Glutathionylation of a glycolytic enzyme promotes cell death and vigor loss during aging of elm seeds.

Seed deterioration during storage is a major problem in agricultural and forestry production and for germplasm conservation. Our previous studies have shown that a mitochondrial outer membrane protein VOLTAGE-DEPENDENT ANION CHANNEL (VDAC) is involved in programmed cell death-like viability loss during the controlled deterioration treatment (CDT) of elm (Ulmus pumila L.) seeds, but its underlying mechanism remains unclear. In this study, we demonstrate that the oxidative modification of GLYCERALDEHYDE-3-PHOSPHATE DEHYDROGENASE (GAPDH) is functioned in the gate regulation of VDAC during the CDT of elm seeds. Through biochemical and cytological methods and observations of transgenic material [Arabidopsis (Arabidopsis thaliana), Nicotiana benthamiana, and yeast (Saccharomyces cerevisiae)], we demonstrate that cysteine S-glutathionylated UpGAPDH1 interacts with UpVDAC3 during seed aging, which leads to a mitochondrial permeability transition and aggravation of cell death, as indicated by the leakage of the mitochondrial proapoptotic factor cytochrome c and the emergence of apoptotic nucleus. Physiological assays and inductively coupled plasma mass spectrometry analysis revealed that GAPDH glutathionylation is mediated by increased glutathione, which might be caused by increases in the concentrations of free metals, especially Zn. Introduction of the Zn-specific chelator TPEN [(N,N,N',N'-Tetrakis (2-pyridylmethyl)ethylenediamine)] significantly delayed seed aging. We conclude that glutathionylated UpGAPDH1 interacts with UpVDAC3 and serves as a proapoptotic protein for VDAC-gating regulation and cell death initiation during seed aging.

Impact of ectopic fat on brain structure and cognitive function: A systematic review and meta-analysis from observational studies.

Ectopic fat, defined as a specific organ or compartment with the accumulation of fat tissue surrounding organs, is highly associated with obesity which has been identified as a risk factor for cognitive impairment and dementia. However, the relationship between ectopic fat and changes in brain structure or cognition is yet to be elucidated. Here, we investigated the effects of ectopic fat on brain structure and cognitive function via systemic review and meta-analysis. A total of 21 studies were included from electronic databases up to July 9, 2022. We found ectopic fat was associated with decreased total brain volumeand increased lateral ventricle volume. In addition, ectopic was associated with decreased cognitive scores and negatively correlated with cognitive function. More specifically, dementia development were correlated with increased levels of visceral fat. Overall, our data suggested that increased ectopic fat was associated with prominent structural changes in the brain and cognitive decline, an effect driven mainly by increases in visceral fat, while subcutaneous fat may be protective. Our results suggest that patients with increased visceral fat are at risk of developing cognitive impairment and, therefore, represent a subset of population in whom appropriate and timely preventive measures could be implemented.

Zwitterion Dual-Modification Strategy for High-Quality NiOx and Perovskite Films for Solar Cells.

Nickel oxide (NiOx) has been limited in use as a hole transport layer for its low conduction, surface defects, and redox reactions with the perovskite layer. To address these issues, the incorporation of zwitterion L-tryptophan (Trp) is proposed at the NiOx/Trp interface. The carboxyl group of Trp effectively passivates the surface positive defects of NiOx, thereby improving its optical and electrical properties. The ammonium group of Trp not only passivates negative defects but modulates the growth of the perovskite layer, resulting in an improved perovskite film quality. Furthermore, the Trp layer acts as a buffer layer, suppressing adverse interfacial reactions between the perovskite and NiOx. Consequently, perovskite solar cells with 1.56 and 1.68 eV absorbers achieve the champion power conversion efficiency (PCE) of 23.79% and 20.41%, respectively. Moreover, the unencapsulated devices demonstrate excellent long-term stability, retaining above 80% of the initial PCE value after 1600 h of storage in the air with a humidity of 50-60%.

