Tumor margin irregularity degree is an important preoperative predictor of adverse pathology for clinical T1/2 renal cell carcinoma and the construction of predictive model.

PURPOSE: To explore the critical role of the tumor margin irregularity degree (TMID) of renal tumors in predicting adverse pathology of patients with clinical T1/2 (cT1/2) renal cell carcinoma (RCC). METHODS: A total of 821 patients with cT1/2 RCC undergoing nephrectomy in the Second Hospital of Tianjin Medical University between January 2017 and December 2020 were reviewed. The tumor margin irregularity (TMI) was classified into renal mass with locally raised protrusion and smooth margin called 'lobular', sharply and unsmooth nodular margin called 'spiculation', blurred margins between tumor and renal parenchyma or a completely irregular and non-elliptical shape. The ratio between the number of irregular cross-sections (X) and the number of total cross-sections from top to bottom occupied (Y) was defined as TMID (X/Y). The logistic regression was performed to determine the independent predictors of adverse pathology, and the Kaplan-Meier curve and log-rank test were used to analyze the survival outcomes. RESULTS: Among 821 cT1/2 RCC patients, 245 (29.8%) had adverse pathology. The results of the univariate and multivariate logistic regressions showed that the age, tumor size, hemoglobin, and TMID were the independent predictors of adverse pathology. Incorporation of TMID could increase the discrimination of the predictive model with the area under curve (AUC) of ROC curves increasing from 0.725 to 0.808. Patients with adverse pathology or higher TMID both had significantly shorter recurrence-free survival (RFS). CONCLUSION: The nomogram model incorporated with TMID for predicting adverse pathology could increase its discrimination, calibration, and clinical application values, compared with the models without TMID.

Highly Sensitive Detection of Formaldehyde by Laser-Induced Graphene-Coated Silver Nanoparticles Electrochemical Sensing Electrodes.

Formaldehyde (HCHO) poses a grave threat to human health because of its toxicity, but its accurate, sensitive, and rapid detection in aqueous solutions remains a major challenge. This study proposes a novel electrochemical sensor composed of a graphene-based electrode that is prepared via laser induction technology. The precursor material, polyimide, is modified via the metal ion exchange method, and the detective electrode is coated with graphene and silver nanoparticles. And the special structure of graphene-coated Ag was demonstrated using scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD), Fourier transform infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS) results show that graphene provides more sites for Ag NRs to be exposed and increases the surface area of contact between the solution and the detection object. In addition, differential pulse voltammetry (DPV) analysis exhibits high linearity over the HCHO concentration range from 0.05 to 5 µg/mL, with a detection limit of 0.011 µg/mL (S/N = 3). The Ag NPs in the electrochemical reaction will adsorb the intermediate •CO and •OH, catalyze their combination, and finally convert to CO2 and H2O, respectively. A microdetection device, specially designed for use with commercial micro-workstations, is employed to fully demonstrate the practical application of the electrode, which paves a way for developing formaldehyde electrochemical sensors.

Current status and future challenges in extraction, purification and identification of Cepharanthine (a potential drug against COVID-19).

With the outbreak of the new coronavirus disease 2019 (COVID-19), the rapid spread of the virus has brought huge economic losses and life threats to the world. So far, we have entered the third year of the epidemic and there is an urgent need to provide more anti-viral treatment along with vaccination. Recent studies have confirmed that Cepharanthine (CEP) has strong antiviral efficacy, which is a potential drug against COVID-19. As a natural active alkaloid, the development of CEP-incorporated products is dependent on the extraction, purification and identification of CEP. This review gives a brief introduction of CEP, including its origin and classification, and its conventional and novel extraction techniques. In addition, the purification and identification techniques are summarized. In the last, the future research directions are proposed. It can be found from this review that the extraction from plants is still the main way to obtain CEP, and it is necessary to use innovative techniques and their hybrid extractions to extract CEP. More efficient extraction and purification techniques should be used to extract CEP in the future. This review provides a basis for the development of novel extraction and purification techniques and industrial utilization of CEP.

Pseudouridylate Synthase 7 Promotes Cell Proliferation and Invasion in Colon Cancer Through Activating PI3K/AKT/mTOR Signaling Pathway.

