanthanide-containing single-chain nanoparticles (SCNPs) exhibiting an average hydrodynamic diameter less than 10 nm. Both europium (Eu)- and terbium (Tb)-based SCNPs allow excessive Cu2+ to be readily detected in water, as indicated by the red-to-transparent and green-to-transparent changes, respectively, under UV light irradiation, occurring at 30 × 10-6 m Cu2+ in both cases. Complementary, dysprosium (Dy)-based SCNPs show a yellow color-to-transparent transition under UV light irradiation at ≈15 × 10-6 m Cu2+. Eu-, Tb-, and Dy-containing SCNPs prove to be selective for Cu2+ ions as they do not respond against other metal ions, such as Fe2+, Ag+, Co2+, Ba2+, Ni2+, Hg2+, Pb2+, Zn2+, Fe3+, Ca2+, Mn2+, Mg2+, or Cr3+. These new m.p.c. (Cu2+) "visual" pass/fail sensors are thoroughly characterized by a combination of techniques, including size exclusion chromatography, dynamic light scattering, inductively coupled plasma-mass spectrometry, as well as infrared, UV, and fluorescence spectroscopy.

Group-Transfer Polymerization-Induced Self-Assembly (GTPISA) in Non-polar Media: An Organocatalyzed Route to Block Copolymer Nanoparticles at Room Temperature.

Polymerization-induced self-assembly (PISA) enables the synthesis at large scale of a wide variety of functional nanoparticles. However, a large number of works are related to controlled radical polymerization (CRP) methods and are generally undertaken at elevated temperatures (>50 °C). Here is the first report on methacrylate-based nanoparticles fabricated by group transfer polymerization-induced self-assembly (GTPISA) in non-polar media (n-heptane). This GTPISA process is achieved at room temperature (RT) using 1-methoxy-1-(trimethylsiloxy)-2-methylprop-1-ene (MTS) and tetrabutylammonium bis-benzoate (TBABB) as initiator and organic catalyst, respectively. Under these conditions, well-defined metal-free and colorless diblock copolymers are produced with efficient crossover from the non-polar stabilizing poly(lauryl methacrylate) (PLMA) block to the non-soluble poly(benzyl methacrylate) (PBzMA) segment. The resulting PLMA-b-PBzMA block copolymers simultaneously self-assemble into nanostructures of various sizes and morphologies. GTPISA in non-polar solvent proceeds rapidly at RT and avoids the use of sulfur or halogenated compounds or metallic catalysts associated with the implementation of CRP methods, thus expanding the potential of PISA formulations for applications in non-polar environments.

Block Copolymer Synthesis by a Sequential Addition Strategy from the Organocatalytic Group Transfer Polymerization of Methyl Methacrylate to the Ring-Opening Polymerization of Lactide.

Sequential block copolymerization involving comonomers belonging to different classes, e.g., a vinyl-type monomer and a heterocycle, is a challenging task in macromolecular chemistry, as corresponding propagating species do not interconvert easily from one to the other by crossover reactions. Here, it is first evidenced that 1-methoxy 2-methyl 1-trimethylsilyloxypropene (MTS), i.e., a silyl ketene acetal (SKA)-containing initiator, can be used in presence of the P4 -t-Bu phosphazene organic base to control the ring-opening polymerization (ROP) of racemic lactide (rac-LA). The elementary reaction, which rapidly transforms SKA groups into propagating alkoxides, can be leveraged to directly synthesize well-defined poly(methyl methacrylate)-b-polylactide block copolymers. This is achieved using P4 -t-Bu as the single organic catalyst and MTS as the initiator for the group transfer polymerization of methyl methacrylate, followed by the ROP of rac-LA. Both polymerization methods are implemented under selective and controlled/living conditions at room temperature in THF. This sequential addition strategy further expands the scope of organic catalysis of polymerizations for macromolecular engineering of block copolymers involving propagating species of disparate reactivity.

Bulk Organocatalytic Synthetic Access to Statistical Copolyesters from l-Lactide and ε-Caprolactone Using Benzoic Acid.

