Electrosynthesis of an Improbable Directly Bonded Phosphorene-Fullerene Heterodimensional Hybrid toward Boosted Photocatalytic Hydrogen Evolution.

Phosphorene and fullerene are representative two-dimensional (2D) and zero-dimensional (0D) nanomaterials respectively, constructing their heterodimensional hybrid not only complements their physiochemical properties but also extends their applications via synergistic interactions. This is however challenging because of their diversities in dimension and chemical reactivity, and theoretical studies predicted that it is improbable to directly bond C60 onto the surface of phosphorene due to their strong repulsion. Here, we develop a facile electrosynthesis method to synthesize the first phosphorene-fullerene hybrid featuring fullerene surface bonding via P-C bonds. Few-layer black phosphorus nanosheets (BPNSs) obtained from electrochemical exfoliation react with C602- dianion prepared by electroreduction of C60, fulfilling formation of the "improbable" phosphorene-fullerene hybrid (BPNS-s-C60). Theoretical results reveal that the energy barrier for formation of [BPNS-s-C60]2- intermediate is significantly decreased by 1.88 eV, followed by an oxidization reaction to generate neutral BPNS-s-C60 hybrid. Surface bonding of C60 molecules not only improves significantly the ambient stability of BPNSs, but also boosts dramatically the visible light and near-infrared (NIR) photocatalytic hydrogen evolution rates, reaching 1466 and 1039 µmol h-1 g-1 respectively, which are both the highest values among all reported BP-based metal-free photocatalysts.

Simultaneous Ring Contraction and Expansion Reaction: Electrosynthesis of Heterocycle-Fused Fulleroids and Photovoltaic Application.

Simultaneous electrochemical ring contraction and expansion reactions remain unexplored to date. Herein, the reductive electrosynthesis of heterocycle-fused fulleroids from fullerotetrahydropyridazines and electrophiles in the presence of a trace amount of oxygen has been achieved with concurrent ring contraction and ring expansion. When trifluoroacetic acid and alkyl bromides are employed as electrophiles, heterocycle-fused fulleroids with a 1,1,2,6-configuration are regioselectively formed. In contrast, heterocycle-fused fulleroids with a 1,1,4,6-configuration are regioselectively produced as two separable stereoisomers if phthaloyl chloride is used as the electrophile. The reaction proceeds through multiple steps of electroreduction, heterocycle ring-opening, oxygen oxidation, heterocycle contraction, fullerene cage expansion, and nucleophilic addition. The structures of these fulleroids have been determined by spectroscopic data and single-crystal X-ray diffraction analyses. The observed high regioselectivities have been rationalized by theoretical calculations. Representative fulleroids have been applied in organic solar cells as the third component and exhibit good performance.

Dearomative Ring-Fused Azafulleroids and Carbazole-Derived Metallofullerenes: Reactivity Dictated by Encapsulation in a Fullerene Cage.

Herein, we report divergent additions of 2,2'-diazidobiphenyls to C60 and Sc3 N@Ih -C80 . In stark contrast to that of the previously reported bis-azide additions, the unexpected cascade reaction leads to the dearomative formation of azafulleroids 2 fused with a 7-6-5-membered ring system in the case of C60 . In contrast, the corresponding reaction with Sc3 N@Ih -C80 switches to the C-H insertion pathway, thereby resulting in multiple isomers, including a carbazole-derived [6,6]-azametallofulleroid 3 and a [5,6]-azametallofulleroid 4 and an unusual 1,2,3,6-tetrahydropyrrolo[3,2-c]carbazole-derived metallofullerene 5, whose molecular structures have been unambiguously determined by single-crystal X-ray diffraction analyses. Among them, the addition type of 5 is observed for the first time in all reported additions of azides to fullerenes. Furthermore, unexpected isomerizations from 3 to 5 and from 4 to 5 have been discovered, providing the first examples of the isomerization of an azafulleroid to a carbazole-derived fullerene rather than an aziridinofullerene. In particular, the isomerism of the [5,6]-isomer 4 to the [5,6]-isomer 5 is unprecedented in fullerene chemistry, contradicting the present understanding that isomerization generally occurs between [5,6]- and [6,6]-isomers. Control experiments have been carried out to rationalize the reaction mechanism. Furthermore, representative azafulleroids have been applied in organic solar cells, thereby resulting in improved power conversion efficiencies.

