RESUMEN
This study aimed to answer the question formulated according to the PICO strategy: 'Which essential oils show antimicrobial activity against biofilms formed on dental acrylic resin?' composed by population (dental acrylic resin), intervention (application of essential oils), comparison (denture cleansers, antifungal drugs, chlorhexidine, and oral mouthwashes), and outcome (antibiofilm activity). In vitro experimental studies evaluating the activity of EOs on biofilm formed on acrylic resin were included. PRISMA guidelines were followed, and the search was performed in the PubMed, Science Direct, Embase, and Lilacs databases and in the gray literature using Google Scholar and ProQuest in December 2023. A manual search of the reference lists of the included primary studies was performed. Of the 1467 articles identified, 37 were selected for full-text reading and 12 were included. Twelve EOs were evaluated, of which 11 showed activity against Candida spp., 3 against Staphylococcus aureus, and 1 against Pseudomonas aeruginosa. The EOs of Cymbopogon citratus, Cinnamomum zeylanicum, and Cymbopogon nardus showed higher action than chlorhexidine, C. nardus higher than Listerine, C. citratus higher than nystatin, and Melaleuca alternifolia higher than fluconazole and nystatin. However, chlorhexidine was more effective than Lippia sidoides and Salvia officinalis, sodium hypochlorite was more effective than L. sidoides, nystatin was more effective than Zingiber officinale, Amphotericin B more effective than Eucalyptus globulus and M. alternifolia. In conclusion, the EOs of C. zeylanicum, C. citratus, C. nardus, and M. alternifolia showed antimicrobial activity to reduce biofilm on dental acrylic resin.
Asunto(s)
Resinas Acrílicas , Biopelículas , Aceites Volátiles , Antifúngicos/farmacología , Biopelículas/efectos de los fármacos , Candida albicans , Clorhexidina/farmacología , Nistatina/farmacología , Aceites Volátiles/farmacologíaRESUMEN
To evaluate the microstructural characterization, mechanical properties and antimicrobial activity of acrylic resins incorporated with different concentrations of reduced graphene oxide (rGO). Specimens were made of self-cured and heat-cured acrylic resins for the control group and concentrations of 0.5%, 1%, and 3%. The microstructural characterization was evaluated by scanning electron microscopy (SEM) and energy-dispersive X-ray (EDS). For mechanical testing, flexural strength, and Knoop hardness tests were performed. Microbiological evaluations were performed by colony forming units (CFU) analysis, tetrazolium salt reduction (XTT), and SEM images. The modified acrylic resins showed increased mechanical properties at low concentrations (p < 0.05) and with reduced S. mutans (p < 0.05). Reduced graphene oxide interfered with the mechanical performance and microbiological properties of acrylic resins depending on the concentration of rGO, and type of polymerization and microorganism evaluated. The incorporation of graphene compounds into acrylic resins is an alternative to improve the antimicrobial efficacy and performance of the material.
RESUMEN
STATEMENT OF PROBLEM: Gel formulations containing antimicrobials are a potential alternative for the development of new medicines for the treatment of denture stomatitis (DS). However, whether they are more effective than antifungal drugs is unclear. PURPOSE: The purpose of this systematic review was to identify whether gels formulated with antimicrobial substances are more effective and biocompatible for the treatment of DS than antifungal drugs. MATERIAL AND METHODS: This systematic review was structured according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) and registered in the International Prospective Register of Systematic Reviews (PROSPERO; CRD42022379510). Searches were performed in the PubMed, Lilacs, Web of Science, Scopus, Embase, and Google Scholar databases in November 2022. Randomized and nonrandomized clinical trials comparing the efficacy of experimental gels and conventional antifungals in the treatment of DS were included. RESULTS: Gels formulated with Zataria multiflora essential oil and clove and cinnamon extracts showed higher antimicrobial efficacy compared with miconazole and clotrimazole. Formulations containing Uncaria tomentosa, Punica granatum, and propolis extract showed similar efficacy to nystatin and miconazole. Two formulations containing P. granatum were less effective than nystatin and miconazole. Gels of Z. multiflora and miconazole induced adverse effects including burning, itching, nausea, and vomiting. The included studies did not evaluate the biocompatibility of the gels. CONCLUSIONS: Gels formulated with natural antimicrobials such as Z. multiflora, U. tomentosa, P. granatum, propolis, and clove and cinnamon showed higher or similar antimicrobial efficacy to conventional antifungals in the treatment of DS. The biocompatibility of experimental gels based on natural agents should be evaluated.
