Pharmacologically significant constituents collectively responsible for anti-sepsis action of XueBiJing, a Chinese herb-based intravenous formulation.

Sepsis, a life-threatening health issue, lacks effective medicine targeting the septic response. In China, treatment combining the intravenous herbal medicine XueBiJing with conventional procedures reduces the 28-day mortality of critically ill patients by modulating septic response. In this study, we identified the combined active constituents that are responsible for the XueBiJing's anti-sepsis action. Sepsis was induced in rats by cecal ligation and puncture (CLP). The compounds were identified based on their systemic exposure levels and anti-sepsis activities in CLP rats that were given an intravenous bolus dose of XueBiJing. Furthermore, the identified compounds in combination were assessed, by comparing with XueBiJing, for levels of primary therapeutic outcome, pharmacokinetic equivalence, and pharmacokinetic compatibility. We showed that a total of 12 XueBiJing compounds, unchanged or metabolized, circulated with significant systemic exposure in CLP rats that received XueBiJing. Among these compounds, hydroxysafflor yellow A, paeoniflorin, oxypaeoniflorin, albiflorin, senkyunolide I, and tanshinol displayed significant anti-sepsis activities, which involved regulating immune responses, inhibiting excessive inflammation, modulating hemostasis, and improving organ function. A combination of the six compounds, with the same respective doses as in XueBiJing, displayed percentage survival and systemic exposure in CLP rats similar to those by XueBiJing. Both the combination and XueBiJing showed high degrees of pharmacokinetic compatibility regarding interactions among the six active compounds and influences of other circulating XueBiJing compounds. The identification of XueBiJing's pharmacologically significant constituents supports the medicine's anti-sepsis use and provides insights into a polypharmacology-based approach to develop medicines for effective sepsis management.

Co-augmentation of a transport gene mfsT1 in Mycolicibacterium neoaurum with genome engineering to enhance ergothioneine production.

Ergothioneine (EGT) is a rare thiohistidine derivative with exceptional antioxidant properties. The blood level of EGT is considered highly reliable predictors for cardiovascular diseases and mortality, yet animals lack the ability to synthesize this compound. Free plasmids have been previously used to overexpress genes involved in the EGT biosynthetic pathway of Mycolicibacterium neoaurum. Here, we tentatively introduced a putative transporter gene mfsT1 into high-copy plasmids and sharply increased the ratio of extracellular EGT concentration from 18.7% to 44.9%. Subsequently, an additional copy of egtABCDE, hisG, and mfsT1 was inserted into the genome with a site-specific genomic integration tool of M. neoaurum, leading a 2.7 times increase in EGT production. Co-enhancing the S-adenosyl-L-methionine regeneration pathway, or alternatively, the integration of three copies of egtABCDE, hisG and mfsT1 into the genome further increased the total EGT yield by 16.1% (64.6 mg/L) and 21.7% (67.7 mg/L), respectively. After 168-h cultivation, the highest titer reached 85.9 mg/L in the latter strain with three inserted copies. This study provided a solid foundation for genome engineering to increase the production of EGT in M. neoaurum.

Improved cryptic plasmids in probiotic Escherichia coli Nissle 1917 for antibiotic-free pathway engineering.

The engineered probiotic Escherichia coli Nissle 1917 (EcN) is expected to be employed in the diagnosis and treatment of various diseases. However, the introduced plasmids typically require antibiotics to maintain genetic stability, and the cryptic plasmids in EcN are usually eliminated to avoid plasmid incompatibility which may change the inherent probiotic characteristics. Here, we provided a simple design to minimize the genetic change of probiotics by eliminating native plasmids and reintroducing the recombinants carrying functional genes. Specific insertion sites in the vectors showed significant differences in the expression of fluorescence proteins. Selected integration sites were applied in the de novo synthesis of salicylic acid, leading to a titer of 142.0 ± 6.0 mg/L in a shake flask with good production stability. Additionally, the design successfully realized the biosynthesis of ergothioneine (45 mg/L) by one-step construction. This work expands the application scope of native cryptic plasmids to the easy construction of functional pathways. KEY POINTS: • Cryptic plasmids of EcN were designed to express exogenous genes • Insertion sites with different expression intensities in cryptic plasmids were provided • Target products were stably produced by engineering cryptic plasmids.

