Ligand Meta-Anchoring Strategy in Metal-Organic Frameworks for Remarkable Promotion of Quantum Yields.

Aggregation is a conventional method to enhance the quantum yields (QYs) of pure organic luminophores due to the restriction of intramolecular motions (RIM). However, how to realize RIM in metal-organic frameworks (MOFs) is still unclear and challenging. In this work, the ligand meta-anchoring strategy is first proposed and proved to be an effective and systematic approach to restrict the intramolecular motions of MOFs for the QY improvement. By simply shifting the substituent position in the ligand from para to meta, the QY of the resulting MOF is significantly enhanced by eleven-fold. The value is even higher than that of ligand aggregates, demonstrating the strong RIM effect of this ligand meta-anchoring strategy. The introduction of co-ligand induces the appearance of visible yellow room temperature phosphorescence with a lifetime of 222 ms due to the QY enhancement and the charge transfer between the donor and accepter units. The present work thus broadens the understanding of the RIM mechanism from a new perspective, develops a novel method to realize RIM and expands the applicable objects from pure organic materials to organic-inorganic hybrid materials.

Investigation of photoelectron elliptical dichroism for chiral analysis.

This paper describes a compact new instrument, conceived specifically for measurements of Photo Electron Elliptical Dichroism (PEELD) and designed for simplicity of use as a prototype for a practical analytical device. PEELD is an asymmetry in the electron angular distribution obtained from resonantly enhanced multi-photon ionisation of a chiral molecule, where there is also a non-linear dependence on the polarization ellipticity. Despite the fact that PEELD can provide a unique signature of molecular structure and dynamics it has only been investigated in a few molecules to date. This is addressed in the present study in a range of measurements of several terpenes and phenyl-alcohols. These show that the PEELD signatures in structural isomers can be dramatically different and can also be influenced by the intensity of the light. A systematic study in phenyl-alcohols containing the same chromophore and chiral centre configuration shows consistent PEELD behaviour across the molecules except that the magnitude reduces as the distance from the chromophore to the chiral centre increases. These achievements demonstrate that this relatively simple set up can be used for scientific studies as well as providing a blueprint for a practical chiral analysis instrument.

Rashba Band Splitting and Bulk Photovoltaic Effect Induced by Halogen Bonds in Hybrid Layered Perovskites.

Non-covalent interactions play an essential role in directing the self-assembly of hybrid organic-inorganic crystals. In hybrid halide perovskites, hydrogen bonding has been the paramount non-covalent interaction. Here, we show another non-covalent interaction, namely, the halogen bond interaction, that directs a symmetry-breaking assembly in a new series of two-dimensional (2D) perovskites (ICH2 CH2 NH3 )2 (CH3 NH3 )n-1 Pbn I3n+1 (n is the layer thickness, n=1-4). Structural analysis shows that the halogen bond strength varies with the layer thickness. For the odd number (n=1, 3) layered perovskites, stronger halogen interaction leads to centrosymmetric structures, whereas for the n=2 layered perovskites, weaker halogen bonds result in non-centrosymmetric structures. Transient reflection spectroscopy shows a suppressed radiative recombination rate (k2 ≈0) and prolonged spin lifetime for n=2 structure, suggesting an enhanced Rashba band splitting effect. The structural asymmetry is further confirmed with a reversible bulk photovoltaic effect. Our work provides a new design strategy to enable hybrid perovskites with emerging properties and functionalities associated with structural asymmetry.

[2+2+1+1] Cycloaddition for de novo Synthesis of Densely Functionalized Phenols.

A unique benzannulation strategy for regioselective de novo synthesis of densely functionalized phenols is described. Through metal-mediated formal [2+2+1+1] cycloaddition of two different alkynes and two molecules of CO, a series of densely functionalized phenols were obtained. The benzannulation strategy allows efficient regioselective installation up to five different substituents on a phenol ring. The resulting phenols have a substitution pattern different from those obtained from Dötz and Danheiser benzannulations.