RESUMEN
STATEMENT OF PROBLEM: Knowledge of the effectiveness of hydroxyapatite coatings on the surface of titanium dental implants is lacking because of difficulties in standardizing their thickness, roughness, and effect on osseointegration. The selection of articles describing this coating in osseointegration will be of great relevance to implant dentistry. PURPOSE: This systematic review aimed to answer the question, "How effective is hydroxyapatite on titanium surfaces for osseointegration?" MATERIAL AND METHODS: The Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) 2020 guidelines were followed, and the protocol was registered on the international prospective register of systematic reviews (PROSPERO) database (CRD42023422601). The PubMed, Scopus, Web of Science, and Embase databases were searched, and articles were selected manually in 2 steps by 2 blinded investigators according to the previously selected eligibility criteria. The risk of bias was assessed using the systematic review center for laboratory animal experimentation (SYRCLE) tool. RESULTS: Initially, 671 results were found. After analysis of eligibility criteria and full reading, 15 articles were included in the present review. Of these, 12 reported favorable osseointegration results for hydroxyapatite-coated surfaces, and 3 found no significant long-term difference between the coated and uncoated groups. CONCLUSIONS: Hydroxyapatite surface treatment is effective in the osseointegration of titanium dental implants because it favors the absorption of proteins, adhesion, and proliferation of bone cells when obtained by methods that ensure proper adhesion. (J Prosthet Dent xxxx;xxx:xxx-xxx).
RESUMEN
This study aimed to evaluate two methods of the incorporation of nanostructured silver vanadate decorated with silver nanoparticles (AgVO3) into acrylic resin and characterize the profile of early and late microbial communities in class and family taxonomic level by pyrosequencing. The specimens were made by adding different concentrations of AgVO3 (1, 2.5, and 5%) to the heat-activated acrylic resin by two methods: vacuum spatulation (VS) and polymeric film (PF). A control group (0%) without AgVO3 was also obtained for both methods. After 24 h and 7 days of incubation in human saliva, biofilm samples were collected, DNA was extracted, and 16S rRNA genes were sequenced by the 454-Roche sequencing platform. Seventeen classes and 51 families of bacteria were identified. The abundance of Bacteroidia, Bacilli, Negativicutes, Fusobacteria and Betaproteobacteria classes decreased after 7 days of incubation, and Clostridia, Gammaproteobacteria, and unclassified bacteria increased. The Negativicutes and Betaproteobacteria classes were more abundant when the PF method was used, and Gammaproteobacteria was more abundant when VS was used. The incorporation of 5% AgVO3 promoted a reduction in the prevalence of Bacilli, Clostridia, Negativicutes, Betaproteobacteria, and unclassified bacteria, and increased Gammaproteobacteria. The addition of AgVO3 to acrylic resin altered the early and mature microbiome formed on the specimen surface, and the PF method presented a more favorable microbial profile than the VS method.
