Bioinspired Approaches to Engineer Antithrombogenic Medical Devices for Vascular Intervention.

Medical devices form a critical component of health care systems for treating and maintaining patient health. However, devices exposed to blood are prone to blood clotting (thrombosis) and bleeding complications leading to device occlusion, device failure, embolism and stroke, and increased morbidity and mortality. Over the years, developments in innovative material design strategies have been made to help reduce the occurrence of thrombotic events on medical devices, but complications persist. Here, we review material and surface coating technologies that have taken bioinspiration from the endothelium to reduce medical device thrombosis, either by mimicking aspects of the glycocalyx to prevent adhesion of proteins and cells to the material surface or mimicking the bioactive function of the endothelium through immobilized or released bioactive molecules to actively inhibit thrombosis. We highlight newer strategies that take inspiration from multiple aspects of the endothelium or are stimuli responsive, only releasing antithrombotic biomolecules when thrombosis is triggered. Emerging areas of innovation target inflammation to decrease thrombosis without increasing bleeding, and interesting results are coming from underexplored aspects of material properties, such as material interfacial mobility and stiffness, which show that increased mobility and decreased stiffness are less thrombogenic. These exciting new strategies require further research and development before clinical translation, including consideration of longevity, cost, and sterilization, but show capacity for the development of more sophisticated antithrombotic medical device materials.

Plasma Activation of Microplates Optimized for One-Step Reagent-Free Immobilization of DNA and Protein.

Activated microplates are widely used in biological assays and cell culture to immobilize biomolecules, either through passive physical adsorption or covalent cross-linking. Covalent attachment gives greater stability in complex biological mixtures. However, current multistep chemical activation methods add complexity and cost, require specific functional groups, and can introduce cytotoxic chemicals that affect downstream cellular applications. Here, we show a method for one-step linker-free activation of microplates by energetic ions from plasma for covalent immobilization of DNA and protein. Two types of energetic ion plasma treatment were shown to be effective: plasma immersion ion implantation (PIII) and plasma-activated coating (PAC). This is the first time that PIII and PAC have been reported in microwell plates with nonflat geometry. We confirm that the plasma treatment generates radical-activated surfaces at the bottom of wells despite potential shadowing from the walls. Comprehensive surface characterization studies were used to compare the PIII and PAC microplate surface composition, wettability, radical density, optical properties, stability, and biomolecule immobilization density. PAC plates were found to have more nitrogen and lower radical density and were more hydrophobic and more stable over 3 months than PIII plates. Optimal conditions were obtained for high-density DNA (PAC, 0 or 21% nitrogen, pH 3-4) and streptavidin (PAC, 21% nitrogen, pH 5-7) binding while retaining optical properties required for typical high-throughput biochemical microplate assays, such as low autofluorescence and high transparency. DNA hybridization and protein activity of immobilized molecules were confirmed. We show that PAC activation allows for high-density covalent immobilization of functional DNA and protein in a single step on both 96- and 384-well plates without specific linker chemistry. These microplates could be used in the future to bind other user-selected ligands in a wide range of applications, for example, for solid phase polymerase chain reaction and stem cell culture and differentiation.

Optimising the value of immunomodulatory drugs during induction and maintenance in transplant ineligible patients with newly diagnosed multiple myeloma: results from Myeloma XI, a multicentre, open-label, randomised, Phase III trial.

Second-generation immunomodulatory agents, such as lenalidomide, have a more favourable side-effect profile than the first-generation thalidomide, but their optimum combination and duration for patients with newly diagnosed transplant-ineligible myeloma (ND-TNE-MM) has not been defined. The most appropriate delivery and dosing regimens of these therapies for patients at advanced age and frailty status is also unclear. The Myeloma XI study compared cyclophosphamide, thalidomide and dexamethasone (CTDa) to cyclophosphamide, lenalidomide and dexamethasone (CRDa) as induction therapy, followed by a maintenance randomisation between ongoing therapy with lenalidomide or observation for patients with ND-TNE-MM. CRDa deepened response but did not improve progression-free (PFS) or overall survival (OS) compared to CTDa. However, analysis by age group highlighted significant differences in tolerability in older, frailer patients that may have limited treatment delivery and impacted outcome. Deeper responses and PFS and OS benefits with CRDa over CTDs were seen in patients aged ≤70 years, with an increase in toxicity and discontinuation observed in older patients. Our results highlight the importance of considering age and frailty in the approach to therapy for patients with ND-TNE-MM, highlighting the need for prospective validation of frailty adapted therapy approaches, which may improve outcomes by tailoring treatment to the individual.

