Increasingly negative tropical water-interannual CO2 growth rate coupling.

Terrestrial ecosystems have taken up about 32% of the total anthropogenic CO2 emissions in the past six decades1. Large uncertainties in terrestrial carbon-climate feedbacks, however, make it difficult to predict how the land carbon sink will respond to future climate change2. Interannual variations in the atmospheric CO2 growth rate (CGR) are dominated by land-atmosphere carbon fluxes in the tropics, providing an opportunity to explore land carbon-climate interactions3-6. It is thought that variations in CGR are largely controlled by temperature7-10 but there is also evidence for a tight coupling between water availability and CGR11. Here, we use a record of global atmospheric CO2, terrestrial water storage and precipitation data to investigate changes in the interannual relationship between tropical land climate conditions and CGR under a changing climate. We find that the interannual relationship between tropical water availability and CGR became increasingly negative during 1989-2018 compared to 1960-1989. This could be related to spatiotemporal changes in tropical water availability anomalies driven by shifts in El Niño/Southern Oscillation teleconnections, including declining spatial compensatory water effects9. We also demonstrate that most state-of-the-art coupled Earth System and Land Surface models do not reproduce the intensifying water-carbon coupling. Our results indicate that tropical water availability is increasingly controlling the interannual variability of the terrestrial carbon cycle and modulating tropical terrestrial carbon-climate feedbacks.

Soap Film Transfer Printing for Ultrathin Electronics.

Flexible and stretchable electronics have attractive applications inaccessible to conventional rigid electronics. However, the mainstream transfer printing techniques have challenges for electronic films in terms of thickness and size and limitations for target substrates in terms of curvature, depth, and interfacial adhesion. Here a facile, damage-free, and contamination-free soap film transfer printing technique is reported that enables the wrinkle-free transfer of ultrathin electronic films, precise alignment in a transparent manner, and conformal and adhesion-independent printing onto various substrates, including those too topographically and adhesively challenging by existing methods. In principle, not only the pattern, resolution, and thickness of transferred films, but also the curvature, depth, and adhesion of target substrates are unlimited, while the size of transferred films can be as high as meter-scale. To demonstrate the capabilities of soap film transfer printing, pre-fabricated ultrathin electronics with multiple patterns, single micron resolution, sub-micron thickness, and centimeter size are conformably integrated onto the ultrathin web, ultra-soft cotton, DVD-R disk with the minimum radius of curvature of 131 nm, interior cavity of Klein bottle and dandelion with ultralow adhesion. The printed ultrathin sensors show superior conformabilities and robust adhesion, leading to engineering opportunities including electrocardiogram (ECG) signal acquisition and temperature measurement in aqueous environments.

Unraveling Key Factors for Hypoxia Tolerance in Contrasting Varieties of Cotton Rose by Comparative Morpho-physiological and Transcriptome Analysis.

The cotton rose (Hibiscus mutabilis) is a plant species commonly found in tropical and subtropical regions. It is remarkably resilient to waterlogging stress; however, the underlying mechanism behind this trait is yet unknown. This study used hypoxia-tolerant "Danbanhong" (DBH) and more hypoxia-sensitive "Yurui" (YR) genotypes and compared their morpho-physiological and transcriptional responses to hypoxic conditions. Notably, DBH had a higher number of adventitious roots (20.3) compared to YR (10.0), with longer adventitious roots in DBH (18.3 cm) than in YR (11.2 cm). Furthermore, the formation of aerenchyma was 3-fold greater in DBH compared to YR. Transcriptomic analysis revealed that DBH had more rapid transcriptional responses to hypoxia than YR. Identification of a greater number of differentially expressed genes (DEGs) for aerenchyma, adventitious root formation and development, and energy metabolism in DBH supported that DBH had better morphological and transcriptional adaptation than YR. DEG functional enrichment analysis indicated the involvement of variety-specific biological processes in adaption to hypoxia. Plant hormone signaling transduction, MAPK signaling pathway and carbon metabolism played more pronounced roles in DBH, whereas the ribosome genes were specifically induced in YR. These results show that effective multilevel coordination of adventitious root development and aerenchyma, in conjunction with plant hormone signaling and carbon metabolism, is required for increased hypoxia tolerance. This study provides new insights into the characterization of morpho-physiological and transcriptional responses to hypoxia in H. mutabilis, shedding light on the molecular mechanisms of its adaptation to hypoxic environments.

