Current speed sintering and high-speed sintering protocols compromise the translucency but not strength of yttria-stabilized zirconia.

OBJECTIVES: To investigate the impacts of speed and high-speed sintering on the densification, microstructure, phase composition, translucency, and flexural strength of yttria-stabilized zirconia (YSZ). METHODS: A total of 162 disc-shaped specimens (n = 18) were cold-isostatically pressed from 3YSZ (Zpex), 4YSZ (Zpex 4), and 5YSZ (Zpex Smile) powders (Tosoh Corporation) and sintered according to the following protocols: conventional (control, ∼12 h), speed (∼28 min for 3YSZ; ∼60 min for 4YSZ and 5YSZ), and high-speed (∼18 min) sintering. Dimensions of zirconia specimens after sintering and polishing (1-µm diamond grit finish) were Ø13.75 × 1 mm. Density, microstructure, phase content, translucency parameter, and biaxial flexural strength were evaluated using Archimedes', SEM, XRD, spectrophotometric, and piston-on-3-ball methods, respectively. Data were analyzed with either one-way ANOVA and Tukey's test or Kruskal-Wallis with Dunn's test (α = 0.05). RESULTS: For all YSZ compositions, conventional sintering yielded the highest density followed by speed then high-speed sintering. All sintering protocols resulted in similar strength values; however, speed and high-speed sintering protocols afforded significantly lower translucency relative to conventional sintering. XRD analysis revealed similar spectra for YSZs sintered by various protocols. The speed sintered specimens had the smallest grain size whereas the high-speed sintered 5YSZ possessed the largest grain size among all groups. SEM examination of all YSZ compositions revealed that the average pore size was an order of magnitude smaller than the average grain size. SIGNIFICANCE: Speed and high-speed sintering of YSZs yield similar strength but diminished density and translucency relative to their conventionally sintered counterparts.

Leveraging technology to increase the disseminability of evidence-based treatment of dental fear: An uncontrolled pilot study.

OBJECTIVES: U.S. and global estimates indicate that over 30% of adults fear receiving dental care, including over 20% who have visited a dentist in the last year, leading to avoidance and degraded oral and systemic health. Although evidence-based cognitive-behavioral treatments for dental fear (CBT-DF) exist, they have little impact on the millions who seek dental care annually because they are not disseminable (6 h of in-chair time, delivered only in person at a few sites). We developed a disseminable CBT-DF stepped-care treatment comprising (Step 1) a mobile-health application and, for those who remain fearful, (Step 2) a 1-h, one-on-one psychological treatment session that allows practice during exposure to the patient's most-feared stimuli. We hypothesized that the treatment would (a) be rated highly on usability and credibility and (b) result in clinically consequential (i.e., lowering fear into the 0-3 "no/low fear" zone) and statistically significant changes in global dental fear. METHOD: Racially/ethnically diverse patients (N = 48) with moderate to severe dental fear were recruited; all completed Step 1, and n = 16 completed Step 2. RESULTS: As hypothesized, users found the stepped-care treatment highly usable, credible, and helpful. Critically, this stepped-care approach produced reductions in patients' dental fear that were both clinically consequential (with half no longer fearful) and statistically significant (d = 1.11). CONCLUSIONS: This usable, credible, stepped-care approach to dental fear treatment holds promise for liberating evidence-based CBT-DF from specialty clinics, allowing broad dissemination.

A Pilot Study Exploring Caregivers' Experiences Related to the Use of a Smart Toothbrush by Children with Autism Spectrum Disorder.