Engineering Escherichia coli for l-homoserine production.

l-homoserine, a nonprotein amino acid, is used to synthesize many active substances in the industry. Here, to develop a robust l-homoserine-producing strain, Escherichia coli W3110 was used as a chassis to be engineered. Based on a previous construct with blocked competing routes for l-homoserine synthesis, five genes were overexpressed by promoter replacement strategy to increase the l-homoserine production, including enhancement of precursors for l-homoserine synthesis (ppc, thrA, and asd), reinforcement of the NADPH supply (pntAB) and efflux transporters (rhtA) to improve the l-homoserine production. However, the plasmid losing was to blame for the wildly fluctuating fermentation performance of engineered strains, ranging between 2.1 and 6.2 g/L. Then, a hok/sok toxin/antitoxin system was introduced into the free plasmid expression cassette to maintain the genetic stability of the episomal plasmid; consequently, the plasmid-losing rate sharply decreased, resulting in the engineered strain SHL17, which exhibited excellent stability in l-homoserine production, with 6.3 g/L in shake flasks and 44.4 g/L in a 5-L fermenter without antibiotic addition. This work verified the effective use of the hok/sok toxin/antitoxin system combined with promoter engineering to improve the genetic stability of E. coli episomal plasmids without antibiotics.

One-pot biosynthesis of 7ß-hydroxyandrost-4-ene-3,17-dione from phytosterols by cofactor regeneration system in engineered mycolicibacterium neoaurum.

BACKGROUND: 7ß-hydroxylated steroids (7ß-OHSt) possess significant activities in anti-inflammatory and neuroprotection, and some of them have been widely used in clinics. However, the production of 7ß-OHSt is still a challenge due to the lack of cheap 7ß-hydroxy precursor and the difficulty in regio- and stereo-selectively hydroxylation at the inert C7 site of steroids in industry. The conversion of phytosterols by Mycolicibacterium species to the commercial precursor, androst-4-ene-3,17-dione (AD), is one of the basic ways to produce different steroids. This study presents a way to produce a basic 7ß-hydroxy precursor, 7ß-hydroxyandrost-4-ene-3,17-dione (7ß-OH-AD) in Mycolicibacterium, for 7ß-OHSt synthesis. RESULTS: A mutant of P450-BM3, mP450-BM3, was mutated and engineered into an AD producing strain for the efficient production of 7ß-OH-AD. The enzyme activity of mP450-BM3 was then increased by 1.38 times through protein engineering and the yield of 7ß-OH-AD was increased from 34.24 mg L- 1 to 66.25 mg L- 1. To further enhance the performance of 7ß-OH-AD producing strain, the regeneration of nicotinamide adenine dinucleotide phosphate (NADPH) for the activity of mP450-BM3-0 was optimized by introducing an NAD kinase (NADK) and a glucose-6-phosphate dehydrogenase (G6PDH). Finally, the engineered strain could produce 164.52 mg L- 1 7ß-OH-AD in the cofactor recycling and regeneration system. CONCLUSIONS: This was the first report on the one-pot biosynthesis of 7ß-OH-AD from the conversion of cheap phytosterols by an engineered microorganism, and the yield was significantly increased through the mutation of mP450-BM3 combined with overexpression of NADK and G6PDH. The present strategy may be developed as a basic industrial pathway for the commercial production of high value products from cheap raw materials.

Economic optimization of expression of soluble human epidermal growth factor in Escherichia coli.