Nanoengineering Ultrathin Flexible Pressure Sensor with Superior Sensitivity and Perfect Conformability.

Flexible pressure sensors play an increasingly important role in a wide range of applications such as human health monitoring, soft robotics, and human-machine interfaces. To achieve a high sensitivity, a conventional approach is introducing microstructures to engineer the internal geometry of the sensor. However, this microengineering strategy requires the sensor's thickness to be typically at hundreds to thousands of microns level, impairing the sensor's conformability on surfaces with microscale roughness like human skin. In this manuscript, a nanoengineering strategy is pioneered that paves a path to resolve the conflicts between sensitivity and conformability. A dual-sacrificial-layer method is initiated that facilitates ease of fabrication and precise assembly of two functional nanomembranes to manufacture the thinnest resistive pressure sensor with a total thickness of ≈850 nm that achieves perfectly conformable contact to human skin. For the first time, the superior deformability of the nanothin electrode layer on a carbon nanotube conductive layer is utilized by the authors to achieve a superior sensitivity (92.11 kPa-1 ) and an ultralow detection limit (<0.8 Pa). This work offers a new strategy that is able to overcome a key bottleneck for current pressure sensors, therefore is of potential to inspire the research community for a new wave of breakthroughs.

Bioinspired Environment-Adaptable and Ultrasensitive Multifunctional Electronic Skin for Human Healthcare and Robotic Sensations.

Multifunctional electronic skins (e-skins) that can sense various stimuli have demonstrated increasing potential in many fields. However, most e-skins are human-oriented that cannot work in hash environments such as high temperature, underwater, and corrosive chemicals, impairing their applications, especially in human-machine interfaces, intelligent machines, robotics, and so on. Inspired by the crack-shaped sensory organs of spiders, an environmentally robust and ultrasensitive multifunctional e-skin is developed. By developing a polyimide-based metal crack-localization strategy, the device has excellent environment adaptability since polyimide has high thermal stability and chemical durability. The localized cracked part serves as an ultrasensitive strain sensing unit, while the non-cracked serpentine part is solely responsible for temperature. Since the two units are made of the same material and process, the signals are decoupled easily. The proposed device is the first multifunctional e-skin that can be used in harsh environments, therefore is of great potential for both human and robot-oriented applications.

Harmonic acoustics for dynamic and selective particle manipulation.

Precise and selective manipulation of colloids and biological cells has long been motivated by applications in materials science, physics and the life sciences. Here we introduce our harmonic acoustics for a non-contact, dynamic, selective (HANDS) particle manipulation platform, which enables the reversible assembly of colloidal crystals or cells via the modulation of acoustic trapping positions with subwavelength resolution. We compose Fourier-synthesized harmonic waves to create soft acoustic lattices and colloidal crystals without using surface treatment or modifying their material properties. We have achieved active control of the lattice constant to dynamically modulate the interparticle distance in a high-throughput (>100 pairs), precise, selective and reversible manner. Furthermore, we apply this HANDS platform to quantify the intercellular adhesion forces among various cancer cell lines. Our biocompatible HANDS platform provides a highly versatile particle manipulation method that can handle soft matter and measure the interaction forces between living cells with high sensitivity.

Recent Advances in Software Tools for More Generic and Precise Intact Glycopeptide Analysis.

Intact glycopeptide identification has long been known as a key and challenging barrier to the comprehensive and accurate understanding the role of glycosylation in an organism. Intact glycopeptide analysis is a blossoming field that has received increasing attention in recent years. MS-based strategies and relative software tools are major drivers that have greatly facilitated the analysis of intact glycopeptides, particularly intact N-glycopeptides. This article provides a systematic review of the intact glycopeptide-identification process using MS data generated in shotgun proteomic experiments, which typically focus on N-glycopeptide analysis. Particular attention is paid to the software tools that have been recently developed in the last decade for the interpretation and quality control of glycopeptide spectra acquired using different MS strategies. The review also provides information about the characteristics and applications of these software tools, discusses their advantages and disadvantages, and concludes with a discussion of outstanding tools.