Aptamer-Functionalized Magnetic Ti3C2 Based Nanoplatform for Simultaneous Enrichment and Detection of Exosomes.

Exosomes are nanovesicles secreted by cells, which play a crucial role in various pathological processes. Exosomes have shown great promise as tumor biomarkers because of the abundant secretion during tumor formation. The development of a convenient, efficient, and cost-effective method for simultaneously enriching and detecting exosomes is of utmost importance for both basic research and clinical applications. In this study, an aptamer-functionalized magnetic Ti3C2 composite material (Fe3O4@Ti3C2@PEI@DSP@aptamer@FAM-ssDNA) is prepared for the simultaneous enrichment and detection of exosomes. CD63 aptamers are utilized to recognize and capture the exosomes, followed by magnetic separation. The exosomes are then released by cleaving the disulfide bonds of DSP. Compared to traditional methods, Fe3O4@Ti3C2@PEI@DSP@aptamer@FAM-ssDNA exhibited superior efficiency in enriching exosomes while preserving their structural and functional integrity. Detection of exosome concentration is achieved through the fluorescence quenching of Ti3C2 and the competitive binding between the exosomes and a fluorescently labeled probe. This method exhibited a low detection limit of 4.21 × 104 particles mL-1, a number that is comparable to the state-of-the-art method in the detection of exosomes. The present study demonstrates a method of simultaneous enrichment and detection of exosomes with a high sensitivity, accuracy, specificity, and cost-effectiveness providing significant potential for clinical research and diagnosis.

Perovskite Solar Cells Based on Polymerized Chlorophyll Films as Environmentally Friendly Hole-Transporting Layers.

Hole-transporting layers (HTLs) play a crucial role in the performance of inverted, p-i-n perovskite solar cells (PSCs). Chlorophylls (Chls) are naturally abundant organic photoconductors on earth, with good charge carrier mobility and appropriate Fermi energy levels that make them promising candidates for use in photovoltaic devices. However, Chls films prepared using the solution method exhibit lower carrier mobility compared to other organic polymer films, which limits their application in PSCs. To address this issue, Chls molecules are chemically linked to reduce the charge transfer barrier, thus the transfer of charges between molecules is transformed to intramolecular charge transfer. This study synthesizes and characterizes two polymerized Chl films, PolyCuChl and PolyNiChl, as HTLs of CH3 NH3 PbI3 -based PSCs. PSCs based on the electrochemical polymerization of PolyChl HTLs demonstrate an enhanced power conversion efficiency (PCE) of up to 19.0%, which is the highest efficiency among devices based on Chl materials. Furthermore, these devices demonstrated exceptional long-term stability. These results highlight the potential of polymerized Chl films as a viable alternative to conventional HTLs in PSCs. The approach utilizes abundant, environmentally friendly, and versatile Chl derivatives, and can be extended to develop next-generation HTL materials for improved PSC performance.

Oxide Derivatives of Nb2CTx MXene and Their Application as Electron Transport Layers in Perovskite Solar Cells: Unraveling the Oxidation Process and Functionalization.

In the realm of photovoltaic research, 2D transition metal carbides (MXenes) have gained significant interest due to their exceptional photoelectric capabilities. However, the instability of MXenes due to oxidation has a direct impact on their practical applications. In this work, the oxidation process of Nb2CTx MXene in aqueous systems is methodically simulated at the atomic level and nanosecond timescales, which elucidates the structural variations influenced by the synergistic effects of water and dissolved oxygen, predicting a transition from metal to semiconductor with 44% C atoms replaced by O atoms in Nb2CTx. Moreover, Nb2CTx with varying oxidation degrees is utilized as electron transport layers (ETLs) in perovskite solar cells (PSCs). Favorable energy level alignments with superior electron transfer capability are achieved by controlled oxidation. By further exploring the composites of Nb2CTx to its derivatives, the strong interaction of the nano-composites is demonstrated to be more effective for electron transport, thus the corresponding PSC achieves a better performance with long-term stability compared with the widely used ETLs like SnO2. This work unravels the oxidation dynamics of Nb2CTx and provides a promising approach to designing ETL by exploiting MXenes to their derivatives for photovoltaic technologies.

