Anti-aging effects of dietary phytochemicals: From Caenorhabditis elegans, Drosophila melanogaster, rodents to clinical studies.

Anti-aging research has become critical since the elderly population is increasing dramatically in this era. With the establishment of frailty phenotype and frailty index, the importance of anti-frailty research is concurrently enlightened. The application of natural phytochemicals against aging or frailty is always intriguing, and abundant related studies have been published. Various models are designed for biological research, and each model has its strength and weakness in deciphering the complex aging mechanisms. In this article, we attempt to show the potential of Caenorhabditis elegans in the study of phytochemicals' effects on anti-aging by comparing it to other animal models. In this review, the lifespan extension and anti-aging effects are demonstrated by various physical, cellular, or molecular biomarkers of dietary phytochemicals, including resveratrol, curcumin, urolithin A, sesamin, fisetin, quercetin, epigallocatechin-3-gallate, epicatechin, spermidine, sulforaphane, along with extracts of broccoli, cocoa, and blueberry. Meanwhile, the frequency of phytochemicals and models studied or presented in publications since 2010 were analyzed, and the most commonly mentioned animal models were rats, mice, and the nematode C. elegans. This up-to-date summary of the anti-aging effect of certain phytochemicals has demonstrated powerful potential for anti-aging or anti-frailty in the human population.

Synthesis and characterization of stabilized oxygen-releasing CaO2 nanoparticles for bioremediation.

Bioremediation is one of the general methods to treat pollutants in soil, sediment, and groundwater. However, the low concentration and restricted dispersion of dissolved oxygen (DO) in these areas have limited the efficiency of remediation especially for microorganisms that require oxygen to grow. Calcium peroxide (CaO2) is one of the oxygen-releasing compounds and has been applied to magnify the remediation efficacy of polluting areas. In this study, CaO2 nanoparticles (NPs) were synthesized and evaluated by wet chemistry methods as well as dry and wet grinding processes. The characteristics of CaO2 particles and NPs were analyzed and compared by dynamic light scattering, transmission electron microscopy, scanning electron microscopy, and X-ray powder diffraction. Our results showed that wet-grinded CaO2 NPs had an average particle size of around 110 nm and were more stable compared to other particles from aggregation and sedimentation tests. In addition, we also observed that CaO2 NPs had better DO characteristics and patterns; these NPs generated higher DO levels than their non-grinded form. Accordingly, our results suggested that wet-grinding CaO2 particles to nanoscale could benefit their usage in bioremediation.

Engineering pH-sensitive erodible chitosan hydrogel composite containing bacteriophage: An interplay between hydrogel and bacteriophage against Staphylococcus aureus.

Encapsulation of phages represents a key approach for improving phage stability and controlling phage delivery dosage. The hydrogel made from positively charged quaternized chitosan (QCS) and multivalent crosslinker, aldehyde-modified poly(xylitol sebacate)-co-poly(ethylene glycol) (APP) was introduced for the first time for drug (phage 44AHJD) delivery. The freeze-thawing (FT) treatment enhanced the porous structure and the stress resistance of native hydrogel with increased compression stress (stiffness) from 10 to 20 kPa. The stiffness of the phage-loaded hydrogel (FTP) was suitable for the proper release of phage particles and polymer chains, both working synergistically against bacterial growth. The FTP followed the Korsmeyer-Peppas model's anomalous diffusion of phage particles at different temperatures (30-45 °C) and pH (6.6-8.5) conditions. FTP was sensitive to pH, which released more phage particles at pH-neutral conditions, while the release under acidic and alkaline conditions was more based on gel degradation. The high biocompatibility of FTP hydrogel at its working concentration of 30 mg mL-1 was demonstrated through a hemolysis ratio of <2 %. Sixty percent of the total encapsulated phages and 6 mg mL-1 of hydrogel debris were released after 10 h of hydrogel submerge treatment, which can fight the growing bacteria and the emergence of phage-resistant bacteria.

