A DNA origami rotary ratchet motor.

To impart directionality to the motions of a molecular mechanism, one must overcome the random thermal forces that are ubiquitous on such small scales and in liquid solution at ambient temperature. In equilibrium without energy supply, directional motion cannot be sustained without violating the laws of thermodynamics. Under conditions away from thermodynamic equilibrium, directional motion may be achieved within the framework of Brownian ratchets, which are diffusive mechanisms that have broken inversion symmetry1-5. Ratcheting is thought to underpin the function of many natural biological motors, such as the F1F0-ATPase6-8, and it has been demonstrated experimentally in synthetic microscale systems (for example, to our knowledge, first in ref. 3) and also in artificial molecular motors created by organic chemical synthesis9-12. DNA nanotechnology13 has yielded a variety of nanoscale mechanisms, including pivots, hinges, crank sliders and rotary systems14-17, which can adopt different configurations, for example, triggered by strand-displacement reactions18,19 or by changing environmental parameters such as pH, ionic strength, temperature, external fields and by coupling their motions to those of natural motor proteins20-26. This previous work and considering low-Reynolds-number dynamics and inherent stochasticity27,28 led us to develop a nanoscale rotary motor built from DNA origami that is driven by ratcheting and whose mechanical capabilities approach those of biological motors such as F1F0-ATPase.

From Brownian to Deterministic Motor Movement in a DNA-Based Molecular Rotor.

Molecular devices that have an anisotropic periodic potential landscape can be operated as Brownian motors. When the potential landscape is cyclically switched with an external force, such devices can harness random Brownian fluctuations to generate a directed motion. Recently, directed Brownian motor-like rotatory movement was demonstrated with an electrically switched DNA origami rotor with designed ratchet-like obstacles. Here, we demonstrate that the intrinsic anisotropy of DNA origami rotors is also sufficient to result in motor movement. We show that for low amplitudes of an external switching field, such devices operate as Brownian motors, while at higher amplitudes, they behave deterministically as overdamped electrical motors. We characterize the amplitude and frequency dependence of the movements, showing that after an initial steep rise, the angular speed peaks and drops for excessive driving amplitudes and frequencies. The rotor movement can be well described by a simple stochastic model of the system.

Low-Cost Particulate Matter Sensors for Monitoring Residential Wood Burning.

Conventional monitoring systems for air quality, such as reference stations, provide reliable pollution data in urban settings but only at relatively low spatial density. This study explores the potential of low-cost sensor systems (LCSs) deployed at homes of residents to enhance the monitoring of urban air pollution caused by residential wood burning. We established a network of 28 Airly (Airly-GSM-1, SP. Z o.o., Poland) LCSs in Kristiansand, Norway, over two winters (2021-2022). To assess performance, a gravimetric Kleinfiltergerät measured the fine particle mass concentration (PM2.5) in the garden of one participant's house for 4 weeks. Results showed a sensor-to-reference correlation equal to 0.86 for raw PM2.5 measurements at daily resolution (bias/RMSE: 9.45/11.65 µg m-3). High-resolution air quality maps at a 100 m resolution were produced by combining the output of an air quality model (uEMEP) using data assimilation techniques with the network data that were corrected and calibrated by using a proposed five-step network data processing scheme. Leave-one-out cross-validation demonstrated that data assimilation reduced the model's RMSE, MAE, and bias by 44-56, 38-48, and 41-52%, respectively.

Energy landscapes of rotary DNA origami devices determined by fluorescence particle tracking.