Human epidermal growth factor (hEGF) has multiple biological functions, such as promoting cell proliferation, differentiation, and migration. In addition, it is a very expensive polypeptide with attractive market prospects. However, the production of hEGF needs for high cost to manufacture polypeptide demands reinvestigations of process conditions so as to enhance economic benefits. Improving the expression of soluble hEGF is the fundamental method to reduce the cost. In this study, a non-extracellular engineered strain of expressed hEGF was constructed, using plasmid pET-22b(+) in Escherichia coli. Preliminary fermentation and high cell density cultivation were carried out in shake flasks and in a 5 L bioreactor, respectively. A high yield of 98 ± 10 mg/L of soluble hEGF and a dry cell weight (DCW) of 6.98 ± 0.3 g/L were achieved in shake flasks. Then, fermentation conditions were optimized for large-scale production, while taking into consideration the expensive equipment required for cooling and conforming to industrial standards. A yield of 285 ± 10 mg/L of soluble hEGF, a final cell density of 57.4 ± 2 g/L DCW (OD600 141.1 ± 4.9), and hEGF productivity of 14.3 mg/L/h were obtained using a bioreactor at 32 °C for 20 h. The production method developed in this study for the biosynthesis of soluble hEGF is efficient and inexpensive.

Production of sesquiterpene patchoulol in mitochondrion-engineered Saccharomyces cerevisiae.

Patchoulol is a natural sesquiterpene, which is widely used in perfumes and cosmetics. In the work, the mitochondria of S. cerevisiae were engineered for patchoulol production. The patchoulol titer of mitochondria-compartmentalized strain (1.79 mg/L) was 2.71-fold higher than that of control strain (0.66 mg/L) using genome-integrated patchoulol synthase, indicating that mitochondria compartmentation resulted in higher concentration of FPP (farnesyl pyrophosphate) precursor for patchoulol production. Moreover, when fused FPP synthase and patchoulol synthase was overexpressed in the strain with a mitochondria-localized DMAPP (dimethylallyl diphosphate) pathway, the production of patchoulol increased significantly to 19.24 mg/L, indicating more precursors were provided for patchoulol production. Nevertheless, the introduction of excess foreign proteins into mitochondria might cause a certain stress on mitochondria and showed a negative effect on the growth of yeast cells, which could hinder the expression of foreign pathways and reduce the patchoulol production. In conclusion, mitochondria-engineered yeast cells showed important potential for the enhanced biosynthesis of patchoulol, and further engineering could be considered based on the present work.

[Screening and identification of key enzyme genes for steroidal saponin biosynthesis in Dioscorea zingiberensis under low phosphorus stress].

To investigate the responses of key enzymes involved in steroidal saponin biosynthesis of Dioscorea zingiberensis to low phosphorus stress, we designed three treatments of severe phosphorus stress, moderate phosphorus stress, and normal phosphorus level. The D. zingiberensis plants were collected at the early, middle, and late stages of treatment. The content of total steroidal saponins in different tissues of D. zingiberensis was determined by spectrophotometry for the identification of the critical stage in response to low phosphorus stress. BGI 500 sequencing platform was employed to obtain the transcript information of D. zingiberensis samples at the critical stage of low phosphorus stress, and then a transcriptome library was constructed. The correlation between the expression of genes involved in steroidal saponin biosynthesis and the content of total steroidal saponins was analyzed for the screening of the key enzyme genes in response to low phosphorus stress. Further, the expression patterns of these genes were analyzed by real-time fluorescence PCR(qRT-PCR). The content of total steroidal saponins in D. zingiberensis had obvious tissue specificity under low phosphorus stress, and the early stage of stress was particularly important for D. zingiberensis to respond to low phosphorus stress. A total of 101 593 unigenes were obtained by transcriptome sequencing, of which 77.35% were annotated in NT, NR, SwissProt, KOG, GO, and KEGG. A total of 256 transcripts of known key enzyme genes in the biosynthetic pathway of steroidal saponins were identified. The expression levels of 69 transcripts encoding 18 catalytic enzymes were significantly correlated with the content of total steroidal saponins. The qRT-PCR results showed that several key enzyme genes presented different expression patterns in four tissues under low phosphorus stress. The results indicated that the content of total steroidal saponins and the expression of key enzyme genes regulating steroidal saponin biosynthesis in D. zingensis changed under low phosphorus stress. This study provides the biological information for elucidating the molecular mechanism of steroidal saponin biosynthesis in D. zingensis exposed to low phosphorus stress.

