Structure Property Relationship of Micellar Waterborne Poly(Urethane-Urea): Tunable Mechanical Properties and Controlled Release Profiles with Amphiphilic Triblock Copolymers.

Waterborne polyurethane (WPU) has attracted significant interest as a promising alternative to solvent-based polyurethane (SPU) due to its positive impact on safety and sustainability. However, significant limitations of WPU, such as its weaker mechanical strength, limit its ability to replace SPU. Triblock amphiphilic diols are promising materials to enhance the performance of WPU due to their well-defined hydrophobic-hydrophilic structures. Yet, our understanding of the relationship between the hydrophobic-hydrophilic arrangements of triblock amphiphilic diols and the physical properties of WPU remains limited. In this study, we show that by controlling the micellar structure of WPU in aqueous solution via the introduction of triblock amphiphilic diols, the postcuring efficiency and the resulting mechanical strength of WPU can be significantly enhanced. Small-angle neutron scattering confirmed the microstructure and spatial distribution of hydrophilic and hydrophobic segments in the engineered WPU micelles. In addition, we show that the control of the WPU micellar structure through triblock amphiphilic diols renders WPU attractive in the applications of controlled release, such as drug delivery. Here, curcumin was used as a model hydrophobic drug, and the drug release behavior from WPU-micellar-based drug delivery systems was characterized. It was found that curcumin-loaded WPU drug delivery systems were highly biocompatible and exhibited antibacterial properties in vitro. Furthermore, the sustained release profile of the drug was found to be dependent on the structure of the triblock amphiphilic diols, suggesting the possibility of controlling the drug release profile via the selection of triblock amphiphilic diols. This work shows that by shedding light on the structure-property relationship of triblock amphiphilic diol-containing WPU micelles, we may enhance the applicability of WPU systems and move closer to realizing their promising potential in real-life applications.

Synthesis and Characterization of Size-Controlled Titania Nanorods through Double Surfactants.

A synthetic technique based on a two-step sol-gel hydrothermal method using cetyltrimethylammonium bromide (CTAB) and triblock copolymer PEO106-PPO70-PEO106 (F127) as double surfactants with the assistance of three amines (ethylamine (EA), diethylamine (DEA), and triethylamine (TEA)) for fabrications of anatase titania nanorods is proposed. The formation and growth mechanisms of TiO2 crystals are described. We discovered that crystal size reduces with an increase in the number of alkyl substituents on the nitrogen of amines because the steric hindrance of the bulky alkyl substituent around nitrogen suppresses the nucleation and crystal growth rate. The size of titania from 80 to 220 nm is modulated with concentrations of EA, DEA, and TEA. The amines are considered as catalysts for morphological evolution of TiO2 crystals. The results indicate that the incorporation of double surfactants (F127-CTAB) has a dual role, acting as a chelating agent for titania against external forces and a capping agent inhibiting the three-dimensional growth of TiO2 crystals.

Development of Self-Healable Organic/Inorganic Hybrid Materials Containing a Biobased Copolymer via Diels-Alder Chemistry and Their Application in Electromagnetic Interference Shielding.

In this study, a novel biobased poly(ethylene brassylate)-poly(furfuryl glycidyl ether) copolymer (PEBF) copolymer was synthesized and applied as a structure-directing template to incorporate graphene and 1,1'-(methylenedi-4,1-phenylene)bismaleimide (BMI) to fabricate a series of self-healing organic/inorganic hybrid materials. This ternary material system provided different types of diene/dienophile pairs from the furan/maleimide, graphene/furan, and graphene/maleimide combinations to build a crosslinked network via multiple Diels-Alder (DA) reactions and synergistically co-assembled graphene sheets into the polymeric matrix with a uniform dispersibility. The PEBF/graphene/BMI hybrid system possessed an efficient self-repairability for healing structural defects and an electromagnetic interference shielding ability in the Ku-band frequency range. We believe that the development of the biobased self-healing hybrid system provides a promising direction for the creation of a new class of materials with the advantages of environmental friendliness as well as durability, and shows potential for use in advanced electromagnetic applications.

Synthesis and Characterization of pH and Thermo Dual-Responsive Hydrogels with a Semi-IPN Structure Based on N-Isopropylacrylamide and Itaconamic Acid.