Preferred Orientation Deposition via Multifunctional Gel Electrolyte with Molecular Anchor Enabling Highly Reversible Zn Anode.

The high activity of water molecules results in a series of awful parasitic reaction, which seriously impede the development of aqueous zinc batteries. Herein, a new gel electrolyte with multiple molecular anchors is designed by employing natural biomaterials from chitosan and chlorophyll derivative. The gel electrolyte firmly anchors water molecules by ternary hydrogen bonding to reduce the activity of water molecules and inhibit hydrogen evolution reaction. Meanwhile, the multipolar charged functional groups realize the gradient induction and redistribution of Zn2+ , which drives oriented Zn (002) plane deposition of Zn2+ and then achieves uniform Zn deposition and dendrite-free anode. As a result, it endows the Zn||Zn cell with over 1700 h stripping/plating processes and a high efficiency of 99.4% for the Zn||Cu cell. In addition, the Zn||V2 O5 full cells also exhibit capacity retention of 81.7% after 600 cycles at 0.5 A g-1 and excellent long-term stability over 1600 cycles at 2 A g-1 , and the flexible pouch cells can provide stable power for light-emitting diodes even after repeated bending. The gel electrolyte strategy provides a reference for reversible zinc anode and flexible wearable devices.

Association between Perceived Stress and Motoric Cognitive Risk Syndrome in an Elderly Population: Rugao Longevity and Aging Study.

INTRODUCTION: Previous studies have indicated a correlation between perceived stress and cognitive decline. However, it remains unknown whether high levels of perceived stress can result in motoric cognitive risk (MCR) syndrome. This study investigated the relationship between perceived stress and MCR in a community-based population. METHODS: The study cohort comprised 852 elderly individuals from the Rugao Longitudinal Aging Cohort. Perceived stress was assessed using the 10-item Perceived Stress Scale (PSS-10), while MCR was defined as the coexistence of subjective memory complaints (SMCs) and slow gait speed. RESULTS: The average age of the study participants is 79.84 ± 4.34 years. The mean score of PSS-10 among participants is 10.32 (range = 0-33; [SD] = 5.71), with a median score of 10.00 (6.00, 14.00). The prevalence of MCR is 9.3%. In the logistic regression analysis, for each 1-SD (5.71) increase in the global PSS-10 score, the risk of MCR increased by 40% (95% CI 1.09-1.80). Additionally, in the aspect of two components of MCR, with a 1-SD increase (5.71) in the global PSS-10 score, there was a 50% (95% CI 1.29-1.75) increase in the risk of SMCs and a 27% (95% CI 1.04-1.55) increase in the risk of slow gait speed. In terms of specific walking speed, there was a reverse correlation between the global PSS-10 score and walking speed (r = -0.14, p < 0.001). CONCLUSIONS: This study provided preliminary evidence that high levels of perceived stress were associated with the risk of MCR in a community-dwelling population.

Engineering a Ce Promoter into a Three-Dimensional Porous Mo2C@NC Heterostructure for Hydrogen Evolution Electrocatalysis via Weakening the Mo-H Bond Strength.