[Identification and biological characteristics of a pathogen causing leaf blight of Rehmannia glutinosa].

Leaf blight outbroke in Rehmannia glutinosa plantation in Wenxian county, Henan province in 2019. R. glutinosa plants with diseased leaves were collected from the plantation, and three strains were isolated from the diseased leaf samples. Pathogenicity test, morphological observation, and phylogenetic analysis of ITS, EF1-α, and Tub suggested that they were respectively Fusarium proliferatum, F. oxysporum, and F.acuminatum. Among them, F. acuminatum, as a pathogen of R. glutinosa leaf disease, had never been reported. To clarify the biological characteristics of F. acuminatum, this study tested the influence of light, pH, temperature, medium, carbon source, and nitrogen source on the mycelial growth rate of the pathogen during a 5-day culture period, and explored the lethal temperature. The results showed that the mycelia grew well under the photoperiod of 12 h light/12 h darkness, at 5-40 ℃(optimal temperature: 25 ℃), at pH 4-11(optimal pH: 7.0), on a variety of media(optimal medium: oatmeal agar), and in the presence of diverse carbon and nitrogen sources(optimal carbon source: soluble starch; optimal nitrogen source: sodium nitrate). The lethal temperature was verified to be 51 ℃(10 min). The conclusion is expected to lay a scientific basis for diagnosis and control of R. glutinosa leaf diseases caused by F. acuminatum.

Metabolic compartmentalization in yeast mitochondria: Burden and solution for squalene overproduction.

Harnessing mitochondria is considered as a promising method for biosynthesis of terpenes due to the adequate supply of acetyl-CoA and redox equivalents in mitochondria. However, mitochondrial engineering often causes serious metabolic burden indicated by poor cell growth. Here, we systematically analyzed the metabolic burden caused by the compartmentalization of the MVA pathway in yeast mitochondria for squalene synthesis. The phosphorylated intermediates of the MVA pathway, especially mevalonate-5-P and mevalonate-5-PP, conferred serious toxicity within mitochondria, which significantly compromised its possible advantages for squalene synthesis and was difficult to be significantly improved by routine pathway optimization. These phosphorylated intermediates were converted into ATP analogues, which strongly inhibited ATP-related cell function, such as mitochondrial oxidative respiration. Fortunately, the introduction of a partial MVA pathway from acetyl-CoA to mevalonate in mitochondria as well as the augmentation of the synthesis of mevalonate in cytosol could significantly promote the growth of yeasts. Accordingly, a combinatorial strategy of cytoplasmic and mitochondrial engineering was proposed to alleviate the metabolic burden caused by the compartmentalized MVA pathway in mitochondria and improve cell growth. The strategy also displayed the superimposed effect of cytoplasmic engineering and mitochondrial engineering on squalene production. Through a two-stage fermentation process, the squalene titer reached 21.1 g/L with a specific squalene titer of 437.1 mg/g dcw, which was the highest at present. This provides new insight into the production of squalene and other terpenes in yeasts based on the advantages of mitochondrial engineering.

Ostreibacterium oceani gen. nov., sp. nov., isolated from oyster, and description of Ostreibacteriaceae fam. nov.

