One-step approach to fabricating amphoteric polymer fatliquors for chrome-free tanned leather eco-manufacturing.

The leather manufacturing industry is increasingly embracing chrome-free tanning methods to promote environmental sustainability. However, the transition to chrome-free tanning systems presents a notable obstacle: the incompatibility of traditional anionic wet finishing materials with chrome-free tanned leather due to differences in surface electrical behavior. Herein, an amphoteric polymer, referred to P(AA-co-DMAEMA-co-DA), was synthesized through a simple one-step free radical copolymerization using acrylic acid (AA), dimethylaminoethyl methacrylate (DMAEMA), and dodecyl acrylate (DA). Notably, the isoelectric point of P(AA-co-DMAEMA-co-DA) is 7.7, which contributes to improving the leather's positive electric property and enhancing the binding between the amphoteric polymer fatliquors (APF) and collagen fiber. The APF achieves a remarkable absorption rate of 96.2% and a dyeing uptake rate of 94.3% for anionic dyes, resulting in a uniformly bright surface color of the dyed leather and further significantly reducing the dye usage. Overall, the comprehensive properties of APF align with the electrical origins of organic chrome-free tanning leather, exhibiting a pronounced fatliquoring effect while reducing the dye content in the waste liquor. This contribution holds promise for advancing chrome-free tanning technology toward greener environmental practices.

Chemoselective Fluorogenic Bioconjugation of Vicinal Dithiol-Containing Proteins for Live Cellular Imaging via Small Molecular Conjugate Acceptors.

To develop small molecular fluorogenic tools for the chemoselective labeling of vicinal dithiol-containing proteins (VDPs) in live cells is important for studying intracellular redox homeostasis. With this research, we developed small molecule-based fluorescent probes, achieving selective labeling of VDPs through thiol-thiol substitutions on bisvinylogous thioester conjugated acceptors (IDAs). Initially, IDAs demonstrated its ability to bridge vicinal cysteine-sulfhydryls on a peptide as a mimic. Then, the peptide complex could be decoupled to recover the original peptide-SH in the presence of dithiothreitol. Furthermore, fluorometric signal amplification of the fluorescent probes occurred with high sensitivity, low limit of detection, and selectivity toward vicinal dithiols on reduced bovine serum albumin, as an example of real world VDPs. More importantly, the probes were utilized successfully for labeling of endogenous VDPs at different redox states in live cells. Thus, the bisvinylogous thioester-based receptor as a functional probe represents a new platform for uncovering the function of VDPs in live cells.

Engineering Self-Adaptive Multi-Response Thermochromic Hydrogel for Energy-Saving Smart Windows and Wearable Temperature-Sensing.

Buildings account for ≈40% of the total energy consumption. In addition, it is challenging to control the indoor temperature in extreme weather. Therefore, energy-saving smart windows with light regulation have gained increasing attention. However, most emerging base materials for smart windows have disadvantages, including low transparency at low temperatures, ultra-high phase transition temperature, and scarce applications. Herein, a self-adaptive multi-response thermochromic hydrogel (PHC-Gel) with dual temperature and pH response is engineered through "one-pot" integration tactics. The PHC-Gel exhibits excellent mechanical, adhesion, and electrical conductivity properties. Notably, the low critical solubility temperature (LCST) of PHC-Gel can be regulated over a wide temperature range (20-35 °C). The outdoor practical testing reveals that PHC-Gel has excellent light transmittance at low temperatures and radiation cooling performances at high temperatures, indicating that PHC-Gel can be used for developing energy-saving windows. Actually, PHC-Gel-based thermochromic windows show remarkable visible light transparency (Tlum ≈ 95.2%) and solar modulation (△Tsol ≈ 57.2%). Interestingly, PHC-Gel has superior electrical conductivity, suggesting that PHC-Gel can be utilized to fabricate wearable signal-response and temperature sensors. In summary, PHC-Gel has broad application prospects in energy-saving smart windows, smart wearable sensors, temperature monitors, infant temperature detection, and thermal management.

Facile "Synergistic Inner-Outer Activation" Strategy for Nano-Engineering of Nature-Skin-Derived Wearable Daytime Radiation Cooling Materials.