[Adjuvant rice optimization of rice-steamed Rehmanniae Radix and its anti-osteoporosis effect].

The present study aimed to investigate the effect of various adjuvant rice on the quality of rice-steamed Rehmanniae Radix(RSRR) with Japonica rice, millet, yellow rice, black rice, and glutinous rice as raw materials, and analyze the anti-osteoporosis effect of RSRR by the optimal adjuvant rice. On the basis of the established UPLC-MS/MS method for the determination of the content of catalpol and rehmannioside D, comprehensive weighted scoring method was employed to evaluate the effect of various auxiliary rice on the quality of RSRR with the content of catalpol and rehmannioside D, character score, and taste score as indicators to optimize adjuvant rice. The osteoporosis model was induced by ovariectomy in rats. SD rats were randomly divided into a sham operation group, a model group, a positive control group, and low-dose and high-dose groups of Rehmanniae Radix, RSRR, steamed Rehmanniae Radix, and Epimedii Folium-RSRR. After treatment for 12 weeks, body weight, bone calcium content, and bone mineral density were mea-sured. The results showed that Japonica rice was selected as the optimal adjuvant due to the highest comprehensive score of RSRR steamed by Japonica rice. Rehmanniae Radix, RSRR, steamed Rehmanniae Radix, as well as Epimedii Folium-RSRR, could improve osteoporosis by increasing bone calcium content and bone mineral density. RSRR was superior to Rehmanniae Radix in improving osteo-porosis. However, there was no significant difference between RSRR and steamed Rehmanniae Radix. This study confirmed that Japo-nica rice was the optimal adjuvant rice of RSRR and verified the anti-osteoporosis effect of RSRR, which laid a foundation for further research on the pharmacological action and mechanism of RSRR.

Solid-state harmonics beyond the atomic limit.

Strong-field laser excitation of solids can produce extremely nonlinear electronic and optical behaviour. As recently demonstrated, this includes the generation of high harmonics extending into the vacuum-ultraviolet and extreme-ultraviolet regions of the electromagnetic spectrum. High harmonic generation is shown to occur fundamentally differently in solids and in dilute atomic gases. How the microscopic mechanisms in the solid and the gas differ remains a topic of intense debate. Here we report a direct comparison of high harmonic generation in the solid and gas phases of argon and krypton. Owing to the weak van der Waals interaction, rare (noble)-gas solids are a near-ideal medium in which to study the role of high density and periodicity in the generation process. We find that the high harmonic generation spectra from the rare-gas solids exhibit multiple plateaus extending well beyond the atomic limit of the corresponding gas-phase harmonics measured under similar conditions. The appearance of multiple plateaus indicates strong interband couplings involving multiple single-particle bands. We also compare the dependence of the solid and gas harmonic yield on laser ellipticity and find that they are similar, suggesting the importance of electron-hole recollision in these solids. This implies that gas-phase methods such as polarization gating for attosecond pulse generation and orbital tomography could be realized in solids.

[Processing technology of rice-steamed Rehmanniae Radix unearthed from tomb of Haihunhou in the Western Han Dynasty].

With the rice-steamed Rehmanniae Radix unearthed from the tomb of Haihunhou in the Western Han Dynasty as the re-ference, the present study evaluated the quality of Rehmanniae Radix and investigated the processing technology of rice-steamed Rehmanniae Radix to lay the foundation for the research on rice-steamed Rehmanniae Radix products. With catalpol and rehmannioside D as the investigation indexes, the quality and grade of Rehmanniae Radix from different producing areas were evaluated with the methods in 2020 edition of Chinese Pharmacopoeia. UPLC method was established for the determination of catalpol and rehmannioside D in the rice-steamed Rehmanniae Radix. The effects of steaming time, the amount of supplementary rice, and steaming times in the rice-steamed processing on the quality of products were investigated by L_9(3~4) orthogonal test and multi-index comprehensive balance scoring method combined with the content of catalpol and rehmannioside D and appearance characteristics. At last, the stability of the processing technology was tested. The results showed that the optimal processing technology for rice-steamed Rehmanniae Radix was as follows: Rehmanniae Radix and rice(200 g∶4 g) were steamed twice at atmospheric pressure, four hours each time. The mass fractions of catalpol and rehmannioside D were 0.184% and 0.335%, respectively, and the character score was 6.5. The processing conditions are reaso-nable, stable, and feasible. It can provide a basis for the restoration of the ancient rice-steamed processing technology and references for the development of rice-steamed Rehmanniae Radix products in the future.