The pursuit of highly efficient electrocatalysts for the alkaline hydrogen evolution reaction (HER) is of paramount importance for water splitting. However, it is still a formidable task in Mo2C-based materials because of the agglomeration and strong Mo-H binding of Mo2C units. Herein, a novel CeOCl-CeO2/Mo2C heterostructure nesting within a three-dimensional porous nitrogen-doped carbon matrix has been designed and used for catalyzing HER via simultaneous morphology and heterointerface engineering. As expected, the optimal CeOCl-CeO2(0.2)/Mo2C@3DNC exhibits impressive HER activity, with a low overpotential of 156 mV at a current density of 10 mA cm-2 coupled with a slight Tafel slope of 62.20 mV dec-1. Introducing a Ce promoter, that is CeOCl and CeO2, would endow the interface with an internal electric field and electron redistribution between CeOCl-CeO2 and Mo2C induced by the heterogeneous work function difference. Moreover, experimental investigation and density functional calculations confirm that the CeOCl-CeO2/Mo2C heterointerface can downshift the d-band center of the active Mo center, weakening the strength of the Mo-H coupling. This proposed concept, engineering Ce-based promoters into active entities involved in the heterostructure to modulate intermediate adsorption, offers a great opportunity for the design of superior electrocatalysts for energy conversion.

Evaluation of the efficacy of polyethylene glycol in combination with different doses of linaclotide in a fractionated bowel preparation for colonoscopy: a prospective randomized controlled study.

BACKGROUND AND AIM: The ideal bowel cleansing program still needs to be explored. The aim was to compare the bowel cleansing effect and patient tolerance of low-dose polyethylene glycol (PEG) combined with different doses of linaclotide in fractionated bowel preparation. METHODS: The subjects were randomly assigned to the 3LPEG group, 2LPEG + 2L group, or 2LPEG + L group. The primary outcome was to use the Ottawa Bowel Preparation Scale (OBPS) to evaluate the efficacy of bowel cleansing, and the secondary outcomes were the detection rate of adenomas and polyps, adverse reactions, tolerance, and defecation dynamics; subsets of patients with chronic constipation and irritable bowel syndrome were also analyzed. RESULTS: A total of 753 patients were randomly assigned. In ITT analysis, the success of preparation of the 2LPEG + 2L group was better than that of the 2LPEG + L group or the 3LPEG group (92.0% vs. 82.3% vs. 82.1%; P = 0.002). Compared with the 3LPEG group, the 2LPEG + L group showed similar but non-inferior results (82.3% vs. 82.1%, P > 0.05). The 2LPEG + 2L group was similar to the 2LPEG + L group in terms of adverse reaction, tolerance, willingness to reuse, and sleep quality, but both were superior to the 3LPEG group. In a subgroup analysis of chronic constipation, the 2LPEG + 2L group had the best cleansing effect on the right colon and mid colon, while in the subgroup analysis of irritable bowel syndrome, the tolerance was better in the 2LPEG + 2L group and the 2LPEG + L group than the 3LPEG group. CONCLUSIONS: 2LPEG + 2L is a feasible bowel preparation regimen.

Remodeling Zinc Deposition via Multisite Zincophilic Chlorophyll for Powerful Aprotic Zinc Batteries.

The organic electrolyte can resolve the hurdle of hydrogen evolution in aqueous electrolytes but suffers from sluggish electrochemical reaction kinetics due to a compromised mass transfer process. Herein, we introduce a chlorophyll, zinc methyl 3-devinyl-3-hydroxymethyl-pyropheophorbide-a (Chl), as a multifunctional electrolyte additive for aprotic zinc batteries to address the related dynamic problems in organic electrolyte systems. The Chl exhibits multisite zincophilicity, which significantly reduces the nucleation potential, increases the nucleation sites, and induces uniform nucleation of Zn metal with a nucleation overpotential close to zero. Furthermore, the lower LUMO of Chl contributes to a Zn-N-bond-containing SEI layer and inhibits the decomposition of the electrolyte. Therefore, the electrolyte enables repeated zinc stripping/plating up to 2000 h (2 Ah cm-2 cumulative capacity) with an overpotential of only 32 mV and a high Coulomb efficiency of 99.4%. This work is expected to enlighten the practical application of organic electrolyte systems.

Engineering Interfacial Built-in Electric Field in Polymetallic Phosphide Heterostructures for Superior Supercapacitors and Electrocatalytic Hydrogen Evolution.

