The transcription factors GmVOZ1A and GmWRI1a synergistically regulate oil biosynthesis in soybean.

Soybean [Glycine max (L.) Merr.] is a major oil-producing crop worldwide. Although several related proteins regulating soybean oil accumulation have been reported, little is known about the regulatory mechanisms. In this study, we characterized vascular plant one-zinc-finger 1A (GmVOZ1A) that interacts with WRINKLED 1a (GmWRI1a) using yeast two-hybrid library screening. The GmVOZ1A-GmWRI1a interaction was further verified by protein-protein interaction assays in vivo and in vitro. GmVOZ1A enhanced the seed fatty acid and oil contents by regulating genes involved in lipid biosynthesis. Conversely, a loss-of-function mutation in GmVOZ1A resulted in a reduction in triacylglycerol (TAG) content in soybean. Protein-DNA interaction assays revealed that GmVOZ1A and GmWRI1a cooperate to up-regulate the expression level of acyl-coenzymeA-binding protein 6a (GmACBP6a) and promote the accumulation of TAG. In addition, GmACBP6a overexpression promoted seed fatty acid and oil contents, as well as increased seed size and 100-seed weight. Taken together, these findings indicate that the transcription factor GmVOZ1A regulates soybean oil synthesis and cooperates with GmWRI1a to up-regulate GmACBP6a expression and oil biosynthesis in soybean. The results lay a foundation for a comprehensive understanding of the regulatory mechanisms underlying soybean oil biosynthesis and will contribute to improving soybean oil production through molecular breeding approaches.

In Situ Transformation of an Amorphous Supramolecular Coating to a Hydrogen-Bonded Organic Framework Membrane to Trigger Selective Gas Permeation.

We introduce a "solution-processing-transformation" strategy, deploying solvent vapor as scaffolds, to fabricate high-quality hydrogen-bonded organic framework (HOF) membranes. This strategy can overcome the mismatch in processing conditions and crystal growth thermodynamics faced during the facile solution processing of the membrane. The procedure includes the vapor-trigged in situ transformation of dense amorphous supramolecules to crystalline HOF-16, with HOF-11 as the transient state. The mechanism involves a vapor-activated dissolution-precipitation equilibrium shifting and hydrogen bonding-guided molecule rearrangement, elucidated through combined experimental and theoretical analysis. Upon removal of the molecular scaffolds, the resulting HOF-16 membranes showcase significant improvement in hydrogen separation performance over their amorphous counterparts and previously reported HOF membranes. The method's broad applicability is evidenced by successfully extending it to other substrates and HOF structures. This study provides a fundamental understanding of guest-induced ordered supramolecular assembly and paves the way for the advanced manufacture of high-performance HOF membranes for gas separation processes.

pH/magnetic dual responsive Pickering emulsion stabilized by Fe3O4@SiO2@chitosan nanoparticles.

In recent years, Pickering emulsifiers have been widely used in various production fields due to their excellent structural stability, biocompatibility and environmental friendliness. For some applications, it is required that the emulsifier can quickly respond to environmental stimuli and control the transition between stable and unstable emulsions. In this paper, we report a novel composite Pickering emulsifier with Fe3O4 as the core and magnetic response recognition body, silica as the intermediate protective layer, and chitosan (CS) of different molecular weights to endow solid particles with surface activity and pH-responsive properties. This emulsifier can stabilize the emulsion in the emulsion system with deionized water as the aqueous phase and liquid paraffin as the oil phase and can control the demulsification of the formed emulsion under the dual pH/magnetic stimulation. The experimental results show that Fe3O4@SiO2@CS has good paramagnetism and pH responsiveness. The particle size of the composite emulsifier nanoparticles is between 90 nm and 120 nm, and the best stabilizing effect of the emulsion is achieved when the dosage is 0.5 wt%. In the pH range of 3-11, the emulsifier can rapidly demulsify a stable paraffin oil-water emulsion system under the action of a magnetic field of strength 0.4 T. The pH response of the emulsifier is as follows: when pH ≤ 2, the system can form a stable emulsion, which is composed of fully protonated chitosan as a free chain segment and Fe3O4@SiO2. Emulsion stabilization was achieved with monolithic Fe3O4@SiO2@CS as an emulsifier at pH > 2, and demulsification was achieved at pH ≈ pKb (CS) at 298 K. The research in this paper can provide a feasible idea and synthesis method for the preparation of organic-inorganic composite structure emulsifier.