A novel Gram-stain-negative, short rod-shaped, facultatively anaerobic, non-motile, non-gliding, oxidase-positive and catalase-negative bacterium, designated ML27T, was isolated from oyster homogenate in Rushan, Weihai, PR China. Growth occurred at 20-33 °C (optimum, 30 °C), at pH 7.0-9.0 (optimum, pH 7.5-8.0) and in the presence of 1-6 % (w/v) NaCl (optimum, 3 %). Phylogenetic analysis based on 16S rRNA gene sequences revealed that strain ML27T was 90.7 % similar to Suttonella ornithocola DSM 18249T, 89.2 % to Suttonella indologenes JCM 1478T and 88.2 % to Cardiobacterium hominis DSM 8339T; similarities to other species were less than 90 %. The average amino acid identity between strain ML27T, S. indologenes JCM 1478T, S. ornithocola DSM 18249T, C. hominis DSM 8339T and Dichelobacter nodosus ATCC 25549T were 46.23, 45.86, 45.54 and 45.84 %, respectively. Phylogenomic tree and phylogenetic analyses based on 16S rRNA gene sequences showed that the isolate formed a novel family-level clade in the order Cardiobacteriales. The sole respiratory quinone was ubiquinone-7 (Q-7). The dominant cellular fatty acids were summed feature 8 (C18 : 1 ω7c/C18 : 1 ω6c; 46.3 %), C16 : 0 (17.8 %) and summed feature 3 (C16 : 1 ω7c/C16 : 1 ω6c; 13.5 %). The DNA G+C content of strain ML27T was 45.6 mol%. Polar lipids included phosphatidylethanolamine, phosphatidylglycerol, diphosphatidylglycerol and one unidentified lipid. Comparative analyses of 16S rRNA gene sequences, genomic distinctiveness and characterization indicated that strain ML27T represents a novel species of a new genus within a novel family of the order Cardiobacteriales, for which the name Ostreibacterium oceani gen. nov., sp. nov. is proposed. The type strain of Ostreibacterium oceani is ML27T (=MCCC 1H00372T=KCTC 72155T). In addition, a novel family, Ostreibacteriaceae fam. nov., is proposed to accommodate the genus Ostreibacterium.

Pharmacokinetics-based identification of pseudoaldosterogenic compounds originating from Glycyrrhiza uralensis roots (Gancao) after dosing LianhuaQingwen capsule.

LianhuaQingwen capsule, prepared from an herbal combination, is officially recommended as treatment for COVID-19 in China. Of the serial pharmacokinetic investigations we designed to facilitate identifying LianhuaQingwen compounds that are likely to be therapeutically important, the current investigation focused on the component Glycyrrhiza uralensis roots (Gancao). Besides its function in COVID-19 treatment, Gancao is able to induce pseudoaldosteronism by inhibiting renal 11ß-HSD2. Systemic and colon-luminal exposure to Gancao compounds were characterized in volunteers receiving LianhuaQingwen and by in vitro metabolism studies. Access of Gancao compounds to 11ß-HSD2 was characterized using human/rat, in vitro transport, and plasma protein binding studies, while 11ß-HSD2 inhibition was assessed using human kidney microsomes. LianhuaQingwen contained a total of 41 Gancao constituents (0.01-8.56 µmol/day). Although glycyrrhizin (1), licorice saponin G2 (2), and liquiritin/liquiritin apioside (21/22) were the major Gancao constituents in LianhuaQingwen, their poor intestinal absorption and access to colonic microbiota resulted in significant levels of their respective deglycosylated metabolites glycyrrhetic acid (8), 24-hydroxyglycyrrhetic acid (M2D; a new Gancao metabolite), and liquiritigenin (27) in human plasma and feces after dosing. These circulating metabolites were glucuronized/sulfated in the liver and then excreted into bile. Hepatic oxidation of 8 also yielded M2D. Circulating 8 and M2D, having good membrane permeability, could access (via passive tubular reabsorption) and inhibit renal 11ß-HSD2. Collectively, 1 and 2 were metabolically activated to the pseudoaldosterogenic compounds 8 and M2D. This investigation, together with such investigations of other components, has implications for precisely defining therapeutic benefit of LianhuaQingwen and conditions for its safe use.

[Identification and expression analysis of NRT1 family genes in Rehmannia glutinosa].