The development of synthetic strategies to produce statistical copolymers based on l-lactide (l-LA) and ε-caprolactone (CL), denoted as P(LA- stat-CL), remains highly challenging in polymer chemistry. This is due to the differing reactivity of the two monomers during their ring-opening copolymerization (ROcP). Yet, P(LA- stat-CL) materials are highly sought after as they combine the properties of both polylactide (PLA) and poly(ε-caprolactone) (PCL). Here, benzoic acid (BA), a naturally occurring, cheap, readily recyclable, and thermally stable weak acid, is shown to trigger the organocatalyzed ring-opening copolymerization (OROcP) of l-LA and CL under solvent-free conditions at 155 °C, in presence of various alcohols as initiators, with good control over molar masses and dispersities (1.11 < D < 1.35) of the resulting copolyesters. Various compositions can be achieved, and the formation of statistical compounds is shown through characterization by 1H, 13C, and diffusion ordered spectroscopy NMR spectroscopies and by differential scanning calorimetry, as well as through the determination of reactivity ratios ( rLA = 0.86, rCL = 0.86), using the visualization of the sum of squared residuals space method. Furthermore, this BA-OROcP process can be exploited to access metal-free PLA- b-P(LA- stat-CL)- b-PLA triblock copolymers, using a diol as an initiator. Finally, residual traces of BA remaining in P(LA- stat-CL) copolymers (<0.125 mol %) do not show any cytotoxicity toward hepatocyte-like HepaRG cells, demonstrating the safety of this organic catalyst.

Catalytically Active N-Heterocyclic Carbene Release from Single-Chain Nanoparticles Following a Thermolysis-Driven Unfolding Strategy.

The need for efficient, tailor-made catalysts has inspired chemists to design synthetic macromolecular architectures for selective catalysis. To this purpose, herein the synthesis and in-depth characterization of Ag(I)-crosslinked single-chain nanoparticles (SCNPs) is reported and their application as catalysts is demonstrated. Specifically, a copolymer of styrenic benzimidazolium chloride is synthesized as a linear precursor via reversible addition-fragmentation chain-transfer polymerization. Metalation of the benzimidazolium moieties by Ag(I) resulted in the intramolecular cross-linking of single chains via the formation of silver-N-heterocyclic carbene (Ag-NHC) linkages under dilute conditions. The successful formation of well-defined, robust SCNPs is evidenced by size-exclusion chromatography, dynamic light scattering, nuclear magnetic resonance spectroscopy, and transmission electron microscopy. Finally, it is demonstrated that the Ag-SCNPs can be used as NHC pre-catalysts, by first indirectly evidencing the formation of the corresponding unfolded NHC-CS2 polybetaine and then organocatalysing a benzoin condensation reaction.

Non-Isocyanate Polyurethane Soft Nanoparticles Obtained by Surfactant-Assisted Interfacial Polymerization.

Polyurethanes (PUs) are considered ideal candidates for drug delivery applications due to their easy synthesis, excellent mechanical properties, and biodegradability. Unfortunately, methods for preparing well-defined PU nanoparticles required miniemulsion polymerization techniques with a nontrivial control of the polymerization conditions due to the inherent incompatibility of isocyanate-containing monomers and water. In this work, we report the preparation of soft PU nanoparticles in a one-pot process using interfacial polymerization that employs a non-isocyanate polymerization route that minimizes side reactions with water. Activated pentafluorophenyl dicarbonates were polymerized with diamines and/or triamines by interfacial polymerization in the presence of an anionic emulsifier, which afforded non-isocyanate polyurethane (NIPU) nanoparticles with sizes in the range of 200-300 nm. Notably, 5 wt % of emulsifier was required in combination with a trifunctional amine to achieve stable PU dispersions and avoid particle aggregation. The versatility of this polymerization process allows for incorporation of functional groups into the PU nanoparticles, such as carboxylic acids, which can encapsulate the chemotherapeutic doxorubicin through ionic interactions. Altogether, this waterborne synthetic method for functionalized NIPU soft nanoparticles holds great promise for the preparation of drug delivery nanocarriers.

