Charge transport in highly acidic glass-forming protic ionic liquids tailored by zwitterionic precursors.

Highly acidic protic ionic liquids (PILs) are promising materials for potential electrochemical applications due to their high proton conductivity and excellent thermal stability. Still, little is known about the correlation between charge transport and structural dynamics as well as the proton transport mechanism despite the large body of literature on this topic. Here, we have examined the charge transport and structural dynamics by employing broadband dielectric spectroscopy in two highly acidic PILs in their supercooled liquid and glassy states, which included the same anion [TfO]- and different cations, [Tau]+ vs [Ahs]+. Unlike many other ionic liquids, the conductivity relaxation time τe of two studied PILs is substantially faster than the structural relaxation time τα. The decoupling behavior between charge transport and structural dynamics of two materials, which is manifested by a decoupling index Rτ, varies between 0.3 and 2.3 over the temperature range above Tg. Moreover, "Walden" plots of the molar conductivity vs the viscosity qualify both compounds as "Super ILs." All findings support the physical picture of large, polar, and orientationally correlated ion clusters, where the slow α-relaxation can be identified as structural relaxation associated with cooperative reorientations of the cluster macrodipole. In contrast, the shortest timescale for diffusive charge transport, τe, is 1-2 decades shorter than τα, implying that proton hopping is triggered by "single particle" (ions or ion pair) rotations and jumps on a sub-length scale of the cluster size, a dynamics being present even in the glassy state as indicated by a strong ß-relaxation. These results demonstrate the practicality of employing highly acidic PILs in electrochemical fields.

Complementarity of mDSC, DMA, and DRS Techniques in the Study of Tg and Sub-Tg Transitions in Amorphous Solids: PVPVA, Indomethacin, and Amorphous Solid Dispersions Based on Indomethacin/PVPVA.

Recently, glasses, a subset of amorphous solids, have gained attention in various fields, such as polymer chemistry, optical fibers, and pharmaceuticals. One of their characteristic features, the glass transition temperature (Tg) which is absent in 100% crystalline materials, influences several material properties, such as free volume, enthalpy, viscosity, thermodynamic transitions, molecular motions, physical stability, mechanical properties, etc. In addition to Tg, there may be several other temperature-dependent transitions known as sub-Tg transitions (or ß-, γ-, and δ-relaxations) which are identified by specific analytical techniques. The study of Tg and sub-Tg transitions occurring in amorphous solids has gained much attention because of its importance in understanding molecular kinetics, and it requires the combination of conventional and novel characterization techniques. In the present study, three different analytical techniques [modulated differential scanning calorimetry (mDSC), dynamic mechanical analysis (DMA), and dielectric relaxation spectroscopy (DRS)] were used to perform comprehensive qualitative/quantitative characterization of molecular relaxations, miscibility, and molecular interactions present in an amorphous polymer (PVPVA), a model drug (indomethacin, IND), and IND/PVPVA-based amorphous solid dispersions (ASDs). This is the first ever reported DMA study on PVPVA in its powder form, which avoids the contribution of solvent to the mechanical properties when a self-standing polymer film is used. A good correlation between the techniques in determining the Tg value of PVPVA, IND, and IND/PVPVA-based ASDs is established, and the negligible difference (within 10 °C) is attributed to the different material properties assessed in each technique. However, the overall Tg behavior, the decrease in Tg with increase in drug loading in ASDs, is universally observed in all the above-mentioned techniques, which reveals their complementarity. DMA and DRS techniques are used to study the different sub-Tg transitions present in PVPVA, amorphous IND, and IND/PVPVA-based ASDs because these transitions are normally too weak or too broad for mDSC to detect. For IND/PVPVA-based ASDs, both techniques show a shift of sub-Tg transitions (or secondary relaxation peaks) toward the high-temperature region from -140 to -45 °C. Thus, this paper outlines the usage of different solid-state characterization techniques in understanding the different molecular dynamics present in the polymer, drug, and their interactions in ASDs with the integrated information obtained from individual techniques.

