Observation of ultracold atomic bubbles in orbital microgravity.

Substantial leaps in the understanding of quantum systems have been driven by exploring geometry, topology, dimensionality and interactions in ultracold atomic ensembles1-6. A system where atoms evolve while confined on an ellipsoidal surface represents a heretofore unexplored geometry and topology. Realizing an ultracold bubble-potentially Bose-Einstein condensed-relates to areas of interest including quantized-vortex flow constrained to a closed surface topology, collective modes and self-interference via bubble expansion7-17. Large ultracold bubbles, created by inflating smaller condensates, directly tie into Hubble-analogue expansion physics18-20. Here we report observations from the NASA Cold Atom Lab21 facility onboard the International Space Station of bubbles of ultracold atoms created using a radiofrequency-dressing protocol. We observe bubble configurations of varying size and initial temperature, and explore bubble thermodynamics, demonstrating substantial cooling associated with inflation. We achieve partial coverings of bubble traps greater than one millimetre in size with ultracold films of inferred few-micrometre thickness, and we observe the dynamics of shell structures projected into free-evolving harmonic confinement. The observations are among the first measurements made with ultracold atoms in space, using perpetual freefall to explore quantum systems that are prohibitively difficult to create on Earth. This work heralds future studies (in orbital microgravity) of the Bose-Einstein condensed bubble, the character of its excitations and the role of topology in its evolution.

Patellofemoral contact forces and knee gait mechanics 3 months after ACL reconstruction are associated with cartilage degradation 24 months after surgery.

OBJECTIVE: Evaluate patellofemoral cartilage health, as assessed by quantitative magnetic resonance imaging (qMRI) T2 relaxation times, 24-months after ACL reconstruction (ACLR) and determine if they were associated with patellofemoral contact forces and knee mechanics during gait 3 months after surgery. DESIGN: Thirty individuals completed motion analysis during overground walking at a self-selected speed 3 months after ACLR. An EMG-driven neuromusculoskeletal model was used to determine muscle forces, which were then used in a previously described model to estimate patellofemoral contact forces. Biomechanical variables of interest included peak patellofemoral contact force, peak knee flexion angle and moment, and walking speed. These same participants underwent a sagittal bilateral T2 mapping qMRI scan 24-months after surgery. T2 relaxation times were estimated for both patellar and trochlear cartilage. Paired t-tests were used to compare T2 relaxation times between limbs while Pearson correlations and linear regressions were utilized to assess the association between the biomechanical variables of interest and T2 relaxation times. RESULTS: Prolonged involved limb trochlear T2 relaxation times (vs uninvolved) were present 24-months after surgery, indicating worse cartilage health. No differences were detected in patellar cartilage. Significant negative associations were present within the involved limb for all the biomechanical variables of interest 3 months after ACLR and trochlear T2 relaxation times at 24-months. No associations were found in patellar cartilage or within the uninvolved limb. CONCLUSIONS: Altered involved limb trochlear cartilage health is present 24-months after ACLR and may be related to patellofemoral loading and other walking gait mechanics 3 months after surgery.

Affect, desire and interpretation.

Are interpersonal comparisons of desire possible? Can we give an account of how facts about desires are grounded that underpins such comparisons? This paper supposes the answer to the first question is yes, and provides an account of the nature of desire that explains how this is so. The account is a modification of the interpretationist metaphysics of representation that the author has recently been developing. The modification is to allow phenomenological affective valence into the "base facts" on which correct interpretation is grounded. To use this extra resource within that theory to vindicate interpersonal comparisons, we will need to appeal rational connections between level of valence and level of desire, which this paper sets out and examines.

Publicity and Common Commitment to Believe.

Information can be public among a group. Whether or not information is public matters, for example, for accounts of interdependent rational choice, of communication, and of joint intention. A standard analysis of public information identifies it with (some variant of) common belief. The latter notion is stipulatively defined as an infinite conjunction: for p to be commonly believed is for it to believed by all members of a group, for all members to believe that all members believe it, and so forth. This analysis is often presupposed without much argument in philosophy. Theoretical entrenchment or intuitions about cases might give some traction on the question, but give little insight about why the identification holds, if it does. The strategy of this paper is to characterize a practical-normative role for information being public, and show that the only things that play that role are (variants of) common belief as stipulatively characterized. In more detail: a functional role for "taking a proposition for granted" in non-isolated decision making is characterized. I then present some minimal conditions under which such an attitude is correctly held. The key assumption links this attitude to beliefs about what is public. From minimal a priori principles, we can argue that a proposition being public among a group entails common commitment to believe among that group. Later sections explore partial converses to this result, the factivity of publicity and publicity from the perspective of outsiders to the group, and objections to the aprioricity of the result deriving from a posteriori existential presuppositions. Supplementary Information: The online version contains supplementary material available at 10.1007/s10670-021-00393-x.

