RESUMEN
Available measurement methods for nanomaterials are based on very different measurement principles and hence produce different values when used on aggregated nanoparticle dispersions. This paper provides a solution for relating measurements of nanomaterials comprised of nanoparticle aggregates determined by different techniques using a uniform expression of a mass equivalent diameter (MED). The obtained solution is used to transform into MED the size distributions of the same sample of synthetic amorphous silica (nanomaterial comprising aggregated nanoparticles) measured by six different techniques: scanning electron microscopy in both high vacuum (SEM) and liquid cell setup (Wet-SEM); gas-phase electrophoretic mobility molecular analyzer (GEMMA); centrifugal liquid sedimentation (CLS); nanoparticle tracking analysis (NTA); and asymmetric flow field flow fractionation with inductively coupled plasma mass spectrometry detection (AF4-ICP-MS). Transformed size distributions are then compared between the methods and conclusions drawn on methods' measurement accuracy, limits of detection and quantification related to the synthetic amorphous silca's size. Two out of the six tested methods (GEMMA and AF4-ICP-MS) cross validate the MED distributions between each other, providing a true measurement. The measurement accuracy of other four techniques is shown to be compromised either by the high limit of detection and quantification (CLS, NTA, Wet-SEM) or the sample preparation that is biased by increased retention of smaller nanomaterials (SEM). This study thereby presents a successful and conclusive cross-method comparison of size distribution measurements of aggregated nanomaterials. The authors recommend the uniform MED size expression for application in nanomaterial risk assessment studies and clarifications in current regulations and definitions concerning nanomaterials.
RESUMEN
The amount of scientific literature on (Geographic) Object-based Image Analysis - GEOBIA has been and still is sharply increasing. These approaches to analysing imagery have antecedents in earlier research on image segmentation and use GIS-like spatial analysis within classification and feature extraction approaches. This article investigates these development and its implications and asks whether or not this is a new paradigm in remote sensing and Geographic Information Science (GIScience). We first discuss several limitations of prevailing per-pixel methods when applied to high resolution images. Then we explore the paradigm concept developed by Kuhn (1962) and discuss whether GEOBIA can be regarded as a paradigm according to this definition. We crystallize core concepts of GEOBIA, including the role of objects, of ontologies and the multiplicity of scales and we discuss how these conceptual developments support important methods in remote sensing such as change detection and accuracy assessment. The ramifications of the different theoretical foundations between the 'per-pixel paradigm' and GEOBIA are analysed, as are some of the challenges along this path from pixels, to objects, to geo-intelligence. Based on several paradigm indications as defined by Kuhn and based on an analysis of peer-reviewed scientific literature we conclude that GEOBIA is a new and evolving paradigm.
RESUMEN
Traditional geographic information system (GIS)-overlay routines usually build on relatively simple data models. Topology is - if at all - calculated on the fly for very specific tasks only. If, for example, a change comparison is conducted between two or more polygon layers, the result leads mostly to a complete and also very complex from-to class intersection. A lot of additional processing steps need to be performed to arrive at aggregated and meaningful results. To overcome this problem a new, automated geospatial overlay method in a topologically enabled (multi-scale) framework is presented. The implementation works with polygon and raster layers and uses a multi-scale vector/raster data model developed in the object-based image analysis software eCognition (Trimble Geospatial Imaging, Munich, Germany). Advantages are the use of the software inherent topological relationships in an object-by-object comparison, addressing some of the basic concepts of object-oriented data modeling such as classification, generalization, and aggregation. Results can easily be aggregated to a change-detection layer; change dependencies and the definition of different change classes are interactively possible through the use of a class hierarchy and its inheritance (parent-child class relationships). Implementation is exemplarily shown for a change comparison of CORINE Land Cover data sets. The result is a flexible and transferable solution which is - if parameterized once - fully automated.