A dissipative particle dynamics simulation of controlled loading and responsive release of theranostic agents from reversible crosslinked triblock copolymer vesicles.

To control the transport stability and release efficiency of loaded theranostic drugs in triblock copolymer carriers, the reversible crosslinking ability is of great significance. A molecular level exploration of such a function is needed to extend existing stabilizing and responsive dissociation mechanisms of carriers. Here, dissipative particle dynamics simulations were used to first demonstrate the formation of triblock copolymer vesicular carriers. Chemical crosslinking was used to strengthen the structural stability of the vesicle shell to avoid drug leakage. Reversible decrosslinking along with dissociation of the vesicle and release of loaded drugs were then explored. The structural, energetic and dynamical properties of the system were discussed at the molecular level. The regulation mechanism of drug release patterns was revealed by systematically exploring the effect of intra and intermolecular repulsive interactions. The results indicate that the chemical crosslinking of copolymers enhanced the compactness of the vesicle shell with a strengthened microstructure, increased binding energy, and limited chain migration, thus achieving more stable delivery of drugs. In terms of drug release, we clarified how the pairwise interactions of beads in the solution system affect the responsive dissociation of the vesicle and associated release patterns (speed and amount) of drugs. More efficient delivery and smart release of theranostic drugs are achieved using such reversible crosslinked triblock copolymer vesicles.

Diagnostic value of anti-Müllerian hormone combined with androgen-levels in Chinese patients with polycystic ovary syndrome.

OBJECTIVE: To establish a cutoff level of AMH which could help for the diagnosis of PCOS, to investigate the predictive value of AMH combined with androgens in Chinese women to diagnose PCOS. MATERIALS AND METHODS: This is a prospective case control study, 550 women recruited (aged 20-40 years), in which 450 PCOS women recruited according to the Rotterdam criteria and 100 non-PCOS women in the control group were from the women for the pregnancy preparation examination. AMH were measured by the Elecsys AMH Plus immunoassay. Androgens and other sex hormone were measured. The validity of AMH toward the diagnosis of PCOS, or AMH combined with total testosterone, free testosterone, bioavailable testosterone and androstenedione was estimated by receiver operating characteristic (ROC)curves, and correlations between paired variables was estimated by Spearman's rank correlation coefficient. RESULTS: The cutoff value of AMH in Chinese reproductive-age women with PCOS is 4.64 ng/mL, AUC under the curve is 0.938, with 81.6% sensitivity, and 92.0% specificity. Total testosterone, free testosterone, bioactive testosterone, and androstenedione are significantly higher in women with PCOS of reproductive age than in controls. The combination of AMH and free testosterone resulted in a higher AUC of 94.8%, with higher sensitivity (86.1%) and excellent specificity (90.3%) for the prediction of PCOS. CONCLUSION: The Elecsys AMH Plus immunoassay, with a cutoff of 4.64 ng/mL, is a robust method for identifying PCOM to aid in PCOS diagnosis. The combination of AMH and free testosterone resulted in a higher AUC of 94.8% for the diagnose of PCOS.

Epac-2 ameliorates spontaneous colitis in Il-10-/- mice by protecting the intestinal barrier and suppressing NF-κB/MAPK signalling.

Intestinal barrier dysfunction and intestinal inflammation interact in the progression of Crohn's disease (CD). A recent study indicated that Epac-2 protected the intestinal barrier and had anti-inflammatory effects. The present study examined the function of Epac-2 in CD-like colitis. Interleukin-10 gene knockout (Il-10-/- ) mice exhibit significant spontaneous enteritis and were used as the CD model. These mice were treated with Epac-2 agonists (Me-cAMP) or Epac-2 antagonists (HJC-0350) or were fed normally (control), and colitis and intestinal barrier structure and function were compared. A Caco-2 and RAW 264.7 cell co-culture system were used to analyse the effects of Epac-2 on the cross-talk between intestinal epithelial cells and inflammatory cells. Epac-2 activation significantly ameliorated colitis in mice, which was indicated by reductions in the colitis inflammation score, the expression of inflammatory factors and intestinal permeability. Epac-2 activation also decreased Caco-2 cell permeability in an LPS-induced cell co-culture system. Epac-2 activation significantly suppressed nuclear factor (NF)-κB/mitogen-activated protein kinase (MAPK) signalling in vivo and in vitro. Epac-2 may be a therapeutic target for CD based on its anti-inflammatory functions and protective effects on the intestinal barrier.