Asunto(s)
Nanopartículas del Metal , Microbiota , Nanoestructuras , Secuenciación de Nucleótidos de Alto Rendimiento , Humanos , Polímeros , ARN Ribosómico 16S/genética , Plata , Compuestos de Plata , Vanadatos , VanadioRESUMEN
The modification of endodontic sealers with nanoparticles to confer antimicrobial activity allow greater effect, with interaction at a molecular level. The nanostructured silver vanadate decorated with silver nanoparticles (AgVO3) is a nanomaterial unprecedented in dentistry for this application. This study incorporated the AgVO3 into three endodontic sealers of different compositions and evaluate the cytotoxicity and release of compounds. The groups of commercially available AH Plus, Sealer 26, and Endomethasone N and groups of the same sealers with incorporated AgVO3 (at concentrations 2.5, 5, 10%) were prepared, and extracts of the specimens were obtained for 24 h. The cell viability (cytotoxicity) of human gingival fibroblasts (HGF) was assessed after 24 h, 7 and 14 days. Silver (Ag+) and vanadium (V4+/V5+) ion release was quantified after 24 h by ICP-MS. Data were analyzed by Kruskal-Wallis and Dunn's post-hoc (α = 0.05). The cell viability was inversely proportional to treatment time. The Sealer 26 and Endomethasone N groups were cytotoxic for HGF cells, regardless of the incorporation of the AgVO3 (p > 0.05), and the incorporation reduced cell viability of AH Plus (p < 0.05). The release of ions was proportional to the concentration of AgVO3. AH Plus released more Ag+ ions, and Sealer 26 and Endomethasone N releases more V4+/V5+ ions. In conclusion, it was not possible to confirm the influence of AgVO3 on HGF cell viability to Sealer 26 and Endomethasone N, however, nanomaterial influenced cell-viability to AH Plus, so the commercial sealers can be cytotoxic in synergy with the nanomaterial. The release of Ag+ and V4+/V5+ was proportional to the AgVO3 incorporated.
Asunto(s)
Nanopartículas del Metal , Nanoestructuras , Materiales de Obturación del Conducto Radicular , Resinas Epoxi , Fibroblastos , Humanos , Plata , VanadioRESUMEN
OBJECTIVE: To investigate the impact of incorporating the antimicrobial nanomaterial ß-AgVO3 into orthodontic resin, focusing on degree of conversion, surface characteristics, microhardness, adhesion properties, and antimicrobial activity. METHODS: The 3 M Transbond XT resin underwent modification, resulting in three groups (Control, 2.5% addition, 5% addition) with 20 specimens each. Fourier transform infrared spectroscopy assessed monomer conversion. Laser confocal microscopy examined surface roughness, and microhardness was evaluated using Knoop protocols. Shear strength was measured before and after artificial aging on 36 premolar teeth. Microbiological analysis against S. mutans and S. sanguinis was conducted using the agar diffusion method. RESULTS: Degree of conversion remained unaffected by time (P = 0.797), concentration (P = 0.438), or their interaction (P = 0.187). The 5% group exhibited the lowest surface roughness, differing significantly from the control group (P = 0.045). Microhardness showed no significant differences between concentrations (P = 0.740). Shear strength was highest in the control group (P < 0.001). No significant differences were observed in the samples with or without thermocycling (P = 0.759). Microbial analysis revealed concentration-dependent variations, with the 5% group exhibiting the largest inhibition halo (P < 0.001). CONCLUSIONS: Incorporating ß-AgVO3 at 2.5% and 5% concentrations led to significant differences in surface roughness, adhesion, and antimicrobial activity. Overall, resin modification positively impacted degree of conversion, surface characteristics, microhardness, and antimicrobial activity. Further research is warranted to determine clinically optimal concentrations that maximize antimicrobial benefits while minimizing adverse effects on adhesion properties. CLINICAL SIGNIFICANCE: Incorporating ß-AgVO3 into orthodontic resin could improve patient quality of life by prolonging intervention durability and reducing the impact of cariogenic microorganisms. The study's findings also hold promise for the industry, paving the way for the development of new materials with antimicrobial properties for potential applications in the health sector.