BACKGROUND: Colorectal cancer is commonly malignant tumor. Herein, we demonstrate that pseudouridylate synthase 7 (PUS7) is closely related to colon cancer. But the biological role of PUS7 in colon cancer is not known. AIMS: The present study aims to investigate the effects of PUS7 in colon cancer clinical samples and cells and the related molecular mechanism. METHODS: A profile data set was downloaded from the Cancer Genome Atlas database, which included data from colon cancer tissue samples and normal tissue samples. The top 200 differentially expressed genes were subsequently investigated by a protein-protein interaction (PPI) network. RT-PCR and western blot assays were used to determine gene expression levels. CCK8 assay, colony formation experiment, transwell and flow cytometry assay were used to determine cell viability, proliferation, invasion, and apoptosis, respectively. RESULTS: PUS7 is a key gene from the most significant module of the PPI network. PUS7 was upregulated in colon cancer tissues and cell lines. Moreover, PUS7 overexpression is significantly related to the poor survival rate for 60 colon cancer's patients. Cell proliferation and invasion was significantly reduced by PUS7 inhibition and promoted by PUS7 overexpression. The protein levels of cleaved caspase-3/9, c-myc, E-cadherin and vimentin genes were significantly regulated in colon cancer cells transfected with PUS7 interference or overexpression. PUS7 overexpression significantly upregulated the phosphorylation levels of PI3K, AKT and mTOR. CONCLUSION: The results of this study demonstrate that PUS7 overexpression upregulates cell proliferation, invasion and inhibits cell apoptosis of colon cancer cells via activating PI3K/AKT/mTOR signaling pathway.

Identification of osteosarcoma by microRNA-coupled nuclease digestion on interdigitated electrode sensor.

Osteosarcoma is a type of tumor originating from the bone cells, most often from long bones. Children and adolescents are mainly affected by osteosarcoma. Identifying the condition with osteosarcoma is mandatory to provide proper treatment to the affected patients. This research work has introduced an identification of an osteosarcoma biomarker "miRNA-21" on the interdigitated electrochemical sensor by nuclease digestion. The target RNA sequence of miRNA-21 was hybridized to the capture DNA and placed on the sensing electrode surface with the aid of the biotin-streptavidin interaction. The unhybridized immobilized single-standard capture DNA was digested by S1-nuclease. The current response of the digestion level was considered as the duplex formation between the target and capture DNA. Using this technique, the detection limit of the target was reached to 1 fM and a similar response of current was noted with the target RNA-spiked human serum, indicating the selective identification of target RNA. Further, single mismatched, triple mismatched, and random miRNA sequences (miRNA-195) failed to interact with the immobilized capture DNA, representing the specific identification of target RNA. This nuclease digestion technique with miRNA-21 identification helps in detecting osteosarcoma and related issues.

Prognostic significance of occult lymph node metastases in breast cancer: a meta-analysis.

BACKGROUND: Occult metastases in axillary lymph nodes have been reported to be associated with poor prognosis in patients with breast cancer. However, studies on the prognostic value of occult metastases have shown controversial results. This meta-analysis aimed to evaluate the prognostic significance of occult lymph node metastases in breast cancer. METHODS: Studies published until May, 2020, which retrospectively examined negative lymph nodes by stepsectioning and/or immunohistochemistry, were retrieved from MEDLINE, EMBASE, CNKI, and Cochrane Library databases. The pooled Relative Risk (RR) with 95% confidence interval (95% CI) for overall survival (OS) and disease-free survival (DFS) were calculated to examine the associations between occult metastases and prognosis. RESULTS: Patients with occult metastases in axillary lymph nodes had poorer five-year DFS (RR = 0.930; 95% CI = 0.907-0.954) and OS (RR = 0.972; 95% CI = 0.954-0.990). Furthermore, the DFS (RR = 0.887; 95% CI = 0.810-0.972) and OS (RR = 0.896; 95% CI = 0.856-0.939) of patients with occult metastases were significantly lower after a ten-year follow-up. CONCLUSIONS: Occult metastases in the axillary lymph nodes are associated with poorer DFS andOS of patients with breast cancer. Occult metastases might serve as a predictive factor of survival outcomes in patients with breast cancer.

Enhanced stability of silver nanowire transparent conductive films against ultraviolet light illumination.