Herein, a patterned rod-like CoP@NiCoP core-shell heterostructure is designed to consist of CoP nanowires cross-linked with NiCoP nanosheets in tight strings. The interfacial interaction within the heterojunction between the two components generates a built-in electric field that adjusts the interfacial charge state and create more active sites, accelerating the charge transfer and improving supercapacitor and electrocatalytic performance. The unique core-shell structure suppresses the volume expansion during charging and discharging, achieving excellent stability. As a result, CoP@NiCoP exhibits a high specific capacitance of 2.9 F cm-2 at a current density of 3 mA cm-2 and a high ion diffusion rate (Dion is 2.95 × 10-14  cm2  s-1 ) during charging/discharging. The assembled asymmetric supercapacitor CoP@NiCoP//AC exhibits a high energy density of 42.2 Wh kg-1 at a power density of 126.5 W kg-1 and excellent stability with a capacitance retention rate of 83.8% after 10 000 cycles. Furthermore, the modulated effect induced by the interfacial interaction also endows the self-supported electrode with excellent electrocatalytic HER performance with an overpotential of 71 mV at 10 mA cm-2 . This research may provide a new perspective on the generation of built-in electric field through the rational design of heterogeneous structures for improving the electrochemical and electrocatalytical performance.

Hollow Starlike Ag/CoMo-LDH Heterojunction with a Tunable d-Band Center for Boosting Oxygen Evolution Reaction Electrocatalysis.

It is a challenging task to utilize efficient electrocatalytic metal hydroxide-based materials for the oxygen evolution reaction (OER) in order to produce clean hydrogen energy through water splitting, primarily due to the restricted availability of active sites and the undesirably high adsorption energies of oxygenated species. To address these challenges simultaneously, we intentionally engineer a hollow star-shaped Ag/CoMo-LDH heterostructure as a highly efficient electrocatalytic system. This design incorporates a considerable number of heterointerfaces between evenly dispersed Ag nanoparticles and CoMo-LDH nanosheets. The heterojunction materials have been prepared using self-assembly, in situ transformation, and spontaneous redox processes. The nanosheet-integrated hollow architecture can prevent active entities from agglomeration and facilitate mass transportation, enabling the constant exposure of active sites. Specifically, the powerful electronic interaction within the heterojunction can successfully regulate the Co3+/Co2+ ratio and the d-band center, resulting in rational optimization of the adsorption and desorption of the intermediates on the site. Benefiting from its well-defined multifunctional structures, the Ag0.4/CoMo-LDH with optimal Ag loading exhibits impressive OER activity, the overpotential being 290 mV to reach a 10 mA cm-2 current density. The present study sheds some new insights into the electron structure modulation of hollow heterostructures toward rationally designing electrocatalytic materials for the OER.

Heterostructure Interface Engineering in CoP/FeP/CeOx with a Tailored d-Band Center for Promising Overall Water Splitting Electrocatalysis.

Accomplishing a green hydrogen economy in reality through water spitting ultimately relies upon earth-abundant efficient electrocatalysts that can simultaneously accelerate the oxygen and hydrogen evolution reactions (OER and HER). The perspective of electronic structure modulation via interface engineering is of great significance to optimize electrocatalytic output but remains a tremendous challenge. Herein, an efficient tactic has been explored to prepare nanosheet-assembly tumbleweed-like CoFeCe-containing precursors with time-/energy-saving and easy-operating features. Subsequently, the final metal phosphide materials containing multiple interfaces, denoted CoP/FeP/CeOx, have been synthesized via the phosphorization process. Through the optimization of the Co/Fe ratio and the content of the rare-earth Ce element, the electrocatalytic activity has been regulated. As a result, bifunctional Co3Fe/Ce0.025 reaches the top of the volcano for both OER and HER simultaneously, with the smallest overpotentials of 285 mV (OER) and 178 mV (HER) at 10 mA cm-2 current density in an alkaline environment. Multicomponent heterostructure interface engineering would lead to more exposed active sites, feasible charge transport, and strong interfacial electronic interaction. More importantly, the appropriate Co/Fe ratio and Ce content can synergistically tailor the d-band center with a downshift to enhance the per-site intrinsic activity. This work would provide valuable insights to regulate the electronic structure of superior electrocatalysts toward water splitting by constructing rare-earth compounds containing multiple heterointerfaces.