Asunto(s)
Ensayo de Materiales , Nanopartículas del Metal , Resistencia al Corte , Plata , Streptococcus mutans , Propiedades de Superficie , Vanadatos , Streptococcus mutans/efectos de los fármacos , Humanos , Plata/química , Plata/farmacología , Vanadatos/química , Vanadatos/farmacología , Nanopartículas del Metal/química , Espectroscopía Infrarroja por Transformada de Fourier , Dureza , Cementos de Resina/química , Streptococcus sanguis/efectos de los fármacos , Soportes Ortodóncicos/microbiología , Microscopía Confocal , Nanoestructuras/química , Adhesión Bacteriana/efectos de los fármacos , Compuestos de Plata/farmacología , Compuestos de Plata/químicaRESUMEN
OBJECTIVES: To incorporate the nanostructured silver vanadate decorated with silver nanoparticles (AgVO3) into denture base materials: heat-cured (HC) and 3D printed (3DP) resins, at concentrations of 2.5 %, 5 %, and 10 %; and to evaluate the antimicrobial activity in two multi-species biofilm: (1) Candida albicans, Candida glabrata, and Streptococcus mutans, (2) Candida albicans, Pseudomonas aeruginosa, and Staphylococcus aureus, and the wettability. METHODS: The AgVO3 was added to the HC powder, and printed samples were coated with 3DP with AgVO3 incorporated. After biofilm formation, the antimicrobial activity was evaluated by colony forming units per milliliter (CFU/mL), metabolic activity, and epifluorescence microscopy. Wettability was assessed by the contact angles with water and artificial saliva. RESULTS: In biofilm (1), HC-5 % and HC-10 % showed activity against S. mutans, HC-10 % against C. glabrata, and HC-10 % and 3DP-10 % had higher CFU/mL of C. albicans. 3DP-5 % had lower metabolic activity than the 3DP control. In biofilm (2), HC-10 % reduced S. aureus and P. aeruginosa, and HC-5 %, 3DP-2.5 %, and 3DP-5 % reduced S. aureus. 3DP incorporated with AgVO3, HC-5 %, and HC-10 % reduced biofilm (2) metabolic activity. 3DP-5 % and 3DP-10 % increased wettability with water and saliva. CONCLUSION: HC-10 % was effective against C. glabrata, S. mutans, P. aeruginosa, and S. aureus, and HC-5 % reduced S. mutans and S. aureus. For 3DP, 2.5 % and 5 % reduced S. aureus. The incorporation of AgVO3 into both resins reduced the metabolic activity of biofilms but had no effect on C. albicans. The wettability of the 3DP with water and saliva increased with the addition of AgVO3. CLINICAL SIGNIFICANCE: The incorporation of silver vanadate into the denture base materials provides antimicrobial efficacy and can prevent the aggravation of oral and systemic diseases. The incorporation of nanomaterials into printed resins is challenging and the coating is an alternative to obtain the inner denture base with antimicrobial effect.
Asunto(s)
Biopelículas , Candida albicans , Bases para Dentadura , Nanopartículas del Metal , Pseudomonas aeruginosa , Plata , Staphylococcus aureus , Streptococcus mutans , Vanadatos , Humectabilidad , Biopelículas/efectos de los fármacos , Streptococcus mutans/efectos de los fármacos , Candida albicans/efectos de los fármacos , Staphylococcus aureus/efectos de los fármacos , Vanadatos/farmacología , Vanadatos/química , Pseudomonas aeruginosa/efectos de los fármacos , Plata/farmacología , Plata/química , Bases para Dentadura/microbiología , Nanopartículas del Metal/química , Antiinfecciosos/farmacología , Candida glabrata/efectos de los fármacos , Impresión Tridimensional , Ensayo de Materiales , Humanos , Nanoestructuras , Compuestos de Plata/farmacología , Compuestos de Plata/química , Materiales Dentales/química , Materiales Dentales/farmacologíaRESUMEN
Graphene compounds are incorporated into polymers in order to improve their mechanical properties and in dentistry this modification favors the clinical performance of these materials. The aim of this review was to evaluate graphene compounds, their concentrations, and their effect on mechanical properties as flexural, tensile, and compressive strength and hardness of polymethylmethacrylate (PMMA) and polyether-ether-ketone (PEEK) for dental application. The search was carried out in two steps in PubMed/Medline, Embase, Scopus, and Web of Science databases. The eligibility criteria included studies that incorporated pure graphene compounds into dental polymers and evaluated their mechanical properties. Were found 4984 results, of which 11 articles were included in this review. Graphene compounds: graphene oxide (GO), reduced graphene oxide (rGO), and graphene nanoplatelets (GNP) were incorporated into PMMA and PEEK, in concentrations ranging from 0.1 to 10 wt%. Concentrations lower than 0.75 wt% of GO in PMMA and 1 wt% of GNP in PEEK resulted in increased flexural, tensile, compression strength, and hardness of these polymers. It was concluded that the incorporation of graphene compounds in low concentrations increases dental polymers' mechanical properties.
