Unexpected Deprotonation from a Chemically Inert OH Group Promoted by Metal Ions in Lanthanide-Erythritol Complexes.

Single-crystal structures of five lanthanide-erythritol complexes are reported. The analysis of the chemical compositions and scrutinization of structural features in the single-crystal data of the complexes led us to find that unexpected deprotonation occurs on the OH group of erythritol of three complexes. Considering these complexes were prepared in acidic environments, where spontaneous ionization on an OH group is suppressed, we suggest metal ions play an important role in promoting the proton transfer. To find out why the chemically inert OH is activated, the single-crystal structures of 63 rare-earth complexes containing organic ligands with multiple hydroxyl groups (OLMHs) were surveyed. The formation of µ2-bridges turns out to be directly relevant to the occurrence of deprotonation. When an OH group from an OLMH molecule participates in the formation of a µ2-bridge, the polarization ability of the metal ions becomes strong enough to promote the deprotonation on the OH group. The above structural characteristics may be useful in the rational design of catalysts that can activate the chemically inert OH group and promote the relevant chemical conversions.

Exciton diffusion in solid solutions of luminescent lanthanide ß-diketonates.

In this article, a series of luminescent lanthanide ß-diketonate solid solutions, with the formula of TBAEuxM1-x(TTA)4 (TBA = tetrabutylammonium; M = La or Gd; TTA = 2-thenoyltrifluoroacetonate), are synthesized by co-precipitation. In the solid solutions, the emission efficiency of Eu3+ is significantly increased with the presence of non-luminescent chelates TBALa(TTA)4 and TBAGd(TTA)4. Low temperature luminescence spectroscopy studies indicate that the TTA- ligands in these non-luminescent chelates do emit phosphorescence with long lifetime. However, the ligand phosphorescence is strongly quenched in solid solutions with the luminescent chelate TBAEu(TTA)4, providing strong evidence for intermolecular energy transfer through the triplet excited states of the ligands. A quantitative analysis of Eu3+ emission enhancement and TTA- phosphorescence quenching reveals that each Eu3+ center may receive excitation energy from about 30 TTA- ligands, suggesting that the excitation energy has become exciton-like in the solid solutions. Based on the crystallography analysis of TBALn(TTA)4, it is discovered that TTA- ligands in neighboring Ln(TTA)4- units may form π-π stacks with intermolecular distance ≤3.5 Å, thus enabling efficient triplet exciton diffusion via exchange interaction.

Sample-Sample Correlation Asynchronous Spectroscopic Method Coupled with Multivariate Curve Resolution-Alternating Least Squares To Analyze Challenging Bilinear Data.

An approach to construct a secondary asynchronous spectrum via sample-sample correlation (SASS) is proposed to analyze bilinear data from hyphenated spectroscopic experiments. In SASS, bilinear data is used to construct a series of two-dimensional (2D) sample-sample correlation spectra. Then a vertical slice is extracted from each 2D sample-sample correlation spectrum so that a secondary 2D asynchronous spectrum is constructed via these slices. The advantage of SASS is demonstrated by a model system with the following challenging situations: (1) Temporal profiles of different components severely overlap, making spectra of pure components difficult to directly obtain from either original bilinear data or multivariate curve resolution-alternating least squares (MCR-ALS) with non-negativity and unimodality constraints. (2) Every peak in the spectra of the eluted samples contains contributions from at least two components. Hence, two-dimensional correlation spectroscopy (2D-COS) and n-dimensional (nD) asynchronous spectroscopic method developed in our previous work, which previously worked so well, are now invalid. SASS managed to reveal different groups of systematic absences of cross peaks (SACPs) that reflect the lack of spectral contributions of different components at different regions in the second asynchronous spectrum. Spectra of different components can still be faithfully retrieved via MCR-ALS calculation using constraints revealed by different groups of SACPs. The results demonstrate that implicit but intrinsic information revealed by SASS is indispensable in solving challenging bilinear data as the model system. We applied SASS on two real-world examples from thermogravimetry-Fourier transform infrared spectroscopy (TG-FT-IR) experiments of mixtures (H2O/HOD/D2O and H2O/isopropanol/pyridine). FT-IR spectra of different components were successfully recovered. Moreover, FT-IR spectrum of HOD, which is difficult to obtain, was successfully extracted. SASS can be applied in the analysis of gaseous mixtures from TG-FT-IR experiment and a combination of quantum cascade lasers with substrate-integrated hollow waveguides in environmental monitoring and biomedical diagnosis. Furthermore, SASS is also useful in various advanced hyphenated spectroscopic experiments.