NRT1 family proteins play an important roles for absorbing and transporting of nitrate in different plants. In order to identify the NRT1 family genes of Rehmannia glutinosa, this study used 11 NRT1 homologous proteins of Arabidopsis as probe sequences and aligned with the transcriptome data of R. glutinosa by using NCBI BLASTN software. Resulting there were 18 NRT1 proteins were identified in R. glutinosa. On basis of this, a series of the molecular characteristics of R. glutinosa NRT1 proteins including the conserved domains, the transmembrane structure, the subcellular location and phylogenetic features were in detail analyzed. At same time, it were systematically analyzed that the temporal and spatial expression patterns and characteristics of R. glutinosa NRT1 family genes in response to different stress factors. The results indicated that 18 R. glutinosa NRT1 family genes with the length of coding region from 1 260 bp to 1 806 bp, encoded proteins ranging from 419 to 601 amino acids, and all of they owned the domains of typical peptide transporter with 7 to 12 transmembrane domains. These R. glutinosa NRT1 family proteins mostly were found to locate on cellular plasma membrane, and belonged to the hydrophobic proteins. Furthermore, the evolutionary analysis found that the 18 R. glutinosa NRT1 protein family could be divided into two subfamilies, of which 14 NRT1 family genes might occur the positive selection, and 4 genes occur the passivation selection during the evolution process of R. glutinosa. In addition the expression analysis showed that 18 R. glutinosa NRT1 family genes have the distinct expression patterns in different tissues of R. glutinosa, and their expression levels were also obvious difference in response to various stress. These findings infield that 18 R. glutinosa NRT1 family proteins might have obviously different functional roles in nitrate transport of R. glutinosa. In conclusion, this study lays a solid theoretical foundation for clarifying the absorption and transport molecular mechanism of N element during R. glutinosa growth and development, and at same time for deeply studying the molecular function of R. glutinosa NRT1 proteins in absorption and transport of nitrate.

[Effects of density on growth and gene transcription characteristics of Rehmannia glutinosa].

The present study analyzed the effects of planting density on the development, quality, and gene transcription characte-ristics of Rehmannia glutinosa using 85-5 and J9 as materials with three planting densities of 5 000, 25 000, and 50 000 plants/Mu(1 Mu≈667 m~2). The agronomic characteristics of leaves and tuberous roots, the content of catalpol and acteoside, and the changes of gene expression were determined. The results showed that the leaf size, the diameter of tuberous root, leaf biomass, tuberous root number, and tuberous root biomass per plant at low density were significantly higher than those of medium and high densities. The content of catalpol and acteoside in leaves was higher at high density. The content of catalpol in tuberous roots was higher at low density, and the change trend was similar to that in leaves, while the content of acteoside in tuberous roots was higher at high density. Transcriptome analysis found that about 1/2 of the expansin genes could change regularly in response to density treatment, which was rela-ted to the development of tuberous roots. The change trend of the gene expression of multiple catalytic enzymes involved in the biosynthesis of catalpol and acteoside was consistent with that of their content, which was presumedly involved in the accumulation and regulation of density-responsive medicinal components. Based on the analysis of the development, medicinal components, and gene expression characteristics of R. glutinosa at different densities, this study is expected to provide an important basis for regulating the quality and yield of medicinal materials of R. glutinosa by managing the planting density.

The yeast peroxisome: A dynamic storage depot and subcellular factory for squalene overproduction.