Effective Enrichment Strategy Using Boronic Acid-Functionalized Mesoporous Graphene-Silica Composites for Intact N- and O-Linked Glycopeptide Analysis in Human Serum.

The heterogeneity and low abundance of protein glycosylation present challenging barriers to the analysis of intact glycopeptides, which is key to comprehensively understanding the role of glycosylation in an organism. Efficient and specific enrichment of intact glycopeptides could help greatly with this problem. Here, we propose a new enrichment strategy using a boronic acid (BA)-functionalized mesoporous graphene-silica composite (denoted as GO@mSiO2-GLYMO-APB) for isolating intact glycopeptides from complex biological samples. The merits of this composite, including high surface area and synergistic effect from size exclusion functionality of mesoporous material, hydrophilic interaction of silica, and the reversible covalent binding with BA, enable the effective and specific enrichment of both intact N- and O-glycopeptides. The results from the enrichment performance of the strategy evaluated by standard glycoproteins and the application to global N- and O-glycosylation analyses in human serum indicate the robustness and potential of the strategy for intact glycopeptide analysis.

Ultrasensitive Multiparameter Phenotyping of Rare Cells Using an Integrated Digital-Molecular-Counting Microfluidic Well Plate.

Integrated microfluidic cellular phenotyping platforms provide a promising means of studying a variety of inflammatory diseases mediated by cell-secreted cytokines. However, immunosensors integrated in previous microfluidic platforms lack the sensitivity to detect small signals in the cellular secretion of proinflammatory cytokines with high precision. This limitation prohibits researchers from studying cells secreting cytokines at low abundance or existing at a small population. Herein, the authors present an integrated platform named the "digital Phenoplate (dPP)," which integrates digital immunosensors into a microfluidic chip with on-chip cell assay chambers, and demonstrates ultrasensitive cellular cytokine secretory profile measurement. The integrated sensors yield a limit of detection as small as 0.25 pg mL-1 for mouse tumor necrosis factor alpha (TNF-α). Each on-chip cell assay chamber confines cells whose population ranges from ≈20 to 600 in arrayed single-cell trapping microwells. Together, these microfluidic features of the dPP simultaneously permit precise counting and image-based cytometry of individual cells while performing parallel measurements of TNF-α released from rare cells under multiple stimulant conditions for multiple samples. The dPP platform is broadly applicable to the characterization of cellular phenotypes demanding high precision and high throughput.

Enhancing vigilance for cerebral air embolism after pneumonectomy: a case report.

BACKGROUND: Vascular air embolism (VAE) is a rare but important complication that has not been paid enough attention to in the medical process such as surgery and anesthesia. CASE PRESENTATION: We report for the first time that a 54-year-old male patient with central lung cancer developed severe complications of CAE after right pneumonectomy. After targeted first-aid measures such as assisted breathing, mannitol dehydration and antibiotic treatment, the patient gradually improved. The patient became conscious at discharge after 25 days of treatment but left limb was left with nerve injury symptoms. CONCLUSION: We analyzed the possible causes of CAE in this case, and the findings from this report would be highly useful as a reference to clinicians.

Development of a Computational Tool for Automated Interpretation of Intact O-Glycopeptide Tandem Mass Spectra from Single Proteins.