In Situ Particle Measurements Deemphasize the Role of Size in Governing the Sinking Velocity of Marine Particles.

Sinking particles are important in delivering carbon to the deep ocean where it may be stored out of contact with the atmosphere. Whilst particle sinking velocities are known to be influenced by a multitude of factors, size-based parameterizations remain common in biogeochemical models and in the methods used to determine particulate fluxes from autonomous platforms. Here we carried out an extensive literature review (62 data sets) into the size-sinking velocity relationship, and find the relationship is much weaker for studies examining particles in situ (median R 2 = 0.09) compared with ex situ studies (median R 2 = 0.35). This discrepancy may be because particles examined in the laboratory have more uniform properties than those studied in situ. Our review highlights the shortcomings of using a simple relationship between size and sinking velocity to calculate sinking particulate fluxes in the ocean; considering additional particle characteristics will enable more accurate calculations of particulate fluxes.

Multiple Sclerosis Performance Test: validation of self-administered neuroperformance modules.

BACKGROUND AND PURPOSE: The purpose was to determine the test-retest reliability, practice effects, convergent validity and sensitivity to multiple sclerosis (MS) disability of neuroperformance subtests from the patient self-administered Multiple Sclerosis Performance Test (MSPT) designed to assess low contrast vision (Contrast Sensitivity Test, CST), upper extremity motor function (Manual Dexterity Test, MDT) and lower extremity motor function (Walking Speed Test, WST) and to introduce the concept of regression-based norms to aid clinical interpretation of performance scores using the MSPT cognition test (Processing Speed Test, PST) as an example. METHODS: Substudy 1 assessed test-retest reliability, practice effects and convergent validity of the CST, MDT and WST in 30 MS patients and 30 healthy controls. Substudy 2 examined sensitivity to MS disability in over 600 MS patients as part of their routine clinic assessment. Substudy 3 compared performance on the PST in research volunteers and clinical samples. RESULTS: The CST, MDT and WST were shown to be reliable, valid and sensitive to MS outcomes. Performance was comparable to technician-administered testing. PST performance was poorer in the clinical sample compared with the research volunteer sample. CONCLUSIONS: The self-administered MSPT neuroperformance modules produce reliable, objective metrics that can be used in clinical practice and support outcomes research. Published studies which require patient voluntary consent may underestimate the rate of cognitive dysfunction observed in a clinical setting.

An optical lattice clock with accuracy and stability at the 10(-18) level.

Progress in atomic, optical and quantum science has led to rapid improvements in atomic clocks. At the same time, atomic clock research has helped to advance the frontiers of science, affecting both fundamental and applied research. The ability to control quantum states of individual atoms and photons is central to quantum information science and precision measurement, and optical clocks based on single ions have achieved the lowest systematic uncertainty of any frequency standard. Although many-atom lattice clocks have shown advantages in measurement precision over trapped-ion clocks, their accuracy has remained 16 times worse. Here we demonstrate a many-atom system that achieves an accuracy of 6.4 × 10(-18), which is not only better than a single-ion-based clock, but also reduces the required measurement time by two orders of magnitude. By systematically evaluating all known sources of uncertainty, including in situ monitoring of the blackbody radiation environment, we improve the accuracy of optical lattice clocks by a factor of 22. This single clock has simultaneously achieved the best known performance in the key characteristics necessary for consideration as a primary standard-stability and accuracy. More stable and accurate atomic clocks will benefit a wide range of fields, such as the realization and distribution of SI units, the search for time variation of fundamental constants, clock-based geodesy and other precision tests of the fundamental laws of nature. This work also connects to the development of quantum sensors and many-body quantum state engineering (such as spin squeezing) to advance measurement precision beyond the standard quantum limit.

Weak-link Josephson Junctions Made from Topological Crystalline Insulators.

We report on the fabrication of Josephson junctions using the topological crystalline insulator Pb_{0.5}Sn_{0.5}Te as the weak link. The properties of these junctions are characterized and compared to those fabricated with weak links of PbTe, a similar material yet topologically trivial. Most striking is the difference in the ac Josephson effect: junctions made with Pb_{0.5}Sn_{0.5}Te exhibit a rich subharmonic structure consistent with a skewed current-phase relation. This structure is absent in junctions fabricated from PbTe. A discussion is given on the origin of this effect as an indication of novel behavior arising from the topologically nontrivial surface state.