Silver nanowires are susceptible to degradation under ultraviolet (UV) light illumination. Encapsulating silver nanowire transparent conductive films (AgNW TCFs) with UV shielding materials usually result in the increasing of the sheet resistance or the decrease of the visible light transparency. Herein, we combine a reducing species (FeSO4) and a thin layer (overcoating) of UV shielding material to solve the stability and the optical performance issues simultaneously. The AgNW TCFs show excellent stability under continuous UV light illumination for 14 h, and their sheet resistance varies only 6%. The dramatic enhancement of the stability against UV light illumination for as-obtained TCFs will make them viable for real-world applications in touch panels and displays.

Preparation and performance evaluation of novel magnetic porous carriers in fluidized bed bioreactor for wastewater treatment.

Biofilm process is a promising wastewater treatment technology and biofilm carrier (biocarrier) is regarded as the core of this process. However, the traditional commercial biocarriers have their inherent drawbacks, therefore, the development of new-type biocarrier to enhance wastewater treatment efficiency is significantly important to biofilm-based reactors. In this study, based on radical suspension polymerization, a novel kind of magnetic porous carriers (PMCs) was prepared by modifying the porous polymer carriers (PPCs) with inorganic particles, and then applied in a fluidized bed bioreactor (FBBR) with a low packing ratio of 10 % (v/v) to synthetic wastewater treatment. The results showed that this novel biocarrier possesses paramagnetism with saturation magnetization of 1.01emu/g, low density (1.26 g/cm3), excellent hydrophilicity (surface water contact angle approaching zero) and rough surface. Besides, compared with the PPCs, the developed PMCs have larger pores (up to 50 µm or more), in which the larger-sized microbes are able to colonize. Moreover, as compared to the PPCs-based FBBR, the PMCs-based reactor achieved shorter time (7 days) for biofilm formaiton and significantly enhanced NH3-N removal efficiency ( nearly 20 % increase at the level of influent NH3-N concentration about 100 mg/L). High-throughput sequencing (HTS) results indicated that this new biocarrier could promote biodiversity and improve the abundance of Nitrosomonadales (the functional bacteria for ammonia removal in the bio-system), thus enhancing the ammonification process. Therefore, the developed PMCs could be preferable biocarriers for biofilm formation and provide an alternative to the traditional suspended biocarrier, demonstrating a promising potential, even at a lower filling ratio, to enhance the pollutants removal performance.

Overexpression of GmSUMO2 gene confers increased abscisic acid sensitivity in transgenic soybean hairy roots.

Small ubiquitin-like modifier (SUMO) participates in post-translational modification of various target proteins. SUMOylation is an important molecular regulatory mechanism for plants to respond to abiotic stress. In the present study, GmSUMO2 gene was isolated from soybean seedlings for further study because of the highest expression level among these six SUMO genes in soybean. qRT-PCR results showed that GmSUMO2 gene were detected in root, leaf, cotyledon, seed root, flower, pod and seed, with the highest transcription level in cotyledon. Moreover, GmSUMO2 gene was transcriptionally regulated by 200 mM NaCl, 42 °C, 25 µM abscisic acid (ABA) and 20% PEG6000 during the 24 h period of treatment. Besides, western blot analysis using AtSUMO1 antibody indicated that the free SUMO levels and SUMOylation dynamics were regulated by ABA stimulus. Functional analysis indicated that overexpression of GmSUMO2 gene in soybean hairy roots accentuated the sensitivity to exogenous ABA. Furthermore, the expression levels of ABI3, ABI5, SnRK1.1 and SnRK1.2 were differentially regulated by GmSUMO2 in transgenic soybean hairy roots. Overall, these results provided a preliminary understanding of molecular characterization, expression and function of GmSUMO2 in soybean.

Short-Term Hypoxia Accelerates Bone Loss in Ovariectomized Rats by Suppressing Osteoblastogenesis but Enhancing Osteoclastogenesis.