One-Pot Synthesis of Double Poly(Ionic Liquid) Block Copolymers by Cobalt-Mediated Radical Polymerization-Induced Self-Assembly (CMR-PISA) in Water.

Amphiphilic double poly(ionic liquid) (PIL) block copolymers are directly prepared by cobalt-mediated radical polymerization induced self-assembly (CMR-PISA) in water of N-vinyl imidazolium monomers carrying distinct alkyl chains. The cobalt-mediated radical polymerization of N-vinyl-3-ethyl imidazolium bromide (VEtImBr) is first carried out until high conversion in water at 30 °C, using an alkyl bis(acetylacetonate)cobalt(III) adduct as initiator and controlling agent. The as-obtained hydrophilic poly(N-vinyl-3-ethyl imidazolium bromide) (PVEtImBr) is then used as a macroinitiator for the CMR-PISA of N-vinyl-3-octyl imidazolium bromide (VOcImBr). Self-assembly of the amphiphilic PVEtImBr-b-PVOcImBr block copolymer, i.e., of PIL-b-PIL-type, rapidly takes place in water, forming polymer nanoparticles consisting of a hydrophilic PVEtImBr corona and a hydrophobic PVOcImBr core. Preliminary investigation into the effect of the size of the hydrophobic block on the dimension of the nanoparticles is also described.

Imidazolium-Based Poly(Ionic Liquid)s Featuring Acetate Counter Anions: Thermally Latent and Recyclable Precursors of Polymer-Supported N-Heterocyclic Carbenes for Organocatalysis.

Statistical copoly(ionic liquid)s (coPILs), namely, poly(styrene)-co-poly(4-vinylbenzylethylimidazolium acetate) are synthesized by free-radical copolymerization in methanolic solution. These coPILs serve to in situ generate polymer-supported N-heterocyclic carbenes (NHCs), referred to as polyNHCs, due to the noninnocent role of the weakly basic acetate counter-anion interacting with the proton in C2-position of pendant imidazolium rings. Formation of polyNHCs is first evidenced through the quantitative formation of NHC-CS2 units by chemical postmodification of acetate-containing coPILs, in the presence of CS2 as electrophilic reagent (= stoichiometric functionalization of polyNHCs). The same coPILs are also employed as masked precursors of polyNHCs in organocatalyzed reactions, including a one-pot two-step sequential reaction involving benzoin condensation followed by addition of methyl acrylate, cyanosilylation, and transesterification reactions. The catalytic activity can be switched on and off successively upon thermal activation, thanks to the deprotonation/reprotonation equilibrium in C2-position. NHC species are thus in situ released upon heating at 80 °C (deprotonation), while regeneration of the coPIL precursor occurs at room temperature (reprotonation), triggering its precipitation in tetrahydrofuran. This also allows recycling the coPIL precatalyst by simple filtration, and reusing it for further catalytic cycles. The different organocatalyzed reactions tested can thus be performed with excellent yields after several cycles.

From the N-Heterocyclic Carbene-Catalyzed Conjugate Addition of Alcohols to the Controlled Polymerization of (Meth)acrylates.

Among various N-heterocyclic carbenes (NHCs) tested, only 1,3-bis(tert-butyl)imidazol-2-ylidene (NHC(tBu) ) proved to selectively promote the catalytic conjugate addition of alcohols onto (meth)acrylate substrates. This rather rare example of NHC-catalyzed 1,4-addition of alcohols was investigated as a simple means to trigger the polymerization of both methyl methacrylate and methyl acrylate (MMA and MA, respectively). Well-defined α-alkoxy poly(methyl (meth)acrylate) (PM(M)A) chains, the molar masses of which could be controlled by the initial [(meth)acrylate]0/[ROH]0 molar ratio, were ultimately obtained in N,N-dimethylformamide at 25 °C. A hydroxyl-terminated poly(ethylene oxide) (PEO-OH) macro-initiator was also employed to directly access PEO-b-PMMA amphiphilic block copolymers. Investigations into the reaction mechanism by DFT calculations revealed the occurrence of two competitive concerted pathways, involving either the activation of the alcohol or that of the monomer by NHC(tBu) .