Novel Method of Constructing Two-Dimensional Correlation Spectroscopy without Subtracting a Reference Spectrum.

In this study, we propose a new approach to generate two-dimension spectra to enhance the intensity of cross peaks relevant to intermolecular interaction. We investigate intermolecular interaction between two solutes (denoted as P and Q, where P has a characteristic peak at XP) dissolved in the same solvent via the near diagonal cross peaks around the coordinate (XP, XP) in a two-dimensional (2D) asynchronous spectrum of generalized spectroscopy. Because of physical constrains in many cases, the variation ranges of the initial concentrations of P or Q must be kept very narrow, leading to very weak cross peak intensities. The weak cross peaks vulnerable to noise bring about difficulty in the investigation of subtle intermolecular interaction. Herein, we propose a new of way constructing a 2D asynchronous spectrum without the subtraction of the average spectrum often used as a reference spectrum. Mathematical analysis and computer simulation demonstrate that the near diagonal cross peaks around the coordinate (XP, XP) in the 2D asynchronous spectrum using the new approach possess two characteristics: (1) they can still reflect an intermolecular interaction reliably; 2) the absolute intensities of the cross peaks are significantly stronger than those generated by the conventional method. We incorporate the novel method with the DAOSD (double asynchronous orthogonal sample design scheme) approach and applied the modified DAOSD approach to study hydrogen bonding behavior in diethyl either/methanol/THF system. The new approach made the weak cross peaks, which are not observable in 2D asynchronous spectrum generated using conventional approach, become observable. The appearance of the cross peak demonstrate that When a small amount of THF is introduced into diethyl solution containing low amount of methanol, THF breaks the methanol-diethyl ether complex and forms methanol-THF complex via new hydrogen bond. This process takes place in spite of the fact that the content of diethyl ether is overwhelmingly larger than that of THF. The above result demonstrates that the new approach described in this article is applicable to enhance intensity of cross peaks in real chemical systems.

Investigation on the Behavior of Noise in Asynchronous Spectra in Generalized Two-Dimensional (2D) Correlation Spectroscopy and Application of Butterworth Filter in the Improvement of Signal-to-Noise Ratio of 2D Asynchronous Spectra.

The behavior of noise in asynchronous spectrum in generalized two-dimensional (2D) correlation spectroscopy is investigated. Mathematical analysis on the noise of 2D spectra and computer simulation on a model system show that the fluctuation of noise in a 2D asynchronous spectrum can be characterized by the standard deviation of noise in 1D spectra. Furthermore, a new approach to improve a signal-to-noise ratio of 2D asynchronous spectrum by a Butterworth filter is developed. A strategy to determine the optimal conditions is proposed. Computer simulation on a model system indicates that the noise of 2D asynchronous spectrum can be significantly suppressed using the Butterworth filtering. In addition, we have tested the approach to a real chemical system where interaction between berberine and ß-cyclodextrin is investigated using 2D UV-vis asynchronous spectra. When artificial noise is added, cross peaks that reflect intermolecular interaction between berberine and ß-cyclodextrin are completely masked by noise. After the method described in this article is utilized, noise is effectively suppressed, and cross peaks are faithfully recovered. The above result demonstrates that the approach described in this article is applicable in real chemical systems.

[Influence of Concentration Sequence on the Signal-to-Noise Ratio of Cross Peaks of 2D Asynchronous Spectra Generated by Using the DAOSD Approach].

In the present work, computer simulation was performed on a model chemical system where two solutes (denoted as P and Q, respectively) are dissolved in the same solution. Under intermolecular interaction between P and Q, part of P undergoes subtle structural variation and converts into U while part of Q converts into V. The strength of intermolecular interaction can be characterized by the corresponding equilibrium constant K. Our preliminary studies indicate that the S/N ratio of cross peak increases considerably as n increases. Moreover, the S/N ratio of the cross peak from the asynchronous spectra can be improved significantly when the suitable concentrations of P and Q are adopted. This work is helpful for a selection of suitable concentration sequence to maximize S/N ratio of cross peaks in the 2D asynchronous spectra generated by using the DAOSD approach proposed in our previous study so that weak intermolecular interaction can be probed.