Engineering microbes to produce terpenes from renewable feedstock is a promising alternative to traditional production approaches. Generally, terpenes are not readily secreted by microbial cells, and their distribution within cells is usually obscure and often a restricting factor for the overproduction of terpenes due to the storage limitation. Here, we determined that squalene overproduced in the cytoplasm of Saccharomyces cerevisiae was distributed in a form similar to oil droplets. Interestingly, these suspected oil droplets were confirmed to be inflated peroxisomes that were swollen along with the production of squalene, indicating that peroxisomes in S. cerevisiae are dynamic depots for the storage of squalene. In view of this, harnessing peroxisomes as subcellular compartments for squalene synthesis was performed, achieving a 138-fold improvement in squalene titer (1312.82 mg/L) relative to the parent strain, suggesting that the peroxisome of S. cerevisiae is an efficient subcellular factory for the synthesis of terpenes. By dual modulation of cytoplasmic and peroxisomal engineering, the squalene titer was further improved to 1698.02 mg/L. After optimizing a two-stage fed-batch fermentation method, the squalene titer reached 11.00 g/L, the highest ever reported. This provides new insight into the synthesis and storage of squalene in peroxisomes and reveals the potential of harnessing peroxisomes to overproduce terpenes in S. cerevisiae through dual cytoplasmic-peroxisomal engineering.

Labilibacter sediminis sp. nov., isolated from marine sediment.

A Gram-stain-negative, rod-shaped and facultatively anaerobic strain, designated CG51T, was isolated from marine sediment collected from a coastal area in Weihai, PR China. Strain CG51T grew at 4-37 °C (optimum, 28-30 °C), with 1.0-6.0 % (w/v) NaCl (2.0-3.0 %) and at pH 6.0-8.5 (pH 7.0-7.5). The predominant fatty acids were iso-C15 : 0, anteiso-C15 : 0 and iso-C14 : 0. Major polar lipids included an unidentified lipid and a phospholipid. The respiratory quinone was MK-7 and the genomic DNA G+C content was 35.9 mol%. The results of phylogenetic analysis based on 16S rRNA gene sequences placed strain CG51T in the genus Labilibacter with the close relatives being Labilibacter marinus Y11T and Labilibacter aurantiacus HQYD1T, exhibiting 96.5 and 96.3 % 16S rRNA pairwise similarity, values which are clearly below the 98.7 % threshold value recommended for species demarcation. Based on the phylogenetic, physiological, chemotaxonomic and genetic data, strain CG51T represents a novel species within the genus Labilibacter, for which the name Labilibacter sediminis sp. nov. is proposed. The type strain is CG51T (=MCCC 1K03739T=JCM 33138T).

Enhancing the bioconversion of phytosterols to steroidal intermediates by the deficiency of kasB in the cell wall synthesis of Mycobacterium neoaurum.

BACKGROUND: The bioconversion of phytosterols into high value-added steroidal intermediates, including the 9α-hydroxy-4-androstene-3,17-dione (9-OHAD) and 22-hydroxy-23,24-bisnorchol-4-ene-3-one (4-HBC), is the cornerstone in steroid pharmaceutical industry. However, the low transportation efficiency of hydrophobic substrates into mycobacterial cells severely limits the transformation. In this study, a robust and stable modification of the cell wall in M. neoaurum strain strikingly enhanced the cell permeability for the high production of steroids. RESULTS: The deletion of the nonessential kasB, encoding a ß-ketoacyl-acyl carrier protein synthase, led to a disturbed proportion of mycolic acids (MAs), which is one of the most important components in the cell wall of Mycobacterium neoaurum ATCC 25795. The determination of cell permeability displayed about two times improvement in the kasB-deficient strain than that of the wild type M. neoaurum. Thus, the deficiency of kasB in the 9-OHAD-producing strain resulted in a significant increase of 137.7% in the yield of 9α-hydroxy-4-androstene-3,17-dione (9-OHAD). Ultimately, the 9-OHAD productivity in an industrial used resting cell system was reached 0.1135 g/L/h (10.9 g/L 9-OHAD from 20 g/L phytosterol) and the conversion time was shortened by 33%. In addition, a similar self-enhancement effect (34.5%) was realized in the 22-hydroxy-23,24-bisnorchol-4-ene-3-one (4-HBC) producing strain. CONCLUSIONS: The modification of kasB resulted in a meaningful change in the cell wall mycolic acids. Deletion of the kasB gene remarkably improved the cell permeability, leading to a self-enhancement of the steroidal intermediate conversion. The results showed a high efficiency and feasibility of this construction strategy.