Selective equilibration of spin-polarized quantum Hall edge states in graphene.

We report on transport measurements of dual-gated, single-layer graphene devices in the quantum Hall regime, allowing for independent control of the filling factors in adjoining regions. Progress in device quality allows us to study scattering between edge states when the fourfold degeneracy of the Landau level is lifted by electron correlations, causing edge states to be spin and/or valley polarized. In this new regime, we observe a dramatic departure from the equilibration seen in more disordered devices: edge states with opposite spins propagate without mixing. As a result, the degree of equilibration inferred from transport can reveal the spin polarization of the ground state at each filling factor. In particular, the first Landau level is shown to be spin polarized at half filling, providing an independent confirmation of a conclusion of Young et al. [Nat. Phys. 8, 550 (2012). The conductance in the bipolar regime is strongly suppressed, indicating that copropagating edge states, even with the same spin, do not equilibrate along PN interfaces. We attribute this behavior to the formation of an insulating ν = 0 stripe at the PN interface.

Who mixes with whom among men who have sex with men? Implications for modelling the HIV epidemic in southern India.

In India, the identity of men who have sex with men (MSM) is closely related to the role taken in anal sex (insertive, receptive or both), but little is known about sexual mixing between identity groups. Both role segregation (taking only the insertive or receptive role) and the extent of assortative (within-group) mixing are known to affect HIV epidemic size in other settings and populations. This study explores how different possible mixing scenarios, consistent with behavioural data collected in Bangalore, south India, affect both the HIV epidemic, and the impact of a targeted intervention. Deterministic models describing HIV transmission between three MSM identity groups (mostly insertive Panthis/Bisexuals, mostly receptive Kothis/Hijras and versatile Double Deckers), were parameterised with behavioural data from Bangalore. We extended previous models of MSM role segregation to allow each of the identity groups to have both insertive and receptive acts, in differing ratios, in line with field data. The models were used to explore four different mixing scenarios ranging from assortative (maximising within-group mixing) to disassortative (minimising within-group mixing). A simple model was used to obtain insights into the relationship between the degree of within-group mixing, R0 and equilibrium HIV prevalence under different mixing scenarios. A more complex, extended version of the model was used to compare the predicted HIV prevalence trends and impact of an HIV intervention when fitted to data from Bangalore. With the simple model, mixing scenarios with increased amounts of assortative (within-group) mixing tended to give rise to a higher R0 and increased the likelihood that an epidemic would occur. When the complex model was fit to HIV prevalence data, large differences in the level of assortative mixing were seen between the fits identified using different mixing scenarios, but little difference was projected in future HIV prevalence trends. An oral pre-exposure prophylaxis (PrEP) intervention was modelled, targeted at the different identity groups. For intervention strategies targeting the receptive or receptive and versatile MSM together, the overall impact was very similar for different mixing patterns. However, for PrEP scenarios targeting insertive or versatile MSM alone, the overall impact varied considerably for different mixing scenarios; more impact was achieved with greater levels of disassortative mixing.

Optimizing CT angiography in patients with Fontan physiology: single-center experience of dual-site power injection.

AIM: To identify adult patients with single-ventricle congenital heart disease and Fontan procedure palliation who have been misdiagnosed with or incompletely evaluated for pulmonary embolism. Additionally, this study was designed to demonstrate that simultaneous, dual-injection of contrast medium into an upper and lower extremity vein is superior to single-injection protocols for CT angiography (CTA) of the chest in this population. MATERIALS AND METHODS: Patients included in the study were retrospectively selected from the Adult Congenital Heart Disease (ACHD) database. Search criteria included history of Fontan palliation and available chest CT examination. Patients were evaluated for (1) type of congenital heart disease and prior operations;(2) indication for initial CT evaluation;(3) route of contrast medium administration for the initial CT examination and resulting diagnosis;(4) whether or not anticoagulation therapy was initiated; and (5) final diagnosis and treatment plan.Results: The query of the ACHD database resulted in 28 individuals or patients with Fontan palliation (superior and inferior venae cavae anastomosed to the pulmonary arteries). Of these, 19 patients with Fontan physiology underwent CTA of the pulmonary circulation, and 17 had suboptimal imaging studies. Unfortunately, seven of these 17 patients (41%) were started on anticoagulation therapy due to a diagnosis of pulmonary embolism that was later excluded. CONCLUSION: Patients with single-ventricle/Fontan physiology are at risk of thromboembolic disease. Therefore, studies evaluating their complex anatomy must be performed with the optimal imaging protocol to ensure diagnostic accuracy, which is best achieved with dual-injection of an upper and lower extremity central vein.