Biomolecular nanomechanical devices are of great interest as tools for the processing and manipulation of molecules, thereby mimicking the function of nature's enzymes. DNA nanotechnology provides the capability to build molecular analogs of mechanical machine elements such as joints and hinges via sequence-programmable self-assembly, which are otherwise known from traditional mechanical engineering. Relative to their size, these molecular machine elements typically do not reach the same relative precision and reproducibility that we know from their macroscopic counterparts; however, as they are scaled down to molecular sizes, physical effects typically not considered by mechanical engineers such as Brownian motion, intramolecular forces, and the molecular roughness of the devices begin to dominate their behavior. In order to investigate the effect of different design choices on the roughness of the mechanical energy landscapes of DNA nanodevices in greater detail, we here study an exemplary DNA origami-based structure, a modularly designed rotor-stator arrangement, which resembles a rotatable nanorobotic arm. Using fluorescence tracking microscopy, we follow the motion of individual rotors and record their corresponding energy landscapes. We then utilize the modular construction of the device to exchange its constituent parts individually and systematically test the effect of different design variants on the movement patterns. This allows us to identify the design parameters that most strongly affect the shape of the energy landscapes of the systems. Taking into account these insights, we are able to create devices with significantly flatter energy landscapes, which translates to mechanical nanodevices with improved performance and behaviors more closely resembling those of their macroscopic counterparts.

A Small Cationic Organo-Copper Cluster as Thermally Robust Highly Photo- and Electroluminescent Material.

Organic light-emitting diodes (OLEDs) are revolutionizing display applications. In this aspect, luminescent complexes of precious metals such as iridium, platinum, or ruthenium still playing a significant role. Emissive compounds of earth-abundant copper with equivalent performance are desired for practical, large-scale applications such as solid-state lighting and displays. Copper(I)-based emitters are well-known to suffer from weak spin-orbit coupling and a high reorganization energy upon photoexcitation. Here we report a cationic organo-copper cluster [Cu4(PCP)3]+ (PCP = 2,6-(PPh2)2C6H3) that features suppressed nonradiative decays, giving rise to a robust narrow-band green luminophore with a photoluminescent (PL) efficiency up to 93%. PL decay kinetics corroborated by DFT calculations reveal a complex emission mechanism involving contributions of both thermally activated delayed fluorescence and phosphorescence. This robust compound was solution-processed into a thin film in prototype OLEDs with external quantum efficiency up to 11% and a narrow emission bandwidth (65 nm fwhm).

Tri- and Tetranuclear Metal-String Complexes with Metallophilic d10 -d10 Interactions.

The reaction of 2,6-F2 C6 H3 SiMe3 with Ph2 PLi provided 2,6-(Ph2 P)2 C6 H3 SiMe3 (1), which can be regarded as precursor for the novel anionic tridentate ligand [2,6-(Ph2 P)2 C6 H3 ]- (PCP)- . The reaction of 1 with [AuCl(tht)] (tht=tetrahydrothiophene) afforded 2,6-(Ph2 PAuCl)2 C6 H3 SiMe3 (2). The subsequent reaction of 2 with CsF proceeded with elimination of Me3 SiF and yielded the neutral tetranuclear complex linear-[Au4 Cl2 (PCP)2 ] (3) comprising a string-like arrangement of four Au atoms. Upon chloride abstraction from 3 with NaBArF 4 (ArF =3,5-(CF3 )2 C6 H3 ) in the presence of tht, the formation of the dicationic tetranuclear complex linear-[Au4 (PCP)2 (tht)2 ](BArF 4 )2 (4) was observed, in which the string-like structural motif is retained. Irradiation of 4 with UV light triggered a facile rearrangement in solution giving rise to the dicationic tetranuclear complex cyclo-[Au4 (PCP)2 (tht)2 ](BArF 4 ) (5), which comprises a rhomboidal motif of four Au atoms. In 3-5, the Au atoms are associated by a number of significant aurophilic interactions. The atom-economic and selective reaction of 3 with HgCl2 yielded the neutral trinuclear bimetallic complex [HgAu2 Cl3 (PCP)] (6) comprising significant metallophilic interactions between the Au and Hg atoms. Therefore, 6 may be also regarded as a metallopincer complex [ClHg(AuCAu)] between HgII and the anionic tridentate ligand [2,6-(Ph2 PAuCl)2 C6 H3 ]- (AuCAu)- containing a central carbanionic binding site and two "gold-arms" contributing pincer-type chelation trough metallophilic interactions. Compounds 1-6 were characterized experimentally by multinuclear NMR spectroscopy and X-ray crystallography and computationally using a set of real-space bond indicators (RSBIs) derived from electron density (ED) methods including Atoms In Molecules (AIM), the Electron Localizability Indicator (ELI-D) as well as the Non-Covalent Interaction (NCI) Index.