Alkyne Metathesis with d2 Re(V) Alkylidyne Complexes Supported by Phosphino-Phenolates: Ligand Effect on Catalytic Activity and Applications in Ring-Closing Alkyne Metathesis.

A family of d2 Re(V) alkylidyne complexes bearing two decorated phosphino-phenolates (POs) and a labile pyridine ligand were prepared that can efficiently promote alkyne metathesis reactions in toluene. The relative activity of these complexes varies with the PO ligands. Complexes with an electron-rich metal center have a higher activity. Ligand exchange experiments suggest that the pyridine ligands of the Re(V) alkylidynes with more electron-donating PO ligands are more labile and are more easily released to generate catalytically active species. However, complexes with electron-withdrawing PO ligands are more air-stable than those with electron-donating PO ligands. These Re(V) alkylidyne catalysts can promote the homometathesis of functionalized internal alkyl- and aryl-alkynes, as well as ring-closing alkyne metathesis (RCAM) of methyl-capped diynes, forming macrocycles with a ring size ≥12 efficiently for concentrations ≤5 mM. These reactions represent the first examples of RCAM mediated by non-d0 alkylidyne complexes. The Re(V) alkylidyne catalysts tolerate a wide range of functional groups including ethers, esters, ketones, aldehydes, alcohols, phenols, amines, amides, and heterocycles. Moreover, the catalytic RCAM reactions promoted by robust Re(V) alkylidyne catalysts could also proceed normally in wet toluene.

Revealing the Intrinsic Chiroptical Activity in Chiral Metal-Halide Semiconductors.

The combination of chirality and semiconducting properties has enabled chiral metal-halide semiconductors (MHS) to be promising candidates for spin- and polarization-resolved optoelectronic devices. Although several chiral MHS with rich chemical and structural diversity have been reported lately, the macroscopic origin of chiroptical activity remains elusive. Here, combining spectroscopic measurements and Mueller matrix analysis, we discover that the previously reported "apparent" anisotropy factor measured from circular dichroism (CD) in chiral MHS thin films is not an intrinsic chiroptical property, but rather, arising from an interference between the film's linear birefringence (LB) and linear dichroism (LD). We verify the presence of LB and LD effects in both one-dimensional and zero-dimensional chiral MHS thin films. We establish spectroscopic methods to decouple the genuine CD from other spurious contributions, which allows a quantitative comparison of the intrinsic chiroptical activity across different chiral MHS. The relationship between the structure and the genuine chiroptical activity is then uncovered, which is well described by the chirality-induced spin-orbit coupling in the chiral structures. Our study unveils the macroscopic origin of chiroptical activity of chiral MHS and provides design principles for obtaining high anisotropic factors for future chiral optoelectronic applications.

Organic Long-Persistent Luminescence from a Single-Component Aggregate.

Long-persistent luminescence (LPL), also known as afterglow, is a phenomenon in which the material shows long-lasting luminescence after the cessation of the excitation source. The research of LPL continues to attract much interest due to its fundamental nature and its potential in the development of the next generation of functional materials. However, most of the current LPL materials are multicomponent inorganic systems obtained after harsh synthetic procedures and often use rare-earth metals. Recently, metal free organic long-persistent luminescence (OLPL) has gained much interest because it can bypass many of the disadvantages of inorganic systems. To date, the most successful method to generate OLPL systems is to access charge-separated states through binary donor-acceptor exciplex systems. However, it has been reported that the ratios of the binary systems affect OLPL properties, complicating the reproducibility and large-scale production of OLPL materials. Simpler OLPL systems can overcome these issues for the benefit of the development and adoption of OLPL systems. Here, we report on the rational design and synthesis of a single-component OLPL system with detectable afterglow for at least 12 min under ambient conditions. This work exemplifies an easy design principle for new OLPL materials. The investigation of the material provides valuable insights toward the generation of OLPL from a single-component system.

Rational Design of NIR-II AIEgens with Ultrahigh Quantum Yields for Photo- and Chemiluminescence Imaging.