Precise and automated analysis of site-specific O-glycosylation on single proteins is crucial for comprehensive characterization of some important glycoproteins, such as tumor biomarkers and recombinant drug proteins. Mass spectrometry has been proven to be a powerful technique for protein sequencing and N-glycosylation analysis. However, challenges remain in developing computational tools for intact O-glycopeptide analysis, which has greatly hindered the development of mass-spectrometry-based O-glycosylation analysis. Herein, an integrated strategy together with a dedicated automated computational tool termed AOGP was developed for intact O-glycopeptide analysis on single proteins. AOGP utilized de novo sequencing for O-glycans and a database search strategy for peptide backbones. The false discovery rate (FDR) of the identification results was controlled and validated by a mixed Gaussian distribution estimation method. AOGP exhibited superior performance in identifying intact O-glycopeptides of the human erythropoietin with a total of 188 O-glycopeptide spectra reported under 1% FDR. AOGP is developed in Python, is fully open-sourced, and is equipped with a user-friendly interface. Such an easy-operating and robust tool would greatly facilitate O-glycosylation analysis on single proteins in tumor biomarker and recombinant drug protein development.

Novel methods in glycomics: a 2019 update.

Introduction: Glycomics, which aims to define the glycome of a biological system to better assess the biological attributes of the glycans, has attracted increasing interest. However, the complexity and diversity of glycans present challenging barriers to glycome definition. Technological advances are major drivers in glycomics.Areas covered: This review summarizes the main methods and emphasizes the most recent advances in mass spectrometry-based methods regarding glycomics following the general workflow in glycomic analysis.Expert opinion: Recent mass spectrometry-based technological advances have significantly lowered the barriers in glycomics. The field of glycomics is moving toward both generic and precise analysis.

Acoustic Cell Separation Based on Density and Mechanical Properties.

Density and mechanical properties (e.g., compressibility or bulk modulus) are important cellular biophysical markers. As such, developing a method to separate cells directly based on these properties can benefit various applications including biological research, diagnosis, prognosis, and therapeutics. As a potential solution, surface acoustic wave (SAW)-based cell separation has demonstrated advantages in terms of biocompatibility and compact device size. However, most SAW-reliant cell separations are achieved using an entangled effect of density, various mechanical properties, and size. In this work, we demonstrate SAW-based separation of cells/particles based on their density and compressibility, irrespective of their sizes, by manipulating the acoustic properties of the fluidic medium. Using our platform, SAW-based separation is achieved by varying the dimensions of the microfluidic channels, the wavelengths of acoustic signals, and the properties of the fluid media. Our method was applied to separate paraformaldehyde-treated and fresh Hela cells based on differences in mechanical properties; a recovery rate of 85% for fixed cells was achieved. It was also applied to separate red blood cells (RBCs) and white blood cells (WBCs) which have different densities. A recovery rate of 80.5% for WBCs was achieved.

Isolation of exosomes from whole blood by integrating acoustics and microfluidics.

Exosomes are nanoscale extracellular vesicles that play an important role in many biological processes, including intercellular communications, antigen presentation, and the transport of proteins, RNA, and other molecules. Recently there has been significant interest in exosome-related fundamental research, seeking new exosome-based biomarkers for health monitoring and disease diagnoses. Here, we report a separation method based on acoustofluidics (i.e., the integration of acoustics and microfluidics) to isolate exosomes directly from whole blood in a label-free and contact-free manner. This acoustofluidic platform consists of two modules: a microscale cell-removal module that first removes larger blood components, followed by extracellular vesicle subgroup separation in the exosome-isolation module. In the cell-removal module, we demonstrate the isolation of 110-nm particles from a mixture of micro- and nanosized particles with a yield greater than 99%. In the exosome-isolation module, we isolate exosomes from an extracellular vesicle mixture with a purity of 98.4%. Integrating the two acoustofluidic modules onto a single chip, we isolated exosomes from whole blood with a blood cell removal rate of over 99.999%. With its ability to perform rapid, biocompatible, label-free, contact-free, and continuous-flow exosome isolation, the integrated acoustofluidic device offers a unique approach to investigate the role of exosomes in the onset and progression of human diseases with potential applications in health monitoring, medical diagnosis, targeted drug delivery, and personalized medicine.