RESUMEN
Accurately characterizing clouds and their shadows is a long-standing problem in the Earth Observation community. Recent works showcase the necessity to improve cloud detection methods for imagery acquired by the Sentinel-2 satellites. However, the lack of consensus and transparency in existing reference datasets hampers the benchmarking of current cloud detection methods. Exploiting the analysis-ready data offered by the Copernicus program, we created CloudSEN12, a new multi-temporal global dataset to foster research in cloud and cloud shadow detection. CloudSEN12 has 49,400 image patches, including (1) Sentinel-2 level-1C and level-2A multi-spectral data, (2) Sentinel-1 synthetic aperture radar data, (3) auxiliary remote sensing products, (4) different hand-crafted annotations to label the presence of thick and thin clouds and cloud shadows, and (5) the results from eight state-of-the-art cloud detection algorithms. At present, CloudSEN12 exceeds all previous efforts in terms of annotation richness, scene variability, geographic distribution, metadata complexity, quality control, and number of samples.
RESUMEN
Within the constraints of operational work supporting humanitarian organizations in their response to the Covid-19 pandemic, we conducted building extraction for Khartoum, Sudan. We extracted approximately 1.2 million dwellings and buildings, using a Mask R-CNN deep learning approach from a Pléiades very high-resolution satellite image with 0.5 m pixel resolution. Starting from an untrained network, we digitized a few hundred samples and iteratively increased the number of samples by validating initial classification results and adding them to the sample collection. We were able to strike a balance between the need for timely information and the accuracy of the result by combining the output from three different models, each aiming at distinctive types of buildings, in a post-processing workflow. We obtained a recall of 0.78, precision of 0.77 and F 1 score of 0.78, and were able to deliver first results in only 10 days after the initial request. The procedure shows the great potential of convolutional neural network frameworks in combination with GIS routines for dwelling extraction even in an operational setting.
RESUMEN
Sentinel-2 scenes are increasingly being used in operational Earth observation (EO) applications at regional, continental and global scales, in near-real time applications, and with multi-temporal approaches. On a broader scale, they are therefore one of the most important facilitators of the Digital Earth. However, the data quality and availability are not spatially and temporally homogeneous due to effects related to cloudiness, the position on the Earth or the acquisition plan. The spatio-temporal inhomogeneity of the underlying data may therefore affect any big remote sensing analysis and is important to consider. This study presents an assessment of the metadata for all accessible Sentinel-2 Level-1C scenes acquired in 2017, enabling the spatio-temporal coverage and availability to be quantified, including scene availability and cloudiness. Spatial exploratory analysis of the global, multi-temporal metadata also reveals that higher acquisition frequencies do not necessarily yield more cloud-free scenes and exposes metadata quality issues, e.g. systematically incorrect cloud cover estimation in high, non-vegetated altitudes. The continuously updated datasets and analysis results are accessible as a Web application called EO-Compass. It contributes to a better understanding and selection of Sentinel-2 scenes, and improves the planning and interpretation of remote sensing analyses.
RESUMEN
Turning Earth observation (EO) data consistently and systematically into valuable global information layers is an ongoing challenge for the EO community. Recently, the term 'big Earth data' emerged to describe massive EO datasets that confronts analysts and their traditional workflows with a range of challenges. We argue that the altered circumstances must be actively intercepted by an evolution of EO to revolutionise their application in various domains. The disruptive element is that analysts and end-users increasingly rely on Web-based workflows. In this contribution we study selected systems and portals, put them in the context of challenges and opportunities and highlight selected shortcomings and possible future developments that we consider relevant for the imminent uptake of big Earth data.
RESUMEN
ESA defines as Earth Observation (EO) Level 2 information product a single-date multi-spectral (MS) image corrected for atmospheric, adjacency and topographic effects, stacked with its data-derived scene classification map (SCM), whose legend includes quality layers cloud and cloud-shadow. No ESA EO Level 2 product has ever been systematically generated at the ground segment. To fill the information gap from EO big data to ESA EO Level 2 product in compliance with the GEO-CEOS stage 4 validation (Val) guidelines, an off-the-shelf Satellite Image Automatic Mapper (SIAM) lightweight computer program was validated by independent means on an annual 30 m resolution Web-Enabled Landsat Data (WELD) image composite time-series of the conterminous U.S. (CONUS) for the years 2006-2009. The SIAM core is a prior knowledge-based decision tree for MS reflectance space hyperpolyhedralization into static color names. Typically, a vocabulary of MS color names in a MS data (hyper)cube and a dictionary of land cover (LC) class names in the scene-domain do not coincide and must be harmonized (reconciled). The present Part 1-Theory provides the multidisciplinary background of a priori color naming. The subsequent Part 2-Validation accomplishes a GEO-CEOS stage 4 Val of the test SIAM-WELD annual map time-series in comparison with a reference 30 m resolution 16-class USGS National Land Cover Data 2006 map, based on an original protocol for wall-to-wall thematic map quality assessment without sampling, where the test and reference maps feature the same spatial resolution and spatial extent, but whose legends differ and must be harmonized.