BACKGROUND: Research on caregivers for children with intellectual disabilities, particularly those with autism spectrum disorder (ASD), has highlighted several obstacles to achieving better oral health. These include challenges with tolerating oral care, sensory processing differences, uncooperative behaviors, and communication impairments. There is limited understanding of what caregivers would consider "successful assistance" in improving oral health for these children. OBJECTIVES: This pilot study aimed to examine caregivers' and user's experiences with a Kids Smart Electric Toothbrush used by children with ASD. METHODS: It involved open-ended interviews and questionnaires with caregivers prior to utilization of the toothbrush and after 4 weeks of product use by the child. RESULTS: Seventeen children with ASD, aged 5-12, participated. A total of 58.8% of caregivers said their child brushed more often, and all reported brushing at least twice a day by week 4. Caregivers reported that children became more independent while brushing their teeth and achieved better quality brushing. Caregivers' frustration with the brushing process, satisfaction with the device, and need to assist the child with brushing were improved. Caregivers did encounter some technical difficulties with the app. CONCLUSION: This study will assist in exploring "smart" toothbrush technologies for oral hygiene in children with ASD.

A Real-world Toxicity Atlas Shows that Adverse Events of Combination Therapies Commonly Result in Additive Interactions.

PURPOSE: Combination therapies are a promising approach for improving cancer treatment, but it is challenging to predict their resulting adverse events in a real-world setting. EXPERIMENTAL DESIGN: We provide here a proof-of-concept study using 15 million patient records from the FDA Adverse Event Reporting System (FAERS). Complex adverse event frequencies of drugs or their combinations were visualized as heat maps onto a two-dimensional grid. Adverse event frequencies were shown as colors to assess the ratio between individual and combined drug effects. To capture these patterns, we trained a convolutional neural network (CNN) autoencoder using 7,300 single-drug heat maps. In addition, statistical synergy analyses were performed on the basis of BLISS independence or χ2 testing. RESULTS: The trained CNN model was able to decode patterns, showing that adverse events occur in global rather than isolated and unique patterns. Patterns were not likely to be attributed to disease symptoms given their relatively limited contribution to drug-associated adverse events. Pattern recognition was validated using trial data from ClinicalTrials.gov and drug combination data. We examined the adverse event interactions of 140 drug combinations known to be avoided in the clinic and found that near all of them showed additive rather than synergistic interactions, also when assessed statistically. CONCLUSIONS: Our study provides a framework for analyzing adverse events and suggests that adverse drug interactions commonly result in additive effects with a high level of overlap of adverse event patterns. These real-world insights may advance the implementation of new combination therapies in clinical practice.

Sustainable oral healthcare: what is it and how do we achieve it?

In recent years, there has been an increase in interest in what environmental sustainability means for healthcare, including oral health and dentistry. To help facilitate discussions among key stakeholders in this area, the Scottish Dental Clinical Effectiveness Programme held a workshop in November 2022. The purpose of this workshop was to explore current thinking on the subject of sustainability as it relates to oral health and to help stakeholders identify how to engage with the sustainability agenda. This paper presents an overview of the presentations and discussions from the workshop and highlights potential avenues for future work and collaboration.

The cariogenic dental biofilm: good, bad or just something to control?

This paper discusses the role of dental biofilm and adjunctive therapies in the management of dental caries. Dental biofilm is a site of bacterial proliferation and growth, in addition to being a location of acid production. It also serves as a reservoir for calcium exchange between the tooth and saliva. The salivary pellicle, a protein-rich biofilm layer, regulates the reaction between tooth surface, saliva and erosive acids. The protective effects of this pellicle on enamel are well established. However, understanding the effects of the pellicle/biofilm interaction in protecting dentin from erosive conditions requires further research. Saliva interacts with the biofilm, and is important in reducing the cariogenic effects of dental plaque as acidogenic bacteria consume fermentable carbohydrates producing acids that may result in tooth demineralization. Adequate supplies of healthy saliva can provide ingredients for successful remineralization. Strategies for managing the cariogenic biofilm are discussed with emphasis on the effectiveness of over-the-counter (OTC) products. However, since many toothpaste components have been altered recently, new clinical trials may be required for true validation of product effectiveness. A new generation of calcium-based remineralizing technologies may offer the ability to reverse the effects of demineralization. Nevertheless, remineralization is a microscopic subsurface phenomenon, and it will not macroscopically replace tooth structure lost in a cavitated lesion. Optimal management of cavitations requires early detection. This, coupled with advances in adhesive restorative materials and microsurgical technique, will allow the tooth to be restored with minimal destruction to nearby healthy tissue.