Solvent-Free Mechanosynthesis of Polysubstituted 1,2-Dihydroquinolines from Anilines and Alkyne Esters.

A novel one-pot reaction of anilines with acetylenedicarboxylate diesters in the presence of boron trifluoride, iodine, and trifluoroacetic acid or methylsulfonic acid has been developed under solvent-free ball-milling conditions, affording a variety of polysubstituted 1,2-dihydroquinolines bearing multiple ester groups in moderate to excellent yields. The present protocol features mild reaction conditions, short reaction time, and feasibility of large-scale synthesis, providing a facile and practical alternative to 1,2-dihydroquinoline synthesis. Intriguingly, the generated 1,2-dihydroquinolines can be further transformed into quinoline derivatives.

Palladium-Catalyzed Three-Component 1,4-Alkoxyarylation Reaction of [60]Fullerene.

The palladium-catalyzed three-component alkoxyarylation reaction of [60]fullerene with primary/secondary alcohols and aryl iodides generates a series of 1,4-(alkoxy)(aryl)[60]fullerene derivatives. Plausible reaction pathways for the formation of 1,4-(alkoxy)(aryl)[60]fullerenes are proposed. In addition, the electrochemical properties of the synthesized 1,4-alkoxyarylation adducts are investigated.

Palladium-Catalyzed C-H Activation/Cyclization for the Synthesis of [60]Fullerene-Fused Phosphinolactones.

A novel and efficient palladium-catalyzed C-H activation reaction of [60]fullerene with arylphosphinic acids has been developed for the synthesis of [60]fullerene-fused phosphinolactones. A possible reaction mechanism is proposed to explain the generation of the obtained products. A representative product can be further electrochemically transformed into bis-benzylated 1,2- and 1,4-adducts of [60]fullerene. In addition, a [60]fullerene-fused phosphinolactone with a 12-membered ring can also be synthesized from the electrochemical ring expansion of the employed phosphinolactone with a 6-memebered ring with 1,2-bis(bromomethyl)benzene.

Copper-mediated synthesis of fullerooxazoles from [60]fullerene and N-hydroxybenzimidoyl cyanides.

A novel and efficient copper-mediated [3 + 2] heteroannulation reaction of [60]fullerene with N-hydroxybenzimidoyl cyanides has been developed for the synthesis of fullerooxazoles. A possible reaction mechanism involving unique C-CN and N-OH bond cleavages and subsequent C-OH bond formation for N-hydroxybenzimidoyl cyanides is proposed to explain the generation of fullerooxazoles. In addition, the formed fullerooxazoles can be further electrochemically transformed into amidated 1,2-hydrofullerenes.

Mechanochemical Dimerization of Aldoximes to Furoxans.

Solvent-free mechanical milling is a new, environmentally friendly and cost-effective technology that is now widely used in the field of organic synthesis. The mechanochemical solvent-free synthesis of furoxans from aldoximes was achieved through dimerization of the in situ generated nitrile oxides in the presence of sodium chloride, Oxone and a base. A variety of furoxans was obtained with up to a 92% yield. The present protocol has the advantages of high reaction efficiency and mild reaction conditions.

A 4-Arm Small Molecule Acceptor with High Photovoltaic Performance.

Manipulating the backbone of small molecule acceptors (SMAs) is of particular importance in developing efficient organic solar cells (OSCs). The common design is constructing 2-arm SMAs with linear or curved backbones. Herein, we report an acceptor 4A-DFIC with a 4-arm backbone unexpectedly generated in the reaction of an electron-rich aromatic diamine and hexaketocyclohexane. Single-crystal X-ray diffraction analysis indicates the rigid and twisted molecular plane and the effective molecular stacking of 4A-DFIC in solid state. 4A-DFIC shows a low band gap of 1.40 eV and excellent light-harvesting capability from visible to near-infrared region. Binary and ternary OSCs based on 4A-DFIC gave power conversion efficiencies (PCEs) of 15.76 % and 18.60 % (certified 18.1 %), respectively, which are the highest PCEs for multi-arm SMA-based OSCs to date.

