Immunogenicity of Conjugated and Polysaccharide Pneumococcal Vaccines Administered During Pregnancy or Postpartum to Women With HIV.

BACKGROUND: Pneumococcal vaccination is recommended in people with HIV, prioritizing PCV. We compared the immunogenicity of PCV-10 and PPV-23 administered antepartum or postpartum. METHODS: This double-blind study randomized 346 pregnant women with HIV on antiretrovirals to PCV-10, PPV-23, or placebo at 14-34 weeks gestational age. Women who received placebo antepartum were randomized at 24 weeks postpartum to PCV-10 or PPV-23. Antibodies against 7 serotypes common to both vaccines and 1 serotype only in PPV-23 were measured by ELISA/chemiluminescence; B- and T-cell responses to serotype 1 by FLUOROSPOT; and plasma cytokines/chemokines by chemiluminescence. RESULTS: Antibody responses were higher after postpartum versus antepartum vaccination. PCV-10 generated lower antibody levels than PPV-23 against 4 and higher against 1 of 7 common serotypes. Additional factors associated with high postvaccination antibody concentrations were high prevaccination antibody concentrations and CD4+ cells; low CD8+ cells and plasma HIV RNA; and several plasma cytokines/chemokines. Serotype 1 B- and T-cell memory did not increase after vaccination. CONCLUSIONS: Antepartum immunization generated suboptimal antibody responses, suggesting that postpartum booster doses may be beneficial and warrant further studies. Considering that PCV-10 and PPV-23 had similar immunogenicity, but PPV-23 covered more serotypes, use of PPV-23 may be prioritized in women with HIV on antiretroviral therapy. CLINICAL TRAILS REGISTRATION: NCT02717494.

Effect of Maternal Immunization With 10-Valent Pneumococcus Conjugate Vaccine (PCV-10), 23-Valent Pneumococcus Polysaccharide Vaccine, or Placebo on the Immunogenicity of PCV-10 in Human Immunodeficiency Virus-Exposed Uninfected Infants: A Randomized Clinical Trial.

BACKGROUND: The effect of pneumococcal vaccination of mothers with human immunodeficiency virus (HIV) on infant responses to childhood vaccination has not been studied. We compared the immunogenicity of 10-valent pneumococcus conjugate vaccine (PCV-10) in HIV-exposed uninfected infants born to mothers who received PCV-10, 23-valent pneumococcus polysaccharide vaccine (PPV-23), or placebo during pregnancy. METHODS: Antibody levels against 7 serotypes were measured at birth, before the first and second doses of PCV-10m and after completion of the 2-dose regimen in 347 infants, including 112 born to mothers who received PPV-23, 112 who received PCV-10, and 119 who received placebo during pregnancy. Seroprotection was defined by antibody levels ≥0.35 µg/mL. RESULTS: At birth and at 8 weeks of life, antibody levels were similar in infants born to PCV-10 or PPV-23 recipients and higher than in those born to placebo recipient. After the last dose of PCV-10, infants in the maternal PCV-10 group had significantly lower antibody levels against 5 serotypes than those in the maternal PPV-23 group and against 3 serotypes than those in the maternal placebo group, and they did not have higher antibody levels against any serotype. The seroprotection rate against 7 serotypes was 50% in infants in the maternal PCV-10 group, compared with 71% in both of the maternal PPV-23 and placebo groups (P < .001). CONCLUSIONS: Administration of PCV-10 during pregnancy was associated with decreased antibody responses to PCV-10 and seroprotection rates in infants. Considering that PCV-10 and PPV-23 had similar immunogenicity in pregnant women with HIV and that administration of PPV-23 did not affect the immunogenicity of PCV-10 in infants, PPV-23 in pregnancy may be preferred over PCV-10.

Chromatographic Approach to Isolate Exfoliated Graphene.