Intrinsic capacity and 5-year late-life functional ability trajectories of Chinese older population using ICOPE tool: the Rugao Longevity and Ageing Study.

BACKGROUND AND AIMS: Knowledge of how intrinsic capacity (IC) shape functional ability (FA) trajectories in later life remains unclear. We investigated the changes in IC and their impact on 5-years FA trajectories in the Chinese older population. METHODS: A total of 1640 older adults from the Rugao Longitudinal Ageing Study were included and analyzed. FA was assessed by The Lawton Instrumental Activities of Daily Living Scale (IADLs). We used cognition, psychology, locomotion, sensory capacity, and vitality to capture the multiple domains of IC according to the ICOPE method. The IC was derived retrospectively from variables collected before this was described by WHO. RESULTS: At baseline, a higher IC was associated with higher IADLs (ß = 0.98, 95% CI 0.90, 1.06, P < 0.001). Individuals with declines in IC between wave1 and wave2 experienced a faster decline in IADLs over time (ß = - 0.28, 95% CI - 0.40, - 0.16, P < 0.001) after considering covariates. One or more impairment IC scores at baseline strongly predicted death (HR = 1.20, 95% CI 1.11, 1.30, P < 0.001). In addition, according to the IC scores at baseline, we stratify IC in low, middle, and high, compared with those in the high IC score, those in the low were associated with a 2.56-fold (95% CI 1.64, 4.01, P < 0.001) higher risk of mortality, after adjustment for variables. CONCLUSION: Changes in IC shape FA trajectories. IC impairment is associated with an increased risk of death. Assessing intrinsic capacity would facilitate early identification of older adults at high risk of adverse outcomes and prompt targeted interventions.

The importance of temperature monitoring in predicting wound healing.

CONCLUSION: Upon wound formation, the wound temperature rises in the first 3-4 days until reaching its peak. It then falls at about one week after wound formation. In the second week after wound formation, the wound temperature decreases steadily to the baseline indicating a good wound condition and progression towards healing. While a continuous high temperature is often a sign of excessive inflammation or infection, which indicates urgent need of intervention and treatment.

Bimetal Substitution Enabled Energetic Polyanion Cathode for Sodium-Ion Batteries.

The practical application of Na-superionic conductor structured materials is hindered by limited energy density and structure damage upon activating the third Na+. We propose a bimetal substitution strategy with cheaper Fe and Ni elements for costive vanadium in the polyanion to improve both ionic and electronic conductivities, and a single two-phase reaction during Na+ intercalation/deintercalation and much reduced Na+ diffusion barrier are uncovered by ex-situ X-ray diffraction and density functional theory calculations. Thus, the obtained cathode, Na3Fe0.8VNi0.2(PO4)3, shows excellent electrochemical performances including high specific capacity (102.2 mAh g-1 at 0.1C), excellent rate capability (79.3 mAh g-1 at 20C), cycling stability (84.6% of capacity retention over 1400 cycles at 20C), low-temperature performance (89.7 mAh g-1 at 2C and -10 °C), and structure stability in an extended voltage window for the third Na+ utilization. A competitive energy density of ≈287 Wh kg-1 for full batteries based on cathode and anode materials is also confirmed.

Biohybrid Organic Heterostructure Based on Chlorophyll-Bacteriochlorophyll Aggregates for Ecofriendly Hydrogen Production.