Mechanochemical Solvent-Free Synthesis of Indenones from Aromatic Carboxylic Acids and Alkynes.

The mechanochemical solvent-free synthesis of indenones from aromatic carboxylic acids and alkynes was achieved through triflic anhydride (Tf2O)-induced cyclization reaction. A variety of indenones including a bioactive PPARγ agonist were obtained in up to 90% yield at room temperature. The present protocol has the advantages of mild reaction conditions, high reaction efficiency, and feasibility of scalable synthesis, providing a facile and sustainable route to diverse indenones.

Anomalous Cis-Conformation Regioselectivity of Heterocycle-Fused Sc3 N@D3h -C78 Derivatives.

Endohedral clusterfullerenes exhibit unique chemical properties due to intramolecular electron transfer of the encaged metal cluster to the outer fullerene cages. We report the synthesis of two Sc3 N@D3h -C78 monoadducts 2 a and 2 b through the 1,3-dipolar reaction of Sc3 N@D3h -C78 with carbonyl ylide bearing anomalous cis-conformation regioselectivity. The molecular structures of these monoadducts are unambiguously confirmed by single-crystal X-ray crystallography, revealing that both 2 a and 2 b have cis-conformations with the furan moiety grafted via [6,6]-closed addition patterns. Under the same conditions, the control reaction of C60 with carbonyl ylide affords two monoadducts 3 a and 3 b, which exhibit cis- and trans-conformations, respectively, with [6,6]-closed addition patterns. According to theoretical calculations, the exclusive formation of the cis-only Sc3 N@D3h -C78 monoadducts is a consequence of conjunct effects of thermodynamic stability of adducts, the reactivity of the addition site, and the cis-dipole intermediate from trans 1.

Alternative Access to Cyclopentafullerenes through the Reaction of [60]Fullerene with Aldehydes and Secondary Amines.

A series of cyclopentafullerenes have been synthesized in high stereoselectivity by the thermal reaction of [60]fullerene with aldehydes and secondary amines. Both α,ß-unsaturated aldehydes and saturated aldehydes can be utilized to synthesize cyclopentafullerenes as the cis isomers. The possible reaction mechanisms for the formation of cyclopentafullerenes are proposed on the basis of the experimental results.

Electrochemical regioselective alkylations of a [60]fulleroindoline with bulky alkyl bromides.

Electrochemical alkylations of a [60]fulleroindoline with different bulky alkyl bromides exhibit different reaction behaviors. The hydroalkylation and dialkylation of the electrochemically generated dianionic [60]fulleroindoline with bulky 2,4,6-tris(bromomethyl)mesitylene give rise to 1,2,3,16-adducts. In comparison, the hydroalkylation of the dianionic [60]fulleroindoline with bulkier diphenylbromomethane still affords a 1,2,3,16-adduct, while the corresponding dialkylation provides a sterically favoured 1,4,9,12-adduct, which is scarcely investigated, as the major product along with the isomeric 1,2,3,16-adduct as the minor product. The structures of these products have been determined by spectroscopic data and single-crystal X-ray diffraction analysis. A plausible reaction mechanism has been proposed to explain the formation of the observed products.

Reaction of Aldoximes with Sodium Chloride and Oxone under Ball-Milling Conditions.

The solvent-free mechanochemical reaction has aroused increasing interest among scientists. Mechanical ball-milling can implement reactions under mild conditions, shorten the reaction time, and improve the reaction efficiency. Particularly, the most attractive characteristic of mechanochemistry is that it can alter the reaction pathway. However, few such examples have been reported so far. In this paper, we report the reaction of aldoximes with NaCl and Oxone under ball-milling conditions to afford N-acyloxyimidoyl chlorides, which are different from those of the liquid-phase counterpart.