Ultrasonic interfacial crosslinking of TiO2-based nanocomposite hydrogels through thiol-norbornene reactions for sonodynamic antibacterial treatment.

Nanocomposite (NC) hydrogels used for sonodynamic therapy (SDT) face challenges such as lacking interfacial interactions between the polymers and nanomaterials as well as presenting uneven dispersion of nanomaterials in the hydrogel network, reducing their mechanical properties and treatment efficiency. Here, we demonstrate a promising approach of co-engineering nanomaterials and interfacial crosslinking to expand the materials construction and biomedical applications of NC hydrogels in SDT. In this work, mesoporous silica-coated titanium dioxide nanoparticles with thiolated surface functionalization (TiO2@MS-SH) are utilized as crosslinkers to react with norbornene-functionalized dextran (Nor-Dex) through ultrasound-triggered thiol-norbornene reactions, forming TiO2@MS-SH/Nor-Dex NC hydrogels. The TiO2@MS-SH nanoparticles act not only as multivalent crosslinkers to improve the mechanical properties of hydrogels under ultrasound irradiation but also as reactive oxygen species (ROS) generators to allow the use of TiO2@MS-SH/Nor-Dex NC hydrogels in SDT applications. Particularly, the TiO2@MS-SH/Nor-Dex NC hydrogels present tailorable microstructures, properties, and sonodynamic killing of bacteria through the modulation of the ultrasound frequency. Taken together, a versatile TiO2-based NC hydrogel platform prepared under ultrasonic interfacial crosslinking reactions is developed for advancing the applications in SDT.

Fabrication of versatile poly(xylitol sebacate)-co-poly(ethylene glycol) hydrogels through multifunctional crosslinkers and dynamic bonds for wound healing.

Poly(polyol sebacate) (PPS) polymer family has been recognized as promising biomaterials for biomedical applications with their characteristics of easy production, elasticity, biodegradation, and cytocompatibility. Poly(xylitol sebacate)-co-poly(ethylene glycol) (PXS-co-PEG) has been developed to fabricate PPS-based hydrogels; however, current PXS-co-PEG hydrogels presented limited properties and functions due to the limitations of the crosslinkers and crosslinking chemistry used in the hydrogel formation. Here, we fabricate a new type of PXS-co-PEG hydrogels through the use of multifunctional crosslinkers as well as dynamic bonds. In our design, polyethyleneimine-polydopamine (PEI-PDA) macromers are utilized to crosslink aldehyde-functionalized PXS-co-PEG (APP) through imine bonds and hydrogen bonds. PEI-PDA/APP hydrogels present multiple functional properties (e.g., fluorescent, elastomeric, biodegradable, self-healing, bioadhesive, antioxidant, and antibacterial behaviors). These properties of PEI-PDA/APP hydrogels can be fine-tuned by changing the PDA grafting degrees in the PEI-PDA crosslinkers. Most importantly, PEI-PDA/APP hydrogels are considered promising wound dressings to promote tissue remodeling and prevent bacterial infection in vivo. Taken together, PEI-PDA/APP hydrogels have been demonstrated as versatile biomaterials to provide multiple tailorable properties and desirable functions to expand the utility of PPS-based hydrogels for advanced biomedical applications. STATEMENT OF SIGNIFICANCE: Various strategies have been developed to fabricate poly(polyol sebacate) (PPS)-based hydrogels. However, current PPS-based hydrogels present limited properties and functions due to the limitations of the crosslinkers and crosslinking chemistry used in the hydrogel formation. This work describes that co-engineering crosslinkers and interfacial crosslinking is a promising approach to synthesizing a new type of poly(xylitol sebacate)-co-poly(ethylene glycol) (PXS-co-PEG) hydrogels as multifunctional hydrogels to expand the utility of PPS-based hydrogels for advanced biomedical applications. The fabricated hydrogels present multiple functional properties (e.g., fluorescent, biodegradable, elastomeric, self-healing, bioadhesive, antioxidative, and antibacterial), and these properties can be fine-tuned by the defined crosslinkers. The fabricated hydrogels are also used as promising wound dressing biomaterials to exhibit promoted tissue remodeling and prevent bacterial infection in vivo.