Poly(2-oxazoline)-based nanogels as biocompatible pseudopolypeptide nanoparticles.

Hydrophilic nanogels based on partially hydrolyzed poly(2-ethyl-2-oxazoline) were synthesized in dilute aqueous media in the presence of 1,6-hexanediol diglycidyl ether as a cross-linker. Nanogel formation was monitored by DLS and HSQC NMR spectroscopy, and the final nano-objects were characterized by DLS, TEM, AFM, and NanoSight analyses. Nanogels with a hydrodynamic radius of 78 nm exhibiting a slight positive surface charge were obtained. MTS assays (cell metabolic activity test) evidenced that nanogels were nontoxic in the investigated concentration range (i.e., 0.1 to 400 µg/mL) and that no specific interaction with bovine serum albumin was observed.

Crystallisation-driven self-assembly of poly(2-isopropyl-2-oxazoline)-block-poly(2-methyl-2-oxazoline) above the LCST.

The solution behaviour in water of a polyoxazoline-type block copolymer, namely poly(2-isopropyl-2-oxazoline)-block-poly(2-methyl-2-oxazoline), denoted as P(iPrOx-b-MeOx), above the lower critical solution temperature (LCST) of the PiPrOx block was exploited to induce a temporary or permanent self-assembly. Spherical micelles were first obtained and could be disassembled in a reversible manner when kept for a short period of time (i.e. t < 90 min) above the LCST, and cooled down to room temperature. In contrast, annealing the copolymer solution for more than 90 min at 65 °C induced the crystallisation of the PiPrOx block, as evidenced by wide angle X-ray scattering (WAXS) experiments. This crystallisation-driven self-assembly phenomenon resulted in different morphologies, including spherical and distorted crystallised micelles and micron-size fibers, their relative proportion varies with the annealing time. Formation of micron-size range fiber-like structures might be explained by the re-organization of parent crystallised micelles. The crystal structure, as determined by WAXS, appeared to be identical to that of the PiPrOx homopolymer.

Organocatalyzed step-growth polymerization through desymmetrization of cyclic anhydrides: synthesis of chiral polyesters.

The polymerization of prochiral bis-anhydrides with diols catalyzed by a cinchona alkaloid was shown to provide chiral polyesters in good yields and with high levels of stereocontrol. The structures of the polyesters were determined by (1) H and (13) C NMR analyses, whereas their size was estimated by both size-exclusion chromatography (SEC) and MALDI-TOF mass spectrometry, which indicated that moderate degrees of polymerization were attained through this step-growth polymerization. The enantioselectivity of the process was evaluated by using chiral HPLC analysis of the bis-lactones resulting from a controlled chemoselective degradation of the polyesters. The best stereocontrol was reached for oligomers formed from bis-anhydride and diol monomers bearing rigid aromatic spacers between the reactive functional groups. In this case, average enantioselectivities were comparable to those observed during ring-opening of simple anhydrides with similar alcohols. In contrast, the use of more flexible spacers between reactive entities generally led to lower levels of stereocontrol.

Cyclodimerization versus polymerization of methyl methacrylate induced by N-heterocyclic carbenes: a combined experimental and theoretical study.