Natural skin-derived products, as traditional wearable materials are widely used in people's daily life due to the products' excellent origins. Herein, a versatile daytime-radiation cooling wearable natural skin (RC-skin) consisting of the collagen micro-nano fibers with the on-demand double-layer radiation cooling structure is nano-engineered through the proposed facile "synergistic inner-outer activation" strategy. The bottom layer (inner strategy) of the RC-skin is fabricated by filling the skin with the Mg11 (HPO3 )8 (OH)6 nanoparticles by soaking. The superstratum (outer strategy) is constituted by a composite coating with an irregular microporous structure. The RC-skin harvests the inherent advantages of natural building blocks including sufficient hydrophobicity, excellent mechanical properties, and friction resistance. Owing to the subtle double-layer structure design, the solar reflectance and the average emissivity in the mid-infrared band of RC-skin are ≈92.7% and ≈95%, respectively. Therefore, the RC-skin's temperature in the sub-ambient is reduced by ≈7.5 °C. Various outdoor practical application experiments further substantiate that RC-skin has superior radiation cooling performances. Collectively, RC-skin has broad-application prospects for intelligent wearing, low-carbon travel, building materials, and intelligent thermoelectric power generation, and this study also provides novel strategies for developing natural-skin-derived functional materials.

High-value utilization of Cr-containing sludge: Eco-friendly and ultra-low-cost electrocatalyst for efficient OER in alkaline media from Cr-containing sludge.

Economically sustainable development requires more viable waste recycling solutions. In this context, we address the problem of utilizing chromium-containing sludge, a prevalent and environmentally hazardous waste. Meanwhile, sustainable energy development must develop ecology-friendly and low-cost electrocatalysts for the oxygen evolution reaction (OER) in alkaline media. Herein, we report an ultra-low-cost electrocatalyst from chromium-containing sludge. The optimum preparation conditions are determined by optimizing the calcination temperature and the loading of nickel acetylacetonate. The optimized catalyst delivers excellent stability and outstanding OER activity with overpotentials of 320 mV at 10 mA cm-2 in alkaline media. Density functional theory calculations reveal that the energy barrier of OER is decreased because of the catalyst's heterogeneous structure arrangement and confirm the influence of chromium on performance improvement. The concept of "turning waste into treasure" stimulates the search for methods to process Cr-containing waste and produce low-cost, high-performance electrocatalysts.

Thermoresponsive Hemostatic Hydrogel with a Biomimetic Nanostructure Constructed from Aggregated Collagen Nanofibers.

Uncontrollable bleeding poses considerable fatality risks by large-volume blood losses. Current emergency antibleeding handlings including either compression with gauze or "passive" blood transfusion are thus far from ideal, while most recently developed hemostatic agents still share common limitations without considering the subsequent tissue repairing and antibacterial activity after treatment. Herein, we introduce a novel bioinspired aggregated collagen nanofiber-based biocompatible and efficient hemostatic hydrogel material (TS-Gel-Ag-col) prepared by the integration of multifunctional compounds of muco-mimetic poloxamer, polyvinylpyrrolidone, and dencichine/chitosan dialdehyde synergistic crosslinked aggregated collagen nanofibers decorated with silver nanoparticles. Comprehensive material characterization and in vitro and in vivo studies of TS-Gel-Ag-col demonstrate that these materials possess effective antihemorrhagic and antibacterial wound protection effects. Moreover, TS-Gel-Ag-col can facilitate the tissue repairing of skin wounds by promoting revascularization. TS-Gel-Ag-col holds great promise for next-generation collagen-based absorbable hemostatic materials and for the development of smart artificial skins.

Developing super tough gelatin-based hydrogels by incorporating linear poly(methacrylic acid) to facilitate sacrificial hydrogen bonding.

Mechanically robust protein-based hydrogels are strongly desired but their construction remains a significant challenge. In this work, gelatin, together with methacrylic acid, is used to construct a novel hydrogen-bonded hydrogel through a facile low-temperature polymerization and a subsequent dry-swell process. The obtained gel is extremely stiff and tough with a high Young's modulus and a fracture energy of 11 MPa and 8.5 kJ m-2, respectively, which are comparable to the performance of tough synthetic hydrogels, rubber, cartilage, and skin. These gels also show recovery and healing properties as well as biocompatibility and stability in physiological saline solutions. The gel is easy to prepare and exhibits a wide range of functional properties, making it a promising load-bearing material for medical applications.