Modification of polyacrylonitrile-derived carbon nanofibers and bacteriophages on screen-printed electrodes: A portable electrochemical biosensor for rapid detection of Escherichia coli.

A facile method was developed for fabricating a disposable phage-based electrochemical biosensor for the detection of Escherichia coli. Bare screen-printed electrodes (SPEs) were modified using a two-step drop-casting method, in which polyacrylonitrile-derived electrospun carbon nanofibers (CNFs) were deposited, followed by E. coli bacteriophage immobilization. The deposition of CNFs increased the surface area for bacteriophage immobilization while maintaining a conductive link for ferro/ferricyanide redox transitions. Cyclic voltammetry and electrochemical impedance spectroscopy confirmed that the CNF modification increased the electron-transfer rate, whereas bacteriophages and E. coli blocked electron transfer at the electrode. The biosensor achieved a response within 10 min and a linear response in the E. coli concentration range of 102-106 CFU/mL. A limit of detection (LOD) of 36 CFU/mL in phosphate-buffered saline was achieved, which is the lowest LOD reported thus far for phage-based disposable SPE sensors. The biosensor exhibited recovery rates between 106 % and 119 % for E. coli detection in apple juice. The proposed fabrication method allowed electrodes to be obtained from different production batches with remarkable consistency and reproducibility, and they remained stable at room temperature for one month. Thus, a phage-based disposable SPE that can be used for bacterial detection was developed for the first time.

Dual Dynamic Covalently Crosslinked Alginate Hydrogels with Tunable Properties and Multiple Stimuli-Responsiveness.

Alginate is a biopolymer that can be crosslinked with calcium ions to fabricate cytocompatible hydrogels. However, using calcium ions to crosslink alginate provides limited properties and functions to alginate hydrogels, restricting their biomedical applications. Here, phenylboronic acid-functionalized polyethyleneimine (PBA-PEI) was developed to introduce two orthogonal dynamic covalent crosslinks in the alginate hydrogels, where PBA-PEI was used to crosslink alginate dialdehyde (ADA) through imine bonds and boronate ester bonds. The grafting degree of PBA in the PEI structure was applied to fine-tune the properties of PBA-PEI/ADA hydrogels, including the rheological property, mechanical strength, swelling behavior, and antibacterial activity. In particular, the highly sensitive boronate ester bonds in the network enabled PBA-PEI/ADA hydrogels to be responsive to several stimuli, such as glucose, fructose, and hydrogen peroxide. Taken together, PBA-PEI/ADA hydrogels with tunable properties and multiple stimuli-responsiveness have been demonstrated as smart biomaterials for advanced biomedical applications.

Development of a PCL-PEO double network colorimetric pH sensor using electrospun fibers containing Hibiscus rosa sinensis extract and silver nanoparticles for food monitoring.

Major anthocyanin, cyanidin-3-sophoroside (318.1 mg/mL), and other minor copigments were identified in the ethanol extract of Hibiscus rosa sinensis. The extracts can be coelectrospun with polycaprolactone and polyethylene oxide into fiber mats and were sensitive to pH changes from 1 to 13 with a unique color code (ΔE > 5). The pH sensor was used to monitor shrimp quality under isothermal conditions to obtain the respective activation energy (Ea in kJ/mol) of the sensors' color-change response (20.2), measured pH (20.6), and trimethylamine nitrogen (24.6), indole (27.1), and total microbial counts (30.8). Together with the Pearson correlation coefficient, the results showed high correlations between the sensors' color change and other quality parameters (p < 0.001). The regression equation developed by conducting the kinetic analysis was also suitable for predicting shrimp quality at refrigeration temperatures (4-10 °C) and can be used as a marker to monitor shrimp quality by visually inspecting the item condition.

