RESUMEN
Polymeric nanoparticles have emerged as valuable drug delivery vehicles as they improve solubility of hydrophobic drugs, enhance circulation lifetime, and can improve the biodistribution profile of small-molecule therapeutics. These nanoparticles can take on a host of polymer architectures including polymersomes, hyperbranched nanoparticles, and dendrimers. We have recently reported that simple low molecular weight fluorous copolymers can self-assemble into nanoparticles and show exceptional passive targeting into multiple tumor models. Given the favorable biodistribution of these particles, we sought to develop systems that enable selective delivery in acidic environments, such as the tumor microenvironment or the lysosomal compartment. In this report, we describe the synthesis and in vitro biological studies of a pH-responsive doxorubicin (DOX) fluorous polymer conjugate. A propargyl DOX hydrazone was synthesized and covalently attached to a water-dispersible fluorous polymer composed of trifluoroethyl methacrylate (TFEMA) and oligo(ethylene glycol) methyl ether methacrylate (OEGMEMA) using the ligand-accelerated copper-catalyzed azide-alkyne cycloaddition. Driven by the high fluorine content of the copolymer carrier, the DOX-copolymer formed stable micelles under aqueous conditions with a hydrodynamic diameter of 250 nm. The DOX-copolymer showed internalization into multiple in vitro models for breast and ovarian cancer. Cytotoxicity assays demonstrated efficacy in both breast and ovarian cancer with overall efficacy being highly dependent on the cell line chosen. Taken together, these results present a platform for the pH-triggered delivery of DOX from a fluorous micelle carrier effective against multiple cancer models in vitro.
Asunto(s)
Antibióticos Antineoplásicos/administración & dosificación , Doxorrubicina/administración & dosificación , Portadores de Fármacos/química , Neoplasias/tratamiento farmacológico , Línea Celular Tumoral , Química Farmacéutica , Química Clic , Dendrímeros/química , Ensayos de Selección de Medicamentos Antitumorales , Glicoles de Etileno/química , Humanos , Concentración de Iones de Hidrógeno , Interacciones Hidrofóbicas e Hidrofílicas , Metacrilatos/química , Metilmetacrilatos/química , Micelas , Nanopartículas/química , Neoplasias/patología , SolubilidadRESUMEN
Covalent conjugation of water-soluble polymers to proteins is critical for evading immune surveillance in the field of biopharmaceuticals. The most common and long-standing polymer modification is the attachment of methoxypoly(ethylene glycol) (mPEG), termed PEGylation, which has led to several clinically approved pharmaceuticals. Recent data indicate that brush-type polymers significantly enhance in vitro and in vivo properties. Herein, the polymer conformation of poly(ethylene glycol) is detailed and compared with those of water-soluble polyacrylate and polynorbornene (PNB) when attached to icosahedral virus-like particles. Small-angle neutron scattering reveals vastly different polymer conformations of the multivalent conjugates. Immune recognition of conjugated particles was evaluated versus PEGylated particles, and PNB conjugation demonstrated the most effective shielding from antibody recognition.
Asunto(s)
Acrilatos/química , Plásticos/química , Polietilenglicoles/química , Vacunas de Partículas Similares a Virus/química , Animales , Ratones , Modelos Moleculares , Estructura Molecular , Difracción de Neutrones , Dispersión del Ángulo PequeñoRESUMEN
Improved imaging of cancerous tissue has the potential to aid prognosis and improve patient outcome through longitudinal imaging of treatment response and disease progression. While nuclear imaging has made headway in cancer imaging, fluorinated tracers that enable magnetic resonance imaging (19F MRI) hold promise, particularly for repeated imaging sessions because nonionizing radiation is used. Fluorine MRI detects molecular signatures by imaging a fluorinated tracer and takes advantage of the spatial and anatomical resolution afforded by MRI. This manuscript describes a fluorous polymeric nanoparticle that is capable of 19F MR imaging and fluorescent tracking for in vitro and in vivo monitoring of immune cells and cancerous tissue. The fluorous particle is derived from low-molecular-weight amphiphilic copolymers that self-assemble into micelles with a hydrodynamic diameter of 260 nm. The polymer is MR-active at concentrations as low as 2.1 mM in phantom imaging studies. The fluorinated particle demonstrated rapid uptake into immune cells for potential cell-tracking or delineation of the tumor microenvironment and showed negligible toxicity. Systemic administration indicates significant uptake into two tumor types, triple-negative breast cancer and ovarian cancer, with little accumulation in off-target tissue. These results indicate a robust platform imaging agent capable of immune cell tracking and systemic disease monitoring with exceptional uptake of the nanoparticle in multiple cancer models.