Lenalidomide before and after autologous stem cell transplantation for transplant-eligible patients of all ages in the randomized, phase III, Myeloma XI trial.

The optimal way to use immunomodulatory drugs as components of induction and maintenance therapy for multiple myeloma is unresolved. We addressed this question in a large phase III randomized trial, Myeloma XI. Patients with newly diagnosed multiple myeloma (n = 2042) were randomized to induction therapy with cyclophosphamide, thalidomide, and dexamethasone (CTD) or cyclophosphamide, lenalidomide, and dexamethasone (CRD). Additional intensification therapy with cyclophosphamide, bortezomib and dexamethasone (CVD) was administered before ASCT to patients with a suboptimal response to induction therapy using a response-adapted approach. After receiving high-dose melphalan with autologous stem cell transplantation (ASCT), eligible patients were further randomized to receive either lenalidomide alone or observation alone. Co-primary endpoints were progression-free survival (PFS) and overall survival (OS). The CRD regimen was associated with significantly longer PFS (median: 36 vs. 33 months; hazard ratio [HR], 0.85; 95% confidence interval [CI], 0.75-0.96; P = 0.0116) and OS (3-year OS: 82.9% vs. 77.0%; HR, 0.77; 95% CI, 0.63-0.93; P = 0.0072) compared with CTD. The PFS and OS results favored CRD over CTD across all subgroups, including patients with International Staging System stage III disease (HR for PFS, 0.73; 95% CI, 0.58-0.93; HR for OS, 0.78; 95% CI, 0.56-1.09), high-risk cytogenetics (HR for PFS, 0.60; 95% CI, 0.43-0.84; HR for OS, 0.70; 95% CI, 0.42-1.15) and ultra high-risk cytogenetics (HR for PFS, 0.67; 95% CI, 0.41-1.11; HR for OS, 0.65; 95% CI, 0.34-1.25). Among patients randomized to lenalidomide maintenance (n = 451) or observation (n = 377), maintenance therapy improved PFS (median: 50 vs. 28 months; HR, 0.47; 95% CI, 0.37-0.60; P < 0.0001). Optimal results for PFS and OS were achieved in the patients who received CRD induction and lenalidomide maintenance. The trial was registered with the EU Clinical Trials Register (EudraCT 2009-010956-93) and ISRCTN49407852.

Life and death of liquid-infused surfaces: a review on the choice, analysis and fate of the infused liquid layer.

Liquid-infused surfaces (or lubricant-infused surfaces) (LIS) are a new class of functional materials introduced in 2011. Their exceptional properties have earned them a place at the forefront of many fields including anti-biofouling, anti-icing, anti-corrosion, drag reduction, droplet manipulation and drop-wise condensation. Integral to their success is the infused lubricant layer which affords them their properties. In this review, we examine the current state of the literature relating to the lubricant layer. We consider the lubricant through all stages in the surface's lifecycle from design, to use, all the way through to depletion and eventual failure. First, we examine trends in lubricant choice and how to choose a lubricant, including environmental and medical considerations. We then look at the different methods used to infuse lubricant into surfaces and how lubricant depletes from the surface. We then report direct and indirect methods to characterise the thickness and distribution of the lubricant layer. Finally, we examine how droplets interact with LIS and the unique properties afforded by the lubricant before providing an outlook into where research centred on understanding the lubricant layer is heading in the new decade.

Addition of gemcitabine to paclitaxel, epirubicin, and cyclophosphamide adjuvant chemotherapy for women with early-stage breast cancer (tAnGo): final 10-year follow-up of an open-label, randomised, phase 3 trial.