Fluorescence imaging in the second near-infrared window (NIR-II, 1000-1700 nm) using small-molecule dyes has high potential for clinical use. However, many NIR-II dyes suffer from the emission quenching effect and extremely low quantum yields (QYs) in the practical usage forms. The AIE strategy has been successfully utilized to develop NIR-II dyes with donor-acceptor (D-A) structures with acceptable QYs in the aggregate state, but there is still large room for QY improvement. Here, we rationally designed a NIR-II emissive dye named TPE-BBT and its derivative (TPEO-BBT) by changing the electron-donating triphenylamine unit to tetraphenylethylene (TPE). Their nanoparticles exhibited ultrahigh relative QYs of 31.5% and 23.9% in water, respectively. By using an integrating sphere, the absolute QY of TPE-BBT nanoparticles was measured to be 1.8% in water. Its crystals showed an absolute QY of 10.4%, which is the highest value among organic small molecules reported so far. The optimized D-A interaction and the higher rigidity of TPE-BBT in the aggregate state are believed to be the two key factors for its ultrahigh QY. Finally, we utilized TPE-BBT for NIR-II photoluminescence (PL) and chemiluminescence (CL) bioimaging through successive CL resonance energy transfer and Förster resonance energy transfer processes. The ultrahigh QY of TPE-BBT realized an excellent PL imaging quality in mouse blood vessels and an excellent CL imaging quality in the local arthrosis inflammation in mice with a high signal-to-background ratio of 130. Thus, the design strategy presented here brings new possibilities for the development of bright NIR-II dyes and NIR-II bioimaging technologies.

Highly Stable Tetrahydrothiophene 1-Oxide Caged Copper Bromide and Chloride Clusters with Deep-Red to Near-IR Emission.

All-inorganic copper(I)-based metal halides have emerged as promising candidates for the replacement of lead perovskites because of their outstanding optical properties. However, the limited structure tunability prohibits their further exploration of properties including red photoluminescence (PL). Here, we report a series of red-emissive lead-free hybrid organic-inorganic copper halides A6(C4H8OS)12[Cu8X13][Cu4X4(OH)(H2O)] (ACX-THTO, A = K, Rb, and Cs; X = Cl, Br; THTO = C4H8OS) with the highest photoluminescence quantum yield (PLQY) of 42%. These compounds possess similar crystal structures, and their emission can be tuned in the spectral range of 676-732 nm by controlling their compositions. Additionally, by removing and adding THTO, the reversible transformation between CsCu2Br3 featuring one-dimensional (1D) chains and Cs6(C4H8OS)12[Cu8Br13][Cu4Br4(OH)(H2O)] (CCB-THTO) with zero-dimensional (0D) clusters can be realized. We also demonstrate that the incorporation of THTO in the crystal structures instead of dimethyl sulfoxide (DMSO) can significantly enhance the stability and PL of compounds with the same inorganic components.

Bathiapeptides: Polythiazole-Containing Peptides from a Marine Biofilm-Derived Bacillus sp.

Bacteria in marine biofilms are a rich reservoir of natural products. To facilitate novel secondary metabolite discovery, we investigated the metabolic profile of a marine biofilm-derived Bacillus sp. B19-2 by combining bioinformatics and LC-UV-MS analyses. After dereplication and purification of putatively unknown compounds, a new family of compounds 1-8 was uncovered and named bathiapeptides. Structural elucidation using NMR, HRESIMS, ozonolysis, advanced Marfey's analysis, and X-ray diffraction revealed that bathiapeptides are polypeptides that contain a rare polythiazole moiety. These compounds exhibited strong cytotoxicity against Hep G2, HeLa, MCF-7, and MGC-803 cell lines, and the lowest IC50 value was 0.5 µM. An iterative biosynthesis logic in bathiapeptides' biosynthesis was proposed based on the identified chemical structures and putative gene cluster analysis.

Dewar Metallabenzenes from Reactions of Metallacyclobutadienes with Alkynes.

