RESUMEN
Pasteurella multocida type A (PmA) mainly causes respiratory diseases such as pneumonia in bovines, leading to great economic losses to the breeding industry. At present, there is still no effective commercial vaccine against PmA infection. In this study, a mutant strain (PmCQ2Δ4555-4580) with brand-new phenotypes was obtained after serially passaging at 42 °C. Whole genome resequencing and PCR analysis showed that PmCQ2Δ4555-4580 missed six genes, including PmCQ2_004555, PmCQ2_004560, PmCQ2_004565, PmCQ2_004570, PmCQ2_004575, and PmCQ2_004580. Importantly, the virulence of PmCQ2Δ4555-4580 was reduced by approximately 2.8 × 109 times in mice. Notably, live PmCQ2Δ4555-4580 could provide 100%, 100% and 40% protection against PmA, PmB and PmF, respectively; and inactivated PmCQ2Δ4555-4580 could provide 100% and 87.5% protection against PmA and PmB. Interestingly, immune protection-related proteins were significantly upregulated in PmCQ2Δ4555-4580 based on RNA-seq and bioinformatics analysis. Meaningfully, by in vitro expression, purification and in vivo immunization, 12 proteins had different degrees of immune protective effects. Among them, PmCQ2_008205, PmCQ2_010435, PmCQ2_008190, and PmCQ2_004170 had the best protective effect, the protection rates against PmA were 50%, 40%, 30%, and 30%, respectively, and the protective rates against PmB were 62.5%, 42.9%, 37.5%, and 28.6%, respectively. Collectively, PmCQ2Δ4555-4580 is a potential vaccine candidate for the prevention of Pasteurellosis involving in high expression of immune protective related proteins.
Asunto(s)
Enfermedades de los Bovinos , Infecciones por Pasteurella , Pasteurella multocida , Enfermedades de los Roedores , Animales , Ratones , Bovinos , Pasteurella multocida/genética , Vacunas Atenuadas , Infecciones por Pasteurella/prevención & control , Infecciones por Pasteurella/veterinaria , Inmunización/veterinaria , Vacunación/veterinaria , Vacunas BacterianasRESUMEN
To achieve high-precision geomagnetic matching navigation, a reliable geomagnetic anomaly basemap is essential. However, the accuracy of the geomagnetic anomaly basemap is often compromised by noise data that are inherent in the process of data acquisition and integration of multiple data sources. In order to address this challenge, a denoising approach utilizing an improved multiscale wavelet transform is proposed. The denoising process involves the iterative multiscale wavelet transform, which leverages the structural characteristics of the geomagnetic anomaly basemap to extract statistical information on model residuals. This information serves as the a priori knowledge for determining the Bayes estimation threshold necessary for obtaining an optimal wavelet threshold. Additionally, the entropy method is employed to integrate three commonly used evaluation indexes-the signal-to-noise ratio, root mean square (RMS), and smoothing degree. A fusion model of soft and hard threshold functions is devised to mitigate the inherent drawbacks of a single threshold function. During denoising, the Elastic Net regular term is introduced to enhance the accuracy and stability of the denoising results. To validate the proposed method, denoising experiments are conducted using simulation data from a sphere magnetic anomaly model and measured data from a Pacific Ocean sea area. The denoising performance of the proposed method is compared with Gaussian filter, mean filter, and soft and hard threshold wavelet transform algorithms. The experimental results, both for the simulated and measured data, demonstrate that the proposed method excels in denoising effectiveness; maintaining high accuracy; preserving image details while effectively removing noise; and optimizing the signal-to-noise ratio, structural similarity, root mean square error, and smoothing degree of the denoised image.