Non-Oxido-Vanadium(IV) Metalloradical Complexes with Bidentate 1,2-Dithienylethene Ligands: Observation of Reversible Cyclization of the Ligand Scaffold in Solution.

Derivatives of 1,2-dithienylethene (DTE) have superb photochromic properties due to an efficient reversible photocyclization reaction of their hexatriene structure and, thus, have application potential in materials for optoelectronics and (multi-responsive) molecular switches. Transition-metal complexes bearing switchable DTE motifs commonly incorporate their coordination site rather distant from the hexatriene system. In this work the redox active ligand 1,2-bis(2,5-dimethylthiophen-3-yl)ethane-1,2-dione is described, which reacts with [V(TMEDA)2 Cl2 ] to give a rare non-oxido vanadium(IV) species 3(M,M/P,P). This blue complex has two bidentate en-diolato ligands which chelate the VIV center and give rise to two five-membered metallacycles with the adjacent hexatriene DTE backbone bearing axial chirality. Upon irradiation with UVA light or prolonged heating in solution, the blue compound 3(M,M/P,P) converts into the purple atropisomer 4(para,M/para,P). Both complexes were isolated and structurally characterized by single-crystal X-ray diffraction analysis (using lab source and synchrotron radiation). The antiparallel configuration (M or P helicity) present in both 3(M,M/P,P) and 4(para,M/para,P) is a prerequisite for (reversible) 6π cyclization reactions. A CW EPR spectroscopic study reveals the metalloradical character for 3(M,M/P,P) and 4(para,M/para,P) and indicates dynamic reversible cyclization of the DTE backbone in complex 3(M,M/P,P) at ambient temperature in solution.

Factors influencing quality of life, function, reintegration and participation after musculoskeletal tumour operations.

BACKGROUND: The number of people living with soft-tissue and bone sarcomas is increasing due to improved individual therapy and changes in demographics. At present, there are no recommendations for psychological co-treatment, occupational and social reintegration following the treatment of soft tissue and bone sarcomas. METHODS: Seventy-four patients, 42 males and 32 females, aged between 18 and 80 years (54.58 ± 16.99 yr.) with soft-tissue (62) and bone sarcomas (12) were included to answer five standardized and one personal questionnaire regarding quality of life, function, reintegration and participation after surgical treatment. RESULTS: A number of tumour-specific and patient-specific factors were identified that affected the therapeutic outcome. Patients with sarcoma of the lower extremity described poorer mobility. Patients who underwent amputation reported a higher anxious preoccupation. Patients with a higher range of education were less fatalistic and avoiding. The size of tumours or additive radiation therapy did not affect the post-therapeutic quality of life, coping and function. There was a good correlation between anxiety and depression with occupational reintegration, function, quality of life and coping. CONCLUSION: Patients with sarcomas of the lower limb have a higher demand for postoperative rehabilitation and need more help in the postoperative occupational reintegration. Furthermore patients that underwent limb-preserving operations reported better postoperative function and quality of life. Risk assessment using patient-specific factors and an intensive psychological co-treatment may have a large role in the co-treatment of patients from the beginning of their cancer therapy.

Improved Carotid Stenosis Quantification on Novel 4D/3D-Doppler Ultrasonography Indexing to the Common Carotid Artery.