BACKGROUND Although it has been reported that hypoxic exposure can attenuate hypertension, heart disease, diabetes, and some other diseases, effects of hypoxia on osteoporosis are still unknown. MATERIAL AND METHODS The current study investigated whether short-term hypoxic exposure (in comparison with normoxic conditions) affects bone metabolism in normal or ovariectomized (OVX) adult female rats in an vivo study. Micro-computed tomography bone volume/structural analyses, histological examination, and serum bone turnover biochemical assays were used. In addition, the expressions of some associated major regulatory molecules were measured in osteoblastic cultures. RESULTS While the 14-day hypoxic exposure did not change the bone-remodeling process in normal adult female rats, it decreased bone volume, osteoclast density, and serum bone formation marker (alkaline phosphatase) level, but increased osteoclast density and serum bone resorption marker (C-telopeptide of collagen) level in OVX rats. The bone marrow adipocyte number and serum fatty acid binding protein-4 level were increased in OVX-hypoxic rats compared with OVX-normoxic rats. Consistently, in human MG-63 osteoblastic cultures, the hypoxic condition suppressed protein expression of osteogenic transcriptional factors Runx2 and osterix, elevated protein expression of osteoclastogenic cytokine receptor activator of nuclear factor kappa-B ligand, but reduced that of osteoclastogenic inhibitor osteoprotegerin. CONCLUSIONS Our results suggest that, although no change occurred in the bone-remodeling process in normal adult female rats after hypoxic exposure, under the estrogen-deficient osteoporotic condition, the hypoxic condition can alter the bone microenvironment so that it may further impair osteoblastic differentiation and enhance osteoclastic formation, and thus reduce bone formation, enhance bone resorption, and accelerate bone loss.

A Perspective on Uniform Plating Behavior of Mg Metal Anode: Diffusion Limited Theory versus Nucleation Theory.

Utilizing metal anode is the most attractive way to meet the urgent demand for rechargeable batteries with high energy density. Unfortunately, the formation of dendrites, which is caused by uneven plating behavior, always threaten the safety of the batteries. To explore the origin of different plating behavior and predict the plating morphology of anode under a variety of operating conditions, multifarious models have been developed. However, abuse of models has led to conflictive views. In this perspective, to clarify the controversial reports on magnesium (Mg) metal plating behavior, the previously proposed models are elaborated that govern the plating process. Through linking various models and clarifying their boundary conditions, a scheme is drawn to illustrate the strategy for achieving the most dense and uniform plating morphology, which also explains the seemingly contradictory of diffusion limited theory and nucleation theory on uniform plating. This perspective will undoubtedly enhance the understanding on the metal anode plating process and provide meaningful guidance for the development of metal anode batteries.

Structural Engineering of Anode Materials for Low-Temperature Lithium-Ion Batteries: Mechanisms, Strategies, and Prospects.

The severe degradation of electrochemical performance for lithium-ion batteries (LIBs) at low temperatures poses a significant challenge to their practical applications. Consequently, extensive efforts have been contributed to explore novel anode materials with high electronic conductivity and rapid Li+ diffusion kinetics for achieving favorable low-temperature performance of LIBs. Herein, we try to review the recent reports on the synthesis and characterizations of low-temperature anode materials. First, we summarize the underlying mechanisms responsible for the performance degradation of anode materials at subzero temperatures. Second, detailed discussions concerning the key pathways (boosting electronic conductivity, enhancing Li+ diffusion kinetics, and inhibiting lithium dendrite) for improving the low-temperature performance of anode materials are presented. Third, several commonly used low-temperature anode materials are briefly introduced. Fourth, recent progress in the engineering of these low-temperature anode materials is summarized in terms of structural design, morphology control, surface & interface modifications, and multiphase materials. Finally, the challenges that remain to be solved in the field of low-temperature anode materials are discussed. This review was organized to offer valuable insights and guidance for next-generation LIBs with excellent low-temperature electrochemical performance.

Treatment of Complex Central Talar Fractures with Lateral Plate Combination with Medial Screw Fixation.