An integrated modeling approach for estimating the water quality benefits of conservation practices at the river basin scale.

The USDA initiated the Conservation Effects Assessment Project (CEAP) to quantify the environmental benefits of conservation practices at regional and national scales. For this assessment, a sampling and modeling approach is used. This paper provides a technical overview of the modeling approach used in CEAP cropland assessment to estimate the off-site water quality benefits of conservation practices using the Ohio River Basin (ORB) as an example. The modeling approach uses a farm-scale model, Agricultural Policy Environmental Extender (APEX), and a watershed scale model (the Soil and Water Assessment Tool [SWAT]) and databases in the Hydrologic Unit Modeling for the United States system. Databases of land use, soils, land use management, topography, weather, point sources, and atmospheric depositions were developed to derive model inputs. APEX simulates the cultivated cropland, Conserve Reserve Program land, and the practices implemented on them, whereas SWAT simulates the noncultivated land (e.g., pasture, range, urban, and forest) and point sources. Simulation results from APEX are input into SWAT. SWAT routes all sources, including APEX's, to the basin outlet through each eight-digit watershed. Each basin is calibrated for stream flow, sediment, and nutrient loads at multiple gaging sites and turned in for simulating the effects of conservation practice scenarios on water quality. Results indicate that sediment, nitrogen, and phosphorus loads delivered to the Mississippi River from ORB could be reduced by 16, 15, and 23%, respectively, due to current conservation practices. Modeling tools are useful to provide science-based information for assessing existing conservation programs, developing future programs, and developing insights on load reductions necessary for hypoxia in the Gulf of Mexico.

Effects of agricultural conservation practices on N loads in the Mississippi-atchafalaya river basin.

A modeling framework consisting of a farm-scale model, Agricultural Policy Environmental Extender (APEX); a watershed-scale model, Soil and Water Assessment Tool (SWAT); and databases was used in the Conservation Effects Assessment Project to quantify the environmental benefits of conservation practices on cropland. APEX is used to simulate conservation practices on cultivated cropland and Conservation Reserve Program land to assess the edge-of-field water-quality benefits. Flow and pollutant loadings from APEX are input to SWAT. SWAT simulates the remaining noncultivated land and routes flow and loads generated from noncultivated land, point sources, and cropland to the basin outlet. SWAT is used for assessing the effects of practices on local and in-stream water-quality benefits. Each river basin is calibrated and validated for streamflow and loads at multiple gauging stations. The objectives of the current study are to estimate the effects of currently existing and additional conservation practices on total N (TN) loads in the Mississippi-Atchafalaya River Basin (MARB) and draw insights on TN load reductions necessary for reducing the hypoxic zone in the Gulf of Mexico. The effects of conservation practice scenarios on local and in-stream (riverine) water quality are evaluated. Model results indicate that conservation practices currently on cropland have reduced the TN losses to local waters between 20 and 59% in the six river basins within MARB and the TN load discharged to the Gulf by 17%. Further water-quality improvement can be obtained in the MARB with additional conservation treatment.

Insulating behavior at the neutrality point in single-layer graphene.

The fate of the low-temperature conductance at the charge-neutrality (Dirac) point in a single sheet of graphene on boron nitride is investigated down to 20 mK. As the temperature is lowered, the peak resistivity diverges with a power-law behavior and becomes as high as several megohms per square at the lowest temperature, in contrast with the commonly observed saturation of the conductivity. As a perpendicular magnetic field is applied, our device remains insulating and directly transitions to the broken-valley-symmetry, ν=0 quantum Hall state, indicating that the insulating behavior we observe at zero magnetic field is a result of broken valley symmetry. Finally we discuss the possible origins of this effect.

Comparison of two independent Sr optical clocks with 1×10(-17) stability at 10(3) s.

Many-particle optical lattice clocks have the potential for unprecedented measurement precision and stability due to their low quantum projection noise. However, this potential has so far never been realized because clock stability has been limited by frequency noise of optical local oscillators. By synchronously probing two ^{87}Sr lattice systems using a laser with a thermal noise floor of 1×10(-15), we remove classically correlated laser noise from the intercomparison, but this does not demonstrate independent clock performance. With an improved optical oscillator that has a 1×10(-16) thermal noise floor, we demonstrate an order of magnitude improvement over the best reported stability of any independent clock, achieving a fractional instability of 1×10(-17) in 1000 s of averaging time for synchronous or asynchronous comparisons. This result is within a factor of 2 of the combined quantum projection noise limit for a 160 ms probe time with ~10(3) atoms in each clock. We further demonstrate that even at this high precision, the overall systematic uncertainty of our clock is not limited by atomic interactions. For the second Sr clock, which has a cavity-enhanced lattice, the atomic-density-dependent frequency shift is evaluated to be -3.11×10(-17) with an uncertainty of 8.2×10(-19).