The activation behavior of two N-heterocyclic carbenes (NHCs), namely, 1,3-bis(isopropyl)imidazol-2-ylidene(NHCiPr) and 1,3-bis(tert-butyl) imidazol-2-ylidene (NHCtBu), as organic nucleophiles in the reaction with methyl methacrylate (MMA) is described. NHCtBu allows the polymerization of MMA in DMF at room temperature and in toluene at 50 °C, whereas NHCiPr reacts with two molecules of MMA, forming an unprecedented imidazolium-enolate cyclodimer (NHCiPr/MMA=1:2). It is proposed that the reaction mechanism occurs by initial 1,4-nucleophilic addition of NHCiPr to MMA, generating a zwitterionic enolate 2, followed by addition of 2 to a second MMA molecule, forming a linear imidazolium-enolate 3 (NHCiPr/MMA=1:2). Proton transfer, generating intermediate 5, followed by cyclization and release of methanol yielded the aforementioned zwitterionic cyclodimer 1:2 adduct 7, the molecular structure of which has been established by NMR spectroscopy, X-ray diffraction, and mass spectrometry. This unexpected difference between NHCtBu and NHCiPr in the reaction with MMA (polymerization and cyclodimerization, respectively) can be rationalized by using DFT calculations. In particular, the nature of the NHC strongly influences the cyclodimerization pathway, the cyclization of 5 and the release of methanol are the discriminating step and limiting step, respectively. In the case of NHCtBu, both steps are strongly disfavoured compared with that of NHCiPr (energetic difference of around 14 and 9 kcal mol(-1), respectively), preventing the cyclization mechanism from a kinetic viewpoint. Moreover, addition of a third molecule of MMA in the polymerization pathway results in a lower activation barrier than that of the limiting step in the cyclodimerization pathway (difference of around 14 kcal mol(-1)), in agreement with the formation of polymethyl methacrylate (PMMA) by using NHCtBu as nucleophile.

Enzyme-degradable self-assembled nanostructures from polymer-peptide hybrids.

The peptide PVGLIG, which is known to be selectively cleaved by the tumor-associated enzyme matrix metalloproteinase-2 (MMP-2), was conjugated to α-alkene poly(trimethylene carbonate) (PTMC) blocks of varying sizes via UV-initiated thiol-ene "click" chemistry. The PTMC precursor was synthesized by metal-free ring-opening polymerization using allyl alcohol as an initiator and an N-heterocyclic carbene as an organic catalyst. The unprecedented PVGLIG-b-PTMC hybrids were self-assembled in aqueous solution and various submicrometer-sized morphologies obtained by a nanoprecipitation process. Characterization of particle morphology was carried out by multiangle dynamic light scattering (DLS) and static light scattering (SLS) evidencing spherical nanoparticles with different morphologies and narrow size distributions. Microstructure details were also observed on transmission electron micrographs and were in good agreement with light scattering measurements showing the assembly of core-shell, large compound micelles, and vesicle morphologies, the particle morphology varying with the hydrophilic weight fractions (f) of the hybrids. These nanostructures displayed selective degradation in the presence of the cancer-associated enzyme MMP-2, as probed by the morphological change both by TEM and DLS. All these results demonstrated that PVGLIG-b-PTMC hybrids were suitable to target the tumor microenvironment.

Precision synthesis of poly(ionic liquid)-based block copolymers by cobalt-mediated radical polymerization and preliminary study of their self-assembling properties.

A poly(ionic liquid)-based block copolymer (PIL BCP), namely, poly(vinyl acetate)-b-poly(N-vinyl-3-butylimidazolium bromide), PVAc-b-PVBuImBr, is synthesized by sequential cobalt-mediated radical polymerization (CMRP). A PVAc precursor is first prepared at 30 °C in bulk by CMRP of VAc, using bis(acetylacetonato)cobalt(II), Co(acac)2, and a radical source (V-70). Growth of PVBuImBr from PVAc-Co(acac)2 is accomplished by CMRP in DMF/MeOH (2:1, v/v). This PIL BCP self-assembles in the sub-micron size range into aggregated core-shell micelles in THF, whereas polymeric vesicles are observed in water, as evidenced by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Thin-solid sample cut from raw materials analyzed by TEM shows an ordered lamellar organization by temperature-dependent synchrotron small-angle X-ray scattering (SAXS). Anion exchange can be accomplished to achieve the corresponding PIL BCP with bis(trifluorosulfonyl)imide (Tf2 N(-)) anions, which also gives rise to an ordered lamellar phase in bulk samples. A complete suppression of SAXS second-order reflection suggests that this compound has a symmetric volume fraction (f ≈ 0.5). SAXS characterization of both di- and triblock PIL BCP analogues previously reported also shows a lamellar phase of very similar behavior, with only an increase of the period by about 8% at 60 °C.