BACKGROUND: The tAnGo trial was designed to investigate the potential role of gemcitabine when added to anthracycline and taxane-containing adjuvant chemotherapy for early breast cancer. When this study was developed, gemcitabine had shown significant activity in metastatic breast cancer, and there was evidence of a favourable interaction with paclitaxel. METHODS: tAnGo was an international, open-label, randomised, phase 3 superiority trial that enrolled women aged 18 years or older with newly diagnosed, early-stage breast cancer who had a definite indication for chemotherapy, any nodal status, any hormone receptor status, Eastern Cooperative Oncology Group performance status of 0-1, and adequate bone marrow, hepatic, and renal function. Women were recruited from 127 clinical centres and hospitals in the UK and Ireland, and randomly assigned (1:1) to one of two treatment regimens: epirubicin, cyclophosphamide, and paclitaxel (four cycles of 90 mg/m2 intravenously administered epirubicin and 600 mg/m2 intravenously administered cyclophosphamide on day 1 every 3 weeks, followed by four cycles of 175 mg/m2 paclitaxel as a 3 h infusion on day 1 every 3 weeks) or epirubicin, cyclophosphamide, and paclitaxel plus gemcitabine (the same chemotherapy regimen as the other group, with the addition of 1250 mg/m2 gemcitabine to the paclitaxel cycles, administered intravenously as a 0·5 h infusion on days 1 and 8 every 3 weeks). Patients were randomly assigned by a central computerised deterministic minimisation procedure, with stratification by country, age, radiotherapy intent, nodal status, and oestrogen receptor and HER-2 status. The primary endpoint was disease-free survival and the trial aimed to detect 5% differences in 5-year disease-free survival between the treatment groups. Recruitment completed in 2004 and this is the final, intention-to-treat analysis. This trial is registered with EudraCT (2004-002927-41), ISRCTN (51146252), and ClinicalTrials.gov (NCT00039546). FINDINGS: Between Aug 22, 2001, and Nov 26, 2004, 3152 patients were enrolled and randomly assigned to epirubicin, cyclophosphamide, paclitaxel, and gemcitabine (gemcitabine group; n=1576) or to epirubicin, cyclophosphamide, and paclitaxel (control group; n=1576). 11 patients (six in the gemcitabine group and five in the control group) were ineligible because of pre-existing metastases and were therefore excluded from the analysis. At this protocol-specified final analysis (median follow-up 10 years [IQR 10-10]), 1087 disease-free survival events and 914 deaths had occurred. Disease-free survival did not differ significantly between the treatment groups at 10 years (65% [63-68] in the gemcitabine group vs 65% [62-67] in the control group), and median disease-free survival was not reached (adjusted hazard ratio 0·97 [95% CI 0·86-1·10], p=0·64). Toxicity, dose intensity, and a detailed safety substudy showed both regimens to be safe, deliverable, and tolerable. Grade 3 and 4 toxicities were reported at expected levels in both groups. The most common were neutropenia (527 [34%] of 1565 patients in the gemcitabine group vs 412 [26%] of 1567 in the control group), myalgia and arthralgia (207 [13%] vs 186 [12%]), fatigue (207 [13%] vs 152 [10%]), infection (202 [13%] vs 141 [9%]), vomiting (143 [9%] vs 108 [7%]), and nausea (132 [8%] vs 102 [7%]). INTERPRETATION: The addition of gemcitabine to anthracycline and taxane-based adjuvant chemotherapy at this dose and schedule confers no therapeutic advantage in terms of disease-free survival in early breast cancer, although it can cause increased toxicity. Therefore, gemcitabine has not been added to standard adjuvant chemotherapy in breast cancer for any subgroup. FUNDING: Cancer Research UK core funding for Clinical Trials Unit at the University of Birmingham, Eli Lilly, Bristol-Myers Squibb, and Pfizer.

Hes1 desynchronizes differentiation of pluripotent cells by modulating STAT3 activity.

Robust development of the early embryo may benefit from mechanisms that ensure that not all pluripotent cells differentiate at exactly the same time: such mechanisms would build flexibility into the process of lineage allocation. This idea is supported by the observation that pluripotent stem cells differentiate at different rates in vitro. We use a clonal commitment assay to confirm that pluripotent cells commit to differentiate asynchronously even under uniform differentiation conditions. Stochastic variability in expression of the Notch target gene Hes1 has previously been reported to influence neural versus mesodermal differentiation through modulation of Notch activity. Here we report that Hes1 also has an earlier role to delay exit from the pluripotent state into all lineages. The early function of Hes1 to delay differentiation can be explained by an ability of Hes1 to amplify STAT3 responsiveness in a cell-autonomous manner. Variability in Hes1 expression therefore helps to explain why STAT3 responsiveness varies between individual ES cells, and this in turn helps to explain why pluripotent cells commit to differentiate asynchronously.