OBJECTIVE: The treatment of talar neck and/or body fractures is known to be difficult and challenging, with significant impact on the long-term functional outcome for the patient. The optimal management, including the choice of surgical approaches and implants, are still under constant discussion. The purpose of the study was to investigate the clinical effects of lateral mini-plate combined with medial lag screws for the treatment of complicated central talar fractures. METHODS: The data of eight patients with complex central talus fractures treated between June 2019 and January 2021 were retrospectively analyzed. There were six males and two females, ranging in age from 15 to 66 years, with an average age of 37.4 years. There were three cases on the left and five cases on the right. All fractures were comminuted, including talar neck with talar body fracture in seven cases and talar body comminuted with subluxation of subtalar joint in one case. All patients were treated with the anteromedial combined anterolateral approach, lateral talar mini-plate fixation and medial lag screw fixation. Fracture reduction quality, union time, and complications were recorded, and functional outcomes were evaluated using the American Orthopedic Foot & Ankle Society (AOFAS) scoring system. RESULTS: The time from injury to surgery was 1-6 days, with an average of 3.38 days. The follow-up period was 34-53 months (mean 44.88 months). All fractures healed with a mean healing time of 16.75 weeks (13-23 weeks). Anatomical reduction was observed in six cases and near in two cases. After operation, there was no loosening or breakage of implant, loss of fracture reduction, and irritation of skin and soft tissue by internal fixation. The average AOFAS score was 87.38 (48-100), with excellent five cases, good two cases and poor one case, and the excellent and good rate was 87.5%. Superficial skin necrosis in one surgical incision healed after dressing exchange. No deep infection occurred. One case (1/8, 12.5%) developed avascular necrosis of the talus without collapse. Posttraumatic arthritis was found in four cases (4/8, 50%). CONCLUSION: The utilization of lateral mini-plates in combination with medial screws for treating complex central talar fractures results in satisfactory reduction and stable fixation, mitigating complications associated with poor reduction. However, due to the absence of an anatomical mini-plate, pre-contouring is necessary when applying the lateral plate. This demands a surgeon's thorough familiarity with the anatomical morphology of the talus and proficiency in surgical techniques. Posttraumatic arthritis is the most common complication of complex central talar fractures.

Comparison between intramedullary nail and conventional plate for displaced intra-articular calcaneal fractures: A meta-analysis.

OBJECTIVES: This study aimed to compare the efficacy and safety of the intramedullary nail and conventional plate for the treatment of displaced intra-articular calcaneal fractures from clinical comparative trials. MATERIALS AND METHODS: A comprehensive search of English databases was carried out in the Springer, PubMed, ScienceDirect, Web of Science, and Cochrane Library databases until September 2023. Studies on calcaneal fractures treated by an intramedullary nail or a plate were considered for inclusion. Endpoints included duration of operation, length of hospital stay, the Visual Analog Scale (VAS) score, postoperative functional score, radiological parameters, and complications. The mean difference (MD) and risk difference (RD) as the combined variables, as well as the 95% confidence intervals, (CIs) were calculated. RESULTS: Five retrospective controlled studies covering 473 feet at the one-year follow-up met the inclusion criteria. The meta-analysis demonstrated that there were significant differences in the duration of operation (MD: -10.81; 95% CI: -16.32, -5.31; p=0.0001), length of hospital stay (MD: -3.65; 95% CI: -4.35, -2.95; p<0.00001). No significant differences were found regarding postoperative American Orthopaedic Foot and Ankle Society (AOFAS) Ankle-Hindfoot Scale (MD: 0.36; 95% CI: -3.89, 4.61; p=0.87), VAS (MD: 1.95; 95% CI: -0.30, 4.21; p=0.09), or postoperative Böhler angle (MD: 0.94; 95% CI: -0.04, 1.92; p=0.06) between the two groups. The incidence of total complications (RD: -0.31; 95% CI: -0.46, -0.17; p<0.0001) and wound-healing complications (RD: -0.16; 95% CI: -0.30, -0.03; p=0.02) were lower in the intramedullary nail group. There were no significant differences in the incidences of revision surgery, implant removal, superficial wound infection, deep infection, and nonunion. CONCLUSION: Compared to conventional plates, the intramedullary nail showed a shorter duration of operation, reduced length of hospital stay, and fewer postoperative total complications and wound-healing complications in treating displaced intra-articular calcaneal fractures.

Comparison of different internal fixation implants in the treatment of talar neck fractures: A finite element analysis.