A series of semi-interpenetrating polymer network (semi-IPN) hydrogels were synthesized and investigated in this study. Linear copolymer poly(N-isopropylacrylamide-co-itaconamic acid) p(NIPAM-co-IAM), which is formed by copolymerization of N-isopropylacrylamide (NIPAM) and itaconamic acid (IAM, 4-amino-2-ethylene-4-oxobutanoic acid), was introduced into a solution of NIPAM to form a series of pH and thermo dual-responsive p(NIPAM-co-IAM)/pNIPAM semi-IPN hydrogels by free radical polymerization. The structural, morphological, chemical, and physical properties of the linear copolymer and semi-IPN hydrogels were investigated. The semi-IPN hydrogel showed high thermal stability according to thermal gravimetric analyzer (TGA). Scanning electronic microscopy (SEM) images showed that the pore size was in the range of 119~297 µm and could be controlled by the addition ratio of the linear copolymer in the semi-IPN structure. The addition of linear copolymer increased the fracture strain from 57.5 ± 2.9% to 91.1 ± 4.9% depending on the added amount, while the compressive modulus decreased as the addition increased. Moreover, the pH and thermo dual-responsive properties were investigated using differential scanning calorimetry (DSC) and monitoring the swelling behavior of the hydrogels. In deionized (DI) water, the equilibrium swelling ratio of the hydrogels decreased as the temperature increased from 20 °C to 50 °C, while it varied in various pH buffer solutions. In addition, the swelling and deswelling rates of the hydrogels also significantly increased. The results indicate that the novel pH-thermo dual-responsive semi-IPN hydrogels were synthesized successfully and may be a potential material for biomedical, drug delivery, or absorption application.

Study of theThermo-/pH-Sensitivity of Stereo-Controlled Poly(N-isopropylacrylamide-co-IAM) Copolymers via RAFT Polymerization.

In this work, a smart copolymer, Poly(nipam-co-IAM) was synthesized by copolymerization of N-isopropylacrylamide (nipam) and itaconamic acid (IAM) through reversible addition-fragmentation chain-transfer (RAFT) polymerization. Poly(nipam-co-IAM) has been studied previously synthesized via radical polymerization without stereo-control, and this work used cumyl dithiobenzoate and Ytterbium(III) trifluoromethanesulfonate as RAFT and stereo-control agents, respectively. The stereo-control result in this work shows that tacticity affects the lower critical solution temperature (LCST) and/or the profile of phase separation of Poly(nipam-co-IAM). In the pH 7 and pH 10 buffer solutions, the P(nipam-co-IAM) copolymer solutions showed soluble⁻insoluble⁻soluble transitions, i.e., both LCST and upper critical solution temperature (UCST) transitions, which had not been found previously, and the insoluble to soluble transition (redissolved behavior) occurred at a relatively low temperature. The insoluble to soluble transition of P(nipam-co-IAM) in alkaline solution occurred at a temperature of less than 45 °C. However, the redissolved behavior of P(nipam-co-IAM) was found only in the pH 7 and pH 10 buffer solutions and this redissolved behavior was more prominent for the atactic copolymers than in the isotactic-rich ones. In addition, the LCST results under our experimental range of meso content did not show a significant difference between the isotactic-rich and the atactic P(nipam-co-IAM). Further study on the soluble-insoluble-soluble (S-I-S) transition and the application thereof for P(nipam-co-IAM) copolymers will be conducted.

Synthesis and Drug Delivery Application of Thermo- and pH-Sensitive Hydrogels: Poly(ß-CD-co-N-Isopropylacrylamide-co-IAM).

Copolymerization of N-isopropylacrylamide (NIPAM), itaconamic acid (IAM; 4-amino-2-methylene-4-oxobutanoic acid) and ß-cyclodextrin was investigated in this study. ß-cyclodextrin was at first modified by reacting with allyl glycidyl ether to substitute its OH end groups with moieties containing double bonds to facilitate the subsequent radical copolymerization with NIPAM and IAM. It was reported that poly(NIPAM-IAM) can respond to the change of temperature as well as pH value. In this study, the structure of ß-cyclodextrin was introduced to poly(NIPAM-IAM) copolymers because of its cavity structure capable of encapsulating a variety of drug molecules. The tri-component copolymers, poly(CD-NIPAM-IAM), were synthesized with different monomeric ratios of NIPAM/IAM/ß-CD and the hydrogels of the tri-component copolymers were also synthesized by additionally adding N,N'-methylenebisacrylamide as a cross-linking agent. The results show that the lower critical solution temperature (LCST) of the copolymer (or hydrogel) increases as the molar fraction of IAM increases. The transmission electron microscopic (TEM) images of linear copolymers (no cross-linking) show that molecules undergo self-assembly to have a distinct core-shell structure, compared to poly(CD-NIPAM) which contains no IAM. On the other hand, the scanning electron microscopic (SEM) images of hydrogels show that the pores gradually become sheet-like structures as the molar fraction of IAM increases to enhance the water absorption capacity. In order to exhibit the thermal and pH sensitivities of poly(CD-NIPAM-IAM) as the drug carrier, the drug release of the newly synthesized hydrogels at 37 °C and different pH values, pH = 2 and pH = 7.4, was investigated using atorvastatin which was used primarily as a lipid-lowering drug. The drug release experimental result shows that poly(CD-NIPAM-IAM) as a drug carrier was pH-sensitive and has the largest release rate at pH = 7.4 at 37 °C, indicating it is useful to release drugs in a neutral or alkaline (intestinal) environment.