PURPOSE: The accuracy of internal carotid artery stenosis (ICAS) quantification depends on the method of stenosis measurement, impacting therapeutic decisions and outcomes. The NASCET method references the stenotic to the distal ICAS lumen, the ECST method to the local outer and the common carotid artery (CC) method to the CC diameter. Direct morphometric stenosis measurement with four-dimensionally guided three-dimensional ultrasonography (4D/3DC-US) demonstrated good validity for the commonly used NASCET method. The NASCET definition has clinically relevant drawbacks. Our purpose was to investigate the validity of the ECST and CC methods. MATERIALS AND METHODS: 4D/3DC-US percent-stenosis measures of 103 stenoses (80 patients) were compared to quantitative catheter angiography and duplex ultrasonography (DUS) in a blinded fashion. RESULTS: The 4D/3DC-US versus angiography intermethod standard deviation of differences (SDD, n = 103) was lower for the CC method (5.7 %) compared to the NASCET (8.1 %, p < 0.001) and ECST methods (9.1 %, p < 0.001). Additionally, it was lower than the NASCET angiography interrater SDD of 52 stenoses (SDD 7.2 %, p = 0.047) and non-inferior for the ECST method (p = 0.065). Interobserver analysis of equivalent grading methods showed no differences for the SDDs between angiography and 4D/3DC-US observers (p > 0.076). Binary comparison to angiography showed equal Kappa values > 0.7 and an accuracy ≥ 85 % for the NASCET and CC methods, higher than for the ECST method. The binary accuracy of ICAS grading did not differ from DUS for all methods. CONCLUSION: The new 4D/3DC-US CC method is an accurate and well reproducible alternative to the NASCET and ECST methods and offers potential for clinical application.

Hydrogenolysis of Polysilanes Catalyzed by Low-Valent Nickel Complexes.

The dehydrogenation of organosilanes (Rx SiH4-x ) under the formation of Si-Si bonds is an intensively investigated process leading to oligo- or polysilanes. The reverse reaction is little studied. To date, the hydrogenolysis of Si-Si bonds requires very harsh conditions and is very unselective, leading to multiple side products. Herein, we describe a new catalytic hydrogenation of oligo- and polysilanes that is highly selective and proceeds under mild conditions. New low-valent nickel hydride complexes are used as catalysts and secondary silanes, RR'SiH2 , are obtained as products in high purity.

Magnetic Ground State Stabilized by Three-Site Interactions: Fe/Rh(111).

We report the direct observation of a theoretically predicted magnetic ground state in a monolayer Fe on Rh(111), which is referred to as an up-up-down-down (↑↑↓↓) double-row-wise antiferromagnetic spin structure, using spin-polarized scanning tunneling microscopy. This exotic phase, which exists in three orientational domains, is revealed by experiments with magnetic probe tips performed in external magnetic fields. It is shown that a hitherto unconsidered four-spin-three-site beyond-Heisenberg interaction distinctly contributes to the spin coupling of atoms with S≥1 spins. The observation of the ↑↑↓↓ order substantiates the presence of higher-order, in particular, three-site interactions, in thin magnetic films of itinerant magnets.

Public participation GIS for improving wood burning emissions from residential heating and urban environmental management.

A crowdsourcing study supported by a public participation GIS tool was designed and carried out in two Norwegian regions. The aim was to improve the knowledge about emissions from wood burning for residential heating in urban areas based on the collection of citizens' localized insights. We focus on three main issues: 1) type of dwelling and residential heating source; 2) wood consumption and type of wood appliances; and 3) citizens' perception of the urban environment. Our study shows the importance of wood burning for residential heating, and of the resulted particle emissions, in Norwegian urban areas. Citizens' localized insights on environmental perception highlight the areas in the city that require particular attention as part of clean air strategies. Information about environmental perception is combined with existing environmental data showing certain correlation. The results support the urban environmental management based on co-benefit approaches, achieving several outcomes from a single policy measure. Measures to reduce urban air pollution will have a positive impact on the citizens' environmental perception, and therefore on their quality of life, in addition to reducing the negative consequences of air pollution on human health. The characterization of residential heating by fuelwood is still a challenging activity. Our study shows the potential of a crowdsourcing method as means for bottom-up approaches designed to increase our knowledge on human activities at urban scale that result on emissions.