Designing polymersomes with inhomogeneous membranes by co-assembly of block copolymers for controlled morphological reversibility.

Polymersomes with inhomogeneous membranes in composition and structure have generated widespread interest for the preparation of functionalized nanocarriers. We propose a simple but versatile strategy to manipulate inhomogeneous subdomains on polymersome membranes by the co-assembly of block copolymer blends with varied molecular architectures and chemistries. Both binary and ternary copolymer blends are considered to construct polymersomes, and the subdomains of the membranes are formed by controlling the difference in the flexibility and rigidity of different blocks. This difference contributes to the formation of disk-like domains (by rigid blocks) and soft domains (by flexible blocks) on the membrane. An interesting effect of this structure is that in response to external stimuli, the soft membrane domain becomes worm-like or porous to "open" the polymersome for matter exchange, while the rigid domain stays undecomposed and acts like an anchor binding all flexible copolymers. Once the external stimuli disappear, all flexible copolymers can be pulled back to restore the original polymersome morphology (i.e., "close" the polymersome). The specific morphological reversibility of hybrid polymersomes holds great potential for practical applications where changeable membrane permeability or shape under environmental stimuli is highly needed.

Abnormal fasting blood glucose enhances the risk of long-term exposure to air pollution on dyslipidemia: A cross-sectional study.

Both long-term exposure to air pollution and abnormal fasting blood glucose (FBG) are linked to dyslipidemia prevalence. However, the joint role of air pollution and FBG on dyslipidemia remains unknown clearly. In this study, we aimed to test whether abnormal FBG could enhance the risks of long-term exposure to air pollutants on dyslipidemia in general Chinese adult population. The present study recruited 8917 participants from 4 cities in Hebei province, China. Participants' individual exposure to air pollutants was evaluated by the Empirical Bayesian Kriging statistical model in ArcGIS10.2 geographic information system. Dyslipidemia was defined according to Guidelines for the Prevention and Treatment of Dyslipidemia in Chinese Adults. Subjects were grouped into normal, prediabetes, diabetes according to FBG level. Generalized linear models were applied to analyze the interaction of air pollutants and FBG on dyslipidemia prevalence. The prevalence of dyslipidemia was 43.83% in our investigation. After adjusting all covariates, we found the risk of four air pollutants (PM2.5, PM10, NO2, SO2) on dyslipidemia prevalence was stronger as higher FBG level, and the adjusted odd ratio of interaction (ORinter (95% CI)) between PM2.5, PM10, NO2, SO2 and FBG levels on dyslipidemia was 1.171 (1.162, 1.189), 1.119 (1.111, 1.127), 1.124 (1.115, 1.130), 1.107 (1.098, 1.115), respectively. Stratified analyses indicated the modifying effects of FBG on the association of air pollution with dyslipidemia were stronger among male, less than 65 years old, overweight/obesity (all Pinter<0.1). Our study concluded that high FBG levels strengthened the risk of long-term exposure to air pollution on dyslipidemia, especially more noticeable in male, less than 65 years old, overweight.

Research Progress on Transorgan Regulation of the Cardiovascular and Motor System through Cardiogenic Exosomes.

The heart is the core organ of the circulatory system. Through the blood circulation system, it has close contact with all tissues and cells in the body. An exosome is an extracellular vesicle enclosed by a phospholipid bilayer. A variety of heart tissue cells can secrete and release exosomes, which transfer RNAs, lipids, proteins, and other biomolecules to adjacent or remote cells, mediate intercellular communication, and regulate the physiological and pathological activities of target cells. Cardiogenic exosomes play an important role in regulating almost all pathological and physiological processes of the heart. In addition, they can also reach distant tissues and organs through the peripheral circulation, exerting profound influence on their functional status. In this paper, the composition and function of cardiogenic exosomes, the factors affecting cardiogenic exosomes and their roles in cardiovascular physiology and pathophysiology are discussed, and the close relationship between cardiovascular system and motor system is innovatively explored from the perspective of exosomes. This study provides a reference for the development and application of exosomes in regenerative medicine and sports health, and also provides a new idea for revealing the close relationship between the heart and other organ systems.

Overexpression of Soybean GmWRI1a Stably Increases the Seed Oil Content in Soybean.