OBJECTIVES: This study aimed to analyze the biomechanics of cannulated screws (CS) with or without a lateral locking plate (LLP) in talar neck fractures through a finite element analysis. PATIENTS AND METHODS: The computed tomography image of the talus from a healthy volunteer (adult male) was used to reconstruct a three-dimensional talar model. The method for fixing talar neck fractures with CS and an LLP was planned using computer-aided design software. Afterward, the three-dimensional models of comminuted talar neck fractures were used to simulate fixation with anteroposterior parallel dual CS, single CS+LLP, and dual CS+LLP. Finally, finite element analysis was carried out to compare the outcomes of dual CS+LLP to those of single CS+LLP and to those of using dual CS alone. The displacement and von Mises stress values of the three groups with different internal fixation were analyzed. RESULTS: For a simple talar neck fracture, the lowest amount of displacement was obtained with CS+LLP (0.407 mm), while dual CS (0.459 mm) showed the highest amount of total displacement; the lowest amount of peak stresses was obtained with CS+LLP (5.38 MPa), while dual CS (8.749 MPa) showed the highest amount of total peak stresses. For a comminuted talar neck fracture, the lowest amount of displacement was obtained with CS+LLP (0.398 mm), while dual CS (0.408 mm) showed the highest amount of total displacement; the lowest amount of peak stresses was obtained with CS+LLP (129.9 MPa), while dual CS (205.9 MPa) showed the highest amount of peak stresses. CONCLUSION: Compared to the other two groups, the dual CS+LLP group had better biomechanics properties in the displacement and stress peak of the talus and implant. Thus, the use of dual CS+LLP fixation is recommended for the surgical treatment of comminuted talar neck fractures.

Understanding the Cathode-Electrolyte Interfacial Chemistry in Rechargeable Magnesium Batteries.

Rechargeable magnesium batteries (RMBs) have garnered significant attention due to their potential to provide high energy density, utilize earth-abundant raw materials, and employ metal anode safely. Currently, the lack of applicable cathode materials has become one of the bottleneck issues for fully exploiting the technological advantages of RMBs. Recent studies on Mg cathodes reveal divergent storage performance depending on the electrolyte formulation, posing interfacial issues as a previously overlooked challenge. This minireview begins with an introduction of representative cathode-electrolyte interfacial phenomena in RMBs, elaborating on the unique solvation behavior of Mg2+, which lays the foundation for interfacial chemistries. It is followed by presenting recently developed strategies targeting the promotion of Mg2+ desolvation in the electrolyte and alternative cointercalation approaches to circumvent the desolvation step. In addition, efforts to enhance the cathode-electrolyte compatibility via electrolyte development and interfacial engineering are highlighted. Based on the abovementioned discussions, this minireview finally puts forward perspectives and challenges on the establishment of a stable interface and fast interfacial chemistry for RMBs.

Covalently Cross-Linked Chemistry of a Three-Dimensional Network Binder at Limited Dosage Enables Practical Si/C Composite Electrode Applications.

Currently, Si (or SiOx, 1 < x < 2) and graphite composite (Si/C) electrodes (e.g., Si/C450 and Si/C600 with specific capacities of 450 and 600 mAh g-1 at 0.1 C, respectively) have become the most promising alternative to traditional graphite anodes toward high-energy lithium-ion battery (LIB) applications by virtue of their higher specific capacity compared to graphite ones and improved cycle performance compared to Si (or SiOx) ones. However, such composite electrodes remain challenging to practical for implementation owing to electrode structure disintegration and interfacial instability caused by a large volume change of inner Si-based particles. Herein, we develop a covalent-bond cross-linking network binder for Si/C450 and Si/C600 electrodes via reversible addition-fragmentation chain transfer (RAFT) polymerization. The as-developed binder with a 3 mol % cross-linker of other monomers [termed P(SH-BA3%)] achieves improved mechanical and adhesive properties and decreased Si/C anode volume expansion, compared to the linear binder counterpart. Impressively, the P(SH-BA3%) binder at only 3 wt % dosage enables 83.56% capacity retention after 600 cycles at 0.5 C in Si/C450 anode based half-cells and retains 86.42% capacity retention at 0.3 C after 200 cycles and 80.95% capacity retention at 0.5 C after 300 cycles in LiNi0.8Co0.1Mn0.1O2 cathode (15 mg cm-2) based homemade soft package full cells. This work provides insight into binder cross-linking chemistry under limited dosage and enlightens cross-linking binder design toward practical Si/C electrode applications.

Deep Q networks-based optimization of emergency resource scheduling for urban public health events.