Template Catalysis by Metal-Ligand Cooperation. C-C Bond Formation via Conjugate Addition of Non-activated Nitriles under Mild, Base-free Conditions Catalyzed by a Manganese Pincer Complex.

The first example of a catalytic Michael addition reaction of non-activated aliphatic nitriles to α,ß-unsaturated carbonyl compounds under mild, neutral conditions is reported. A new de-aromatized pyridine-based PNP pincer complex of the Earth-abundant, first-row transition metal manganese serves as the catalyst. The reaction tolerates a variety of nitriles and Michael acceptors with different steric features and acceptor strengths. Mechanistic investigations including temperature-dependent NMR spectroscopy and DFT calculations reveal that the cooperative activation of alkyl nitriles, which leads to the generation of metalated nitrile nucleophile species (α-cyano carbanion analogues), is a key step of the mechanism. The metal center is not directly involved in the catalytic bond formation but rather serves, cooperatively with the ligand, as a template for the substrate activation. This approach of "template catalysis" expands the scope of potential donors for conjugate addition reactions.

Role of Dispersion in Metallophilic Hg···M Interactions (M = Cu, Ag, Au) within Coinage Metal Complexes of Bis(6-diphenylphosphinoacenaphth-5-yl)mercury.

The previously reported bis(6-diphenylphosphinoacenaphth-5-yl)mercury (1) was used as ligand for the preparation of the copper(I) complexes, 1·CuCl and [1·Cu(NCMe)]BF4, which were characterized by multinuclear NMR spectroscopy and X-ray crystallography. DFT calculations employing topological analysis of the electron and electron pair densities within the AIM and ELI-D space-partitioning schemes revealed significant metallophilic Hg···Cu interactions. Evaluation of noncovalent bonding aspects according to the noncovalent interaction (NCI) index was applied not only for the Cu complexes 1·CuCl and [1·Cu(NCMe)]BF4 but also for the previously reported Ag and Au complexes, namely, [1·MCl] (M = Ag, Au) and [1·M(NCMe)n]+ (M = Ag, n = 2; M = Au, n = 0), and facilitated the assignment of attractive dispersive Hg···M interactions with the Hg···Cu contacts being comparable to the Hg···Ag but weaker than the Hg···Au interactions. The localization of the attractive noncovalent bonding regions increases in the order Cu < Ag < Au.

Zero-Valent Amino-Olefin Cobalt Complexes as Catalysts for Oxygen Atom Transfer Reactions from Nitrous Oxide.

The synthesis and characterization of several zero-valent cobalt complexes with a bis(olefin)-amino ligand is presented. Some of these complexes proved to be efficient catalysts for the selective oxidation of secondary and allylic phosphanes, as well as diphosphanes, even with a direct P-P bond. With 5 mol % catalyst loadings the oxidations proceed under mild conditions (25-70 °C, 7-22 h, 2 bar N2 O) and afford good to excellent yields (65-98 %). In this process, the greenhouse gas N2 O is catalytically converted into benign N2 and added-value organophosphorus compounds, some of which are difficult to obtain otherwise.

Activation of nitriles by metal ligand cooperation. Reversible formation of ketimido- and enamido-rhenium PNP pincer complexes and relevance to catalytic design.

The dearomatized complex cis-[Re(PNP(tBu)*)(CO)2] (4) undergoes cooperative activation of C≡N triple bonds of nitriles via [1,3]-addition. Reversible C-C and Re-N bond formation in 4 was investigated in a combined experimental and computational study. The reversible formation of the ketimido complexes (5-7) was observed. When nitriles bearing an alpha methylene group are used, reversible formation of the enamido complexes (8 and 9) takes place. The reversibility of the activation of the nitriles in the resulting ketimido compounds was demonstrated by the displacement of p-CF3-benzonitrile from cis-[Re(PNP(tBu)-N═CPh(pCF3))(CO)2] (6) upon addition of an excess of benzonitrile and by the temperature-dependent [1,3]-addition of pivalonitrile to complex 4. The reversible binding of the nitrile in the enamido compound cis-[Re(PNP(tBu)-HNC═CHPh)(CO)2] (9) was demonstrated via the displacement of benzyl cyanide from 9 by CO. Computational studies suggest a stepwise activation of the nitriles by 4, with remarkably low activation barriers, involving precoordination of the nitrile group to the Re(I) center. The enamido complex 9 reacts via ß-carbon methylation to give the primary imino complex cis-[Re(PNP(tBu)-HN═CC(Me)Ph)(CO)2]OTf 11. Upon deprotonation of 11 and subsequent addition of benzyl cyanide, complex 9 is regenerated and the monomethylation product 2-phenylpropanenitrile is released. Complexes 4 and 9 were found to catalyze the Michael addition of benzyl cyanide derivatives to α,ß-unsaturated esters and carbonyls.