RESUMEN
ESA defines as Earth Observation (EO) Level 2 information product a multi-spectral (MS) image corrected for atmospheric, adjacency, and topographic effects, stacked with its data-derived scene classification map (SCM), whose legend includes quality layers cloud and cloud-shadow. No ESA EO Level 2 product has ever been systematically generated at the ground segment. To fill the information gap from EO big data to ESA EO Level 2 product in compliance with the GEO-CEOS stage 4 validation (Val) guidelines, an off-the-shelf Satellite Image Automatic Mapper (SIAM) lightweight computer program was selected to be validated by independent means on an annual 30 m resolution Web-Enabled Landsat Data (WELD) image composite time-series of the conterminous U.S. (CONUS) for the years 2006 to 2009. The SIAM core is a prior knowledge-based decision tree for MS reflectance space hyperpolyhedralization into static (non-adaptive to data) color names. For the sake of readability, this paper was split into two. The present Part 2-Validation-accomplishes a GEO-CEOS stage 4 Val of the test SIAM-WELD annual map time-series in comparison with a reference 30 m resolution 16-class USGS National Land Cover Data (NLCD) 2006 map. These test and reference map pairs feature the same spatial resolution and spatial extent, but their legends differ and must be harmonized, in agreement with the previous Part 1 - Theory. Conclusions are that SIAM systematically delivers an ESA EO Level 2 SCM product instantiation whose legend complies with the standard 2-level 4-class FAO Land Cover Classification System (LCCS) Dichotomous Phase (DP) taxonomy.
RESUMEN
The challenge of enabling syntactic and semantic interoperability for comprehensive and reproducible online processing of big Earth observation (EO) data is still unsolved. Supporting both types of interoperability is one of the requirements to efficiently extract valuable information from the large amount of available multi-temporal gridded data sets. The proposed system wraps world models, (semantic interoperability) into OGC Web Processing Services (syntactic interoperability) for semantic online analyses. World models describe spatio-temporal entities and their relationships in a formal way. The proposed system serves as enabler for (1) technical interoperability using a standardised interface to be used by all types of clients and (2) allowing experts from different domains to develop complex analyses together as collaborative effort. Users are connecting the world models online to the data, which are maintained in a centralised storage as 3D spatio-temporal data cubes. It allows also non-experts to extract valuable information from EO data because data management, low-level interactions or specific software issues can be ignored. We discuss the concept of the proposed system, provide a technical implementation example and describe three use cases for extracting changes from EO images and demonstrate the usability also for non-EO, gridded, multi-temporal data sets (CORINE land cover).
RESUMEN
Spatiotemporal analytics of multi-source Earth observation (EO) big data is a pre-condition for semantic content-based image retrieval (SCBIR). As a proof of concept, an innovative EO semantic querying (EO-SQ) subsystem was designed and prototypically implemented in series with an EO image understanding (EO-IU) subsystem. The EO-IU subsystem is automatically generating ESA Level 2 products (scene classification map, up to basic land cover units) from optical satellite data. The EO-SQ subsystem comprises a graphical user interface (GUI) and an array database embedded in a client server model. In the array database, all EO images are stored as a space-time data cube together with their Level 2 products generated by the EO-IU subsystem. The GUI allows users to (a) develop a conceptual world model based on a graphically supported query pipeline as a combination of spatial and temporal operators and/or standard algorithms and (b) create, save and share within the client-server architecture complex semantic queries/decision rules, suitable for SCBIR and/or spatiotemporal EO image analytics, consistent with the conceptual world model.