Immediate, multiplexed and sequential genome engineering facilitated by CRISPR/Cas9 in Saccharomyces cerevisiae.

A method called Cas-3P allowing for immediate, multiplexed and sequential genome engineering was developed using one plasmid expressing Cas9 and three marked plasmid backbones (P1, P2 and P3) for guide RNA (gRNA) expression. The three marked gRNA plasmid backbones were recurred in a P1-P2-P3 order for sequential gene targeting, without construction of any additional plasmid and elimination of gRNA plasmid by induction in each round. The efficiency of direct gRNA plasmid curing mediated by Cas-3P was more than 40% in sequential gene targeting. Besides, Cas-3P allowed single-, double- and triple-loci gene targeting with an efficiency of 75%, 36.8% and 8.2% within 3-4 days, respectively. Through three sequential rounds of gene targeting within 10 days, S. cerevisiae was optimized for the production of patchoulol by replacing one promoter, overexpressing three genes and disrupting four genes. The work is important for practical application in the cell factory engineering of S. cerevisiae.

Characterization and engineering control of the effects of reactive oxygen species on the conversion of sterols to steroid synthons in Mycobacterium neoaurum.

The conversion of sterols to steroid synthons by engineered mycobacteria comprises one of the basic ways for the production of steroid medications in the pharmaceutical industry. Here, we revealed that high amounts of reactive oxygen species (ROS) generate during the conversion process of sterols, which impairs the cell viability of mycobacterial cells and thus hinders the conversion of sterols to steroid synthons. Accordingly, the endogenous antioxidants for detoxifying ROS in mycobacteria, ROS scavenging enzymes and low molecular weight thiols, were examined. The results revealed that three antioxidants, catalase (CAT), mycothiol (MSH), and ergothioneine (EGT), demonstrated efficacy toward neutralizing the excessive ROS produced during sterol metabolism. CAT overexpression or MSH or EGT augmentation enhanced the conversion of phytosterols to 22-hydroxy-23,24-bisnorchol-4-ene-3-one (4-HBC) by 18.9%, 23.8%, and 32.1%, respectively, and also enhanced the cell viability, indicating the benefits of these antioxidants in reducing ROS-induced stress. Further combinatorial augmentation of CAT, MSH, and EGT demonstrated enhanced effects toward intracellular ROS scavenging, resulting in 54.2% greater cell viability and 47.5% enhancement in 4-HBC production. These findings indicated that the excessive ROS induces cell stress, in turn limiting the conversion of sterols, whereas neutralization of the excessive ROS by combined control of CAT, MSH, and EGT serves as an effective strategy to boost the conversion productivity of sterols to steroid synthons.

Motilimonas pumila sp. nov., isolated from the gut of sea cucumber Apostichopus japonicus.

A facultatively anaerobic and Gram-negative bacterium, designated strain PLHSC7-2T, was isolated from the gut of sea cucumber Apostichopusjaponicus that had been collected from the coastal area of Yantai, China. The cells were rod-shaped and motile by means of polar flagella. The novel isolate grew optimally at 28-30 °C, in the presence of 2.0-3.0 % (w/v) NaCl and at pH 7.0-7.5. The sole respiratory quinone was Q-8 and the major fatty acids were summed feature 3 (C16 : 1ω7c and/or C16 : 1ω6c), C16 : 0 and C17 : 0. The predominant polar lipids were phosphatidylethanolamine, phosphatidylglycerol and diphosphatidylglycerol. Phylogenetic analyses based on 16S rRNA gene sequences showed that strain PLHSC7-2T was phylogenetically affiliated with the genus Motilimonas, and exhibited sequence similarity of 96.2 % toMotilimonas eburnea YH6T. The DNA G+C content was 45.5 mol%. On the basis of phenotypic , phylogenetic and genetic distinctiveness, strain PLHSC7-2T (=MCCC 1K03522T=KCTC 62589T) was classified as a novel species within the genus Motilimonas, for which the name Motilimonas pumila sp. nov. is proposed.