[On the Tributylphosphate-Based Super-Concentrated HCl System].

We reported a new super-concentrated hydrochloric acid system prepared by using tri-n-butyl phosphate (TBP)-constructed reversed micelles at ambient temperature and pressure. According to the titration result, the molar ratio of H+ to H2O (denoted as nH+/nH2O) in the super-concentrated HCl range from 0.50 to 1.50 which are higher than that in saturated aqueous HCl bulk solution (0.28). Significant a moment of hydrochloric acid is confined in W/O reversed micelles. Therefore, the behavior and status of HCl are different from those of conventional bluk solution. FTIR spectroscopic results demonstrate that a significant amount of HCl remains in the molecular form rather than being ionized into H+ and Cl-. Thus, super-concentrated HCl provides an extraordinary chemical environment which may have significant influence on certain substances. We found that the color of the solution is reddish brown when copper ion is dissolved in super-concentrated HCl, while the color of the saturated HCl aqueous solution (37 Wt%) containing copper ion is green. That is to say, the copper ions exist in a special state under the unique chemical environment of super-concentrated HCl. UV-Vis-NIR spectra indicate that both d-d transition band and charge transfer transition band of copper ions in super-concentrated HCl solution underwent significant variations. In addition, copper ions also have obvious influence on the hydrogen bond network among HCl in the super-concentrated HCl solution. Remarkable variation is introduced in the H-Cl stretching band in FTIR spectra.

[Studies on carbonization of saccharides by using aqueous solution of various acids].

The authors tried to establish an approach to use acids to convert biomass into a fuel with higher carbon content and lower oxygen content in a zero-energy-consumption fashion. Considering that biomass is composed of monosaccharide, we used aqueous solutions of variation acids including hydrochloric acid, sulfuric acid and perchloric acid to treat 2-deoxy-ribose and fructose at ambient temperature and pressure. Black substances were produced after a period of time when 2-deoxy-ribose and fructose were mixed with aqueous solutions containing 8 mol · L(-1) acids. The black substance was collected and characterized by using elemental analysis, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Elemental analysis results indicate that the contents of carbon increases significantly in the black substances in comparison with 2-deoxy-ribose and fructose. Moreover, XPS results indicate that the content of oxygen in the black substance undergoes a significant decrease compared with pure 2-deoxy-ribose and fructose. In the XPS spectra, the is peaks of 2-deoxy-ribose, strong sub peak at 286. 05 eV, which is assigned to carbon linked to oxygen directly, dominate in the C is peak envelop. After treatment by HClO4, the peak decreased dramatically. This result also supports the conclusion that the content of oxygen in mono-saccharide is significantly reduced after treatment by acids. In the FTIR spectra of the black substances, strong peaks can be observed around 1 600 cm(-1), indicating that C==C bond is formed in the product. The above results suggest that treatments with acids may be developed as a new zero-energy-consumption approach to convert biomass in a new fuel with improved energy output efficiency.

Detection of lung cancer tissue by attenuated total reflection-Fourier transform infrared spectroscopy-a pilot study of 60 samples.

BACKGROUND: Attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy could serve as a diagnostic tool for detecting and discriminating different diseases. The aim of this preliminary study was to distinguish malignant and nonmalignant lung tissues with ATR-FTIR spectroscopy. METHODS: Sixty lung tissue samples were obtained from 30 patients who underwent pulmonary lobectomy. Samples were examined with ATR-FTIR spectroscopy before histologic diagnosis. Peak positions, intensities, and full width at half maximum of each absorbent band were measured, and the relative intensity ratios were calculated. Canonical discriminant analysis was performed to discriminate malignant and nonmalignant groups. RESULTS: Twenty-two parameters were significantly different between malignant and nonmalignant groups. Peak intensity at 1546/cm, intensity ratio at 1120/cm, and full width at half maximum at 1303 and 1240/cm were selected as independent factors to form discriminant functions. The sensitivity and specificity of the discriminants were all 96.7%. CONCLUSIONS: ATR-FTIR spectroscopy is a promising method for the detection of malignant lung tissue and could be proved useful in lung tumor surgery.

Sugar-metal ion interactions: the complicated coordination structures of cesium ion with D-ribose and myo-inositol.