A chromatographic approach for separating exfoliated graphene from natural flake graphite is presented. Graphene is an extremely strong, electrically and thermally conductive two-dimensional hexagonal array of carbon atoms with the potential to transform applications such as supercapacitors, composites, biosensors, ultra-thin touchscreens, and solar cells. However, many of these applications require the use of exfoliated graphene, and the current cost of this material can be prohibitive. The most cost-effective source of graphene is exfoliated graphite, and numerous approaches have been proposed for exfoliating graphite to graphene. Solution approaches are the most common, with graphite often exfoliated by extended sonication treatment followed by separation of graphene from graphite using centrifugation. This time-consuming approach results in low concentrations of small lateral dimension graphene, often in high-boiling-point organic solvents or containing stabilizers. In this study, a chromatographic approach is used in combination with a solvent interface trapping method of graphite exfoliation to isolate graphene. The interface trapping exfoliation approach uses a hydrophobic/hydrophilic solvent interface to spontaneously exfoliate graphite and form a graphene-stabilized water-in-oil emulsion. This emulsion contains both graphene and graphite, and when added to water-wet glass beads, graphene adsorbs onto the glass surface, leaving graphite in the hydrophobic mobile phase, where it is removed by washing with an additional oil phase. The efficiency of this scalable approach to separation is demonstrated by Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and Tyndall effect scattering.

Effect of Aqueous Anions on Graphene Exfoliation.

Ion partitioning behavior in electrolyte solutions plays an important role in drug delivery and therapeutics, protein folding, materials science, filtration, and energy applications such as supercapacitors. Here, we show that the segregation of ions in solutions also plays an important role in the exfoliation of natural flake graphite to pristine graphene. Polarizable anions such as iodide and acetate segregate to the interfacial region of the aqueous phase during solvent interfacial trapping exfoliation of graphene. Ordered water layers and accumulated charges near the graphene surface aid in separating graphene sheets from bulk graphite, and, more importantly, reduce the reversibility of the exfoliation event. The observed phenomenon results not only in the improved stability of graphene-stabilized emulsions but also in a low-cost and environmentally friendly way of enhancing the production of graphene.

Acceptability and tolerability of long-acting injectable cabotegravir or rilpivirine in the first cohort of virologically suppressed adolescents living with HIV (IMPAACT 2017/MOCHA): a secondary analysis of a phase 1/2, multicentre, open-label, non-comparative dose-finding study.

BACKGROUND: Long-acting injectable cabotegravir and rilpivirine have demonstrated safety, acceptability, and efficacy in adults living with HIV-1. The IMPAACT 2017 study (MOCHA study) was the first to use these injectable formulations in adolescents (aged 12-17 years) living with HIV-1. Herein, we report acceptability and tolerability outcomes in cohort 1 of the study. METHODS: In this a secondary analysis of a phase 1/2, multicentre, open-label, non-comparative dose-finding study, with continuation of pre-study oral combination antiretroviral treatment (ART), 55 adolescents living with HIV-1 were enrolled to receive sequential doses of either long-acting cabotegravir or rilpivirine and 52 received at least two injections. Participants had a body weight greater than 35 kg and BMI less than 31·5 kg/m2 and had been on stable ART for at least 90 consecutive days with an HIV-1 viral load of less than 50 copies per mL at a participating IMPAACT study site. Participants had to be willing to continue their pre-study ART during cohort 1. The primary objectives of the study were to confirm doses for oral and injectable cabotegravir and for injectable rilpivirine in adolescents living with HIV. This analysis of participant-reported outcomes included a face scale assessment of pain at each injection and a Pediatric Quality of Life Inventory (PedsQL) at baseline and week 16 for participants in the USA, South Africa, Botswana, and Thailand. A subset of 11 adolescents and 11 parents or caregivers in the USA underwent in-depth interviews after receipt of one or two injections. This trial is registered at ClinicalTrials.gov, NCT03497676. FINDINGS: Between March 19, 2019, and Nov 25, 2021, 55 participants were enrolled into cohort 1. Using the six-point face scale, 43 (83%) of participants at week 4 and 38 (73%) at week 8 reported that the injection caused "no hurt" or "hurts little bit", while only a single (2%) participant for each week rated the pain as one of the two highest pain levels. Quality of life was not diminished by the addition of one injectable antiretroviral. In-depth interviews revealed that parents and caregivers in the USA frequently had more hesitancy than adolescents about use of long-acting formulations, but parental acceptance was higher after their children received injections. INTERPRETATION: High acceptability and tolerability of long-acting cabotegravir or rilpivirine injections suggests that these are likely to be favoured treatment options for some adolescents living with HIV. FUNDING: National Institutes of Health and ViiV Healthcare.

