Improving the Photostability of Semiconducting Polymer Dots Using Buffers.

The photostability of fluorescent probes is critical in biological imaging, especially for long-term observational analyses. Here, we describe a simple and universal method to improve the photostability of semiconducting polymer dots (Pdots) and other fluorescent probes by using buffers. Using Pdots as a model system, we found that HEPES or MES buffer can improve the photostability of Pdots by a factor of 20. Through a systematic study, we show that Pdot photobleaching is dominated by photoinduced radicals which can be quenched by the piperazine or morpholine structures of these buffers, which act as radical scavengers. For conditions where choice of buffer is limited, we designed fluorescent polymers conjugated with radical scavengers to improve Pdot photostability. We then demonstrate a practical application in which HEPES buffer is used to improve the photostability of Pdots during cell imaging.

Ratiometric Barcoding for Mass Cytometry.

Barcoding is of importance for high-throughput cellular and molecular analysis. A ratiometric barcoding strategy using lanthanide-coordinated polymer dots (Ln-Pdots) was developed for mass cytometric analysis. By using 3 metal isotopes and 4 ratio intensity levels, 16 barcodes were generated to code, and later decode, cell samples in mass cytometry. The ratiometric Ln-Pdot barcodes not only provided high-mass-signal intensities but also eliminated the bias caused by different concentrations of the labeling reagents/barcodes and run-to-run differences in cell labeling efficiency. The ability to distinguish clearly the 16 sets of labeled MCF-7 cells with mass cytometry demonstrated the excellent resolving power of the ratiometric Ln-Pdot barcodes. Furthermore, the results from barcoding PBMC samples via CD45-specific cellular targeting indicated that the ratiometric Ln-Pdot barcodes could facilitate mass cytometry in high-throughput and multiplexed analysis, especially with precious human samples.

Photostable Ratiometric Pdot Probe for in Vitro and in Vivo Imaging of Hypochlorous Acid.

Developing probes for the detection of reactive oxygen species (ROS), a hallmark of many pathophysiological process, is imperative to both understanding the precise roles of ROS in many life-threatening diseases and optimizing therapeutic interventions. We herein report an all-in-one fluorescent semiconducting polymer based far-red to near-infrared (NIR) Pdot nanoprobe for the ratiometric detection of hypochlorous acid (HOCl). The fabrication takes the advantage of flexible polymer design by incorporating target-sensitive and target-inert fluorophores into a single conjugated polymer to avoid leakage or differential photobleaching problems existed in other nanoprobes. The obtained nanoprobe has improved performance in HOCl sensing, such as high brightness, ideal far-red to NIR optical window, excellent photostability, self-referenced ratiometric response, fast response, and high selectivity. The dual-emission property allows the sensitive imaging of HOCl fluctuations produced in living macrophage cells and peritonitis of living mice with high contrast. This study not only provides a powerful and promising nanoprobe to be potentially used in the investigations of in situ HOCl status of diseases in living systems but also puts forward the design strategy of a new category of ratiometric fluorescent probes facilitating precise and reliable measurement in biological systems.

Lanthanide-Coordinated Semiconducting Polymer Dots Used for Flow Cytometry and Mass Cytometry.

Simultaneous monitoring of biomarkers as well as single-cell analyses based on flow cytometry and mass cytometry are important for investigations of disease mechanisms, drug discovery, and signaling-network studies. Flow cytometry and mass cytometry are complementary to each other; however, probes that can satisfy all the requirements for these two advanced technologies are limited. In this study, we report a probe of lanthanide-coordinated semiconducting polymer dots (Pdots), which possess fluorescence and mass signals. We demonstrated the usage of this dual-functionality probe for both flow cytometry and mass cytometry in a mimetic cell mixture and human peripheral blood mononuclear cells as model systems. The probes not only offer high fluorescence signal for use in flow cytometry, but also show better performance in mass cytometry than the commercially available counterparts.

Squaraine-based polymer dots with narrow, bright near-infrared fluorescence for biological applications.