Free radical functionalization of surfaces to prevent adverse responses to biomedical devices.

Immobilizing a protein, that is fully compatible with the patient, on the surface of a biomedical device should make it possible to avoid adverse responses such as inflammation, rejection, or excessive fibrosis. A surface that strongly binds and does not denature the compatible protein is required. Hydrophilic surfaces do not induce denaturation of immobilized protein but exhibit a low binding affinity for protein. Here, we describe an energetic ion-assisted plasma process that can make any surface hydrophilic and at the same time enable it to covalently immobilize functional biological molecules. We show that the modification creates free radicals that migrate to the surface from a reservoir beneath. When they reach the surface, the radicals form covalent bonds with biomolecules. The kinetics and number densities of protein molecules in solution and free radicals in the reservoir control the time required to form a full protein monolayer that is covalently bound. The shelf life of the covalent binding capability is governed by the initial density of free radicals and the depth of the reservoir. We show that the high reactivity of the radicals renders the binding universal across all biological macromolecules. Because the free radical reservoir can be created on any solid material, this approach can be used in medical applications ranging from cardiovascular stents to heart-lung machines.

REDV-Functionalized Recombinant Spider Silk for Next-Generation Coronary Artery Stent Coatings: Hemocompatible, Drug-Eluting, and Endothelial Cell-Specific Materials.

Coronary artery stents are life-saving devices, and millions of these devices are implanted annually to treat coronary heart disease. The current gold standard in treatment is drug-eluting stents, which are coated with a biodegradable polymer layer that elutes antiproliferative drugs to prevent restenosis due to neointimal hyperplasia. Stenting is commonly paired with systemic antiplatelet therapy to prevent stent thrombosis. Despite their clinical success, current stents have significant limitations including inducing local inflammation that drives hyperplasia; a lack of hemocompatibility that promotes thrombosis, increasing need for antiplatelet therapy; and limited endothelialization, which is a critical step in the healing process. In this research, we designed a novel material for use as a next-generation coating for drug-eluting stents that addresses the limitations described above. Specifically, we developed a recombinant spider silk material that is functionalized with an REDV cell-adhesive ligand, a peptide motif that promotes specific adhesion of endothelial cells in the cardiovascular environment. We illustrated that this REDV-modified spider silk variant [eADF4(C16)-REDV] is an endothelial-cell-specific material that can promote the formation of a near-confluent endothelium. We additionally performed hemocompatibility assays using human whole blood and demonstrated that spider silk materials exhibit excellent hemocompatibility under both static and flow conditions. Furthermore, we showed that the material displayed slow enzyme-mediated degradation. Finally, we illustrated the ability to load and release the clinically relevant drug everolimus from recombinant spider silk coatings in a quantity and at a rate similar to that of commercial devices. These results support the use of REDV-functionalized recombinant spider silk as a coating for drug-eluting stents.

Platelet Adhesion and Activation in an ECMO Thrombosis-on-a-Chip Model.

Use of extracorporeal membrane oxygenation (ECMO) for cardiorespiratory failure remains complicated by blood clot formation (thrombosis), triggered by biomaterial surfaces and flow conditions. Thrombosis may result in ECMO circuit changes, cause red blood cell hemolysis, and thromboembolic events. Medical device thrombosis is potentiated by the interplay between biomaterial properties, hemodynamic flow conditions and patient pathology, however, the contribution and importance of these factors are poorly understood because many in vitro models lack the capability to customize material and flow conditions to investigate thrombosis under clinically relevant medical device conditions. Therefore, an ECMO thrombosis-on-a-chip model is developed that enables highly customizable biomaterial and flow combinations to evaluate ECMO thrombosis in real-time with low blood volume. It is observed that low flow rates, decelerating conditions, and flow stasis significantly increased platelet adhesion, correlating with clinical thrombus formation. For the first time, it is found that tubing material, polyvinyl chloride, caused increased platelet P-selectin activation compared to connector material, polycarbonate. This ECMO thrombosis-on-a-chip model can be used to guide ECMO operation, inform medical device design, investigate embolism, occlusion and platelet activation mechanisms, and develop anti-thrombotic biomaterials to ultimately reduce medical device thrombosis, anti-thrombotic drug use and therefore bleeding complications, leading to safer blood-contacting medical devices.