Structural and Interfacial Properties of Hyperbranched-Linear Polymer Surfactant.

With oleic acid grafting modification, a series of hyperbranched-linear polymer surfactants (HLPS) were prepared by hydroxyl-terminated hyperbranched polymer (HBP), which was gained through a step synthesis method using trimethylolpropane and AB2 monomer. The AB2 monomers were obtained through the Michael addition reaction of methyl acrylate and diethanol amine. The structures of HLPS were characterised by Fourier transform infrared spectrophotometer and nuclear magnetic resonance (NMR), which indicated that HBP was successfully modified by oleic acid. Furthermore, the properties of surface tension and critical micelle concentration of HLPS solution showed that HLPS can significantly reduce the surface tension of water. The morphology of the HLPS solution was characterised by dynamic light scattering, which revealed that HLPS exhibited a nonmonotonic appearance in particle size at different scattering angles owing to the different replaced linear portions. The relationships of the surface pressure to monolayer area and time were measured using the Langmuir-Blodgett instrument, which showed that the surface tension of monolayer molecules increased with the increasing of hydrophobic groups. In addition, the interface conditions of different replaced HLPS solutions were simulated.

Engineering eco-friendly and biodegradable biomass-based multifunctional antibacterial packaging films for sustainable food preservation.

The study presents a new class of eco-friendly and biodegradable biomass-based multifunctional antibacterial packaging films (G-OCSI) based on oxidized corn starch-based nonionic biopolymer (OCSI) and gelatin (Gel), and investigates the effects of different OCSI contents on the properties of G-OCSI. The results demonstrated that G-OCSI 0.25 had good water vapor barrier properties, antioxidant activity (DPPH RSA: 85.84 %), UV resistance (UV blocking > 99.9 %), water resistance (WCA: 122.30°), and tensile properties. Based on the disk diffusion experiment, G-OCSI exhibited significant bactericidal and antibacterial effects against S. aureus and E. coli. Moreover, G-OCSI had good biodegradability in natural environments, and could obviously accelerate the crops growth. Finally, a banana preservation experiment confirmed that G-OCSI could significantly extend the shelf life of bananas at room temperature at least 3 days. The biodegradable packaging films not only realizes the sustainable utilization of biomass resources but also has the potential to replace traditional petroleum-based plastics.

A temperature and pressure dual-responsive, stretchable, healable, adhesive, and biocompatible carboxymethyl cellulose-based conductive hydrogels for flexible wearable strain sensor.

The study aimed to develop a novel temperature and pressure dual-responsive conductive hydrogel with self-healing, self-adhesive, biocompatible, and stretchable properties, for the development of multifunctional anti-counterfeiting and wearable flexible electronic materials. A conductive hydrogel based on carboxymethyl cellulose (CMC) was synthesized by simple "one pot" free radical polymerization of CMC, acrylamide (AAm) and acrylic acid (AAc). The hydrogel displayed temperature responsiveness and possessed an upper critical solution temperature (UCST) value. In addition, hydrogels also had surprising pressure responsiveness. The synthesized hydrogels were characterized by FTIR, TGA, DSC, and XRD analysis. Importantly, the obtained hydrogels exhibited exceptional mechanical properties (stress: 730 kPa, strain: 880%), fatigue resistance, stretchability, self-healing capability, self-adhesive properties, and conductivity. In addition, valuable insights were obtained into the synthesis and application of flexible anti-counterfeiting and camouflage materials by the temperature and pressure dual-responsive hydrogels. Moreover, the prepared hydrogel, with an electrically sensitive perception of external strain (GF = 2.61, response time: 80 ms), can be utilized for monitoring human movement, emotional changes, physiological signals, language, and more, rendering it suitable for novel flexible anti-counterfeiting materials and versatile wearable iontronics. Overall, this study provided novel insights into the simple and efficient synthesis and sustainable manufacturing of environmentally friendly multifunctional anti-counterfeiting materials and flexible electronic skin sensors.

2-dimensional impact-damping electrostatic actuators with elastomer-enhanced auxetic structure.