WRINKLED1 (WRI1), an APETALA2/ethylene-responsive-element-binding protein (AP2/EREBP) subfamily transcription factor, plays a crucial role in the transcriptional regulation of plant fatty acid biosynthesis. In this study, GmWRI1a was overexpressed in the soybean cultivar 'Dongnong 50' using Agrobacterium-mediated transformation to generate three transgenic lines with high seed oil contents. PCR and Southern blotting analysis showed that the T-DNA was inserted into the genome at precise insertion sites and was stably inherited by the progeny. Expression analysis using qRT-PCR and Western blotting indicated that GmWRI1a and bar driven by the CaMV 35S promoter were significantly upregulated in the transgenic plants at different developmental stages. Transcriptome sequencing results showed there were obvious differences in gene expression between transgenic line and transgenic receptor during seed developmental stages. KEGG analysis found that the differentially expressed genes mainly annotated to metabolic pathways, such as carbohydrated metabolism and lipid metabolism. A 2-year single-location field trial revealed that three transgenic lines overexpressing GmWRI1a (GmWRI1a-OE) showed a stable increase in seed oil content of 4.97-10.35%. Importantly, no significant effect on protein content and yield was observed. Overexpression of GmWRI1a changed the fatty acid composition by increasing the linoleic acid (C18:2) content and decreasing the palmitic acid (C16:0) content in the seed. The three GmWRI1a-OE lines showed no significant changes in agronomic traits. The results demonstrated that the three GmWRI1a overexpression lines exhibited consistent increases in seed oil content compared with that of the wild type and did not significantly affect the seed yield and agronomic traits. The genetic engineering of GmWRI1a will be an effective strategy for the improvement of seed oil content and value in soybean.

Crown ethers in hydrogenated graphene.

Crown ethers could serve as hosts to selectively incorporate various guest atoms or molecules within the macrocycles. However, the high flexibility of crown ether molecules limits their applications in areas requiring a higher binding strength and selectivity. As an important graphene derivate, graphane, which is composed of entirely sp3 hybridized carbon atoms and possesses the characteristic of non-wrinkle in contrast to graphene, provides an ideal two-dimensional platform to rigidify crown ether molecules. In this work, using first principles calculations, we demonstrate that the embedment of various crown ethers with different cavity sizes in the graphane lattice are thermodynamically and kinetically stable. Compared with the corresponding crown ether molecules, the binding strength for alkali metal cations can be increased by up to ∼14 times, which may provide a good means in the field of alkali metal cation separation. Meanwhile, the electronic properties of graphane could be tuned in a range of 4.43-5.85 eV by controlling the densities of the crown ethers. These crown ether graphanes are also good candidates for the photolysis of water. Therefore, considering the easy synthesis and tunable crystal structures of graphane, we expect that our findings will trigger a new wave of research and applications of both crown ethers and graphane.

Knife-edge interferogram analysis for corrosive wear propagation at sharp edges.

This paper presents a novel noncontact measurement and inspection method based on knife-edge diffraction theory for corrosive wear propagation monitoring at a sharp edge. The degree of corrosion on the sharp edge was quantitatively traced in process by knife-edge interferometry (KEI). The measurement system consists of a laser diode, an avalanche photodiode, and a linear stage for scanning. KEI utilizes the interferometric fringes projected on the measurement plane when the light is incident on a sharp edge. The corrosion propagation on sharp edges was characterized by analyzing the difference in the two interferometric fringes obtained from the control and measurement groups. By using the cross-correlation algorithm, the corrosion conditions on sharp edges were quantitatively quantified into two factors: lag and similarity for edge loss and edge roughness, respectively. The KEI sensor noise level was estimated at 0.03% in full scale. The computational approach to knife-edge diffraction was validated by experimental validation, and the computational error was evaluated at less than 1%. Two sets of razor blades for measurement and control groups were used. As a result, the lag will be increased at an edge loss ratio of 1.007/µm due to the corrosive wear, while the similarity will be decreased at a ratio of 5.4×10-4/µm with respect to edge roughness change. Experimental results showed a good agreement with computational results.

One-step Ethylene Purification from an Acetylene/Ethylene/Ethane Ternary Mixture by Cyclopentadiene Cobalt-Functionalized Metal-Organic Frameworks.