Physicochemical study of diethylmethylammonium methanesulfonate under anhydrous conditions.

The protic ionic liquid diethylmethylammonium methanesulfonate ([DEMA][OMs]) was analyzed in depth by differential scanning calorimetry (DSC), nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, and broadband dielectric spectroscopy (BDS) under anhydrous conditions. Karl Fischer titration, NMR, and FT-IR spectra confirmed the high purity of [DEMA][OMs]. The melting point (37.7 °C) and the freezing point (14.0 °C) obtained by DSC agree well with the values determined by BDS (40.0 °C and 14.0 °C). The dc conductivity (σdc) above the melting/freezing point obeys the Vogel-Fulcher-Tammann (VFT) equation well, and thus, the proton conduction in [DEMA][OMs] is assumed to be dominated by the vehicle mechanism. In contrast, the σdc below the melting/freezing point can be fitted by the Arrhenius equation separately, and therefore, the proton conduction is most likely governed by the proton hopping mechanism. The non-negligible influence of previously reported low water content on the physicochemical properties of [DEMA][OMs] is found, indicating the importance of reducing water content as much as possible for the study of "intrinsic" properties of protic ionic liquids.

Polar Nature of Biomimetic Fluorapatite/Gelatin Composites: A Comparison of Bipolar Objects and the Polar State of Natural Tissue.

The correspondence of the state of alignment of macromolecules in biomimetic materials and natural tissues is demonstrated by investigating a mechanism of electrical polarity formation: An in vitro grown biomimetic FAp/gelatin composite is investigated for its polar properties by second harmonic (SHGM) and scanning pyroelectric microscopy (SPEM). Hexagonal prismatic seed crystals formed in gelatin gels represent a monodomain polar state, due to aligned mineralized gelatin molecules. Later growth stages, showing dumbbell morphologies, develop into a bipolar state because of surface recognition by gelatin functionality: A reversal of the polar alignment of macromolecules, thus, takes place close to that basal plane of the seed. In natural hard tissues (teeth and bone investigated by SPEM) and the biomimetic FAp/gelatin composite, we find a surprising analogy in view of growth-induced states of polarity: The development of polarity in vivo and in vitro can be explained by a Markov-type mechanism of molecular recognition during the attachment of macromolecules.

Taming heat with tiny pressure.

Heat is almost everywhere. Unlike electricity, which can be easily manipulated, the current ability to control heat is still highly limited owing to spontaneous thermal dissipation imposed by the second law of thermodynamics. Optical illumination and pressure have been used to switch endothermic/exothermic responses of materials via phase transitions; however, these strategies are less cost-effective and unscalable. Here, we spectroscopically demonstrate the glassy crystal state of 2-amino-2-methyl-1,3-propanediol (AMP) to realize an affordable, easily manageable approach for thermal energy recycling. The supercooled state of AMP is so sensitive to pressure that even several megapascals can induce crystallization to the ordered crystal, resulting in a substantial temperature increase of 48 K within 20 s. Furthermore, we demonstrate a proof-of-concept device capable of programable heating with an extremely high work-to-heat conversion efficiency of ∼383. Such delicate and efficient tuning of heat may remarkably facilitate rational utilization of waste heat.

Boosting Lean Electrolyte Lithium-Sulfur Battery Performance with Transition Metals: A Comprehensive Review.

Lithium-sulfur (Li-S) batteries have received widespread attention, and lean electrolyte Li-S batteries have attracted additional interest because of their higher energy densities. This review systematically analyzes the effect of the electrolyte-to-sulfur (E/S) ratios on battery energy density and the challenges for sulfur reduction reactions (SRR) under lean electrolyte conditions. Accordingly, we review the use of various polar transition metal sulfur hosts as corresponding solutions to facilitate SRR kinetics at low E/S ratios (< 10 µL mg-1), and the strengths and limitations of different transition metal compounds are presented and discussed from a fundamental perspective. Subsequently, three promising strategies for sulfur hosts that act as anchors and catalysts are proposed to boost lean electrolyte Li-S battery performance. Finally, an outlook is provided to guide future research on high energy density Li-S batteries.