Visualizing a Nanoscale Lubricant Layer under Blood Flow.

Tethered-liquid perfluorocarbons (TLPs) are a class of liquid-infused surfaces with the ability to reduce blood clot formation (thrombosis) on blood-contacting medical devices. TLP comprises a tethered perfluorocarbon (TP) infused with a liquid perfluorocarbon (LP); this LP must be retained to maintain the antithrombotic properties of the layer. However, the stability of the LP layer remains in question, particularly for medical devices under blood flow. In this study, the lubricant thickness is spatially mapped and quantified in situ through confocal dual-wavelength reflection interference contrast microscopy. TLP coatings prepared on glass substrates are exposed to the flow of 37% glycerol/water mixtures (v/v) or whole blood at a shear strain rate of around 2900 s-1 to mimic physiological conditions (similar to flow conditions found in coronary arteries). Excess lubricant (>2 µm film thickness) is removed upon commencement of flow. For untreated glass, the lubricant is completely depleted after 1 min of shear flow. However, on optimized TLP surfaces, nanoscale films of lubricants (thickness between 100 nm and 2 µm) are retained over many tens of minutes of flow. The nanoscale films conform to the underlying structure of the TP layer and are sufficient to prevent the adhesion of red blood cells and platelets.

Mechanisms for Reduced Fibrin Clot Formation on Liquid-Infused Surfaces.

Biomedical devices are prone to blood clot formation (thrombosis), and liquid-infused surfaces (LIS) are effective in reducing the thrombotic response. However, the mechanisms that underpin this performance, and in particular the role of the lubricant, are not well understood. In this work, it is investigated whether the mechanism of LIS action is related to i) inhibition of factor XII (FXII) activation and the contact pathway; ii) reduced fibrin density of clots formed on surfaces; iii) increased mobility of proteins or cells on the surface due to the interfacial flow of the lubricant. The chosen LIS is covalently tethered, nanostructured layers of perfluorocarbons, infused with thin films of medical-grade perfluorodecalin (tethered-liquid perfluorocarbon), prepared with chemical vapor deposition previously optimized to retain lubricant under flow. Results show that in the absence of external flow, interfacial mobility is inherently higher at the liquid-blood interface, making it a key contributor to the low thrombogenicity of LIS, as FXII activity and fibrin density are equivalent at the interface. The findings of this study advance the understanding of the anti-thrombotic behavior of LIS-coated biomedical devices for future coating design. More broadly, enhanced interfacial mobility may be an important, underexplored mechanism for the anti-fouling behavior of surface coatings.

Biochemical and Hematologic Reference Intervals for Anesthetized, Female, Juvenile Yorkshire Swine.

Swine are widely used in biomedical research, translational research, xenotransplantation, and agriculture. For these uses, physiologic reference intervals are extremely important for assessing the health status of the swine and diagnosing disease. However, few biochemical and hematologic reference intervals that comply with guidelines from the Clinical and Laboratory Standards Institute and the American Society for Veterinary Clinical Pathology are available for swine. These guidelines state that reference intervals should be determined by using 120 subjects or more. The aim of this study was to generate hematologic and biochemical reference intervals for female, juvenile Yorkshire swine (Sus scrofa domesticus) and to compare these values with those for humans and baboons (Papio hamadryas). Blood samples were collected from the femoral artery or vein of female, juvenile Yorkshire swine, and standard hematologic and biochemical parameters were analyzed in multiple studies. Hematologic and biochemical reference intervals were calculated for arterial blood samples from Yorkshire swine (n = 121 to 124); human and baboon reference intervals were obtained from the literature. Arterial reference intervals for Yorkshire swine differed significantly from those for humans and baboons in all commonly measured parameters except platelet count, which did not differ significantly from the human value, and glucose, which was not significantly different from the baboon value. These data provide valuable information for investigators using female, juvenile Yorkshire swine for biomedical re- search, as disease models, and in xenotransplantation studies as well as useful physiologic information for veterinarians and livestock producers. Our findings highlight the need for caution when comparing data and study outcomes between species.