The separation of ethylene (C2 H4 ) from a mixture of ethane (C2 H6 ), ethylene (C2 H4 ), and acetylene (C2 H2 ) at normal temperature and pressure is a significant challenge. The sieving effect of pores is powerless due to the similar molecular size and kinetic diameter of these molecules. We report a new modification method based on a stable ftw topological Zr-MOF platform (MOF-525). Introduction of a cyclopentadiene cobalt functional group led to new ftw-type MOFs materials (UPC-612 and UPC-613), which increase the host-guest interaction and achieve efficient ethylene purification from the mixture of hydrocarbon gases. The high performance of UPC-612 and UPC-613 for C2 H2 /C2 H4 /C2 H6 separation has been verified by gas sorption isotherms, density functional theory (DFT), and experimentally determined breakthrough curves. This work provides a one-step separation of the ternary gas mixture and can further serve as a blueprint for the design and construction of function-oriented porous structures for such applications.

AutoProteome Chip System for Fully Automated and Integrated Proteomics Sample Preparation and Peptide Fractionation.

With recent advances in LC-MS systems, current MS-based proteomics has an increasing need for automated, high-throughput sample preparation with neglectable sample loss. In this study, we developed a microfluidic system for fully automated proteomics sample preparation. All of the required proteomics sample preparation steps for both protein digestion and peptide fractionation are fully integrated into a disposable plastic chip device (named AutoProteome Chip). The AutoProteome Chip packed with mixed-mode ion exchange beads and C18 membrane in tandem could be fabricated with very low cost and high stability in organic reagents. Benefiting from its low backpressure, the AutoProteome Chip could be precisely driven by gas pressure, which could be easily multiplexed. As low as 2 ng of standard protein BSA could be trapped into the AutoProteome chip and processed within 2 h. Fully automated processing of 10 µg of protein extracts of HEK 293T cells achieved more than 97% of digestion efficiency with missed cleavage less than 2 and comparable performance with conventional approaches. More than 4700 proteins could be readily identified within 80 min of LC-MS analysis with good label-free quantification performance (Pearson correlation coefficient >0.99). Furthermore, deep proteome profiling by integrated high-pH RP fractionation in the same AutoProteome Chip resulted in more than 7500 proteins being identified from only 20 µg of protein extracts of HEK 293T cells and comparable reprodicibility as single-shot analysis. The AutoProteome Chip system provided a valuable prototype for developing a fully automated proteome analysis workflow and for proteomic applications with high demand for processing throughput, reproducibility, and sensitivity.

Directed Self-Assembly of Patchy Microgels into Anisotropic Nanostructures.

Multi-geometry nanostructures with high-order, complex, and controllable geometries have attracted extensive attention in the development of functional nanomaterials. A simple and versatile strategy is proposed to construct various anisotropic nanostructures through the directed self-assembly (DSA) of patchy microgels. A general criterion for interaction parameters is developed by the variance analysis method to achieve the formation of 1D nanorods by the single directional DSA process, and 2D or 3D polymorphs including V/T/h/cross shapes, multiple arms, multi-directional bending, single/multiple rings, nanocages, etc., by the multi-directional DSA process of binary microgel blends. At the optimum interaction parameters, the nanorods exhibit the quickest formation process and the most thermodynamically stable geometry, while the various 2D or 3D assemblies exhibit controlled jointing behaviors for versatile assembly geometries. The number of recognition sites on the patchy microgel surface guides the aggregation modes of microgels during the DSA process. These assemblies can bear large curvature variance with the increase of shear rates due to the high flexibility and the ability of adjusting orientation spontaneously. The DSA behavior of patchy microgels differs from the traditional self-assembly process of block copolymers, which may open a new route for guiding the formation of controllable nanoparticle architectures.

Harnessed Dopant Block Copolymers Assist Decorating Membrane Pores: A Dissipative Particle Dynamics Study.

Self-assembly of asymmetric block copolymers (BCPs) around active pore edges has emerged as an important strategy to produce smart membranes with tunable pathways for solute transport. However, thus far, it is still challenging to manipulate pore shape and functionality for directional transformation under external stimuli. Here, a versatile strategy by mesoscale simulations to design stimuli-responsive pores with various edge decorations in hybrid membranes is reported. Dopant BCPs are used as decorators to stabilize pore edges and extend their function in reconfiguring pores in response to repeated membrane stretching/shrinking caused by external stimuli. The decoration morphologies are predictable since the assemblies of dopant BCPs around pore edges are closely related to their self-assemblies in solution. The coassembly between different BCPs in the hybrid membrane for the control of pore morphology is featured, and the parameter settings, including block incompatibility and molecular architecture for the construction of a specific pore, are determined. Results show that harnessed dopant BCPs in the hybrid membrane can enhance pore formation and induce directional pore shape and functionality transformation. Diversified pore decorations exhibit potential that can be further explored in selective solute transport and the design of stimuli-responsive smart nanodevices.

