RESUMEN
Alicyclobacillus acidocaldarius, a thermoacidophilic bacterium, has a repertoire of thermo- and acid-stable enzymes that deconstruct lignocellulosic compounds. The work presented here describes the ability of A. acidocaldarius to reduce the concentration of the phenolic compounds: phenol, ferulic acid, ρ-coumaric acid and sinapinic acid during growth conditions. The extent and rate of the removal of these compounds were significantly increased by the presence of micro-molar copper concentrations, suggesting activity by copper oxidases that have been identified in the genome of A. acidocaldarius. Substrate removal kinetics was first order for phenol, ferulic acid, ρ-coumaric acid and sinapinic acid in the presence of 50 µM copper sulfate. In addition, laccase enzyme assays of cellular protein fractions suggested significant activity on a lignin analog between the temperatures of 45 and 90 °C. This work shows the potential for A. acidocaldarius to degrade phenolic compounds, demonstrating potential relevance to biofuel production and other industrial processes.
Asunto(s)
Alicyclobacillus/metabolismo , Lignina/metabolismo , Fenoles/metabolismo , Alicyclobacillus/enzimología , Alicyclobacillus/crecimiento & desarrollo , Biocombustibles , Sulfato de Cobre/farmacología , Ácidos Cumáricos/metabolismo , Cinética , Lacasa/metabolismo , Lignina/química , Oxidorreductasas/metabolismo , Fenol/metabolismo , TemperaturaRESUMEN
Biofuels made from biomass and waste residues will largely contribute to United States' 2050 decarbonization goal in the aviation sector. While cellulosic biofuels have the potential fuel performance equivalent to petroleum-based jet fuel, the biofuel industry needs to overcome the supply chain barrier caused by temporal and spatial variability of biomass yield and quality. This study highlights the importance of incorporating spatial and temporal variability during biomass supply chain planning via optimization modeling that incorporates 10 years of drought index data, a primary factor contributing to yield and quality variability. The results imply that the cost of delivering biomass to biorefinery may be significantly underestimated if the multi-year temporal and spatial variation in biomass yield and quality is not captured. For long term sustainable biorefinery operations, the industry should optimize supply chain strategy by studying the variability of yield and quality of biomass in their supply sheds.
RESUMEN
Pelleting of lignocellulosic biomass to improve its transportation, storage and handling impacts subsequent processing and conversion. This work reports the role of high moisture pelleting in the enzymatic digestibility of corn stover prior to pretreatment, together with associated substrate characteristics. Pelleting increases the digestibility of unpretreated corn stover, from 8.2 to 15.5% glucan conversion, at 5% solid loading using 1 FPU Cellic® CTec2 per g solids. Compositional analysis indicates that loose and pelleted corn stover have similar non-dissolvable compositions, although their extractives are different. Enzymatic hydrolysis of corn stover after size reduction to normalize particle sizes and removal of extractives confirms that pelleting improves corn stover digestibility. Such differences may be explained by the decreased particle size, improved substrate accessibility, and hydrolysis of cross-linking structures induced by pelleting. These findings are useful for the development of processing schemes for sustainable and efficient use of lignocellulose.
Asunto(s)
Celulasa , Zea mays , Zea mays/química , Celulasa/química , Hidrólisis , BiomasaRESUMEN
The movement of solid material into and between unit operations within a biorefinery is a bottleneck in reaching design capacity, with formation of biomass slurries needed to introduce feedstock. Corn stover slurries have been achieved from dilute acid, pretreated materials resulting in slurry concentrations of up to about 150 g/L, above which flowability is compromised. We report a new strategy to liquefy corn stover at higher solids concentration (300 g/L) by initially cooking it with the enzyme mimetic maleic acid at 40 mM and 150 °C. This is followed by 6 h of enzymatic modification at 1 FPU (2.2 mg protein)/g solids, resulting in a yield stress of 171 Pa after 6 h and 58 Pa in 48 h compared to 6806 Pa for untreated stover. Mimetic treatment of corn stover pellets minimizes the inhibitory effect of xylo-oligomers on hydrolytic enzymes. This strategy allows for the delivery of solid lignocellulosic slurry into a pretreatment reactor by pumping, improving operability of a biorefinery.
Asunto(s)
Ácidos , Zea mays , Biomasa , HidrólisisRESUMEN
Crop residues collected during or after grain harvest are available once per year and must be stored for extended periods. The combination of air, high moisture, and high microbial loads leads to shrinkage during storage and risk of spontaneous ignition. Ensiling is a wet preservation method that could be used to store these residues stably. To economically adapt ensiling to biomass that is harvested after it has senesced, the need for nutrient, moisture, and microbial additions must be determined. We tested the ensiling of senesced wheat straw in sealed columns for 83 d. The straw was inoculated with Lactobacillus plantarum and amended with several levels of water and free sugars. The ability to stabilize the straw polysaccharides was strongly influenced by both moisture and free sugars. Without the addition of sugar, the pH increased from 5.2 to as much as 9.1, depending on moisture level, and losses of 22% of the cellulose and 21% of the hemicellulose were observed. By contrast, when sufficient sugars were added and interstitial water was maintained, a final pH of 4.0 was attainable, with correspondingly low (<5%) losses of cellulose and hemicellulose. The results show that ensiling should be considered a promising method for stable storage of wet biorefinery feedstocks.