Biomimetic robots yearn for compliant actuators that are comparable to biological muscle in both functions and structural properties. For that, electrostatic actuators have been developed to imitate bio-muscle in features of fast response, high power, energy-efficiency, etc. However, those actuators typically lack impact damping performance, making them vulnerable and unstable in real applications. Here, we present auxetic electrostatic actuators that address this issue and demonstrate muscle-like performance by using elastomer-enhanced auxetics and electrostatic zipping mechanism. The proposed actuators contract linearly on applied voltage, producing large actuation strength (15 N) and contraction ratio (59%). Fabricated from readily available materials, our prototypes can quickly attenuate vibrations caused by impacts and absorb shock energy in 0.3 s. Furthermore, leveraging their 2-dimensional working mode and self-locking mechanism, a stiffness-changing muscle for a robotic arm and an active tensegrity device exemplify the potential applications of auxetic electrostatic actuators to a wide range of bionic robots.

Development of an activatable Lysosome-targeted fluorescent probe for the detection of endogenous ONOO- levels.

The liver plays a crucial role in several important processes in the human body, including metabolism, detoxification, and immune function. When the liver experiences acute injury, it can cause significant harm and requires prompt detection. Traditional biomarkers lack specificity and cannot detect changes in real-time, making them unsuitable for monitoring pathological processes. Recent studies have shown that acute liver injury (ALI) is closely related to oxidative stress, with peroxynitrite (ONOO-) being a vital byproduct of liver metabolism and become a critical biomarker for detecting liver damage. As a result, this research developed an activatable near-infrared fluorescent probe W-3a that can be used to detect endogenous ONOO- in a mouse model of ALI induced by lipopolysaccharides (LPS). The probe has high selectivity and anti-interference ability, with a reaction time <10 min and a detection limit of 85 nM. It was successfully utilized in detecting endogenous ONOO- in cells and live imaging of ALI mice.

Biomimetic Exogenous "Tissue Batteries" as Artificial Power Sources for Implantable Bioelectronic Devices Manufacturing.

Implantable bioelectronic devices (IBDs) have gained attention for their capacity to conformably detect physiological and pathological signals and further provide internal therapy. However, traditional power sources integrated into these IBDs possess intricate limitations such as bulkiness, rigidity, and biotoxicity. Recently, artificial "tissue batteries" (ATBs) have diffusely developed as artificial power sources for IBDs manufacturing, enabling comprehensive biological-activity monitoring, diagnosis, and therapy. ATBs are on-demand and designed to accommodate the soft and confining curved placement space of organisms, minimizing interface discrepancies, and providing ample power for clinical applications. This review presents the near-term advancements in ATBs, with a focus on their miniaturization, flexibility, biodegradability, and power density. Furthermore, it delves into material-screening, structural-design, and energy density across three distinct categories of TBs, distinguished by power supply strategies. These types encompass innovative energy storage devices (chemical batteries and supercapacitors), power conversion devices that harness power from human-body (biofuel cells, thermoelectric nanogenerators, bio-potential devices, piezoelectric harvesters, and triboelectric devices), and energy transfer devices that receive and utilize external energy (radiofrequency-ultrasound energy harvesters, ultrasound-induced energy harvesters, and photovoltaic devices). Ultimately, future challenges and prospects emphasize ATBs with the indispensability of bio-safety, flexibility, and high-volume energy density as crucial components in long-term implantable bioelectronic devices.

Advances in the preparation and application of cellulose-based antimicrobial materials: A review.

The rise of polymer materials in modern life has drawn attention to renewable, easily biodegradable, environmentally-friendly bio-based polymers. Notably, significant research has been dedicated to creating green antimicrobial functional materials for the biomedical field using natural polymer materials. Cellulose is a rich natural biomass organic polymer material. Given its favorable attributes like film-forming capability, biodegradability, and biocompatibility, it is extensively employed to tackle a wide range of challenges confronting humanity today. However, its inherent drawbacks, such as insolubility in water and most organic solvents, hygroscopic nature, difficulty in melting, and limited antimicrobial properties, continue to pose challenges for realizing the high-value applications of cellulose. Achieving multifunctionality and more efficient application of cellulose still poses major challenges. In this regard, the current development status of cellulose materials was reviewed, covering the classification, preparation methods, and application status of cellulose-based antimicrobial materials. The application value of cellulose-based antimicrobial materials in biomedicine, textiles, food packaging, cosmetics and wastewater treatment was summarised. Finally, insights were provided into the developing prospects of cellulose-based antimicrobial materials were provided.