Dewar benzenes, the metastable valence isomers of benzenes, have been extensively studied both experimentally and theoretically. In contrast, little is known about Dewar metallabenzenes having a transition metal in the skeletal framework, despite the recent intensive interest in the development of chemistry of metallabenzenes. Herein, we report the isolation and characterization of the first examples of structurally characterized Dewar metallabenzenes. These compounds were generated via unprecedented reactions of metallacyclobutadienes with aminoalkynes.

Solution-processed AIEgen NIR OLEDs with EQE Approaching 15 .

Organic near-infrared (NIR) luminogens have attracted intensive attention considering their vast potential applications in areas like bioimaging, organic light-emitting diodes (OLEDs) and night-vision telecommunication. However, organic NIR luminogens with high solid quantum efficiencies are scarce, limiting their applications. Here, we reported an electron-deficient acceptor, BSM, based on dithiafulvalene and benzothiadiazole, which could work as a strong acceptor to produce highly efficient NIR emitters with aggregation-induced emission (AIE) property. One of the AIEgens, TBSMCN emitted at 820 nm with a solid quantum yield of 10.7 %. When applied to solution-processed OLEDs, an outstanding external quantum efficiency (EQE) of 9.4 % was achieved with a peak wavelength at 728 nm. Moreover, its non-doped device could achieve an extraordinary EQE of 2.2 % peaking at 804 nm. In the further optimized configuration, when an extra sensitizer was added to harvest triplet excitons, the EQE unprecedentedly soared up to 14.3 % with a peak wavelength of 750 nm.

Hierarchical Supramolecular Self-Assembly: Fabrication and Visualization of Multiblock Microstructures.

Due to the fast dynamics and re-equilibration of supramolecular self-assembly, bottom-up molecular strategies to fabricate well-defined and controllable multiblock structures are rare. Herein, we propose a new concept for fabrication of fluorescent multiblock microcolumns containing 1 to 7 blocks via hierarchical supramolecular self-assembly based on cucurbit[8]uril (CB[8]), NaBr and an AIEgen guest. Through the complexation between CB[8] and different numbers of AIEgen guests (2, 1, 0), the competitive displacement caused by the binding of the sodium cation to the CB[8] portal, and the reversible assembly of positively charged guests in salt solutions, one-pot hierarchical supramolecular self-assembly is realized. The molecular structure of each block is analyzed by single-crystal X-ray diffraction. The AIEgen enables the self-assembly of multiblocks to be visualized, understood, and regulated.

How Do Molecular Motions Affect Structures and Properties at Molecule and Aggregate Levels?

Molecular motions are essential natures of matter and play important roles in their structures and properties. However, owing to the diversity and complexity of structures and behaviors, the study of motion-structure-property relationships remains a challenge, especially at all levels of structural hierarchy from molecules to macro-objects. Herein, luminogens showing aggregation-induced emission (AIE), namely, 9-(pyrimidin-2-yl)-carbazole (PyCz) and 9-(5-R-pyrimidin-2-yl)-carbazole [R = Cl (ClPyCz), Br (BrPyCz), and CN (CyPyCz)], were designed and synthesized, to decipher the dependence of materials' structures and properties on molecular motions at the molecule and aggregate levels. Experimental and theoretical analysis demonstrated that the active intramolecular motions in the excited state of all molecules at the single-molecule level endowed them with more twisted structural conformations and weak emission. However, owing to the restriction of intramolecular motions in the nano/macroaggregate state, all the molecules assumed less twisted conformations with bright emission. Unexpectedly, intermolecular motions could be activated in the macrocrystals of ClPyCz, BrPyCz, and CyPyCz through the introduction of external perturbations, and synergic strong and weak intermolecular interactions allowed their crystals to undergo reversible deformation, which effectively solved the problem of the brittleness of organic crystals, while endowing them with excellent elastic performance. Thus, the present study provided insights on the motion-structure-property relationship at each level of structural hierarchy and offered a paradigm to rationally design multifunctional AIE-based materials.