Cu-Mo Bimetal Modulated Multifunctional Carbon Nanofibers Promoting the Polysulfides Conversion for High-Sulfur-Loading Lithium-Sulfur Batteries.

High sulfur loading is essential for achieving high energy density lithium-sulfur (Li-S) batteries. However, serious issues such as low sulfur utilization, poor cycling stability, and sluggish rate performance have been exposed when increasing the sulfur loading for freestanding cathodes. To solve these problems, the adsorption/catalytic ability of high-sulfur-loading cathode toward polysulfides must be improved. Herein, based on excellent properties of cationic MOFs, we proposed that Cu-Mo bimetallic nanoparticles embedded in multifunctional freestanding nitrogen-doped porous carbon nanofibers (Cu-Mo@NPCN) with efficient catalytic sites could be prepared by facile MoO42- anion exchange of cationic MOFs. And, the sulfur embedded in Cu-Mo@NPCN was directly used as self-supporting electrodes, enabling a high areal capacity, good rate performance, and decent cycling stability even under high sulfur loading. The freestanding Cu-Mo@NPCN/10.3S cathode achieves a high volumetric capacity of 1163 mA h cm-3 and a decent areal capacity of 9.3 mA h cm-2 at 0.2 C with a sulfur loading of 10.3 mg cm-2. This work provides an innovative approach for engineering a freestanding sulfur cathode and would forward the development of cationic MOF-derived bimetallic catalysts in various energy storage systems.

Synchronized, Spontaneous, and Oscillatory Detachment of Eukaryotic Cells: A New Tool for Cell Characterization and Identification.

Despite the importance of cell characterization and identification for diagnostic and therapeutic applications, developing fast and label-free methods without (bio)-chemical markers or surface-engineered receptors remains challenging. Here, we exploit the natural cellular response to mild thermal stimuli and propose a label- and receptor-free method for fast and facile cell characterization. Cell suspensions in a dedicated sensor are exposed to a temperature gradient, which stimulates synchronized and spontaneous cell-detachment with sharply defined time-patterns, a phenomenon unknown from literature. These patterns depend on metabolic activity (controlled through temperature, nutrients, and drugs) and provide a library of cell-type-specific indicators, allowing to distinguish several yeast strains as well as cancer cells. Under specific conditions, synchronized glycolytic-type oscillations are observed during detachment of mammalian and yeast-cell ensembles, providing additional cell-specific signatures. These findings suggest potential applications for cell viability analysis and for assessing the collective response of cancer cells to drugs.

Adsorption kinetics of ultrathin polymer films in the melt probed by dielectric spectroscopy and second-harmonic generation.

We studied the adsorption kinetics of supported ultrathin films of dye-labeled polystyrene (l-PS) by combining dielectric spectroscopy (DS) and the interface-specific nonlinear optical second harmonic generation (SHG) technique. While DS is sensitive to the fraction of mobile dye moieties (chromophores), the SHG signal probes their anisotropic orientation. Time-resolved measurements were performed above the glass transition temperature on two different sample geometries. In one configuration, the l-PS layer is placed in contact with the aluminum surface, while in the other one, the deposition is done on a strongly adsorbed layer of neat PS. From the time dependence of the dielectric strength and SHG signal of the l-PS layer in contact with the metal, we detected two different kinetics regimes. We interpret these regimes in terms of the interplay between adsorption and orientation of the adsorbing labeling moieties. At early times, dye moieties get adsorbed adopting an orientation parallel to the surface. When adsorption proceeds to completeness, the kinetics slows down and the dye moieties progressively orient normal to the surface. Conversely, when the layer of l-PS layer is deposited on the strongly adsorbed layer of neat PS, both the dielectric strength and the SHG signal do not show any variation with time. This means that no adsorption takes place.

Is the reduction in tracer diffusivity under nanoscopic confinement related to a frustrated segmental mobility?