The novel cesium chloride-D-ribose complex (CsCl·C5H10O5; Cs-R) and cesium chloride-myo-inositol complex (CsCl·C6H12O6; Cs-I) have been synthesized and characterized using X-ray diffraction and FTIR, FIR, THz, and Raman spectroscopy. Cs(+) is eight-coordinated to three chloride ions, O1 and O2 from one D-ribose molecule, O1 from another D-ribose molecule, and O4 and O5 from the third D-ribose molecule in Cs-R. For one D-ribose molecule, the oxygen atom O1 in the ring is coordinated to two cesium ions as an oxygen bridge, O2 is cocoordinated with O1 to one of the two cesium ions, and O4 and O5 are coordinated to the third cesium ion, respectively. O3 does not coordinate to metal ions and only takes part in forming hydrogen bonds. One chloride ion is connected to three cesium ions. Thus, a complicated structure of Cs-D-ribose forms. For Cs-I, Cs(+) is 10-coordinated to three chloride ions, O1 and O2 from one myo-inositol molecule, O3 and O4 from another myo-inositol molecule, O5 and O6 from the third myo-inositol molecule, and O6 from the fourth myo-inositol molecule. One metal ion is connected to four ligands, and one myo-inositol is coordinated to four Cs(+) ions, which is also a complicated coordination structure. Crystal structure results, FTIR, FIR, THz, and Raman spectra provide detailed information on the structure and coordination of hydroxyl groups to metal ions in the cesium chloride-D-ribose and cesium chloride-myo-inositol complexes.

(Butane-1,2,3,4-tetraol-κ(3) O (1),O (2),O (3))(ethanol-κO)tris-(nitrato-κ(2) O,O')holmium(III).

In the title Ho(III)-erythritol complex, [Ho(NO3)3(C4H10O4)(C2H5OH)], the Ho(III) cation is chelated by a tridentate erythritol ligand and three bidentate nitrate anions. An ethanol mol-ecule further coordinates the Ho(III) cation, completing the irregular O10 coordination geometry. In the crystal, an extensive O-H⋯O hydrogen-bond network links the mol-ecules into a three-dimensional supra-molecular structure.

(Butane-1,2,3,4-tetraol-κ(3) O (1),O (2),O (3))(ethanol-κO)tris-(nitrato-κ(2) O,O')erbium(III).

In the title Er(III)-erythritol complex, [Er(NO3)3(C2H5OH)(C4H10O4)], the Er(III) cation is chelated by one erythritol mol-ecule, three nitrate anions and an ethanol mol-ecule, completing an irregular ErO10 coordination geometry. The Er-O bond lengths are in the range 2.348 (3)-2.583 (3) Å. In the crystal, extensive O-H⋯O hydrogen bonding links the mol-ecules into a three-dimensional supra-molecular structure.

[(2R,3S)-Butane-1,2,3,4-tetraol-κ(3) O (1),O (2),O (3)](ethanol-κO)tris-(nitrato-κ(2) O,O')samarium(III).

The title Sm(III)-erythritol complex, [Sm(NO3)3(C2H6O)(C4H10O4)], is isotypic with its Nd, Eu, Y, Gd, Tb and Ho analogues. The Sm(III) cation exhibits a coordination number of ten and is chelated by a tridentate erythritol ligand and three bidentate nitrate anions. It is additionally coordinated by an O atom of an ethanol mol-ecule, completing an irregular coordination sphere. The Sm-O bond lengths range from 2.416 (2) to 2.611 (2) Å. In the crystal, extensive O-H⋯O hydrogen bonding involving all hy-droxy groups and some of the nitrate O atoms links the mol-ecules into a three-dimensional network.

[Application of FTIR spectrometry to monitoring chemosensitivity of breast cancer cell line using 5-FU].

The purpose of the present study was to compare the changes of infrared spectrum of breast cancer cell line MCF-7 treated by 5-fluorouracil with various concentrations and treating time. The results indicate that the relative intensity ratios of I2 920/I1 460 increased in the FTIR spectra of cell line MCF-7 while I1 400/I1 460, I1 080 /I1 550 and I1 240/I1 550 decreased significantly within forty-eight hours, however, no regular change was observed during 48-72 hours. The relative intensity ratio of I1 640/ I1 550 decreases along with the increase in the concentration of 5-fluorouracil. The changes of infrared spectra are consistent with the biochemical changes in breast cancer cell, and it can be the reference designators when assessing curative effect of breast cancer cell by FTIR spectrometry.