Hysteretic melting transition of a soliton lattice in a commensurate charge modulation.

We report on the observation of the hysteretic transition of a commensurate charge modulation in IrTe2 from transport and scanning tunneling microscopy (STM) studies. Below the transition (TC≈275 K on cooling), a q=1/5 charge modulation was observed, which is consistent with previous studies. Additional modulations [qn=(3n+2)(-1)] appear below a second transition at TS≈180 K on cooling. The coexistence of various modulations persists up to TC on warming. The atomic structures of charge modulations and the temperature-dependent STM studies suggest that 1/5 modulation is a periodic soliton lattice that partially melts below TS on cooling. Our results provide compelling evidence that the ground state of IrTe2 is a commensurate 1/6 charge modulation, which originates from the periodic dimerization of Te atoms visualized by atomically resolved STM images.

Stepwise metal-ligand cooperation by a reversible aromatization/deconjugation sequence in ruthenium complexes with a tetradentate phenanthroline-based ligand.

The synthesis and reactivity of ruthenium complexes containing the tetradentate phenanthroline-based phosphine ligand 2,9-bis((di-tert-butylphosphino)methyl)-1,10-phenanthroline (PPhenP) is described. The hydrido chloro complex [RuHCl(PPhenP)] (2) undergoes facile dearomatization upon deprotonation of the benzylic position, to give [RuH(PPhenP-H)] (4). Addition of dihydrogen to 4 causes rearomatization of the phenanthroline moiety to trans-[Ru(H)(2)(PPhenP)] (5), followed by hydrogenation of an aromatic heterocycle in the ligand backbone, to give a new dearomatized and deconjugated complex [RuH(PPhenP*-H)] (6). These aromatization/deconjugation steps of the coordinated ligand were demonstrated to be reversible and operative in the dehydrogenation of primary alcohols without the need for a hydrogen acceptor. This aromatization/deconjugation sequence constitutes an unprecedented mode of a stepwise cooperation between the metal center and the coordinated ligand.

Mass spectrometric detection of ion pairs containing rigid copper clusters and weakly coordinating counter ions using liquid injection field desorption/ionisation.

A comparative mass spectrometric investigation using electrospray ionisation (ESI) and liquid injection field desorption/ionisation (LIFDI) techniques is reported for the highly luminescent and cationic copper cluster [(PCP)3Cu4]+ (1[Formula: see text], PCP = [1,3-(Ph2P)2C6H3]-). Depending on the available counter ion X-, ion pairs consisting of the original or a modified cluster cation and the weakly coordinating counter ion can be detected by LIFDI-high-resolution-mass spectrometry in addition to the cluster cation. Notably, only large counter ions with an extremely low tendency for metal coordination give rise to the observation of ion pairs, whereas smaller ions such as BF4- do not show peaks corresponding to ion pairs in their mass spectra. In principle, two pathways were identified for the formation of positively charged ion pairs: (i) association of a generated Cu+ ion to the neutral ion pair [(PCP)3Cu4]X (1+X, X- = BAr20F, BAr24F) and (ii) abstraction of an electron from the neutral ion pair [(PCP)3Cu4]X (1+X), leading to the oxidised ion pair [1+X][Formula: see text] (X- = Al(ORF)4).