RESUMEN
PURPOSE: This study incorporated the nanomaterial, nanostructured silver vanadate decorated with silver nanoparticles (AgVO3), into heat-cured resin (HT) at concentrations of 2.5%, 5%, and 10% and compared the adhesion of multispecies biofilms, surface characteristics, and mechanical properties with conventional heat-cured (HT 0%) and printed resins. MATERIALS AND METHODS: AgVO3 was incorporated in mass into HT powder. A denture base resin was used to obtain printed samples. Adhesion of a multispecies biofilm of Candida albicans, Candida glabrata, and Streptococcus mutans was evaluated by colony-forming units per milliliter (CFU/mL) and metabolic activity. Wettability, roughness, and scanning electron microscopy (SEM) were used to assess the physical characteristics of the surface. The mechanical properties of flexural strength and elastic modulus were tested. RESULTS: HT 10%-AgVO3 showed efficacy against S. mutans; however, it favored C. albicans CFU/mL (P < .05). The printed resin showed a higher metabolically active biofilm than HT 0% (P < .05). There was no difference in wettability or roughness between groups (P > .05). Irregularities on the printed resin surface and pores in HT 5%-AgVO3 were observed by SEM. HT 0% showed the highest flexural strength, and the resins incorporated with AgVO3 had the highest elastic modulus (P < .05). CONCLUSION: The incorporation of 10% AgVO3 into heat-cured resin provided antimicrobial activity against S. mutans in a multispecies biofilm did not affect the roughness or wettability but reduced flexural strength and increased elastic modulus. Printed resin showed higher irregularity, an active biofilm, and lower flexural strength and elastic modulus than heat-cured resin.
RESUMEN
OBJECTIVE: This preliminary study aimed to evaluate the antimicrobial activity, flow and radiopacity of endodontic sealers with nanostructured silver vanadate decorated with silver nanoparticles (AgVO3). METHODS: The minimum inhibitory concentration (MIC) of AgVO3 was evaluated against Enterococcus faecalis, Pseudomonas aeruginosa and Escherichia coli. Specimens were prepared from the following endodontic sealers: AH Plus (DENTSPLY DeTrey GmbH, Konstanz, Germany), Sealapex (Sybron Endo, Orange, CA, USA), Sealer 26 (DENTSPLY, Petrópolis, Brazil) and Endofill (DENTSPLY, Petrópolis, Brazil), with concentrations of 0%, 2.5%, 5% and 10% of AgVO3. Agar diffusion was used to evaluate the materials after 48 hours and 7 days (n=6). Flow (n=6) and radiopacity (n=9) were evaluated. The data were analysed by analysis of variance (ANOVA) and the Tukey honestly significant difference (HSD) (α=0.05). RESULTS: The MIC of AgVO3 was 500 µg/mL for E. faecalis and 31.25 µg/mL for P. aeruginosa and E. coli. The AgVO3 did not influence the antimicrobial activity of AH Plus against E. faecalis (P>0.05) but did promote this activity for Sealapex (P<0.01). Moreover, this activity increased for Endofill from 2.5% and for Sealer 26 from 5% (P<0.05). Against P. aeruginosa, only AH Plus and Endofill 10% inhibited zone formation (P<0.01). The antimicrobial activity of Endofill increased from 2.5% against E. coli (P<0.01). Sealapex 5% and 10% (P<0.01), Sealer 26 10% and AH Plus promoted antimicrobial activity against E. coli. An increase in the zone of inhibition occurred between 48 hours and 7 days in the Sealapex 10% and Endofill 5% groups against E. coli. The flow of AH Plus and Endofill decreased with the increase of AgVO3 (P<0.05), and the flow of Sealer 26 and Sealapex was not affected (P>0.05). The radiopacity of AH Plus increased with AgVO3 (P<0.05). Endofill 5% and 10% did not differ from the control Endofill (P>0.05). The incorporation of AgVO3 did not influence the radiopacity of Sealer 26 (P>0.05). The incorporation of 2.5% and 5% AgVO3 reduced the radiopacity of Sealapex (P<0.05). CONCLUSION: Adding AgVO3 may increase the antimicrobial effect of endodontic sealers without major changes in their physicochemical properties.