Hydrogen energy is an abundant, clean, sustainable and environmentally friendly renewable energy source. Therefore, the production of hydrogen by photocatalytically splitting water on semiconductors has been considered in recent years as a promising and sustainable strategy for converting solar energy into chemical energy to replace conventional energy sources and to solve the growing problem of environmental pollution and the global energy crisis. However, highly efficient solar-driven photocatalytic hydrogen production remains a huge challenge due to the poor visible light response of available photocatalytic materials and the low efficiency of separation and transfer of photogenerated electron-hole pairs. In the present work, organic heterojunction structures based on bacteriochlorophyll (BChl) and chlorophyll (Chl) molecules were introduced and used for solar-driven photocatalytic hydrogen production from water under visible light. Also, noble metal-free photocatalyst was successfully constructed on Ti3 C2 Tx nanosheets by simple successive deposition of Chl and BChl, which was used for the photocatalytic splitting water to hydrogen evolution reaction (HER). The results show that the optimal BChl@Chl@Ti3 C2 Tx composite has a high HER performance with 114 µmol/h/gcat , which is much higher than the BChl@Ti3 C2 Tx and Chl@Ti3 C2 Tx composites.

Improving the ability of CAR-T cells to hit solid tumors: Challenges and strategies.

Chimeric antigen receptor T cell (CAR-T) therapy is a late-model of immune cell therapy that has been shown to be effective in refractory/recurrent B-cell leukemia and lymphoma. Compared with the traditional anti-tumor methods, CAR-T cell therapy has the advantages of higher specificity, stronger lethality and longer-lasting efficacy. Although CAR-T cells have made significant progress in the treatment of hematologic malignancies, diverse difficulties remain in the treatment of solid tumors, including immune escape due to tumor antigen heterogeneity, preventing entry or limiting the persistence of CAR-T cells by physical or cytokine barriers and along with other immunosuppressive molecule and cells in the tumor microenvironment (TME). Otherwise, the intracellular signaling of CAR also impact on CAR-T cells persistence. Appropriate modification of intracellular costimulatory molecular signal in the structure of CAR or coexpression of CAR and cytokines can provide a way to enhance CAR-T cells activity. Additionally, CAR-T cells dysfunction due to T cell exhaustion is associated with multi-factors, especially transcription factors, such as c-Jun, NR4A. Engineering CAR-T cells to coexpress or knockout transcription factors in favor of TCM memory CAR-T cells differentiation was proved to prolonged the survival of CAR-T cells. Finally, combination of CAR-T cells with oncolytic viruses, nanoparticles or immune checkpoint inhibitors provides an effective measure to improve CAR-T cells function. Here, we discuss all of these advances and challenges and review promising strategies for treating solid tumors. In particular, we also highlight that CAR-T cells have enormous potential to be used in combination with other immunotherapies.

Efficiency improvement of inverted perovskite solar cells enabled by PTAA/MoS2double hole transporters.

Hole transport layer (HTL) plays a critical role in perovskite solar cells (PSCs). We focus on the improvement of PSCs performance with MoS2nanosheets as the anode buffer layer in the inverted photovoltaic structure. PSC with single MoS2buffer layer shows poor performance in power conversion efficiency (PCE) and the long-term stability. By combination of MoS2and Poly[bis(4-phenyl) (2,4,6-trimethylphenyl) amine] (PTAA) as double-layer HTL, the PCE is improved to 18.47%, while the control device with PTAA alone shows a PCE of 14.48%. The same phenomenon is also found in 2D PSCs. For double-layer HTL devices, the PCE reaches 13.19%, and the corresponding PCE of the control group using PTAA alone is 10.13%. This significant improvement is attributed to the reduced interface resistance and improved hole extraction ability as shown by the electric impedance spectroscopy and fluorescence spectroscopy. In addition, the improved device exhibits better stability because the PCE still maintains 66% of the initial value after 500 h of storage, which is higher than the 47% of the remaining PCE from device based on single PTAA or MoS2. Our results demonstrate the potential of polymer/inorganic nanomaterial as a double-layer buffer material for PSCs.