In situ formation of nanocomposite double-network hydrogels with shear-thinning and self-healing properties.

Nanocomposite double-network hydrogels (ncDN hydrogels) are recently introduced to address the limitations of traditional DN hydrogels, such as the lack of diversity in the network structure and the restricted functionalities. However, two challenges remain, including the time-consuming preparation and the lack of shear-thinning and self-healing properties. Here, our approach to developing versatile ncDN hydrogels is through the use of multiple interfacial crosslinking chemistries (i.e., noncovalent interactions of electrostatic interaction and hydrogen bonds as well as dynamic covalent interactions of imine bonds and boronate ester bonds) and surface functionalized nanomaterials (i.e. phenylboronic acid modified reduced graphene oxide (PBA-rGO)). PBA-rGO was used as a multivalent gelator to further crosslink the two polymer chains (i.e. triethylene glycol-grafted chitosan (TEG-CS) and polydextran aldehyde (PDA)) in DN hydrogels, forming the TEG-CS/PDA/PBA-rGO ncDN hydrogels in seconds. The microstructures (i.e. pore size) and properties (i.e. rheological, mechanical, and swelling properties) of the ncDN hydrogels can be simply modulated by changing the amount of PBA-rGO. The dynamic bonds in the polymeric network provided the shear-thinning and self-healing properties to the ncDN hydrogels, allowing the hydrogels to be injected and molded into varied shapes as well as self-repair the damaged structure. Besides, the designed TEG-CS/PDA/PBA-rGO ncDN hydrogels were cytocompatible and also exhibited antibacterial activity. Taken together, we hereby provide a nanomaterial approach to fabricate a new class of ncDN hydrogels with tailorable networks and favorite properties for specific applications.

Encapsulation of ß-Glucosidase within PVA Fibers by CCD-RSM-Guided Coelectrospinning: A Novel Approach for Specific Mogroside Sweetener Production.

Siamenoside I is a rare mogroside in Siraitia grosvenorii Swingle and has become one of the target ingredients in natural sweetener production. However, the complex structure of siamenoside I has hindered its production in various ways. Here, a yeast cell that produces a specific ß-glucosidase for siamenoside I conversion from mogroside V was constructed, and the enzymes were coelectrospun with poly(vinyl alcohol) followed by phenylboronic acid cross-linking to provide potential usage in the batch production process of Siamenoside I. A central composite design (CCD)-response surface methodology (RSM) was used to find the optimum coelectrospinning parameters. The pH stability and sodium dodecyl sulfate tolerance increased for the entrapped enzymes, and positive correlations between the fiber diameter and enzymatic activity were confirmed. The batch process showed an average siamenoside I production rate of 118 ± 0.08 mg L-1 h-1 per gram of fiber. This is the first research article showing specific siamenoside I production on enzyme-loaded electrospun fibers.

Biodegradation of hexabromocyclododecane by Rhodopseudomonas palustris YSC3 strain: A free-living nitrogen-fixing bacterium isolated in Taiwan.

The persistent organic pollutant, brominated flame retardant, hexabromocyclododecane (HBCD), identified as an emerging contaminant has been detected in various environmental matrix. The increased level of this toxic organic compound in the environment has been associated with serious human health risks. The results obtained from this study revealed that various Rhodopseudomonas palustris strains isolated from paddy soil in Taiwan possessed good HBCD biodegradation capability when they were cultured aerobically. Among these strains, YSC3 was considered as one of the most potential isolates for HBCD degradation. The optimum HBCD biodegradation occurred at neutral pH and at 35 °C in all our pH and temperature tests at an initial HBCD concentration of 1 ppm. HBCD degradation kinetics generally decreased with the increase of initial HBCD concentration. The study also suggested that the cultivation temperature played a vital role on YSC3 for its initiation of cellular HBCD degradation. The relative-molar ratio of the released bromide ions during the biodegradation of HBCD was observed in the range between 1 and 3.5, suggesting that the debromination reactions occurred. Concomitant with the loss of HBCD, there was a concurrent production of two metabolites, pentabromocyclododecanol and pentabromocyclododecene, which were determined by liquid chromatography and mass spectrometry techniques. On the basis of the obtained results, the possible biodegradation pathways were also proposed in this study.