RESUMEN
The acrylic resin used for the prosthesis base accumulates biofilm, causing diseases such as stomatitis. The addition of some nanoparticles promotes antimicrobial action. This study incorporated the nanostructured silver vanadate decorated with silver nanoparticles (AgVO3) to the acrylic resin by two methods and evaluated the cytotoxicity for human gingival fibroblasts (HGF) and the released silver and vanadium ions. The concentrations of 0.5, 1, 2.5, and 5% of AgVO3 was incorporated by vacuum spatulation and polymeric film. The vacuum spatulation was performed for 60 s using the Turbomix equipment, and the polymeric film was obtained from the polymer solubilization in chloroform, the film was subjected to a cryogenic grinding, and the powder obtained was manually mixed at the monomer. HGF cell viability was assessed after 24 hours, 7 and 14 days by the MTT assay. The release of silver (Ag) and vanadium (V) ions were quantified by inductively coupled plasma mass spectrometry after 30 days. Kruskal-Wallis and Dunn's test were applied (α = 0.05). The HGF viability was inversely proportional to the incubation time. Both incorporation techniques and the negative and positive control groups presented significant statistical differences (p<0.05). The experimental groups presented no statistical difference compared to the negative control (p>0.05), except the vacuum spatulation group with 5% of AgVO3 that showed greater viability than the negative control (p=0.013) in 24 hours. The release of Ag and V ions was proportional to the concentration of AgVO3 The 5% group presented a significant difference compared to the other groups (p<0.05). In conclusion, the acrylic resin with and without the AgVO3 incorporation had a small cytotoxic potential for HGF in 24 hours, with a lower viability in longer contact times; the release of Ag and V ions was proportional to the concentration of AgVO3, not influencing cell viability. (AU)
A resina acrílica utilizada para a base da prótese acumula biofilme, causando doenças como a estomatite. A adição de algumas nanopartículas promove ação antimicrobiana. Este estudo incorporou o vanadato de prata nanoestruturado decorado com nanopartículas de prata (AgVO3) à resina acrílica por dois métodos e avaliou a citotoxicidade para fibroblastos gengivais humanos (HGF) e os íons prata e vanádio liberados. As concentrações de 0,5%, 1%, 2,5% e 5% de AgVO3 foram incorporadas por espatulação a vácuo e filme polimérico. A espatulação a vácuo foi realizada por 60 s no equipamento Turbomix, e o filme polimérico foi obtido a partir da solubilização do polímero em clorofórmio, o filme foi submetido a uma moagem criogênica e o pó obtido foi misturado manualmente ao monômero. A viabilidade celular de HGF foi avaliada após 24 horas, 7 e 14 dias pelo ensaio de MTT. A liberação de íons prata (Ag) e vanádio (V) foi quantificada por espectrometria de massa com plasma indutivamente acoplado após 30 dias. Os testes de Kruskal-Wallis e Dunn foram aplicados (α=0,05). A viabilidade de HGF foi inversamente proporcional ao tempo de incubação. As técnicas de incorporação e os grupos controle negativo e positivo apresentaram diferença estatisticamente significante (p<0,05). Os grupos experimentais não apresentaram diferença estatística em relação ao controle negativo (p>0,05), exceto o grupo de espatulação a vácuo com 5% de AgVO3 que apresentou maior viabilidade que o controle negativo (p = 0,013) em 24 horas. A liberação de íons Ag e V foi proporcional à concentração de AgVO3. O grupo 5% apresentou diferença significativa em relação aos demais grupos (p <0,05). Em conclusão, a resina acrílica com e sem a incorporação de AgVO3 apresentou um pequeno potencial citotóxico para o HGF em 24 horas, com menor viabilidade nos tempos de maior contato, e a liberação de íons Ag e V foi proporcional à concentração de AgVO3, não influenciando na viabilidade celular. (AU)
RESUMEN