[Investigation of nascent polypropylene in-reactor alloy particles].

Heterogeneous nascent particles were observed in a pilot product of polypropylene in-reactor alloy, which was polymerized by Ziegler-Natta/Metallocene hybrid catalyst using Spheripol technology. Most of the particles in the product are translucent, and opaque particles were observed as well. The differences in morphology, composition, chain structure, thermal properties and mechanical properties between these two kinds of particles were investigated by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), polarized optical microscopy (POM), and differential scanning calorimetry (DSC) techniques. The results of FTIR, NMR and SEM indicate that different morphology of these two different particles is caused by different content of ethylene-propylene copolymers. The results of DSC and POM showed that the translucent particles has higher crystallization rate than opaque particles due to the presence of ethylene-propylene copolymers. The mechanical properties results showed that the impact resistance property of opaque particles is obviously lower than that of translucent particles, while its tensile strength and bending modulus are much higher than that of translucent particles. Based on the process of Spheripol technology, a preliminary explanation for the formation of different nascent PP in-reactor alloy particles is proposed.

[Label-free monitoring 5-FU induced SW 620 cells apoptosis using FTIR microspectroscopy].

The aim of the present study was to evaluate Fourier transform infrared spectroscopy (FTIR) monitoring of biochemical changes in apoptosis cells. Different concentrations of 5-fluorouracil (5-FU) treated colon cancer cell lines SW620 were used to determine the optimum concentration of 5-FU IC50 by means of MTT assay. Cell starvation and 5-Fu synergistic cell cycle arrest was in G1 and S phase. FTIR combined with flow cytometry was applied to analysis of SW 620 cells and SW620 cells treated with 5-FU for 12h, 24h (early apoptosis) and 48 h (late apoptosis) respectively. The peak position and the intensity of all bands were measured and comparison was made between the SW620 and apoptotic SW620 cells. Apoptosis cells have following characteristics compared with SW620 cells (1) The band at 1 740 cm-1 is an C=O stretching vibration. Changes in these bands can reflect lipid changes, and relative peak intensity ratio 11740/11460 significantly increased (p<0. 05), indicating that the relative contents of lipid in apoptosis cells increased. (2) The band at the 1 410 cm-1 peak represents that C-H stretching related was increased to amino acid residues and shifted to higher wave numbers compared to other groups. I1410o/I 460 at early and late death phase was significantly increased, which suggests that the relative contents of amino acid residues in apoptosis cells increased (p <0. 05). New vibrational bands at 1 120 cm-1 appeared at 24 h and increased at 48 h compared with other groups. The 1 120 cm-1 absorption band is mainly due to ser, serine and threonine C-O(H) stretching vibration, and I1120/I 1460 significantly increased (p<0. 05), indicating that the relative quantity of amino acid residues in apoptosis cells increased due to that DNA unwinds the double helix. (3) 1 240 cm-1 is mainly due to the asymmetric stretching modes of phosphodiester groups shifting to higher wave number, illustrating that nucleic acid conformation was changed in apoptosis cells. (4) The band 1 040 cm-1 associated with polysaccharide appeared at 24 and 48 h, meanwhile shifted to higher wave number, suggesting that polysaccharide decreased in late apoptotic cells, and I 1040/I1400 increased at late stage apoptosis, indicating that the relative content of polysaccharide in apoptosis cells increased. The authors' results suggest that FTIR applied to monitoring SW620 cells apoptosis may be as a potential diagnostic tool for cancer chemotherapy monitoring.

The impact of vertical fiscal asymmetry on carbon emissions in China.