Biotransformation of mogrosides from Siraitia grosvenorii by Ganoderma lucidum mycelium and the purification of mogroside III E by macroporous resins.

Mogrosides are the major triterpenoidal saponins found in swingle, the fruit of Siraitia grosvenorii, which have recently been widely used throughout the world as natural food sweeteners. Among this class of compounds, mogroside III E (MG III E) exhibits the most intense sweetness, and it was also found to effectively regulate blood glucose levels. However, the relative abundance of naturally occurring MG III E is low compared to other mogrosides. Therefore, the purpose of this study was to enrich MG III E through biotransformation of fruit extracts and to develop a reliable method for its purification. We used HPLC coupled with mass spectrometry and nuclear magnetic resonance spectroscopy for metabolite analysis and identified MG III E as a major metabolite of Ganoderma lucidum mycelium. This organism converts the most abundant mogroside, mogroside V, to MG III E via a deglycosylation reaction; high levels of ß-glucosidase activities were also detected. In addition, we established an efficient purification method for MG III E using HP-20 macroporous resin. Optimization of the method was accomplished by kinetic model fitting, dynamic adsorption studies, and desorption experiments. The purity of MG III E was increased from 11.71% to 54.19%, with a 70%-76% recovery rate, and the scaled-up purification process allowed us to harvest 17.38 g of MG III E with 55.14% purity and a 74.71% of recovery rate. Therefore, our low cost, time-saving, easy to scale-up procedure for isolating MG III E could be applicable in industrial processes.

Dekkera bruxellensis, a beer yeast that specifically bioconverts mogroside extracts into the intense natural sweetener siamenoside I.

In response to growing concerns about the consumption of artificial sweeteners, the demand for natural sweeteners has recently increased. Mogroside V is a common natural sweetener extracted from the fruit of Siraitia grosvenorii, but its taste should be improved for marketability. Here, we screened various microbes for the ability to perform selective hydrolysis of glycosidic bonds in mogroside V, converting it to siamenoside I, which has a higher sweetening power and better taste than other mogrosides. Dekkera bruxellensis showed the most promising results in the screen, and the Exg1 gene (coding for a ß-glucosidase) of D. bruxellensis was cloned and purified. We then used HPLC-MS/MS to assess the ß-glucosidase activity of purified enzymes on p-nitrophenyl ß-glucoside and mogroside V. The results demonstrated that D. bruxellensis had a unique enzyme that can selectively hydrolyze mogrol glycosides and promote the conversion of the natural sweetener mogroside V to siamenoside I.

Using high-throughput transcriptome sequencing to investigate the biotransformation mechanism of hexabromocyclododecane with Rhodopseudomonas palustris in water.