Serum cystatin C is increased in acute spinal cord injury: a multicentre retrospective study.

STUDY DESIGN: A multicentre retrospective study. OBJECTIVE: A multicentre retrospective study was performed to observe the changes in serum cystatin C (CysC) levels in patients with acute spinal cord injury (SCI). SETTING: Four hospitals in China. METHODS: Over a 5-year study period, the CysC, creatinine (Cr), and blood urea nitrogen (BUN) levels of people who had incurred SCI in the preceding 7 days were collected and compared with those of people with limb fracture (LF) who were matched for injury time and gender. People with SCI also were grouped by injury duration, ASIA Impairment Scale (AIS) grade and the presence or absence of steroid therapy and compared each day. RESULTS: Three hundred and twenty-three samples from people with SCI were retrospectively collected; their mean serum CysC levels were significantly higher than those of people with LF (p < 0.001); No significant difference was observed in Cr or BUN levels between the two groups (p > 0.14). CysC levels increased on the second day, peaked on day 3, and returned to normal on day 5. The more severely injured individuals had higher CysC levels. Steroid therapy or not had no influence for CysC levels. CONCLUSION: CysC levels are increased in patients with acute SCI, possibly as a direct result of injury. Serum CysC is a potential biomarker of SCI.

Down-regulation of FTX promotes the differentiation of osteoclasts in osteoporosis through the Notch1 signaling pathway by targeting miR-137.

BACKGROUND: Osteoporosis (OP) is one of the commonly seen bone diseases with low bone mineral densities and trauma fractures. Accumulative studies have demonstrated that the occurrence of OP is closely related to osteoclasts differentiation. LncRNA FTX has been demonstrated to inhibit the development of some human cancers. However, its potential functions in human OP remains to be elusive. METHODS: The expressions of FTX and miR-137 in bone and serum samples of patients with or without OP were measured. Bioinformatics analysis, RIP assays and luciferase reporter assays were performed to examine the upstream and downstream transactional factors of miR-137. Functional assays were conducted to check the roles of the Notching1 signaling pathway OP. RESULTS: FTX was suppressed in OP samples and serums, however, miR-137 was greatly elevated. FTX reduced osteoclast-genesis and inhibited osteogenic differentiation by targeting miR-137. This also inhibited the Notch1 signaling pathway. CONCLUSION: Our experiments and results pointed out that lncRNA FTX up-regulated miR-137 in OP through the Notch1 signaling pathway.

Fabrication of a Hydrogen-Bonded Organic Framework Membrane through Solution Processing for Pressure-Regulated Gas Separation.

Ordered and flexible porous frameworks with solution processability are highly desirable to fabricate continuous and large-scale membranes for the efficient gas separation. Herein, the first microporous hydrogen-bonded organic framework (HOF) membrane has been fabricated by an optimized solution-processing technique. The framework exhibits the superior stability because of the abundant hydrogen bonds and strong π-π interactions. Thanks to the flexible HOF structure, the membrane possesses the unprecedented pressure-responsive H2 /N2 separation performance. Furthermore, the scratched membrane can be healed by the treatment of solvent vapor, achieving the recovery of separation performance.

Ultrasensitive Detection of Human Chorionic Gonadotropin Using Frequency Locked Microtoroid Optical Resonators.

Clean sport competition is of significant concern to many governments and sporting organizations. Highly sensitive and rapid sensors are needed to improve the detection of performance enhancing drugs in sports as athletes take diuretics to dilute the concentration of drugs in their urine and microdose under the detectable limits of current sensors. Here we demonstrate, using frequency locked microtoroid optical resonators, a 3 orders of magnitude improvement in detection limit over the current gold standard, mass spectrometry, for the common performance enhancing drug, human chorionic gonadotropin (hCG). hCG, also known as the pregnancy hormone, was detected both in simulated urine and in the urine of pregnant donors at a concentration of 1 and 3 femtomolar, respectively. We anticipate that the sensitivity provided by frequency locked optical microcavities can enable a new standard in antidoping research.