Synthesis of textured discontinuous-nanoisland Ca3Co4O9 thin films.

Controllable engineering of the nanoporosity in layered Ca3Co4O9 remains a challenge. Here, we show the synthesis of discontinuous films with islands of highly textured Ca3Co4O9, effectively constituting distributed nanoparticles with controlled porosity and morphology. These discontinuously dispersed textured Ca3Co4O9 nanoparticles may be a candidate for hybrid thermoelectrics.

Mechanically Flexible Thermoelectric Hybrid Thin Films by Introduction of PEDOT:PSS in Nanoporous Ca3Co4O9.

Nanoporous Ca3Co4O9 exhibits high thermoelectric properties and low thermal conductivity and can be made mechanically flexible by nanostructural design. To improve the mechanical flexibility with retained thermoelectric properties near room temperature, however, it is desirable to incorporate an organic filler in this nanoporous inorganic matrix material. Here, double-layer nanoporous Ca3Co4O9/PEDOT:PSS thin films were synthesized by spin-coating PEDOT:PSS into the nanopores. The obtained hybrid films exhibit high Seebeck coefficient (∼+130 µV/K) and thermoelectric power factor (0.75 µW cm-1 K-2) at room temperature with no deterioration in electrical properties after cyclic bending tests (98% preservation of electrical conductivity after 1000 cycles bending to a bending radius of 3 mm). Compared with the nanoporous Ca3Co4O9 thin film, the mechanical flexibility of the hybrid film can be effectively improved after hybrid with PEDOT:PSS with only a slight decrease of the thermoelectric properties.

Engineering thermoelectric and mechanical properties by nanoporosity in calcium cobaltate films from reactions of Ca(OH)2/Co3O4 multilayers.

Controlling nanoporosity to favorably alter multiple properties in layered crystalline inorganic thin films is a challenge. Here, we demonstrate that the thermoelectric and mechanical properties of Ca3Co4O9 films can be engineered through nanoporosity control by annealing multiple Ca(OH)2/Co3O4 reactant bilayers with characteristic bilayer thicknesses (b t ). Our results show that doubling b t , e.g., from 12 to 26 nm, more than triples the average pore size from ∼120 nm to ∼400 nm and increases the pore fraction from 3% to 17.1%. The higher porosity film exhibits not only a 50% higher electrical conductivity of σ ∼ 90 S cm-1 and a high Seebeck coefficient of α ∼ 135 µV K-1, but also a thermal conductivity as low as κ ∼ 0.87 W m-1 K-1. The nanoporous Ca3Co4O9 films exhibit greater mechanical compliance and resilience to bending than the bulk. These results indicate that annealing reactant multilayers with controlled thicknesses is an attractive way to engineer nanoporosity and realize mechanically flexible oxide-based thermoelectric materials.

Mechanochemical Formation of Protein Nanofibril: Graphene Nanoplatelet Hybrids and Their Thermoelectric Properties.

Hybrids between biopolymeric materials and low-cost conductive carbon-based materials are interesting materials for applications in electronics, potentially reducing the need for materials that generate environmentally harmful electronic waste. Herein we investigate a scalable ball-milling method to form graphene nanoplatelets (GNPs) by milling graphite flakes with aqueous dispersions of proteins or protein nanofibrils (PNFs). Aqueous GNP dispersions with high concentrations (up to 3.2 mg mL-1) are obtained under appropriate conditions. The PNFs/proteins help to exfoliate graphite and stabilize the resulting GNP dispersions by electrostatic repulsion. PNFs are prepared from hen egg white lysozyme (HEWL) and ß-lactoglobulin (BLG). The GNP dispersions can be processed into free-standing films having an electrical conductivity of up to 110 S m-1. Alternatively, the GNP dispersions can be drop-cast on PET substrates, resulting in mechanically flexible films having an electrical conductivity of up to 65 S m-1. The drop-cast films are investigated regarding their thermoelectric properties, having Seebeck coefficients of about 50 µV K-1. By annealing drop-cast films and thus carbonizing residual PNFs, an increase of electrical conductivity, coupled with a modest decrease in Seebeck coefficient, is obtained resulting in materials displaying power factors of up to 4.6 µW m-1 K-2.