Safety and pharmacokinetics of oral and long-acting injectable cabotegravir or long-acting injectable rilpivirine in virologically suppressed adolescents with HIV (IMPAACT 2017/MOCHA): a phase 1/2, multicentre, open-label, non-comparative, dose-finding study.

BACKGROUND: Combined intramuscular long-acting cabotegravir and long-acting rilpivirine constitute the first long-acting combination antiretroviral therapy (ART) regimen approved for adults with HIV. The goal of the IMPAACT 2017 study (MOCHA [More Options for Children and Adolescents]) was to assess the safety and pharmacokinetics of these drugs in adolescents. METHODS: In this phase 1/2, multicentre, open-label, non-comparative, dose-finding study, virologically suppressed adolescents (aged 12-17 years; weight ≥35 kg; BMI ≤31·5 kg/m2) with HIV-1 on daily oral ART were enrolled at 15 centres in four countries (Botswana, South Africa, Thailand, and the USA). After 4-6 weeks of oral cabotegravir (cohort 1C) or rilpivirine (cohort 1R), participants received intramuscular long-acting cabotegravir or long-acting rilpivirine every 4 weeks or 8 weeks per the adult dosing regimens, while continuing pre-study ART. The primary outcomes were assessments of safety measures, including all adverse events, until week 4 for oral cabotegravir and until week 16 for long-acting cabotegravir and long-acting rilpivirine, and pharmacokinetic measures, including the area under the plasma concentration versus time curve during the dosing interval (AUC0-tau) and drug concentrations, at week 2 for oral dosing of cabotegravir and at week 16 for intramuscular dosing of cabotegravir and rilpivirine. Enrolment into cohort 1C or cohort 1R was based on the participant's pre-study ART, meaning that masking was not done. For pharmacokinetic analyses, blood samples were drawn at weeks 2-4 after oral dosing and weeks 4-16 after intramuscular dosing. Safety outcome measures were summarised using frequencies, percentages, and exact 95% CIs; pharmacokinetic parameters were summarised using descriptive statistics. This trial is registered at ClinicalTrials.gov, NCT03497676, and is closed to enrolment. FINDINGS: Between March 19, 2019, and Nov 25, 2021, 55 participants were enrolled: 30 in cohort 1C and 25 in cohort 1R. At week 16, 28 (97%, 95% CI 82-100) of the 29 dose-evaluable participants in cohort 1C and 21 (91%; 72-99) of the 23 dose-evaluable participants in cohort 1R had reported at least one adverse event, with the most common being injection-site pain (nine [31%] in cohort 1C; nine [39%] in cohort 1R; none were severe). One (4%, 95% CI 0-22) participant in cohort 1R had an adverse event of grade 3 or higher, leading to treatment discontinuation, which was defined as acute rilpivirine-related allergic reaction (self-limiting generalised urticaria) after the first oral dose. No deaths or life-threatening events occurred. In cohort 1C, the week 2 median cabotegravir AUC0-tau was 148·5 (range 37·2-433·1) µg·h/mL. The week 16 median concentrations for the every-4-weeks and every-8-weeks dosing was 3·11 µg/mL (range 1·22-6·19) and 1·15 µg/mL (<0·025-5·29) for cabotegravir and 52·9 ng/mL (31·9-148·0) and 39·1 ng/mL (27·2-81·3) for rilpivirine, respectively. These concentrations were similar to those in adults. INTERPRETATION: Study data support using long-acting cabotegravir or long-acting rilpivirine, given every 4 weeks or 8 weeks, per the adult dosing regimens, in virologically suppressed adolescents aged 12 years and older and weighing at least 35 kg. FUNDING: The National Institutes of Health and ViiV Healthcare.