We developed an experimental method for the determination of the tracer diffusivity D(tr) in ultrathin polymer films, and the changes in the segmental mobility of tracer molecules while they diffuse through matrices of different thickness and get adsorbed onto a target substrate. D(tr) starts decreasing already at 120-150 nm and drops to 1% of its bulk value in films as thin as 7.5 nm. We discuss the results highlighting a strong decoupling between the reduction in mass transport at the nanoscale and the increase in the glass transition temperature determined via capacitive dilatometry together with a breakdown of the Stokes-Einstein relation between orientational and translational degrees of freedom.

Phase-dependent dielectric properties and proton conduction of neopentyl glycol.

Phase-dependent dielectric properties and proton conduction of neopentyl glycol (NPG), which is an organic molecular plastic crystal, were studied via variable-temperature broadband dielectric spectroscopy (BDS). Permittivity and conductivity data show the phase transformations of NPG from the crystalline state to the plastic crystalline state at 315 K and then to the molten state at 402 K across the temperature range of 293-413 K. The Vogel temperatures (T v) fitted from the Vogel-Fulcher-Tammann (VFT) equation agree well with the values extrapolated by the Stickel plot (linearized Vogel plot). Impedance and modulus data display a separation of the -Z'' (the imaginary part of the complex impedance) and M'' (the imaginary part of the complex electric modulus) peaks in the crystalline phase. However, they overlap in both the plastic crystalline phase and the molten phase, indicating long-range proton conduction. In both the molten phase and the plastic crystalline phase, the temperature dependence of direct current conductivity (σ dc) obeys the VFT equation very well. While the vehicle mechanism (translational diffusion) is an intrinsic mechanism for ionic or protonic conduction in the molten phase, it is speculated that the Grotthuss mechanism also works due to the self-dissociation of NPG molecules, which are similar to water molecules. In the plastic crystalline phase, the proton hopping mechanism is most likely the underlying ion-conducting mechanism because of the rotational disorder and intrinsic defects (vacancies) of the NPG molecules. In the ordered crystalline phase, the proton conduction is presumed to follow the proton hopping mechanism as determined from the localized relaxation and the temperature dependence of σ dc (Arrhenius behavior).

Ionic strength controls long-term cell-surface interactions - A QCM-D study of S. cerevisiae adhesion, retention and detachment.

Understanding microbial adhesion and retention is crucial for controlling many processes, including biofilm formation, antimicrobial therapy as well as cell sorting and cell detection platforms. Cell detachment is inextricably linked to cell adhesion and retention and plays an important part in the mechanisms involved in these processes. Physico-chemical and biological forces play a crucial role in microbial adhesion interactions and altering the medium ionic strength offers a potential means for modulating these interactions. Real-time studies on the effect of ionic strength on microbial adhesion are often limited to short-term bacterial adhesion. Therefore, there is a need, not only for long-term bacterial adhesion studies, but also for similar studies focusing on eukaryotic microbes, such as yeast. Hereby, we monitored, in real-time, S. cerevisiae adhesion on gold and silica as examples of surfaces with different surface charge properties to disclose long-term adhesion, retention and detachment as a function of ionic strength using quartz crystal microbalance with dissipation monitoring. Our results show that short- and long-term cell adhesion levels in terms of mass-loading increase with increasing ionic strength, while cells dispersed in a medium of higher ionic strength experience longer retention and detachment times. The positive correlation between the cell zeta potential and ionic strength suggests that zeta potential plays a role on cell retention and detachment. These trends are similar for measurements on silica and gold, with shorter retention and detachment times for silica due to strong short-range repulsions originating from a high electron-donicity. Furthermore, the results are comparable with measurements in standard yeast culture medium, implying that the overall effect of ionic strength applies for cells in nutrient-rich and nutrient-deficient media.

Alignment and relaxation dynamics of dye molecules in host-guest inclusion compounds as probed by dielectric spectroscopy.