ABSTRACT The aim of this case report was to describe a prosthetic rehabilitation associated with an alternative model of polymer capsule for fixation system of implant-retained overdentures. Patient sought treatment at the clinic of School of Dentistry of Ribeirão Preto, due to lack of retention of their conventional total superior prostheses and inferior overdenture. The initial complaint was clinicallyconfirmed by altered intermaxillary relationships and severe reabsorption of the maxillary crest. In order to restore the function and improve its quality of life, it was proposed a prosthetic solution including implant fixed prosthesis to maxilla and a mandibular overdenture, with ball-type attachments associated with an alternative model of polymer capsule. This treatment was proposed inorder to reestablish the intermaxillary relationships and adequate occlusion, maintain retention and stability of the prosthesis. At the end of treatment and during a one-year follow-up of the case, the patient reported satisfaction and significant improvement in quality of life.
RESUMO O objetivo deste relato de caso foi descrever uma reabilitação protética associada a um modelo alternativo de cápsula polimérica para sistema de fixação de overdentures implantado-retidas. Paciente procurou tratamento na clínica da Faculdade de Odontologia de Ribeirão Preto, devido falta de retenção de suas próteses totais superiores convencionais e overdenture inferior. A queixa inicialfoi clinicamente confirmada por relações intermaxilares alteradas e reabsorção severa da crista maxilar. Para restaurar a função e melhorar sua qualidade de vida, propôs-se como solução protética, a confecção de prótese fixa sobre implantes para a maxila e overdenture mandibular, com acessórios tipo bola associados a um modelo alternativo de cápsula polimérica. Esse tratamento foiproposto a fim de restabelecer as relações intermaxilares e a oclusão adequada, manter a retenção e a estabilidade da prótese. Ao final do tratamento e durante o acompanhamento de um ano do caso, o paciente relatou satisfação e melhora significativa na qualidade de vida.
RESUMEN
Objetivo: O objetivo desse trabalho foi descrever um caso clínico, realizado na Faculdade de Odontologia de Ribeirão Preto Universidade de São Paulo, com adaptação da prótese parcial removível do paciente em prótese total provisória de transição, após a instalação de implantes odontológicos. Material e método: O paciente era usuário de prótese parcial removível associada à prótese parcial fixa inferior, cujos pilares eram os elementos 42 e 44. Ambos os dentes apresentavam indicação para extração. Após a remoção da prótese fixa e extração dos dentes 42 e 44, foram instalados quatro implantes na região anterior da mandíbula, e confeccionada uma prótese total de transição, a partir da prótese parcial removível do paciente. Após o período de osseointegração, a prótese sobre implantes definitiva foi confeccionada. Conclusão: A adaptação de prótese parcial removível em prótese total provisória de transição reduz o tempo dos procedimentos clínicos e o custo do tratamento, permitindo ao paciente a manutenção de suas funções orais, até a confecção da prótese definitiva.
Objective: The aim of this study was to describe a case, performed at the Dental School of Ribeirão Preto - University of São Paulo, with adaptation of the removable partial denture of the patient in a transitional denture after the installation of dental implants. Material and Methods: Patient was a user of a mandibular removable partial denture associated with fixed partial dentures, whose pillars were teeth 42 and 44, both indicated for extraction. After removal of the fixed partial dentures and extraction of 42 and 44, four implants were installed in the anterior region of the mandible, and a transitional denture was made from the patient's removable partial denture. After the period of osseointegration, the definitive implant prosthesis was made. Conclusions: The adaptation of a removable partial denture in a transitional denture reduces the time of the clinical procedures and the cost of the treatment, allowing to the patient to maintain his/her oral functions, until the definitive implant prosthesis is made.