Straightforward and Highly Efficient Strategy for Hepatocellular Carcinoma Glycoprotein Biomarker Discovery Using a Nonglycopeptide-Based Mass Spectrometry Pipeline.

Efficient detection of aberrant glycoproteins in serum is particularly important for biomarker discovery. However, direct quantitation of glycoproteins in serum remains technically challenging because of the extraordinary complexity of the serum proteome. In the current work, we proposed a straightforward and highly efficient strategy by using the nonglycopeptides releasing from the specifically enriched glycoproteins for targeted glycoprotein quantification. With this so-called nonglycopeptide-based mass spectrometry (NGP-MS) strategy, a powerful and nondiscriminatory pipeline for hepatocellular carcinoma (HCC) glycoprotein biomarker discovery, verification, and validation has been developed. First, a data set of 234 NGPs was strictly established for multiple-reaction monitoring (MRM) quantification in serum. Second, the NGPs enriched from 20 HCC serum mixtures and 20 normal serum mixtures were labeled with mTRAQ reagents (Δ0 and Δ8, respectively) to find the differentially expressed glycoproteins in HCC. A total of 97 glycoprotein candidates were preliminarily screened and submitted for absolute quantitation with NGP-based stable-isotope-labeled (SID)-MRM in the individual samples of 38 HCC serum and 24 normal controls. Finally, 21 glycoproteins were absolutely quantified with high quality. The diagnostic sensitivity results showed that three glycoproteins, ß-2-glycoprotein 1 (APOH), α-1-acid glycoprotein 2 (ORM2), and complement C3 (C3), could be used for the discrimination between HCC patients and healthy people. A novel glycoprotein biomarker panel [APOH, ORM2, C3, and α-fetoprotein (AFP)] has proven to outperform AFP, the known HCC serum biomarker, alone, in this study. We believe that this strategy and the panel of glycoproteins might hold great clinical value for HCC detection in the future.

Standing Surface Acoustic Wave (SSAW)-Based Fluorescence-Activated Cell Sorter.

Microfluidic fluorescence-activated cell sorters (µFACS) have attracted considerable interest because of their ability to identify and separate cells in inexpensive and biosafe ways. Here a high-performance µFACS is presented by integrating a standing surface acoustic wave (SSAW)-based, 3D cell-focusing unit, an in-plane fluorescent detection unit, and an SSAW-based cell-deflection unit on a single chip. Without using sheath flow or precise flow rate control, the SSAW-based cell-focusing technique can focus cells into a single file at a designated position. The tight focusing of cells enables an in-plane-integrated optical detection system to accurately distinguish individual cells of interest. In the acoustic-based cell-deflection unit, a focused interdigital transducer design is utilized to deflect cells from the focused stream within a minimized area, resulting in a high-throughput sorting ability. Each unit is experimentally characterized, respectively, and the integrated SSAW-based FACS is used to sort mammalian cells (HeLa) at different throughputs. A sorting purity of greater than 90% is achieved at a throughput of 2500 events s-1 . The SSAW-based FACS is efficient, fast, biosafe, biocompatible and has a small footprint, making it a competitive alternative to more expensive, bulkier traditional FACS.

Circulating Tumor Cell Phenotyping via High-Throughput Acoustic Separation.

The study of circulating tumor cells (CTCs) offers pathways to develop new diagnostic and prognostic biomarkers that benefit cancer treatments. In order to fully exploit and interpret the information provided by CTCs, the development of a platform is reported that integrates acoustics and microfluidics to isolate rare CTCs from peripheral blood in high throughput while preserving their structural, biological, and functional integrity. Cancer cells are first isolated from leukocytes with a throughput of 7.5 mL h-1 , achieving a recovery rate of at least 86% while maintaining the cells' ability to proliferate. High-throughput acoustic separation enables statistical analysis of isolated CTCs from prostate cancer patients to be performed to determine their size distribution and phenotypic heterogeneity for a range of biomarkers, including the visualization of CTCs with a loss of expression for the prostate specific membrane antigen. The method also enables the isolation of even rarer, but clinically important, CTC clusters.