Rapid Regeneration of a Neoartery with Elastic Lamellae.

Native arteries contain a distinctive intima-media composed of organized elastin and an adventitia containing mature collagen fibrils. In contrast, implanted biodegradable small-diameter vascular grafts do not present spatially regenerated, organized elastin. The elastin-containing structures within the intima-media region encompass the elastic lamellae (EL) and internal elastic lamina (IEL) and are crucial for normal arterial function. Here, the development of a novel electrospun small-diameter vascular graft that facilitates de novo formation of a structurally appropriate elastin-containing intima-media region following implantation is described. The graft comprises a non-porous microstructure characterized by tropoelastin fibers that are embedded in a PGS matrix. After implantation in mouse abdominal aorta, the graft develops distinct cell and extracellular matrix profiles that approximate the native adventitia and intima-media by 8 weeks. Within the newly formed intima-media region there are circumferentially aligned smooth muscle cell layers that alternate with multiple EL similar to that found in the arterial wall. By 8 months, the developed adventitia region contains mature collagen fibrils and the neoartery presents a distinct IEL with thickness comparable to that in mouse abdominal aorta. It is proposed that this new class of material can generate the critically required, organized elastin needed for arterial regeneration.

Stability of a therapeutic layer of immobilized recombinant human tropoelastin on a plasma-activated coated surface.

PURPOSE: To modify blood-contacting stainless surfaces by covalently coating them with a serum-protease resistant form of tropoelastin (TE). To demonstrate that the modified TE retains an exposed, cell-adhesive C-terminus that persists in the presence of blood plasma proteases. METHODS: Recombinant human TE and a point mutant variant (R515A) of TE were labeled with (125)Iodine and immobilized on plasma-activated stainless steel (PAC) surfaces. Covalent attachment was confirmed using rigorous detergent washing. As kallikrein and thrombin dominate the serum degradation of tropoelastin, supraphysiological levels of these proteases were incubated with covalently bound TE and R515A, then assayed for protein levels by radioactivity detection. Persistence of the C-terminus was assessed by ELISA. RESULTS: TE was significantly retained covalently on PAC surfaces at 88 ± 5% and 71 ± 5% after treatment with kallikrein and thrombin, respectively. Retention of R515A was 100 ± 1.3% and 87 ± 2.3% after treatment with kallikrein and thrombin, respectively, representing significant improvements over TE. The functionally important C-terminus was cleaved in wild-type TE but retained by R515A. CONCLUSIONS: Protein persists in the presence of human kallikrein and thrombin when covalently immobilized on metal substrata. R515A displays enhanced protease resistance and retains the C-terminus presenting a protein interface that is viable for blood-contacting applications.

Elastin-based materials.

Elastin is a versatile elastic protein that dominates flexible tissues capable of recoil, and facilitates commensurate cell interactions in these tissues in all higher vertebrates. Elastin's persistence and insolubility hampered early efforts to construct versatile biomaterials. Subsequently the field has progressed substantially through the adapted use of solubilized elastin, elastin-based peptides and the increasing availability of recombinant forms of the natural soluble elastin precursor, tropoelastin. These interactions allow for the formation of a sophisticated range of biomaterial constructs and composites that benefit from elastin's physical properties of innate assembly and elasticity, and cell interactive properties as discussed in this tutorial review.

Biomaterial Wettability Affects Fibrin Clot Structure and Fibrinolysis.

Thrombosis on blood-contacting medical devices can cause patient fatalities through device failure and unstable thrombi causing embolism. The effect of material wettability on fibrin network formation, structure, and stability is poorly understood. Under static conditions, fibrin fiber network volume and density increase in clots formed on hydrophilic compared to hydrophobic polystyrene surfaces. This correlates with reduced plasma clotting time and increased factor XIIa (FXIIa) activity. These structural differences are consistent up to 50 µm away from the material surface and are FXIIa dependent. Fibrin forms fibers immediately at the material interface on hydrophilic surfaces but are incompletely formed in the first 5 µm above hydrophobic surfaces. Additionally, fibrin clots on hydrophobic surfaces have increased susceptibility to fibrinolysis compared to clots formed on hydrophilic surfaces. Under low-flow conditions, clots are still denser on hydrophilic surfaces, but only 5 µm above the surface, showing the combined effect of the surface wettability and coagulation factor dilution with low flow. Overall, wettability affects fibrin fiber formation at material interfaces, which leads to differences in bulk fibrin clot density and susceptibility to fibrinolysis. These findings have implications for thrombus formed in stagnant or low-flow regions of medical devices and the design of nonthrombogenic materials.