The alignment and relaxation dynamics of a polar dye molecule, N,N-dimethyl-4(4-nitrophenylazo)aniline (DNAA), in zeolite L and perhydrotriphenylene (PHTP) channels were investigated by means of a combination of optical, dielectric, and quantum-chemical methods. Both the zeolite L and PHTP channels enable the dye molecules to align along the channel axis. An amplified net dipole moment of DNAA in PHTP is observed and attributed to enhanced 1D close alignment of dye molecules. In zeolite L channels, a concentration gradient is found with aggregation at the channel entrances. The dynamics of the dye in zeolite L channels reveals localized conical rotational fluctuation modes following Arrhenius-type activation with energy of 0.31 eV, which we assign to small noninteracting fluctuating polar units of the dyes being loosely aligned or isolated. Unlike zeolite L, relaxations in PHTP are characterized by cooperative wobbling motions interpreted as increased intermolecular dipole interaction due to a closely packed one-dimensional array. Temperature-dependent activation energies of 0.25 eV below 0 degrees C and 0.37 eV at ambient temperature reflect the role of the soft channel walls in the activation process.

Density of Obstacles Affects Diffusion in Adsorbed Polymer Layers.

The translational diffusion of molecules dispersed into polymer matrices slows down tremendously when approaching a nonrepulsive interface. To unravel the origin of this phenomenon, we investigated the diffusion of molecular probes in the direction normal to an adsorbing wall. Using adsorbed polymer layers as matrices, we were able to decouple interfacial and finite size effects and determined the relation between the diffusion time and the area available at the polymer/solid interface. Based on the results of our investigation, we present a physical picture, suggesting that the reduction in diffusion rate is correlated to the degree of chain adsorption onto the substrate, that is, the density of surface obstacles encountered by tracer molecules.

QCM-D Study of Time-Resolved Cell Adhesion and Detachment: Effect of Surface Free Energy on Eukaryotes and Prokaryotes.

Cell-material interactions are crucial for many biomedical applications, including medical implants, tissue engineering, and biosensors. For implants, while the adhesion of eukaryotic host cells is desirable, bacterial adhesion often leads to infections. Surface free energy (SFE) is an important parameter that controls short- and long-term eukaryotic and prokaryotic cell adhesion. Understanding its effect at a fundamental level is essential for designing materials that minimize bacterial adhesion. Most cell adhesion studies for implants have focused on correlating surface wettability with mammalian cell adhesion and are restricted to short-term time scales. In this work, we used quartz crystal microbalance with dissipation monitoring (QCM-D) and electrical impedance analysis to characterize the adhesion and detachment of S. cerevisiae and E. coli, serving as model eukaryotic and prokaryotic cells within extended time scales. Measurements were performed on surfaces displaying different surface energies (Au, SiO2, and silanized SiO2). Our results demonstrate that tuning the surface free energy of materials is a useful strategy for selectively promoting eukaryotic cell adhesion and preventing bacterial adhesion. Specifically, we show that under flow and steady-state conditions and within time scales up to ∼10 h, a high SFE, especially its polar component, enhances S. cerevisiae adhesion and hinders E. coli adhesion. In the long term, however, both cells tend to detach, but less detachment occurs on surfaces with a high dispersive SFE contribution. The conclusions on S. cerevisiae are also valid for a second eukaryotic cell type, being the human embryonic kidney (HEK) cells on which we performed the same analysis for comparison. Furthermore, each cell adhesion phase is associated with unique cytoskeletal viscoelastic states, which are cell-type-specific and surface free energy-dependent and provide insights into the underlying adhesion mechanisms.

Towards a catheter-based impedimetric sensor for the assessment of intestinal histamine levels in IBS patients.