This article describes the design and development of squaraine-based semiconducting polymer dots (Pdots) that show large Stokes shifts and narrow-band emissions in the near-infrared (NIR) region. Fluorescent copolymers containing fluorene and squaraine units were synthesized and used as precursors for preparing the Pdots, where exciton diffusion and likely through-bond energy transfer led to highly bright and narrow-band NIR emissions. The resulting Pdots exhibit the emission full width at half-maximum of ∼36 nm, which is ∼2 times narrower than those of inorganic quantum dots in the same wavelength region (∼66 nm for Qdot705). The squaraine-based Pdots show a high fluorescence quantum yield (QY) of 0.30 and a large Stokes shift of ∼340 nm. Single-particle analysis indicates that the average per-particle brightness of the Pdots is ∼6 times higher than that of Qdot705. We demonstrate bioconjugation of the squaraine Pdots and employ the Pdot bioconjugates in flow cytometry and cellular imaging applications. Our results suggest that the narrow bandwidth, high QY, and large Stokes shift are promising for multiplexed biological detections.

Hybrid semiconducting polymer dot-quantum dot with narrow-band emission, near-infrared fluorescence, and high brightness.

This communication describes a new class of semiconducting polymer nanoparticle-quantum dot hybrid with high brightness, narrow emission, near-IR fluorescence, and excellent cellular targeting capability. Using this approach, we circumvented the current difficulty with obtaining narrow-band-emitting and near-IR-fluorescing semiconducting polymer nanoparticles while combining the advantages of both semiconducting polymer nanoparticles and quantum dots. We further demonstrated the use of this new class of hybrid nanomaterial for effective and specific cellular and subcellular labeling without any noticeable nonspecific binding. This hybrid nanomaterial is anticipated to find use in a variety of in vitro and in vivo biological applications.

Reversible photoswitching of spiropyran-conjugated semiconducting polymer dots.

Semiconducting polymer dots (Pdots) recently have emerged as a new class of ultrabright fluorescent probes with promising applications in biological detection and imaging. We developed photoswitchable Pdots by conjugating photochromic spiropyran molecules onto poly[9,9-dioctylfluorenyl-2,7-diyl)-co-1,4-benzo-{2,1'-3}-thiadiazole)] (PFBT). The modulation of fluorescence was achieved by ultraviolet irradiation, which converted spiropyran into its visible-absorbing merocyanine form. The merocyanine efficiently quenched the fluorescence of PFBT via Förster resonance energy transfer (FRET). We then reversed the quenching by subsequent irradiation with visible light to get back the fluorescence of PFBT. This FRET-based photomodulation of Pdot fluorescence could be repeated multiple times. We next conjugated biomolecules onto the surface of these photoswitchable Pdots and demonstrated their specific cellular and subcellular labeling to different types of cells without any noticeable nonspecific binding. We anticipate these photoswitchable and biocompatible Pdots will be useful in developing bioimaging techniques in the future.

Superiority of branched side chains in spontaneous nanowire formation: exemplified by poly(3-2-methylbutylthiophene) for high-performance solar cells.

One-dimensional nanostructures containing heterojunctions by conjugated polymers, such as nanowires, are expected to greatly facilitate efficient charge transfer in bulk-heterojunction (BHJ) solar cells. Thus, a combined theoretical and experimental approach is pursued to explore spontaneous nanowire formation. A dissipative particle dynamics simulation is first performed to study the morphologies formed by rodlike polymers with various side-chain structures. The results surprisingly predict that conjugated polymers with branched side chains are well suited to form thermodynamically stable nanowires. Proof of this concept is provided via the design and synthesis of a branched polymer of regioregular poly(3-2-methylbutylthiophene) (P3MBT), which successfully demonstrates highly dense nanowire formation free from any stringent conditions and stratagies. In BHJ solar cells fabricated using a blend of P3MBT and [6,6]-phenyl-C71-butyric acid methyl ester (PC(71) BM), P3MBT polymers are self-organized into highly crystalline nanowires with a d(100) spacing of 13.30 Å. The hole mobility of the P3MBT:PC(71) BM (1:0.5 by weight) blend film reaches 3.83 × 10(-4) cm(2) V(-1) s(-1) , and the maximum incident photon-to-current efficiency reaches 68%. The results unambiguously prove the spontaneous formation of nanowires using solution-processable conjugated polymers with branched alkyl side chains in BHJ solar cells.

Homogeneous, surfactant-free gold nanoparticles encapsulated by polythiophene analogues.