N-Heterocyclic carbenes (NHCs) as organocatalysts and structural components in metal-free polymer synthesis.

The chemistry of N-heterocyclic carbenes (NHCs) has witnessed tremendous development in the past two decades: NHCs have not only become versatile ligands for transition metals, but have also emerged as powerful organic catalysts in molecular chemistry and, more recently, in metal-free polymer synthesis. To understand the success of NHCs, this review first presents the electronic properties of NHCs, their main synthetic methods, their handling, and their reactivity. Their ability to activate key functional groups (e.g. aldehydes, esters, heterocycles, silyl ketene acetals, alcohols) is then discussed in the context of molecular chemistry. Focus has been placed on the activation of substrates finding analogies with monomers (e.g. bis-aldehydes, multi-isocyanates, cyclic esters, epoxides, N-carboxyanhydrides, etc.) and/or initiators (e.g. hydroxy- or trimethylsilyl-containing reagents) employed in such "organopolymerisation" reactions utilizing NHCs. A variety of metal-free polymers, including aliphatic polyesters and polyethers, poly(α-peptoid)s, poly(meth)acrylates, polyurethanes, or polysiloxanes can be obtained in this way. The last section covers the use of NHCs as structural components of the polymer chain. Indeed, NHC-based photoinitiators, chain transfer agents or functionalizing agents, as well as bifunctional NHC monomer substrates, can also serve for metal-free polymer synthesis.

Exploiting the Reversible Dimerization of N-Heterocyclic Carbenes to Access Dynamic Polymer Networks with an Organocatalytic Activity.

The capability of some N-heterocyclic carbenes (NHCs) to reversibly dimerize is exploited to access dynamic polymer networks. Benzimidazolium motifs serving as NHC precursors have thus been supported onto copolymer chains by reversible addition-fragmentation chain transfer (RAFT) copolymerization of styrene and up to 20 mol % of 4-vinylbenzyl-ethyl-benzimidazolium chloride. Molecular versions of 1,3-dialkyl benzimidazolium salts have been synthesized as models, the deprotonation of which with a strong base yields the NHC dimers in the form of tetraaminoalkenes. The crossover reaction between two distinct NHC homodimers, forming heterodimers, is then evidenced. Applying this deprotonation method to the RAFT-derived copolymers leads to polymer networks with cross-links consisting of labile dimerized NHC motifs. These networks can be subsequently decross-linked using two distinct triggers, namely, a monofunctional NHC precursor as competitor and carbon dioxide (CO2). In the latter case, regeneration of the network occurs by chemically fueling the linear copolymer bearing benzimidazolium motifs with tBuOK in the presence of trace amounts of water. The same networks can also be used as latent precursors of transient polyNHCs to catalyze the benzoin condensation upon heating. The polymer-supported organocatalysts can thus be used in successive catalytic cycles.

Consecutive one-pot alkyne semihydrogenation/alkene dioxygenation reactions by Pt(II)/Cu(II) single-chain nanoparticles in green solvent.

Heterobimetallic Pt(II)/Cu(II) single-chain polymer nanoparticles (SCNPs) were sequentially synthesized from a polymeric precursor featuring both α-diazo-ß-ketoester and naked ß-ketoester functional groups. Photoactivated carbene generation at λexc = 365 nm from α-diazo-ß-ketoester moieities was triggered for bonding Pt(II) ions from dichloro(1,5-cyclooctadiene)Pt(II) to the polymeric precursor, whereas Cu(II) ions were subsequently incorporated via Cu(II)-(ß-ketoester)2 complex formation using Cu(II) acetate. Both intrachain Pt(II) bonding and Cu(II) complexation were found to contribute to the folding of the polymeric precursor generating Pt(II)/Cu(II)-SCNPs as evidenced by infrared spectroscopy, size exclusion chromatography and dynamic light scattering. These heterobimetallic SCNPs proved highly efficient as soft nanocatalysts for the consecutive one-pot alkyne semihydrogenation/alkene dioxygenation reactions at room temperature in N-butylpyrrolidone, as a non-toxic alternative solvent to N,N-dimethylformamide.