In this work, we report on the development of a catheter-based sensor designed for measuring the concentration of histamine in the human duodenum. Certain gut disorders, such as the irritable bowel syndrome (IBS), are associated with elevated levels of intestinal histamine due to chronic immune activation. As it is still impossible to determine histamine concentrations in vivo, a nasointestinal catheter with histamine-sensing capabilities has the potential to become a valuable diagnostic instrument. Regarding the sensing principle, we selected impedance spectroscopy using voltages that are compatible with intra-body applications with molecularly imprinted polymers (MIPs) as recognition elements. MIPs are synthetic receptors that offer the advantages of robustness, high specificity and selectivity for histamine as a target. In this specific case, the MIPs were synthesized from acryclic acid monomers, which guarantees a uniform binding capacity within the pH range of intestinal fluid. We have validated the catheter sensor on human intestinal liquids spiked with histamine in a testing setup that mimics the environment inside the duodenum. The dose-response curves show an analytical range between 5 and 200 nM of histamine, corresponding to physiologically normal conditions while higher concentrations correlate with disease. The key output signal of the sensor is the resistive component of the MIP-functionalized titanium electrodes as derived from the equivalent-circuit modelling of full-range impedance spectra. Future applications could be catheters tailored to cardiovascular, urological, gastrointestinal, and neurovascular applications. This, in combination with the versatility of the MIPs, will make this sensor platform a versatile diagnostic tool.

A compact device for simultaneous dielectric spectroscopy and microgravimetric analysis under controlled humidity.

Water plays a key role in the functioning of natural and synthetic molecular systems. Despite several hydration studies, different techniques are employed individually for monitoring different physical features such as kinetics, dynamics, and absorption. This study describes a compact hydration cell that enables simultaneous dielectric relaxation spectroscopy (DRS) and mass loss/uptake measurements in thin organic layers under controlled humidity conditions and in a wide temperature range. This approach enabled us to correlate the physical quantities obtained during the same experiment by complementary techniques. To demonstrate the performance of this device, a 200 nm thick poly(methyl methacrylate) (PMMA) layer was measured at various relative humidity levels (0%-75%), temperatures (25-75 °C), and frequencies (DRS: 0.1 Hz-1 MHz) to study how hydration and dehydration processes affect its molecular dynamics. The results show the capability of this setup to study the changes in the PMMA film regarding the kinetics and molecular dynamics upon variation of the water content.

Sensitive and specific detection of E. coli using biomimetic receptors in combination with a modified heat-transfer method.

We report on a novel biomimetic sensor that allows sensitive and specific detection of Escherichia coli (E. coli) bacteria in a broad concentration range from 102 up to 106 CFU/mL in both buffer fluids and relevant food samples (i.e. apple juice). The receptors are surface-imprinted polyurethane layers deposited on stainless-steel chips. Regarding the transducer principle, the sensor measures the increase in thermal resistance between the chip and the liquid due to the presence of bacteria captured on the receptor surface. The low noise level that enables the low detection limit originates from a planar meander element that serves as both a heater and a temperature sensor. Furthermore, the experiments show that the presence of bacteria in a liquid enhances the thermal conductivity of the liquid itself. Reference tests with a set of other representative species of Enterobacteriaceae, closely related to E. coli, indicate a very low cross-sensitivity with a sensor response at or below the noise level.

Dielectric signature of a dead layer in ultrathin films of a nonpolar polymer.

Extremely thin films of poly(styrene) (h

Effect of a reduced mobility layer on the interplay between molecular relaxations and diffusion-limited crystallization rate in ultrathin polymer films.

In ultrathin polymer films, the coupling between the segmental mobility, precursor of the molecular diffusion, and the crystallization rate is broken down because of interfacial interactions. In particular, in the presence of a reduced mobility layer at the interface with the substrate, the crystallization kinetics slow down at a length scale bigger than the one connected with the deviation from bulk behavior of the structural relaxation. By modeling the influence of the substrate interactions on the parameters governing the temperature evolution of the main relaxation time, it was possible to reproduce the effect of geometrical confinement on the quantities connected to the diffusion-limited crystallization rate. Upon reduction of the thickness or increasing of the substrate interaction, the films show an apparent higher glass stability in terms of an increase of the cold crystallization temperature and of the crystallization time. The deviations from bulk behavior were found to vanish above a crossover temperature as already observed for the phenomena connected to the glass transition.