Diastereoselective Synthesis of Oxazoloisoindolinones via Cascade Pd-Catalyzed ortho-Acylation of N-Benzoyl α-Amino Acid Derivatives and Subsequent Double Intramolecular Cyclizations.

The first cascade diastereoselective synthesis of oxazoloisoindolinones via the palladium-catalyzed decarboxylative ortho-acylation of N-benzoyl α-amino acid derivatives followed by double intramolecular cyclizations has been demonstrated. This reaction, using α-amino acids as directing groups and α-oxocarboxylic acids as the acylation source, features a broad substrate scope, good functional group tolerance, high regioselectivity, and excellent diastereoselectivity.

Visible-light-induced decarboxylative sulfonylation of cinnamic acids with sodium sulfinates by using Merrifield resin supported Rose Bengal as a catalyst.

A visible-light-induced decarboxylative sulfonylation of cinnamic acids with sodium sulfinates for the synthesis of vinyl sulfones was developed. The reaction proceeded smoothly in the presence of Merrifield resin supported Rose Bengal ammonium salt as a photocatalyst and tert-butyl hydroperoxide (70% in water) as an oxidant in aqueous DMSO solution at room temperature under green LED (530-535 nm) irradiation under an air atmosphere, generating the desired products in good yields. Notably, the supported catalyst can easily be separated from the reaction mixture by filtration and can be recycled at least six times without any significant loss of activity.

Azide Passivation of Black Phosphorus Nanosheets: Covalent Functionalization Affords Ambient Stability Enhancement.

Two-dimensional (2D) black phosphorus (BP) has a unique band structure, but it suffers from low ambient stability owing to its high reactivity to oxygen. Covalent functionalization has been demonstrated to passivate the reactive BP effectively, however the reported covalent functionalization methods are quite limited to aryl diazonium and nucleophilic additions affording P-C and P-O-C single bonds, for which the retaining of one unpaired electron in the Group 15 phosphorus atom hampers the passivation effect. Now, covalent azide functionalization of BP nanosheets (BPNSs) is reported, leading to significant enhancement of the ambient stability of BP as confirmed by UV/Vis spectroscopic studies. The most stable configuration of the azide functionalized BPNSs (f-BPNSs) is predicted by theoretical calculations, featuring the grafting of benzoic acid moiety onto BPNSs via the unprecedented P=N double bonds formed through in situ nitrene as a reactive intermediate.

Synthesis of Fullerotetrahydroquinolines via [4 + 2] Cycloaddition Reaction of [60]Fullerene with in Situ Generated Aza-o-quinone Methides.

An efficient [4 + 2] cycloaddition reaction of [60]fullerene with the in situ generated aza-o-quinone methides from N-(o-chloromethyl)aryl sulfonamides with the assistance of Cu2O has been developed to afford a series of fullerotetrahydroquinolines. This strategy exhibits a broad substrate scope and excellent functional group tolerance. A tentative reaction pathway for the formation of fullerotetrahydroquinolines is proposed on the basis of the experimental results.

One-Pot Multicomponent Mechanosynthesis of Polysubstituted trans-2,3-Dihydropyrroles and Pyrroles from Amines, Alkyne Esters, and Chalcones.

An efficient and practical one-pot multicomponent reaction of amines with alkyne esters and chalcones promoted by I2/PhI(OAc)2 has been developed under solvent-free ball-milling conditions to afford a variety of polysubstituted trans-2,3-dihydropyrroles in moderate to good yields. The present method features a short reaction time, mild reaction conditions, broad substrate scope, and feasibility of large-scale synthesis. Intriguingly, this protocol can also furnish the corresponding synthetically more attractive pyrroles with the addition of an oxidant in a one-pot way.

Nickel-catalyzed regioselective arylation of aromatic amides with aryl iodides enabled by an N,O-bidentate directing group.

A bidentate directing group enabled regioselective arylation of C(sp2)-H bonds in aromatic carboxamides with aryl iodides under nickel-catalysis is reported, which provides the corresponding products in moderate to good yields. This protocol using the inexpensive and low-toxic Ni catalyst can tolerate a wide range of functional groups.