Asunto(s)
Envejecimiento/fisiología , Celulosa/metabolismo , Lactobacillus/fisiología , Componentes Aéreos de las Plantas/microbiología , Componentes Aéreos de las Plantas/fisiología , Ensilaje , Agua/metabolismo , Conservación de los Recursos Naturales , Residuos Industriales/prevención & control , Componentes Aéreos de las Plantas/químicaRESUMEN
Silica and alkali metals in wheat straw limit its use for bioenergy and gasification. Slag deposits occur via the eutectic melting of SiO2 with K2O, trapping chlorides at surfaces and causing corrosion. A minimum melting point of 950 degrees C is desirable, corresponding to an SiO2:K2O weight ratio of about 3:1. Mild chemical treatments were used to reduce Si, K, and Cl, while varying temperature, concentration, % solids, and time. Dilute acid was more effective at removing K and Cl, while dilute alkali was more effective for Si. Reduction of minerals in this manner may prove economical for increasing utilization of the straw for combustion or gasification.
Asunto(s)
Alimentación Animal , Metales/aislamiento & purificación , Dióxido de Silicio/aislamiento & purificación , Triticum/química , Agricultura/métodos , Biotecnología/métodos , Carbohidratos/análisis , Celulosa/análisis , Cloruros/aislamiento & purificación , Lignina/análisis , Metalurgia/métodosRESUMEN
The biosurfactant surfactin has the potential to aid in the recovery of subsurface organic contaminants (environmental remediation) or crude oils (oil recovery). However, high medium and purification costs limit its use in these high-volume applications. In previous work, we showed that surfactin can be produced from an inexpensive low-solids (LS) potato process effluent with minimal amendments or pretreatments. Previous research has also shown that 95% or more of the surfactin in Bacillus subtilis cultures can be recovered by foam fractionation. In this work, we present the results of research to integrate surfactin production with foam fractionation. Experiments were performed in an airlift reactor, with continuous collection of the foam through a tube at the top of the column. Preliminary results using both purified potato starch and unamended low-solids potato process effluent as substrates for surfactin production indicate that the process is oxygen limited and that recalcitrant indigenous bacteria in the potato process effluent may hamper continuous surfactin production.
Asunto(s)
Bacillus subtilis/metabolismo , Proteínas Bacterianas/biosíntesis , Péptidos Cíclicos , Solanum tuberosum/microbiología , Proteínas Bacterianas/aislamiento & purificación , Reactores Biológicos , Cromatografía Líquida de Alta Presión , Diseño de Equipo , Concentración de Iones de Hidrógeno , Cinética , Lipopéptidos , Lipoproteínas/biosíntesisRESUMEN
Straw utilization for composites is limited by poor resin and polymer penetration, and excessive resin consumption owing to the straw cuticle, fines, and lignin-hemicellulose matrix. White-rot fungi degrade these components of straw and could, therefore, potentially be used to improve resin penetration and resin binding without the use of physical or chemical pretreatments. Although long treatment times and large footprints the limit use of fungal treatments on a large scale, distributed fungal pretreatments could alleviate land requirements. In this article, we present progress toward the development of a passive fungal straw upgrading system utilizing whiterot fungi.
Asunto(s)
Resinas Compuestas/análisis , Pleurotus/metabolismo , Triticum/metabolismo , Reactores Biológicos , Biotecnología/métodos , Lignina/metabolismo , Nitrógeno/metabolismo , Pleurotus/crecimiento & desarrollo , Polisacáridos/metabolismoRESUMEN
In this paper, we describe ongoing efforts to solve challenges to using straw for bioenergy and bioproducts. Among these, silica in straw forms a low-melting eutectic with potassium, causing slag deposits, and chlorides cause corrosion beneath the deposits. Straw consists principally of stems, leaves, sheaths, nodes, awns, and chaff. Leaves and sheaths are higher in silica, while chaff, leaves, and nodes are the primary sources of fines. Our approach to reducing silica is to selectively harvest the straw stems using an in-field physical separation, leaving the remaining components in the field to build soil organic matter and contribute soil nutrients.