Pharmacokinetics, safety, and tolerability of dispersible and immediate-release abacavir, dolutegravir, and lamivudine tablets in children with HIV (IMPAACT 2019): week 24 results of an open-label, multicentre, phase 1-2 dose-confirmation study.

BACKGROUND: Child-friendly fixed-dose combination (FDC) antiretroviral therapy (ART) options are limited. We evaluated the pharmacokinetics, safety, and tolerability of dispersible and immediate-release FDC abacavir, dolutegravir, and lamivudine taken once per day in children younger than 12 years with HIV. METHODS: IMPAACT 2019 was an international, phase 1-2, multisite, open-label, non-comparative dose-confirmation study of abacavir, dolutegravir, and lamivudine in children younger than 12 years. Participants were enrolled across five weight bands: those weighing 6 kg to less than 25 kg received abacavir (60 mg), dolutegravir (5 mg), and lamivudine (30 mg) dispersible tablets (three to six tablets depending on body weight), and those weighing 25 kg to less than 40 kg received abacavir (600 mg), dolutegravir (50 mg), and lamivudine (300 mg) in an immediate-release tablet. At entry, participants were ART naive or ART experienced and virologically suppressed on stable ART for 6 months or more. Dose confirmation was based on pharmacokinetic and safety criteria in the first five to seven participants in each weight band to week 4; all participants were followed up to week 48. We present the results for the primary objectives to assess pharmacokinetics, confirm dosing, and evaluate safety through 24 weeks across all weight bands. The trial is registered with ClinicalTrials.gov (NCT03760458). FINDINGS: 57 children were enrolled and initiated study drug (26 [46%] female and 31 [54%] male; 37 [65%] Black, 18 [32%] Asian, and 1 [2%] had race reported as unknown). Within each weight band, 6 kg to less than 10 kg, 10 kg to less than 14 kg, 14 kg to less than 20 kg, 20 kg to less than 25 kg, and 25 kg or higher: the geometric mean dolutegravir area under the concentration time curve over the 24 h dosing interval (AUC0-24 h) was 75·9 h·µg/mL (33·7%), 91·0 h·µg/mL (36·5%), 71·4 h·µg/mL (23·5%), 84·4 h·µg/mL (26·3%), and 71·8 h·µg/mL (13·9%); dolutegravir concentrations 24 h after dosage (C24 h) were 0·91 µg/mL (67·6%), 1·22 µg/mL (77·5%), 0·79 µg/mL (44·2%), 1·35 µg/mL (95·5%), and 0·98 µg/mL (27·9%); abacavir AUC0-24 h was 17·7 h·µg/mL (38·8%), 19·8 h·µg/mL (50·6%), 15·1 h·µg/mL (40·3%), 17·4 h·µg/mL (19·4%), and 25·7 h·µg/mL (14·6%); lamivudine AUC0-24 h was 10·7 h·µg/mL (46·0%), 14·2 h·µg/mL (23·9%), 13·0 h·µg/mL (15·6%), 14·5 h·µg/mL (16·6%), and 21·7 h·µg/mL (26·2%), respectively. Pharmacokinetic targets and safety criteria were met within each weight band, and thus dosing of abacavir, dolutegravir, and lamivudine was confirmed at the originally selected doses. 54 (95%) of participants were treatment experienced and all who continued taking the study drug remained virologically suppressed (<200 copies per mL) through week 24. Virological suppression was achieved in two of three participants who were ART naive by week 24. There were no grade 3 or higher adverse events related to abacavir, dolutegravir, and lamivudine and no discontinuations because of toxicity to week 24. Both formulations were well tolerated. INTERPRETATION: Dosing of abacavir, dolutegravir, and lamivudine was confirmed in children weighing 6 kg to less than 40 kg, and both FDC formulations were safe, well tolerated, and efficacious through 24 weeks of treatment. These findings support global efforts to expand the availability of FDC abacavir, dolutegravir, and lamivudine to children with HIV. FUNDING: National Institute of Allergy and Infectious Diseases, the Eunice Kennedy Shriver National Institute of Child Health and Human Development, the National Institute of Mental Health, ViiV Healthcare, and GlaxoSmithKline.