How to Manipulate Through-Space Conjugation and Clusteroluminescence of Simple AIEgens with Isolated Phenyl Rings.

Apart from the traditional through-bond conjugation (TBC), through-space conjugation (TSC) is gradually proved as another important interaction in photophysical processes, especially for the recent observation of clusteroluminescence from nonconjugated molecules. However, unlike TBC in conjugated chromophores, it is still challenging to manipulate TSC and clusteroluminescence. Herein, simple and nonconjugated triphenylmethane (TPM) and its derivatives with electron-donating and electron-withdrawing groups were synthesized, and their photophysical properties were systematically studied. TPM was characterized with visible clusteroluminescence due to the intramolecular TSC. Experimental and theoretical results showed that the introduction of electron-donating groups into TPM could red-shift the wavelength and increase the efficiency of clusteroluminescence simultaneously, due to the increased electronic density and stabilization of TSC. However, TPM derivatives with electron-withdrawing groups showed inefficient or even quenched clusteroluminescence caused by the vigorous excited-state intramolecular motion and intermolecular photoinduced electron transfer process. This work provides a reliable strategy to manipulate TSC and clusteroluminescence.

Visualization and Manipulation of Solid-State Molecular Motions in Cocrystallization Processes.

Solid-state molecular motions (SSMM) play a critical role in adjusting behaviors and properties of materials. However, research on SSMM, especially for multicomponent systems, suffers from various problems and is rarely explored. Herein, through collaboration with cocrystal engineering, visualization and manipulation of SSMM in two-component systems, namely, FSBO ((E)-2-(4-fluorostyryl)benzo[d]oxazole)/TCB (1,2,4,5-tetracyanobenzene) and PVBO ((E)-2-(2-(pyridin-4-yl)vinyl)benzo[d]oxazole)/TCB, were realized. The obtained yellow-emissive F/T (FSBO/TCB) cocrystal displayed turn-on fluorescence, and the green-emissive P/T (PVBO/TCB) cocrystal presented redder emission, both of which exhibited an aggregation-induced emission property. At varied pressure and temperature, the grinding mixtures of FSBO/TCB and PVBO/TCB displayed different molecular motions that were readily observed through the fluorescence signal. Notably, even without grinding, FSBO and TCB molecules could move over for 4 mm in a 1D tube. The unique emission changes induced by SSMM were applied in information storage and dynamic anticounterfeiting. This work not only visualized and manipulated SSMM but offered more insights for multicomponent study in aggregate science.

An Air-Stable Organic Radical from a Controllable Photoinduced Domino Reaction of a Hexa-aryl Substituted Anthracene.

Air-stable organic radicals and radical ions have attracted great attention for their far-reaching application ranging from bioimaging to organic electronics. However, because of the highly reactive nature of organic radicals, the design and synthesis of air-stable organic radicals still remains a challenge. Herein, an air-stable organic radical from a controllable photoinduced domino reaction of a hexa-aryl substituted anthracene is described. The domino reaction involves a photoinduced [4 + 2] cycloaddition reaction, rearrangement, photolysis, and an elimination reaction; 1H/13C NMR spectroscopy, high resolution mass spectrometry, single-crystal X-ray diffraction, and EPR spectroscopy were exploited for characterization. Furthermore, a photoinduced domino reaction mechanism is proposed according to the experimental and theoretical studies. In addition, the effects of employing push and pull electronic groups on the controllable photoinduced domino reaction were investigated. This article not only offers a new blue emitter and novel air-stable organic radical compound for potential application in organic semiconductor applications, but also provides a perspective for understanding the fundamentals of the reaction mechanism on going from anthracene to semiquinone in such anthracene systems.

Oxidizing Cerium(IV) Alkoxide Complexes Supported by the Kläui Ligand [Co(η5-C5H5){P(O)(OEt)2}3]-: Synthesis, Structure, and Redox Reactivity.

