The benefits of compression methods in acoustic coherence tomography.

Pulse compression methods improve the quality of ultrasonic medical images. In comparison with standard broadband pulse techniques, these methods enhance the contrast-to-noise ratio (CNR) and increase the probing depth without any perceptible loss of spatial resolution. The Golay compression technique is analyzed here in the context of ultrasonic computed tomography, first on a one-dimensional target and second on a very low-contrast phantom probed using a half-ring array tomograph. The imaging performances were assessed based on the image CNR. The improvement obtained (up to 40%) depends, however, on the number of coherently associated diffraction projections. Beyond a certain number, few advantages were observed. Advances in ultrasound computed tomography suggest that pulse compression methods should provide a useful means of optimizing the trade-off between the image quality and the probing sampling density.

Electrical Evidence of the Tunable Electrical Bragg Bandgaps in Piezoelectric Plates.

A piezoelectric plate, poled along its thickness and supporting on its top and bottom surfaces a periodic grating of electrodes, is considered. An analytical model allowing band structure calculation is derived for the first symmetrical mode propagating along the length of the plate. Analytical results show that an electrical Bragg (EB) bandgap can be observed for this mode, depending on the electrical boundary conditions applied on the electrodes. This "EB bandgap" is associated with a discontinuity of the electric field between two successive unit cells. These results are validated with the numerical simulations based on the finite element method. Analytical and numerical results prove that the EB bandgap is highly tunable and can be optimized by changing the crystallographic orientation of the material. A simple tunable filter exploiting this bandgap is designed and fabricated. Experimental results of electrical impedance and electrical potential at the output together with a scanning laser vibrometer analysis are presented, which confirm the theoretical predictions.