Asunto(s)
Agricultura/métodos , Tallos de la Planta/química , Dióxido de Silicio/aislamiento & purificación , Triticum/química , Carbohidratos/análisis , Hidrólisis , Hojas de la Planta/química , Triticum/clasificaciónRESUMEN
Combining biologic pretreatment with storage is an innovative approach for improving feedstock characteristics and cost, but the magnitude of responses of such systems to upsets is unknown. Unsterile wheat straw stems were upgraded for 12 wk with Pleurotus ostreatus at constant temperature to estimate the variation in final compositions with variations in initial moisture and inoculum. Degradation rates and conversions increased with both moisture and inoculum. A regression analysis indicated that system performance was quite stable with respect to inoculum and moisture content after 6 wk of treatment. Scale-up by 150x indicated that system stability and final straw composition are sensitive to inoculum source, history, and inoculation method. Comparative testing of straw-thermoplastic composites produced from upgraded stems is under way.
Asunto(s)
Biotecnología/métodos , Triticum , Alimentación Animal , Celulosa , Fermentación , Glucanos/química , Pleurotus/metabolismo , Polisacáridos , Análisis de Regresión , Sensibilidad y Especificidad , Ensilaje , Factores de Tiempo , Agua/química , Xilanos/químicaRESUMEN
Enzymatic preprocessing of lignocellulosic biomass in dry storage systems has the potential to improve feedstock characteristics and lower ethanol production costs. To assess the potential for endoxylanase activity at low water contents, endoxylanase activity was tested using a refined wheat arabinoxylan substrate and three commercial endoxylanases over the water activity range 0.21-1.0, corresponding to water contents of 5% to >60% (dry basis). Homogeneously mixed dry samples were prepared at a fixed enzyme to substrate ratio and incubated in chambers at a variety of fixed water activities. Replicates were sacrificed periodically, and endoxylanase activity was quantified as an increase in reducing sugar relative to desiccant-stored controls. Endoxylanase activity was observed at water activities over 0.91 in all enzyme preparations in less than 4 days and at a water activity of 0.59 in less than 1 week in two preparations. Endoxylanase activity after storage was confirmed for selected desiccant-stored controls by incubation at 100% relative humidity. Water content to water activity relationships were determined for three lignocellulosic substrates, and results indicate that two endoxylanase preparations retained limited activity as low as 7% to 13% water content (dry basis), which is well within the range of water contents representative of dry biomass storage. Future work will examine the effects of endoxylanase activity toward substrates such as corn stover, wheat straw, and switchgrass in low water content environments.
Asunto(s)
Biomasa , Biotecnología/métodos , Endo-1,4-beta Xilanasas/metabolismo , Lignina/metabolismo , Solubilidad , Triticum/enzimología , Viscosidad , Agua/químicaRESUMEN
Efficient utilization of carbon inputs is critical to the economic viability of the current forest products sector. Input carbon losses occur in various locations within a pulp mill, including losses as volatile organics and wastewater. Opportunities exist to capture this carbon in the form of value-added products such as biodegradable polymers. Waste-activated sludge from a pulp mill wastewater facility was enriched for 80 days for a methanol-utilizing consortium with the goal of using this consortium to produce biopolymers from methanol-rich pulp mill waste streams. Five enrichment conditions were utilized: three high-methanol streams from the kraft mill foul condensate system, one methanol-amended stream from the mill wastewater plant, and one methanol-only enrichment. Enrichment reactors were operated aerobically in sequencing batch mode at neutral pH and 25 degrees C with a hydraulic residence time and a solids retention time of 4 days. Non-enriched waste activated sludge did not consume methanol or reduce chemical oxygen demand. With enrichment, however, the chemical oxygen demand reduction over 24-h feed/decant cycles ranged from 79 to 89%, and methanol concentrations dropped below method detection limits. Neither the non-enriched waste-activated sludge nor any of the enrichment cultures accumulated polyhydroxyalkanoates (PHAs) under conditions of nitrogen sufficiency. Similarly, the non-enriched waste activated sludge did not accumulate PHAs under nitrogen-limited conditions. By contrast, enriched cultures accumulated PHAs to nearly 14% on a dry weight basis under nitrogen-limited conditions. This indicates that selectively enriched pulp mill waste activated sludge can serve as an inoculum for PHA production from methanol-rich pulp mill effluents.
Asunto(s)
Bacterias/aislamiento & purificación , Bacterias/metabolismo , Reactores Biológicos/microbiología , Técnicas de Cultivo de Célula/métodos , Residuos Industriales/prevención & control , Metanol/metabolismo , Papel , Aguas del Alcantarillado/microbiologíaRESUMEN
Polyhydroxyalkanoates (PHAs) represent an environmentally effective alternative to synthetic thermoplastics; however, current production practices are not sustainable. In this study, PHA production was accomplished in sequencing batch bioreactors utilizing real wastewaters and mixed microbial consortia from municipal activated sludge as inoculum. Polymer production reached 85, 53, and 10% of the cell dry weight from methanol-enriched pulp and paper mill foul condensate, fermented municipal primary solids, and biodiesel wastewater, respectively. Using denaturing gradient gel electrophoresis of 16S-rDNA from polymerase chain reaction-amplified DNA extracts, distinctly different communities were observed between and within wastewaters following enrichment. Most importantly, functional stability was maintained despite differing and contrasting microbial populations.