In today's severe situation of the global new crown virus raging, there are still efficiency problems in emergency resource scheduling, and there are still deficiencies in rescue standards. For the happiness and well-being of people's lives, adhering to the principle of a community with a shared future for mankind, the emergency resource scheduling system for urban public health emergencies needs to be improved and perfected. This paper mainly studies the optimization model of urban emergency resource scheduling, which uses the deep reinforcement learning algorithm to build the emergency resource distribution system framework, and uses the Deep Q Network path planning algorithm to optimize the system, to achieve the purpose of optimizing and upgrading the efficient scheduling of emergency resources in the city. Finally, through simulation experiments, it is concluded that the deep learning algorithm studied is helpful to the emergency resource scheduling optimization system. However, with the gradual development of deep learning, some of its disadvantages are becoming increasingly obvious. An obvious flaw is that building a deep learning-based model generally requires a lot of CPU computing resources, making the cost too high.

A smartphone-based ratiometric fluoroprobe based on blue-red dual-emission signals of thiochrome and copper nanoclusters for sensitive assay of metam-sodium in cucumbers.

It is of great importance to develop the highly efficient fluorescence strategy for rapid/sensitive detection of metam-sodium (MES) in evaluating its residual safety, especially in fresh vegetables. Herein, we prepared an organic fluorophore (thiochrome, TC) and glutathione-capped copper nanoclusters (GSH-CuNCs), and their combination (TC/GSH-CuNCs) was sucessfully employed as a ratiometric fluoroprobe by means of the blue-red dual emission. The fluorescence intensities (FIs) of TC decreased upon the addition of GSH-CuNCs via the fluorescence resonance energy transfer (FRET) process. When fortified at the constant levels of GSH-CuNCs and TC, MES substantially reduced the FIs of GSH-CuNCs, while this was not the case in the FIs of TC except for the prominent red-shift of ∼30 nm. Compared to the previous fluoroprobes, the TC/GSH-CuNCs based fluoroprobe supplied wider linear range of 0.2-500 µM, lower detection limit (60 nM), and satisfactory fortification recoveries (80-107%) for MES in the cucumber samples. Based on the fluorescence quenching phenomenon, a smartphone application was used to output RGB values of the captured images for the colored solution. The smartphone-based ratiometric sensor could be utilized for the visual fluorescent quantitation of MES by virtue of the R/B values in cucumbers, which gave linear range (1-200 µM) and LOD (0.3 µM). By means of blue-red dual-emission fluorescence, the smartphone-based fluoroprobe provides a cost-effective, portable and reliable avenue for the on-site, rapid and sensitive assay of MES's residues in complex vegetable samples.

Aqueous MXene inks for inkjet-printing microsupercapacitors with ultrahigh energy densities.

Although inkjet-printing technology has achieved significant development in preparing scalable and adaptable energy storage devices for portable and micro devices, searching for additive-free and environmentally friendly aqueous inks is a significant challenge. Hence, an aqueous MXene/sodium alginate-Fe2+ hybrid ink (denoted as MXene/SA-Fe) with solution processability and suitable viscosity is prepared for direct inkjet printing microsupercapacitors (MSCs). The SA molecules are adsorbed on the surface of MXene nanosheets to construct three-dimensional (3D) structures, thus effectively alleviating the two notorious problems of oxidation and self-restacking of MXene. Concurrently, Fe2+ ions can compress the ineffective macropore volume and make the 3D structure more compact. Moreover, the hydrogen and covalent bonding formed between the MXene nanosheet, SA, and Fe2+ effectively protects the oxidation of MXene and thus increases its stability. Thus, the MXene/SA-Fe ink endows the inkjet-printed MSC electrode with abundant active sites for ion storage and a highly conductive network for electron transfer. As a demonstration, the MXene/SA-Fe ink is used to direct inkjet-printed MSCs with an electrode spacing of 310 µm, which exhibit remarkable capacitances of 123.8 mF cm-2 (@5 mV s-1), good rate capability, an extraordinary energy density of 8.44 µWh cm-2 at a power density of 33.70 µW cm-2, long-term cycling stability of 91.4 % capacitance retention after 10,000 cycles, and surprising mechanical durability with 90.0 % of its initial capacitance retained after 10,000 bending cycles. Therefore, MXene/SA-Fe inks are expected to create various opportunities for printable electronics.