Unconventional Josephson effect in hybrid superconductor-topological insulator devices.

We report on transport properties of Josephson junctions in hybrid superconducting-topological insulator devices, which show two striking departures from the common Josephson junction behavior: a characteristic energy that scales inversely with the width of the junction, and a low characteristic magnetic field for suppressing supercurrent. To explain these effects, we propose a phenomenological model which expands on the existing theory for topological insulator Josephson junctions.

The characterization and transmission of scattered radiation resulting from x-ray beams filtered with zero to 0.99 mm copper.

The specification of shielding for fluoroscopic facilities in the UK is based on the determination of scatter incident on a barrier using a simple formula linking kerma area product and scatter kerma. Over the last few years there has been a move to incorporate additional copper filtration in equipment used for high dose fluoroscopic and interventional examinations, and the existing formula does not take this into account. The spectral and transmission characteristics of the scattered radiation resulting from a primary x-ray beam filtered with additional copper are not known. In this study, the relationship between primary and scattered radiation in these beams has been investigated as have their transmission characteristics. The scatter kerma area product from filtered beams is shown to be greater than that from conventional x-rays and a simple numerical correction linking the two has been derived. The implications for shielding calculations have been assessed and the impact of the correction on calculated barrier thickness has been shown to be relatively small. The broad beam transmission characteristics of the radiation scattered from the filtered beams have been simulated using Monte Carlo methods and found to be adequately described by the standard transmission equation using conventional coefficients.

Establishment of scatter factors for use in shielding calculations and risk assessment for computed tomography facilities.

The specification of shielding for CT facilities in the UK and many other countries has been based on isodose scatter curves supplied by the manufacturers combined with the scanner's mAs workload. Shielding calculations for radiography and fluoroscopy are linked to a dose measurement of radiation incident on the patient called the kerma-area product (KAP), and a related quantity, the dose-length product (DLP), is now employed for assessment of CT patient doses. In this study the link between scatter air kerma and DLP has been investigated for CT scanners from different manufacturers. Scatter air kerma values have been measured and scatter factors established that can be used to estimate air kerma levels within CT scanning rooms. Factors recommended to derive the scatter air kerma at 1 m from the isocentre are 0.36 µGy (mGy cm)(-1) for the body and 0.14 µGy (mGy cm)(-1) for head scans. The CT scanner gantries only transmit 10% of the scatter air kerma level and this can also be taken into account when designing protection. The factors can be used to predict scatter air kerma levels within a scanner room that might be used in risk assessments relating to personnel whose presence may be required during CT fluoroscopy procedures.

Derivation of factors for estimating the scatter of diagnostic x-rays from walls and ceiling slabs.

Computed tomography (CT) scanning rooms and interventional x-ray facilities with heavy workloads may require the installation of shielding to protect against radiation scattered from walls or ceiling slabs. This is particularly important for the protection of those operating x-ray equipment from within control cubicles who may be exposed to radiation scattered from the ceiling over the top of the protective barrier and round the side if a cubicle door is not included. Data available on the magnitude of this tertiary scatter from concrete slabs are limited. Moreover, there is no way in which tertiary scatter levels can be estimated easily for specific facilities. There is a need for a suitable method for quantification of tertiary scatter because of the increases in workloads of complex x-ray facilities. In this study diagnostic x-ray air kerma levels scattered from concrete and brick walls have been measured to verify scatter factors. The results have been used in a simulation of tertiary scatter for x-ray facilities involving summation of scatter contributions from elements across concrete ceiling slabs. The majority of the ceiling scatter air kerma to which staff behind a barrier will be exposed arises from the area between the patient/x-ray tube and the staff. The level depends primarily on the heights of the ceiling and protective barrier. A method has been developed to allow tertiary scatter levels to be calculated using a simple equation based on a standard arrangement for rooms with different ceiling and barrier heights. Coefficients have been derived for a CT facility and an interventional suite to predict tertiary scatter levels from the workload, so that consideration can be given to the protection options available.

Gate-defined graphene quantum point contact in the quantum Hall regime.

We investigate transport in a gate-defined graphene quantum point contact in the quantum Hall regime. Edge states confined to the interface of p and n regions in the graphene sheet are controllably brought together from opposite sides of the sample and allowed to mix in this split-gate geometry. Among the expected quantum Hall features, an unexpected additional plateau at 0.5h/e2 is observed. We propose that chaotic mixing of edge channels gives rise to the extra plateau.