Facing the double pressure of promoting economic growth and achieving the goal of "emission peak" by 2030, China must cut down the carbon emission intensity. Focusing on the typical characteristics of China's financial system arrangement, we theoretically analyze the mechanism of vertical fiscal asymmetry affecting carbon emission intensity and use a panel data from 30 Chinese provinces to conduct an empirical examination. The results show that (1) vertical fiscal asymmetry significantly increases the local carbon emission intensity. After a series of robust tests, such as replacement variables and sample data, the conclusion is still valid. (2) The analysis of regional heterogeneity shows that the influence of vertical fiscal asymmetry in carbon emission intensity is the largest in the central area of China, followed by the eastern provinces, and not evident in the western area. The rise in carbon emission intensity brought on by vertical fiscal asymmetry can be successfully reduced by the central transfer payment. The impact of vertical fiscal asymmetry on carbon emission intensity will be greatly lessened when the central transfer payment surpasses the threshold. (3) The mechanism test shows that vertical fiscal asymmetry increases the carbon emissions intensity by three paths: reducing the intensity of environmental regulation, strengthening local governments' dependence on land finance, and local government competition. The above analysis further enriches the relevant research on how China's vertical fiscal asymmetry system affects carbon emission intensity through land finance and local government competition while pointing out the role of transfer payment, and it can help to provide new ideas and empirical evidence for further improving the financial system and promoting the green development of the economy.

Interactions between metal ions and carbohydrates. Spectroscopic characterization and the topology coordination behavior of erythritol with trivalent lanthanide ions.

The coordination of carbohydrate to metal ions is important because it may be involved in many biochemical processes. The synthesis and characterization of several novel lanthanide-erythritol complexes (TbCl(3)·1.5C(4)H(10)O(4)·H(2)O (TbE(I)), Pr(NO(3))(3)·C(4)H(10)O(4)·2H(2)O (PrEN), Ce(NO(3))(3)·C(4)H(10)O(4)·2H(2)O (CeEN), Y(NO(3))(3)·C(4)H(10)O(4)·C(2)H(5)OH (YEN), Gd(NO(3))(3)·C(4)H(10)O(4)·C(2)H(5)OH (GdEN)) and Tb(NO(3))(3)·C(4)H(10)O(4)·C(2)H(5)OH (TbEN) are reported. The structures of these complexes in the solid state have been determined by X-ray diffraction. Erythritol is used as two bidentate ligands or as three hydroxyl group donor in these complexes. FTIR spectra indicate that two kinds of structures, with water and without water involved in the coordination sphere, were observed for lanthanide nitrate-erythritol complexes. FIR and THz spectra show the formation of metal ion-erythritol complexes. Luminescence spectra of Tb-erythritol complexes have the characteristics of the Tb ion.

Double asynchronous orthogonal sample design scheme for probing intermolecular interactions.

This paper introduces a new approach called double asynchronous orthogonal sample design (DAOSD) to probe intermolecular interactions. A specifically designed concentration series is selected according to the mathematical analysis to generate useful 2D correlated spectra. As a result, the interfering portions are completely removed and a pair of complementary sub-2D asynchronous spectra can be obtained. A computer simulation is applied on a model system with two solutes to study the spectral behavior of cross peaks in 2D asynchronous spectra generated by using the DAOSD approach. Variations on different spectral parameters, such as peak position, bandwidth, and absorptivity, caused by intermolecular interactions can be estimated by the characteristic spectral patterns of cross peaks in the pair of complementary sub-2D asynchronous spectra. Intermolecular interactions between benzene and iodine in CCl(4) solutions were investigated using the DAOSD approach to prove the applicability of the DAOSD method in real chemical system.

Identification of colitis and cancer in colon biopsies by Fourier Transform Infrared spectroscopy and chemometrics.

Cancer is a disease that does great harms to the health of human beings. FT-IR spectroscopy could identify variability at the molecular level in biological specimens. It is a rapid and noninvasive method, which could be used intraoperatively to modify surgical procedures. The aim of this paper is to identify and separate cancer from colitis in endoscopic colon biopsies through the use of FT-IR spectroscopy. A total of 88 endoscopic colon samples, including 41 cases of colitis and 47 cases of colon cancer, were obtained. Specimens were placed on an ATR accessory linked to FT-IR spectrometer with a MCT detector for greater stability and sensitivity. Later, specimens were sent for the histological examination as the reference in the spectral analysis. 41 colitis and 47 cancer specimens were compared. Spectra preprocessed with smoothing and normalization were used for discrimination analysis. PCA was processed to simplify the spectrum data set. Naive Bayes classifier model was constructed for diagnostic classification. Leave-one-out cross-validation method was utilized to assess the discrimination results. The sensitivity of FT-IR detection for cancer achieves 97.6%. The results showed that colon cancer could be distinguished from colitis with high accuracy using FT-IR spectroscopy and chemometrics.