We discovered one purple photosynthetic bacterium, Rhodopseudomonas palustris YSC3, which has a specific ability to degrade 1, 2, 5, 6, 9, 10-hexabromocyclododecane (HBCD). The whole transcriptome of R. palustris YSC3 was analyzed using the RNA-based sequencing technology in illumina and was compared as well as discussed through Multi-Omics onLine Analysis System (MOLAS, http://molas.iis.sinica.edu.tw/NTUIOBYSC3/) platform we built. By using genome based mapping approach, we can align the trimmed reads on the genome of R. palustris and estimate the expression profiling for each transcript. A total of 341 differentially expressed genes (DEGs) in HBCD-treated R. palustris (RPH) versus control R. palustris (RPC) was identified by 2-fold changes, among which 305 genes were up-regulated and 36 genes were down-regulated. The regulated genes were mapped to the database of Gene Ontology (GO) and Genes and Genomes Encyclopedia of Kyoto (KEGG), resulting in 78 pathways being identified. Among those DEGs which annotated to important functions in several metabolic pathways, including those involved in two-component system (13.6%), ribosome assembly (10.7%), glyoxylate and dicarboxylate metabolism (5.3%), fatty acid degradation (4.7%), drug metabolism-cytochrome P450 (2.3%), and chlorocyclohexane and chlorobenzene degradation (3.0%) were differentially expressed in RPH and RPC samples. We also identified one transcript annotated as dehalogenase and other genes involved in the HBCD biotransformation in R. palustris. Furthermore, the putative HBCD biotransformation mechanism in R. palustris was proposed.

Period doubling in period-one steady states.

Nonlinear classical dissipative systems present a rich phenomenology in their "route to chaos," including period doubling, i.e., the system evolves with a period which is twice that of the driving. However, typically the attractor of a periodically driven quantum open system evolves with a period which exactly matches that of the driving. Here, we analyze a periodically driven many-body open quantum system whose classical correspondent presents period doubling. We show that by studying the dynamical correlations, it is possible to show the occurrence of period doubling in the quantum (period-one) steady state. We also discuss that such systems are natural candidates for clean and intrinsically robust Floquet time crystals.

Characterization of an extracellular ß-glucosidase from Dekkera bruxellensis for resveratrol production.

Polygonum cuspidatum is a widely grown crop with a rich source of polydatin (also called piceid) for resveratrol production. Resveratrol is produced from piceid via enzymatic cleavage of the sugar moiety of piceid. In this study, Dekkera bruxellensis mutants were selected based on their high p-nitrophenyl-ß-d-glucopyranoside and piceid conversion activities. The enzyme responsible for piceid conversion was a heterodimeric protein complex that was predominantly secreted to the extracellular medium and consisted of two subunits at an equal ratio with molecular masses of 30.5 kDa and 48.3 kDa. The two subunits were identified as SCW4p and glucan-ß-glucosidase precursor in D. bruxellensis. Both proteins were individually expressed in Saccharomyces cerevisiae exg1Δ mutants, which lack extracellular ß-glucosidase activity, to confirm each protein's enzymatic activities. Only the glucan-ß-glucosidase precursor was shown to be a secretory protein with piceid deglycosylation activity. Our pilot experiments of piceid bioconversion demonstrate the possible industrial applications for this glucan-ß-glucosidase precursor in the future.

Linear free energy relationships for the adsorption of volatile organic compounds onto multiwalled carbon nanotubes at different relative humidities: comparison with organoclays and activated carbon.

Accurate prediction of the sorption coefficients of volatile organic compounds (VOCs) on carbon nanotubes (CNTs) is of major importance for developing an effective VOC removal process and risk assessment of released nanomaterial-carrying contaminants. The linear free energy relationship (LFER) approach was applied to investigate the adsorption mechanisms of VOCs on multiwalled CNTs (MWCNTs). The gas-solid partition coefficients (log Kd) of 17 VOCs were determined at 0%, 55%, and 90% relative humidity (RH). The cavity/dispersion interaction is generally the most influential adsorption mechanism for all RH cases. The hydrogen-accepting interactions declined but with constant hydrogen-donating interactions during the increase of RH, suggesting that the acidity of VOC was important in forming sorptive interaction with the MWCNT surface. Moreover, the comparison of log Kd of VOCs on MWCNTs and other sorbents revealed that the sorption performance of MWCNTs is much more stable over a wider range of RHs due to better site availability and site quality. Furthermore, for all 6 adsorbents in all RHs, the positive contribution of hydrogen bonding ability was found as compared to the negative one found for sorbents completely in water, indicating that the hydrogen-bond donor and acceptor on the sorbent surface contribute to the sorption in the gas phase. In conclusion, the LFER-derived coefficients can be useful in predicting the performance of VOC adsorption on adsorbents and in facilitating the design of efficient VOC removal systems.