Biomimetic silk biomaterials: Perlecan-functionalized silk fibroin for use in blood-contacting devices.

Blood compatible materials are required for the development of therapeutic and diagnostic blood contacting devices as blood-material interactions are a key factor dictating device functionality. In this work, we explored biofunctionalization of silk biomaterials with a recombinantly expressed domain V of the human basement membrane proteoglycan perlecan (rDV) towards the development of blood compatible surfaces. Perlecan and rDV are of interest in vascular device development as they uniquely support endothelial cell, while inhibiting smooth muscle cell and platelet interactions. rDV was covalently immobilized on silk biomaterials using plasma immersion ion implantation (PIII), a new method of immobilizing proteins on silk biomaterials that does not rely on modification of specific amino acids in the silk protein chain, and compared to physisorbed and carbodiimide immobilized rDV. Untreated and treated silk biomaterials were examined for interactions with blood components with varying degrees of complexity, including isolated platelets, platelet rich plasma, blood plasma, and whole blood, both under agitated and flow conditions. rDV-biofunctionalized silk biomaterials were shown to be blood compatible in terms of platelet and whole blood interactions and the PIII treatment was shown to be an effective and efficient means of covalently immobilizing rDV in its bioactive form. These biomimetic silk biomaterials are a promising platform toward development of silk-based blood-contacting devices for therapeutic, diagnostic, and research applications. STATEMENT OF SIGNIFICANCE: Blood compatible materials are required for the development of therapeutic and diagnostic blood contacting devices as blood-material interactions are a key factor dictating device functionality. In this work, we explored biofunctionalization of silk biomaterials with a recombinantly expressed domain V (rDV) of the human basement membrane proteoglycan perlecan towards the development of blood compatible surfaces. Perlecan and rDV are of interest in vascular device development as they uniquely support endothelial cell, while inhibiting smooth muscle cell and platelet interactions. rDV was covalently immobilized on silk biomaterials using plasma immersion ion implantation (PIII), a new method of immobilizing proteins on silk biomaterials that does not rely on modification of specific amino acids in the silk protein chain. These biomimetic silk biomaterials are a promising platform toward development of silk-based blood-contacting devices for therapeutic, diagnostic, and research applications.

Evaluating medical device and material thrombosis under flow: current and emerging technologies.

Although blood-contacting medical devices are used widely, blood clot formation (thrombosis) leads to device failure and potentially catastrophic adverse thrombotic events for patients, such as stroke or pulomonary embolism. Systemic anti-thrombotic drugs aimed at reducing these complications do not always prevent device thrombosis and can cause increased bleeding risks. Therefore, our understanding of material thrombosis mechanisms needs to be improved in order to develop next generation blood-contacting medical devices and materials. Medical device development requires material thrombogenicity evaluation according to the International Standards 10993-4 Biological evaluation of medical devices-Selection of tests for interactions with blood, which highlights that one of the key aspects for testing is a clinically relevant flow system. In this review, we first provide an overview of the current knowledge regarding material thrombosis and important physical and biological aspects of blood flow in relation to thrombus formation. We then examine commonly used in vitro flow systems to evaluate material and medical device thrombosis, focusing on their capabilities, advantages and disadvantages. Finally, we explore recent advances in technology that will aid in improving the design and fabrication of flow systems, mechanistic analysis and computational modelling.

Clinical Potential of Immobilized Liquid Interfaces: Perspectives on Biological Interactions.

Immobilized liquid (IL) surface coatings are an emerging technology that provide to materials the ability to repel complex biological fluids and hold promise in medical applications to prevent biological fouling, especially in the context of preventing medical device-induced thrombosis, fibrosis, and biofilm formation. However, little is known about the biological interactions of the IL with proteins and cells, and an increased understanding is critical for optimal device application, function, and successful clinical translation. Here, we review existing clinical and biological knowledge of the liquids used in these surface coatings, recent developments in understanding the biological interactions of IL coatings, and future directions and challenges for the clinical translation of this new class of IL surface coatings.