Progress in synthesis, modification, characterization and applications of hyperbranched polyphosphate polyesters.

Hyperbranched polyphosphate polyesters (HPPs) as a special class of hyperbranched polymers have attracted increased interest and have been intensively studied, because of peculiar structures, excellent biocompatibility, flexibility in physicochemical properties, biodegradability, water soluble, thermal stability, and mechanical properties. HPPs can be divided into phosphates as monomers and phosphates as end groups. In this article, the classification, general synthesis, modifications, and applications of HPP are reviewed. In addition, recent developments in the application of HPP are described, such as modified or functionalized by end capping and hypergrafting to improve the performances in polymer blends, coatings, flame retardant, leather. Furthermore, the modifications and application of HPPs in biomedical materials, such as drug delivery and bone regeneration were discussed. In summary, the hyperbranched polymer enlarges its application range and improves its application performance compared with conventional polymer. In the future, more new HPPs composite materials will be developed through hyperbranched technique. This review of HPPs will provide useful theoretical basis and technical support for the development of new hyperbranched polymer material.

Extraction of chitin from flammulina velutipes waste: A low-concentration acid pretreatment and aspergillus Niger fermentation approach.

In recent years, with the booming of the edible mushroom industry, chitin production has become increasingly dependent on fungi and other non-traditional sources. Fungal chitin has advantages including superior performance, simpler separation processes, abundant raw materials, and the absence of shellfish allergens. As a kind of edible mushroom, flammulina velutipes (F. velutipes) also has the advantages of wide source and large annual yield. This provided the possibility for the extraction of chitin. Here, a procedure to extract chitin from F. velutipes waste be presented. This method comprises low-concentration acid pretreatment coupled with consolidated bioprocessing with Aspergillus niger. Characterization by SEM, FTIR, XRD, NMR, and TGA confirmed that the extracted chitin was ß-chitin. To achieve optimal fermentation of F. velutipes waste (80 g/L), ammonium sulfate and glucose were selected as nitrogen and carbon sources (5 g/L), with a fermentation time of 5 days. The extracted chitin could be further deacetylated and purified to obtain high-purity chitosan (99.2 % ± 1.07 %). This chitosan exhibited a wide degree of deacetylation (50.0 % ± 1.33 % - 92.1 % ± 0.97 %) and a molecular weight distribution of 92-192 kDa. Notably, the yield of chitosan extracted in this study was increased by 56.3 % ± 0.47 % compared to the traditional chemical extraction method.

Discarded enoki mushroom root-derived multifunctional chrome-free chitosan-based tanning agent for eco-leathers manufacturing: Tanning-dyeing, non-acid soaking, and non-basifying.

The aim of this study was to develop new discarded enoki mushroom root-derived multifunctional chrome-free chitosan-based tanning agents that can be used for eco-leather manufacturing. In this study, oligochitosan (OCS) was prepared from chitosan extracted from the enoki mushrooms and chemically modified using reactive dye R19 and epichlorohydrin (ECH) to prepare chromium-free tanning agent (OCS-R19-ECH) with both tanning and dyeing functions. FT-IR, XRD, and NMR (1H) confirmed the successful synthesis of the product. The molecular weight of OCS-R19-ECH is 6355 g/mol, with an average particle size of 1249.37 nm and an epoxy value of 0.276 mol/100 g. OCS-R19-ECH was used for tanning experiments on bated sheepskin, and the results showed that the leather tanned with OCS-R19-ECH not only exhibited excellent wet-heat stability (shrinkage temperature = 81 °C), but also superior dyeing uniformity, resistance to dry and wet abrasion, mechanical strength (tensile strength = 12.4 MPa, tear strength = 57.3 N/mm), and outstanding antimicrobial properties. Most importantly, compared with traditional tanning agents, OCS-R19-ECH has a higher pH (9.0), tanning-dyeing integration, non-acid soaking, and non-basifying can be achieved in leather making, which can greatly simplify the tanning processes. This new multifunctional chrome-free chitosan-based tanning agent facilitates high-value utilization of waste resources.