Pilot scale repeated fed-batch fermentation processes of the wine yeast Dekkera bruxellensis for mass production of resveratrol from Polygonum cuspidatum.

Resveratrol has long been used as an ingredient in functional foods. Currently, Polygonum cuspidatum extract is the greatest natural source for resveratrol because of high concentrations of glycosidic-linked resveratrol. Thus, developing a cost-effective procedure to hydrolyze glucoside could substantially enhance resveratrol production from P. cuspidatum. This study selected Dekkera bruxellensis from several microorganisms based on its bioconversion and enzyme-specific activities. We demonstrated that the cells could be reused at least nine times while maintaining an average of 180.67U/L ß-glucosidase activity. The average resveratrol bioconversion efficiency within five rounds of repeated usage was 108.77±0.88%. This process worked effectively when the volume was increased to 1200L, a volume at which approximately 35mgL-1h-1 resveratrol per round was produced. This repeated fed-batch bioconversion process for resveratrol production is comparable to enzyme or cell immobilization strategies in terms of reusing cycles, but without incurring additional costs for immobilization.

Hyperproduction of ß-Glucanase Exg1 Promotes the Bioconversion of Mogrosides in Saccharomyces cerevisiae Mutants Defective in Mannoprotein Deposition.

Bacteria and fungi can secrete extracellular enzymes to convert macromolecules into smaller units. Hyperproduction of extracellular enzymes is often associated with alterations in cell wall structure in fungi. Recently, we identified that Saccharomyces cerevisiae kre6Δ mutants can efficiently convert mogroside V into mogroside III E, which has antidiabetic properties. However, the underlying efficient bioconversion mechanism is unclear. In the present study, the mogroside (MG) bioconversion properties of several cell wall structure defective mutants were analyzed. We also compared the cell walls of these mutants by transmission electron microscopy, a zymolyase sensitivity test, and a mannoprotein release assay. We found zymolyase-sensitive mutants (including kre1Δ, las21Δ, gas1Δ, and kre6Δ), with defects in mannoprotein deposition, exhibit efficient MG conversion and excessive leakage of Exg1; such defects were not observed in wild-type cells, or mutants with abnormal levels of glucans in the cell wall. Thus, yeast mutants defective in mannoprotein deposition may be employed to convert glycosylated bioactive compounds.

Biotransformation of mogrosides from Siraitia grosvenorii Swingle by Saccharomyces cerevisiae.

Mogrosides are a group of triterpenoidal saponins from the fruit of Siraitia grosvenorii Swingle; they are intensely sweet and have consequently been used as a substitute for sugar by the food industry. The lack of efficient methods to produce specific mogrosides has hindered investigation of the relationship between their structure and bioactivity, e.g., down-regulation of blood glucose levels, anti-inflammation, and antiviral infection. Here, we attempt to selectively convert the major saponin mogroside V, a mogrol pentaglucoside, into mogroside III E, a triglucoside, via the ß-glucosidases of the budding yeast Saccharomyces cerevisiae. We report that the ß-glucopyranosyl and ß-glucopyranosyl-(1→2)-ß-d-glucopyranosyl attached on C-3 and -24 of mogrol, respectively, were resistant to hydrolysis by yeast ß-d-glucosidases. We further screened 16 mutants bearing single defective glucanase or glucosidase genes, thereby demonstrating that Exg1 is a major enzyme of the initiation of mogroside V conversion. Deletion of the KRE6 gene unexpectedly facilitated the production of mogroside III E in yeast culture. This paper demonstrates that yeast knockout mutants are a valuable tool for saponin modification and for studying the specificity of glucosidase function.