Asunto(s)
Imagen por Resonancia Magnética con Fluor-19/métodos , Macrófagos/citología , Nanopartículas/química , Imagen Óptica/métodos , Neoplasias Ováricas/diagnóstico por imagen , Polímeros/química , Neoplasias de la Mama Triple Negativas/diagnóstico por imagen , Células Cultivadas , Femenino , Humanos , Ensayos Antitumor por Modelo de XenoinjertoRESUMEN
Ice growth mitigation is a pervasive challenge for multiple industries. In nature, ice-binding proteins (IBPs) demonstrate potent ice growth prevention through ice recrystallization inhibition (IRI). However, IBPs are expensive, difficult to produce in large quantities, and exhibit minimal resilience to nonphysiological environmental stressors, such as pH. For these reasons, researchers have turned to bioinspired polymeric materials that mimic IBP behavior. To date, however, no synthetic polymer has rivaled the ability of native IBPs to display IRI activity at ultralow nanomolar concentrations. In this work, we study the IRI activity of peptides and polypeptides inspired by common ice-binding residues of IBPs to inform the synthesis and characterization of a potent bioinspired polymer that mimics IBP behavior. We show first that the threonine polypeptide (pThr) displays the best IRI activity in phosphate-buffered saline (PBS). Second, we use pThr as a molecular model to synthesize and test a bioinspired polymer, poly(2-hydroxypropyl methacrylamide) (pHPMA). We show that pHPMA exhibits potent IRI activity in neutral PBS at ultralow concentrations (0.01 mg/mL). pHPMA demonstrates potent IRI activity at low molecular weights (2.3 kDa), with improved activity at higher molecular weights (32.8 kDa). These results substantiate that pHPMA is a robust molecule that mitigates ice crystal growth at concentrations similar to native IBPs.
RESUMEN
The ability of a natural ice-binding protein from Shewanella frigidimarina (SfIBP) to inhibit ice crystal growth in highly alkaline solutions with increasing pH and ionic strength was investigated in this work. The purity of isolated SfIBP was first confirmed via sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and size-exclusion chromatography with an ultraviolet detector (SEC-UV). Protein stability was evaluated in the alkaline solutions using circular dichroism spectroscopy, SEC-UV, and SDS-PAGE. SfIBP ice recrystallization inhibition (IRI) activity, a measure of ice crystal growth inhibition, was assessed using a modified splat assay. Statistical analysis of results substantiated that, despite partial denaturation and misfolding, SfIBP limited ice crystal growth in alkaline solutions (pH ≤ 12.7) with ionic strength I ≤ 0.05 mol/L, but did not exhibit IRI activity in alkaline solutions where pH ≥ 13.2 and I ≥ 0.16 mol/L. IRI activity of SfIBP in solutions with pH ≤ 12.7 and I ≤ 0.05 mol/L demonstrated up to ≈ 66% reduction in ice crystal size compared to neat solutions.
RESUMEN
Viral nanoparticles have been utilized as a platform for vaccine development and are a versatile system for the display of antigenic epitopes for a variety of disease states. However, the induction of a clinically relevant immune response often requires multiple injections over an extended period of time, limiting patient compliance. Polymeric systems to deliver proteinaceous materials have been extensively researched to provide sustained release, which would limit administration to a single dose. Melt-processing is an emerging manufacturing method that has been utilized to create polymeric materials laden with proteins as an alternative to typical solvent-based production methods. Melt-processing is advantageous because it is continuous, solvent-free, and 100% of the therapeutic protein is encapsulated. In this study, we utilized melt-encapsulation to fabricate viral nanoparticle laden polymeric materials that effectively deliver intact particles and generate carrier specific antibodies in vivo. The effects of initial processing and postprocessing on particle integrity and aggregation were studied to develop processing windows for scale-up and the creation of more complex materials. The dispersion of particles within the PLGA matrix was studied, and the effect of additives and loading level on the release profile was determined. Overall, melt-encapsulation was found to be an effective method to produce composite materials that can deliver viral nanoparticles over an extended period and elicit an immune response comparable to typical administration schedules.