The synthesis of nanocrystal-polymer nanocomposites is reported, in which 2-(2-ethoxyethoxy)ethoxy modified polythiophene serves as the protecting group for dispersion and homogeneous size distribution of the nanoparticles, showing potential of this polymer-based material in optoelectronics and microelectronics.

Simple organic molecules bearing a 3,4-ethylenedioxythiophene linker for efficient dye-sensitized solar cells.

3,4-Ethylenedioxythiophene and bis[2-(2-methoxyethoxy)ethoxy]thiophene bridged donor-acceptor molecules for dye-sensitized solar cells have been synthesized, one of which achieved a solar-to-energy conversion efficiency of 7.3%, compared to 7.7% optimized for N719 dye.

Semiconducting polymer dots with bright narrow-band emission at 800 nm for biological applications.

The development of near-infrared (NIR) fluorescent probes is critical for in vivo exploration of the fundamental and complex processes in living systems by noninvasive fluorescence imaging techniques. Semiconducting polymer dots (Pdots) are emerging as important probes that exhibit several advantages, such as high brightness and biocompatibility. However, NIR-emitting Pdots are very rare, particularly at the center (∼800 nm) of the first optical window of biological tissues (between 650 nm and 950 nm). In this paper, we describe the synthesis of a semiconducting polymer with bright and narrow-band emission at 800 nm. The polymer was designed by incorporating a NIR porphyrin unit into a conjugated backbone; the polymer used a cascade energy transfer to produce the signal. The resulting Pdots possessed a narrow emission bandwidth (FWHM ∼ 23 nm) and good fluorescence quantum yield (QY = 8%), which is high for a near-IR emitter. The Pdots were bioconjugated with streptavidin for specific labeling of cellular targets, yielding higher staining index when compared with commercial NIR probes, such as PE-Cy7. Moreover, the NIR polymer was combined with a long-wavelength absorbing polymer to make bright Pdots (QY = 15%) for in vivo noninvasive imaging. These NIR Pdots with surface PEGylation led to high-contrast imaging of lymph nodes and tumors in a mouse model. This work highlights the great potential of the NIR Pdots for cellular and in vivo imaging applications.

Copper (II)-doped semiconducting polymer dots for nitroxyl imaging in live cells.

The first nanoparticle-based fluorescent probe for the specific detection of nitroxyl (HNO) was designed and constructed by doping copper(II) into semiconducting polymer dots (Pdots). The probe turns on and fluoresces in the presence of HNO. We used the new sensor to monitor changes of HNO levels in live cells.

Optical painting and fluorescence activated sorting of single adherent cells labelled with photoswitchable Pdots.

The efficient selection and isolation of individual cells of interest from a mixed population is desired in many biomedical and clinical applications. Here we show the concept of using photoswitchable semiconducting polymer dots (Pdots) as an optical 'painting' tool, which enables the selection of certain adherent cells based on their fluorescence, and their spatial and morphological features, under a microscope. We first develop a Pdot that can switch between the bright (ON) and dark (OFF) states reversibly with a 150-fold contrast ratio on irradiation with ultraviolet or red light. With a focused 633-nm laser beam that acts as a 'paintbrush' and the photoswitchable Pdots as the 'paint', we select and 'paint' individual Pdot-labelled adherent cells by turning on their fluorescence, then proceed to sort and recover the optically marked cells (with 90% recovery and near 100% purity), followed by genetic analysis.

A new series of fluorescent indicators for super acids.

The photophysical properties of fluorescent Hammett acidity indicator derived from 3,4,5,6-tetrahydrobis(pyrido[3,2-g]indolo)[2,3-a:3',2'-j]acridine (1a), 6-bis(pyrido[3,2-g]indol-2'-yl)pyridine (1b) and their analogues have been investigated in sulfuric acid solutions by means of absorption, fluorimetry, relaxation dynamics and computational approach. These new indicators undergo a reversible protonation process in the Hammett acidity range of H0 < 0, accompanied by a drastic increase of the bright blue-green (1a) or yellow (1b) fluorescence intensity upon increasing the acidity. For 1a in H2 SO4 , the emission yield increases as large as 200 folds from pH = -0.41 to the Hammett acidity range of -5.17, the results of which are rationalized by a much increase of the steric hindrance upon third protonation toward the central pyridinic site, together with their accompanied changes of electronic configuration from charge transfer to a delocalized ππ* character in the lowest lying excited state. The combination of 1a and 1b renders a wide and linear range of H0 measurement from -1.2 to -5.1 detected by highly intensive fluorescence.