Solvent-Free Direct PEGylation of Collagen Fibers.

The addition of poly(ethylene glycol) (PEG) to biomolecules and biomaterials is a well-established approach to modify their properties for therapeutic applications. For biomaterials, the approach is typically to blend or electrospray the synthetic polymer with the biomaterial. Effective surface modification approaches such as surface-initiated polymer brushes are challenging since the harsh solvents required for brush synthesis may destroy the biomaterial. Herein, we describe the PEGylation of collagen fibers by surface-initiated PEG brushes using a living anionic grafting-from mechanism. This brush synthesis is done in the absence of solvents to minimize the degradation of the native collagen structure. We quantify the effect the brush synthesis has on the native structure of the collagen fiber using differential scanning calorimetry (DSC) and find that even at long reaction times a significant fraction of the native structure remains. Dynamic mechanical analysis indicates the collagen undergoes only modest structural degradation, while adhesion studies find a significant improvement of antifouling properties. Further, our approach opens the way for further chemistry, as the growing polymer chain is a potassium alkoxy group that can be functionalized by termination or by subsequent reaction by a wide variety of molecules.

Intra-articular injection of epigallocatechin (EGCG) crosslinks and alters biomechanical properties of articular cartilage, a study via nanoindentation.

Osteoarthritis and rheumatoid arthritis are debilitating conditions, affecting millions of people. Both osteoarthritis and rheumatoid arthritis degrade the articular cartilage (AC) at the ends of long bones, resulting in weakened tissue prone to further damage. This degradation impairs the cartilage's mechanical properties leading to areas of thinned cartilage and exposed bone which compromises the integrity of the joint. No preventative measures exist for joint destruction. Discovering a way to slow the degradation of AC or prevent it would slow the painful progression of the disease, allowing millions to live pain-free. Recently, that the articular injection of the polyphenol epigallocatechin-gallate (EGCG) slows AC damage in an arthritis rat model. It was suggested that EGCG crosslinks AC and makes it resistant to degradation. However, direct evidence that intraarticular injection of EGCG crosslinks cartilage collagen and changes its compressive properties are not known. The aim of this study was to investigate the effects of intraarticular injection of EGCG induced biomechanical properties of AC. We hypothesize that in vivo exposure EGCG will bind and crosslink to AC collagen and alter its biomechanical properties. We developed a technique of nano-indentation to investigate articular cartilage properties by measuring cartilage compressive properties and quantifying differences due to EGCG exposure. In this study, the rat knee joint was subjected to a series of intraarticular injections of EGCG and contralateral knee joint was injected with saline. After the injections animals were sacrificed, and the knees were removed and tested in an anatomically relevant model of nanoindentation. All mechanical data was normalized to the measurements in the contralateral knee to better compare data between the animals. The data demonstrated significant increases for reduced elastic modulus (57.5%), hardness (83.2%), and stiffness (17.6%) in cartilage treated with injections of EGCG normalized to those treated with just saline solution when compared to baseline subjects without injections, with a significance level of alpha = 0.05. This data provides evidence that EGCG treated cartilage yields a strengthened cartilage matrix as compared to AC from the saline injected knees. These findings are significant because the increase in cartilage biomechanics will translate into resistance to degradation in arthritis. Furthermore, the data suggest for the first time that it is possible to strengthen the articular cartilage by intraarticular injections of polyphenols. Although this data is preliminary, it suggests that clinical applications of EGCG treated cartilage could yield strengthened tissue with the potential to resist or compensate for matrix degradation caused by arthritis.

Self-Assembled Graphene Composites for Flow-Through Filtration.