New plant polyphenol-derived tannic acid-based chromium-free tanning agent for sustainable and clean leather production.

This study aimed to prepare a new bio-based chromium-free tanning agent. The green epoxide monocase ethylene glycol diglycidyl ether (EGDE) was grafted with tannic acid (TA) derived from natural plant using the one-pot method to synthesize new plant polyphenol-derived tannic acid-based chromium-free tanning agents (TA-EGDE) with abundant terminal epoxides. FTIR, 1H NMR, XPS, GPC, SEM, and other analytical techniques were used to characterize tanning agents. These consequences manifested that EGDE was successfully grafted with the phenol hydroxyl group of TA. The epoxide value of TA-EGDE showed a tendency to increase and then decrease with increasing EGDE dosage, and the epoxide value of TA-EGDE-2 attained a maximum of 0.262 mol/100 g. GPC analysis showed that the formula weight of the prepared TA-EGDE was partially distributed above 5000 Da. The tanning experiment demonstrated that the shrinkage temperatures (Ts) of the TA-EGDE-tanned leathers were all higher than 81.5 °C. Compared with the traditional commercial chromium-free tanning agent (F-90, TWS), TA-EGDE-tanned leathers exhibited higher Ts and better mechanical properties. The TA-EGDE prepared in this study not only has ecological environmental protection but also provides finished leather with good moisture, heat resistance, and mechanical properties.

Reversible immobilization of cellulase on gelatin for efficient insoluble cellulose hydrolysis.

Immobilized enzymes are one of the most common tools used in enzyme engineering, as they can substantially reduce the cost of enzyme isolation and use. However, efficient catalysis of solid substrates using immobilized enzymes is challenging, hydrolysis of insoluble cellulose by immobilized cellulases is a typical example of this problem. In this study, inspired by bees and honeycombs, we prepared gelatin-modified cellulase (BEE) and gelatin hydrogels (HONEYCOMB) to achieve reversible recycling versus release of cellulase through temperature-responsive changes in the triple-stranded helix-like interactions between BEE and HONEYCOMB. At elevated temperatures, BEE was released from HONEYCOMB and participated in hydrolytic saccharification. After 24 h, the glucose yields of both the free enzyme and BEE reached the same level. When the temperature was decreased, BEE recombined with HONEYCOMB to facilitate the effective separation and recycling of BEE from the system. The enzymatic system retained >70 % activity after four reuse cycles. In addition, this system showed good biocompatibility and environmental safety. This method increases the mass transfer capacity and enables easy recovery of immobilized cellulase, thereby serving as a valuable strategy for the immobilization of other enzymes.

Atomic-scale Ru anchored on chromium-shavings as a precursor for a pH-universal hydrogen evolution reaction electrocatalyst.

In the leather manufacturing industry, the management of substantial quantities of solid waste containing chrome shavings remains a formidable challenge. Concurrently, there is a pressing need for the development of pH-universal and economically viable electrocatalysts for the hydrogen evolution reaction (HER). In response to these intertwined challenges, this study proposes an innovative approach wherein the amino groups present on the surface of chrome shavings are utilized to immobilize single ruthenium atoms during pyrolysis, thereby facilitating the synthesis of hydrogen evolution electrocatalysts. The optimized sample, denoted as CN/Cr2O3/Ru-1, demonstrates exceptional electrocatalytic performance, exhibiting an ultra-low overpotential of -28 mV in 1.0 M KOH at a current density of 10 mA cm-2, and it also exhibits good performance in acidic and neutral electrolytes. Importantly, these overpotentials surpass those reported for many previous ruthenium-based catalysts. Density functional theory (DFT) calculations elucidate that both oxygen (O) and chromium (Cr) moieties within Cr2O3 can engage in favorable interactions with the coordination patterns of the ruthenium (Ru) atoms, thereby elucidating the synergistic enhancement conferred by the chromium element in CN/Cr2O3/Ru, which ultimately facilitates and promotes the catalytic activity of the ruthenium atoms serving as the catalytic center. This facile synthesis route not only presents a green solution for addressing waste chromium pollutants but also offers a promising avenue for the development of high-performance, cost-efficient electrocatalysts.