Light-induced Crosslinkable Semiconducting Polymer Dots.

This paper describes a synthetic approach for photocrosslinkable polyfluorene (pc-PFO) semiconducting polymer dots, and demonstrates their superior ability to crosslink and form 3-D intermolecular polymer networks. The crosslinked pc-PFO Pdots are equipped with excellent encapsulating ability of functional small molecules. Optimum conditions of light irradiation on pc-PFO Pdots were investigated and clarified by using polymer thin films as a model. By employing the optimal light irradiation conditions, we successfully crosslinked pc-PFO Pdots and studied their particle sizes, photophysical, and colloidal properties. Single-particle imaging and dynamic-light-scattering measurements were conducted to understand the behaviors of photocrosslinked Pdots. Our results indicate pc-PFO Pdots can be easily photocrosslinked and the crosslinked species have excellent colloidal stability, physical and chemical stability, fluorescence brightness, and specific binding properties for cellular labeling. Considering that optical stimulus can work remotely, cleanly, and non-invasively, this study should pave the way for a promising approach to further develop stimuli-responsive ultrabright and versatile Pdot probes for biomedical imaging.

Yellow Fluorescent Semiconducting Polymer Dots with High Brightness, Small Size, and Narrow Emission for Biological Applications.

Cross-linked polymer dots with intense and narrow yellow emission were designed using boron-dipyrromethene (BODIPY) polymer as the acceptor and poly[9,9-dioctylfluorenyl-2,7-diyl-co-1,4-benzo-{2,1'-3}-thiadiazole] (PFBT) polymer as the donor. The emission fwhm's of the polymer dots (Pdots) were 37 nm. CL-BODIPY 565 Pdots were about 5 times brighter than commercial quantum dots (Qdots) 565 under identical experimental conditions. Specific cellular targeting indicated that the small, bright, and narrow emissive CL-BODIPY 565 Pdots are promising probes for biological applications.

Semiconducting polymer dots with monofunctional groups.

This communication describes an approach for preparing monovalent semiconducting polymer dots (mPdots) with a size of 5 nm where each mPdot was composed of precisely a single active functional group.

Multicolor fluorescent semiconducting polymer dots with narrow emissions and high brightness.

Fluorescent semiconducting polymer dots (Pdots) have attracted great interest because of their superior characteristics as fluorescent probes, such as high fluorescence brightness, fast radiative rates, and excellent photostability. However, currently available Pdots generally exhibit broad emission spectra, which significantly limit their usefulness in many biological applications involving multiplex detections. Here, we describe the design and development of multicolor narrow emissive Pdots based on different boron dipyrromethene (BODIPY) units. BODIPY-containing semiconducting polymers emitting at multiple wavelengths were synthesized and used as precursors for preparing the Pdots, where intraparticle energy transfer led to highly bright, narrow emissions. The emission full width at half-maximum of the resulting Pdots varies from 40 to 55 nm, which is 1.5-2 times narrower than those of conventional semiconducting polymer dots. BODIPY 520 Pdots were about an order of magnitude brighter than commercial Qdot 525 under identical laser excitation conditions. Fluorescence imaging and flow cytometry experiments indicate that the narrow emissions from these bright Pdots are promising for multiplexed biological detections.

Stable functionalization of small semiconducting polymer dots via covalent cross-linking and their application for specific cellular imaging.

A facile cross-linking strategy covalently links functional molecules to semiconducting polymer dots (Pdots) while simultaneously providing functional groups for biomolecular conjugation. In addition to greatly enhanced stability, the formed Pdots are small (<10 nm), which can be difficult to achieve with current methods but is highly desirable for most biological applications. These characteristics are significant for improving labeling efficiency and sensitivity in cellular assays that employ Pdots.

A new recognition concept using dye sensitized solar cell configuration.

A bifunctional compound 1 was designed and synthesized, in which the donor-π-conjugated-acceptor-cyanoacrylic acid configuration is suited for DSSC, while the tetraoxa-azacrown (donor) part also acts as the recognition unit for e.g. Ca(2+) and the output of DSSC is utilized as signal transduction, demonstrating a new recognition concept using DSSC.