Asunto(s)
Implantes Absorbibles , Allolevivirus/química , Nanopartículas/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química , Virión/química , Allolevivirus/inmunología , Animales , Inmunización/métodos , Masculino , Ratones Endogámicos BALB C , Vacunas Virales/administración & dosificación , Vacunas Virales/inmunología , Virión/inmunologíaRESUMEN
The antibiotic erythromycin has limited efficacy and bioavailability due to its instability and conversion under acidic conditions via an intramolecular dehydration reaction. To improve the stability of erythromycin, several analogs have been developed-such as azithromycin and clarithromycin-which decrease the rate of intramolecular dehydration. We set out to build upon this prior work by developing a conjugate of erythromycin with improved pH stability, bioavailability, and preferential release from a drug delivery system directly at the low pH of an infection site. To develop this new drug conjugate, adamantane-1-carbohydrazide was covalently attached to erythromycin via a pH-degradable hydrazone bond. Since Staphylococcus aureus infection sites are slightly acidic, the hydrazone bond will undergo hydrolysis liberating erythromycin directly at the infection site. The adamantane group provides interaction with the drug delivery system. This local delivery strategy has the potential of reducing off-target and systemic side-effects. This work demonstrates the synthesis of a pH-cleavable, erythromycin conjugate that retains the inherent antimicrobial activity of erythromycin, has an increased hydrophobicity, and improved stability in acidic conditions; thereby enhancing erythromycin's bioavailability while simultaneously reducing its toxicity.
RESUMEN
Blending thermoplastic polyurethane (TPU) with poly(lactic acid) (PLA) is a proven method to achieve a much more mechanically robust material, whereas the addition of graphene oxide (GO) is increasingly applied in polymer nanocomposites to tailor further their properties. On the other hand, additive manufacturing has high flexibility of structure design which can significantly expand the application of materials in many fields. This study demonstrates the fused deposition modeling (FDM) 3D printing of TPU/PLA/GO nanocomposites and its potential application as biocompatible materials. Nanocomposites are prepared by solvent-based mixing process and extruded into filaments for FDM printing. The addition of GO largely enhanced the mechanical property and thermal stability of the nanocomposites. Interestingly, we found that the mechanical response is highly dependent on printing orientation. Furthermore, the 3D printed nanocomposites exhibit good biocompatibility with NIH3T3 cells, indicating promise as biomaterials scaffold for tissue engineering applications.
RESUMEN
Polymeric fibers have drawn recent interest for uses in biomedical technologies that span drug delivery, regenerative medicine, and wound-healing patches, amongst others. We have recently reported a new class of fibrous biomaterials fabricated using coextrusion and a photochemical modification procedure to introduce functional groups onto the fibers. In this report, we extend our methodology to control surface modification density, describe methods to synthesize multifunctional fibers, and provide methods to spatially control functional group modification. Several different functional fibers are reported for bioconjugation, including propargyl, alkene, alkoxyamine, and ketone modified fibers. The modification scheme allows for control over surface density and provides a handle for downstream functionalization with appropriate bioconjugation chemistries. Through the use of multiple orthogonal chemistries, fiber chemistry could be differentially controlled to append multiple modifications. Spatial control on the fiber surface was also realized, leading to reverse gradients of small molecule dyes. One application is demonstrated for pH-responsive drug delivery of an anti-cancer therapeutics. Finally, the introduction of orthogonal chemical modifications onto these fibers allowed for modification with multiple cell-responsive peptides providing a substrate for osteoblast differentiation.