Tetravalent cerium alkoxide complexes supported by the Kläui tripodal ligand [Co(η5-C5H5){P(O)(OEt)2}3]- (LOEt-) have been synthesized, and their nucleophilic and redox reactivity have been studied. Treatment of the Ce(IV) oxo complex [CeIV(LOEt)2(O)(H2O)]·MeCONH2 (1) with iPrOH or reaction of [CeIV(LOEt)2Cl2] (2) with Ag2O in iPrOH afforded the Ce(IV) dialkoxide complex [CeIV(LOEt)2(OiPr)2] (3-iPr). The methoxide and ethoxide analogues [CeIV(LOEt)2(OR)2] (R = Me (3-Me), Et (3-Et)) have been prepared similarly from 2 and Ag2O in ROH. Reaction of 3-iPr with an equimolar amount of 2 yielded a new Ce(IV) complex that was formulated as the chloro-alkoxide complex [CeIV(LOEt)2(OiPr)Cl] (4). Treatment of 3-iPr with HX and methyl triflate (MeOTf) afforded [Ce(LOEt)2X2] (X- = Cl-, NO3-, PhO-) and [CeIV(LOEt)2(OTf)2], respectively, whereas treatment with excess CO2 in hexane led to isolation of the Ce(IV) carbonate [CeIV(LOEt)2(CO3)]. 3-iPr reacted with water in hexane to give a Ce(III) complex and a Ce(IV) species, presumably the reported tetranuclear oxo cluster [CeIV4(LOEt)4(O)5(OH)2]. The Ce(IV) alkoxide complexes are capable of oxidizing substituted phenols, possibly via a proton-coupled electron transfer pathway. Treatment of 3-iPr with ArOH afforded the Ce(III) aryloxide complexes [CeIII(LOEt)2(OAr)] (Ar = 2,4,6-tri-tert-butylphenyl (5), 2,6-diphenylphenyl (6)). On the other hand, a Ce(III) complex containing a monodeprotonated 2,2'-biphenol ligand, [CeIII(LOEt)2(tBu4C12H4O2H)] (7) (tBu4C12H4O2H2 = 4,4',6,6'-tetra-tert-butyl-2,2'-biphenol), was isolated from the reaction of 3-iPr with 2,4-di-tert-butylphenol. The crystal structures of complexes 3-iPr, 3-Me, 3-Et, and 5-7 have been determined.

Robust Supramolecular Nano-Tunnels Built from Molecular Bricks*.

Herein we report a linear ionic molecule that assembles into a supramolecular nano-tunnel structure through synergy of trident-type ionic interactions and π-π stacking interactions. The nano-tunnel crystal exhibits anisotropic guest adsorption behavior. The material shows good thermal stability and undergoes multi-stage single-crystal-to-single-crystal phase transformations to a nonporous structure on heating. The material exhibits a remarkable chemical stability under both acidic and basic conditions, which is rarely observed in supramolecular organic frameworks and is often related to structures with designed hydrogen-bonding interactions. Because of the high polarity of the tunnels, this molecular crystal also shows a large CO2 -adsorption capacity while excluding other gases at ambient temperature, leading to high CO2 /CH4 selectivity. Aggregation-induced emission of the molecules gives the bulk crystals vapochromic properties.

Chiral Phosphoric Acid Catalyzed Enantioselective Synthesis of α-Tertiary Amino Ketones from Sulfonium Ylides.

Herein we disclose a new catalytic asymmetric approach for the synthesis of chiral α-amino ketones, which is particularly useful for the less accessible acyclic α-tertiary cases. By a protonation-amination sequence, our approach represents a rare asymmetric H-heteroatom bond insertion by α-carbonyl sulfonium ylides, an attractive surrogate of diazocarbonyls. The mild intermolecular C-N bond formation was catalyzed by chiral phosphoric acids with excellent efficiency and enantioselectivity. The products are precursors to other important chiral amine derivatives, including drug molecules and chiral ligands. The enantioselectivity was controlled by dynamic kinetic resolution in the amination step, rather than the initial protonation. This process opens up a new platform for the development of other related insertion reactions.