Spontaneously exfoliated pristine graphene is used as a surfactant to template the formation of electrically conductive filters for the adsorption of an organic dye from water. In contrast to other reported graphene-based adsorption materials, our system provides a continuous approach to water treatment rather than a batch approach, and uses pristine graphene instead of the more costly and environmentally challenging graphene oxide. The use of self-assembled graphene also results in our filters being electrically conductive, providing a convenient route to clean the filters by resistive heating. An investigation of the mechanism of formation and filtration by these filters, templated by self-assembled two-dimensional pristine graphene, is presented. The thermodynamically driven exfoliation of natural flake graphite at a high-energy monomer/water interface produces water-in-oil emulsions stabilized by a thin layer of overlapping graphene sheets. Subsequent polymerization of the continuous monomer phase produces polymer foams with cells lined by graphene. With a combination of acoustic spectroscopy and electron microscopy, the effects of graphite concentration and temperature are studied, as is the correlation between droplet size and the size of the cells in the final polymer foam.

Controlled radical polymerization of hydrophilic and zwitterionic brush-like polymers from silk fibroin surfaces.

Bombyx mori silk fibroin is a fibrous protein whose tunable properties and biocompatibility have resulted in its utility in a wide-variety of applications, including as drug delivery vehicles, wound dressings, and tissue engineering scaffolds. Control of protein and cell attachment is vital to the performance of biomaterials, but silk fibroin is mostly hydrophobic and interacts nonspecifically with cells and proteins. Silk functionalised with hydrophilic polymers reduces attachment, but the low number of reactive sites makes achieving a uniform conjugation a persistent challenge. This work presents a new approach to grow brush-like polymers from the surface of degradable silk films, where the films were enriched with hydroxyl groups, functionalised with an initiator, and finally reacted with acrylate monomers using atom transfer radical polymerisation. Two different routes to hydroxyl enrichment were investigated, one involving reaction with ethylene oxide (EO) and the other using a two-step photo-catalysed oxidation reaction. Both routes increased surface hydrophilicity, and hydrophilic monomers containing either uncharged (poly(ethylene glycol), PEG) pendant groups or zwitterionic pendant groups were polymerised from the surfaces. The initial processing of the films to induce beta sheet structures was found to impact the success of the polymerizations. Compared to the EO modified or unmodified silk surfaces, the oxidation reaction resulted in more polymer conjugation and the surfaces appear more uniform. Mesenchymal stem cell and protein attachment were the lowest on polymers grown from oxidised surfaces. PEG-containing brush-like polymers displayed lower protein attachment than surfaces conjugated with PEG using a previously reported "grafting to" method, but polymers containing zwitterionic side chains displayed both the lowest contact angles and the lowest cell and protein attachment. This finding may arise from the interactions of the zwitterionic pendant groups through their permanent dipoles and is an important finding because PEG is susceptible to oxidative damage that can reduce efficacy over time. These modified silk materials with lower cell and protein attachments are envisioned to find utility when enhanced diffusion around surfaces is required, such as in drug delivery implants.

Altering and investigating the surfactant properties of graphene oxide.

Graphene oxide (GO) is a two-dimensional material with a hydrophobic carbon lattice functionalized with hydrophilic oxygen groups on the edges and basal plane. Its hydrophobic/hydrophilic nature allows it to behave as a surfactant, stabilizing emulsions of oil in water. In the investigation described here, we study GO's emulsifying ability by using it to template the polymerization of polystyrene while tuning the hydrophobicity and degree of oxidation of the GO sheets. SEM, TGA, optical microscopy, acoustic spectroscopy, and digital image analysis are used to characterize the system. The size of the GO templated PS spheres is found to be a function of the amount of GO in the system, with too little GO resulting in PS spheres with no GO shell. Increasing the hydrophobicity of the sheets is shown to lead to the formation of inverse emulsions, while increasing the graphitic character of the GO results in distorted styrene droplets as the GO sheets become more planar and less able to conform to a smoothly curving interface.