RESUMEN
Osmotic power, a clean energy source, can be harvested from the salinity difference between seawater and river water. However, the output power densities are hampered by the trade-off between ion selectivity and ion permeability. Here we propose an effective strategy of double angstrom-scale confinement (DAC) to design ion-permselective channels with enhanced ion selectivity and permeability simultaneously. The fabricated DAC-Ti0.87 O2 membranes possess both Ti atomic vacancies and an interlayer free spacing of ≈2.2â Å, which not only generates a profitable confinement effect for Na+ ions to enable high ion selectivity but also induces a strong interaction with Na+ ions to benefit high ion permeability. Consequently, when applied to osmotic power generation, the DAC-Ti0.87 O2 membranes achieved an ultrahigh power density of 17.8â W m-2 by mixing 0.5/0.01â M NaCl solution and up to 114.2â W m-2 with a 500-fold salinity gradient, far exceeding all the reported macroscopic-scale membranes. This work highlights the potential of the construction of DAC ion-permselective channels for two-dimensional materials in high-performance nanofluidic energy systems.
RESUMEN
Mg-Ca alloys have emerged as a promising research direction for biomedical implants in the orthopedic field. However, their clinical use is deterred by their fast corrosion rate. In this work, a pH stimuli-responsive silk-halloysite (HNT)/phytic acid (PA) self-healing coating (Silk-HNT/PA) is constructed to slow down the corrosion rate of Mg-1Ca alloy and its cell viability and osteogenic differentiation ability are enhanced. The Silk-HNT/PA coating exhibits appealing active corrosion protection, by eliciting pH-triggerable self-healing effects, while simultaneously affording superior biocompatibility and osteogenic differentiation ability. Moreover, in vivo studies by histological analysis also demonstrate better osseointegration for the Silk-HNT/PA coated Mg-1Ca alloy. In summary, the Silk-HNT/PA coating in the present study has great potential in enhancing the biomedical utility of Mg alloys.
Asunto(s)
Magnesio , Osteogénesis , Aleaciones , Materiales Biocompatibles Revestidos/farmacología , Corrosión , Concentración de Iones de Hidrógeno , SedaRESUMEN
Flexible and wearable electronics have recently sparked intense interest in both academia and industry because they can greatly revolutionize human lives by impacting every aspect of our daily routine. Therefore, developing compatible energy storage devices has become one of the most important research frontiers in this field. Particularly, the development of flexible electrodes is of great significance when considering their essential role in the performance of these devices. Although there is no doubt that transition metal oxide nanomaterials are suitable for providing electrochemical energy storage, individual oxides generally cannot be developed into freestanding electrodes because of their intrinsically low mechanical strength.Two-dimensional sheets with genuine unilamellar thickness are perfect units for the assembly of freestanding and mechanically flexible devices, as they have the advantages of low thickness and good flexibility. Therefore, the development of metal oxide materials into a two-dimensional sheet morphology analogous to graphene is expected to solve the above-mentioned problems. In this Account, we summarize the recent progress on two-dimensional molecular sheets of transition metal oxides for wearable energy storage applications. We start with our understanding of the principle of producing two-dimensional metal oxides from their bulk-layered counterparts. The unique layered structure of the precursors inspired the exploration of their interlayer chemistry, which helps us to understand the processes of swelling and delamination. Rational methods for tuning the chemical composition, size/thickness, and surface chemistry of the obtained nanosheets and how physicochemical properties of the nanosheets can be modulated are then briefly introduced. Subsequently, the orientational alignment of the anisotropic sheets and the origins of their liquid-crystalline characteristics are discussed, which are of vital importance for their subsequent macroscopic assembly. Finally, macroscopic electrodes with geometric diversity ranging from one-dimensional macroscopic fibers to two-dimensional films/papers and three-dimensional monolithic foams are summarized. The intrinsically low mechanical stiffness of metal oxide sheets can be effectively overcome by wisely designing the assembly mode and sheet interfaces to obtain decent mechanical properties integrated with superior electrochemical performance, thereby providing critical advantages for the fabrication of wearable energy storage devices.We expect that this Account will stimulate further efforts toward fundamental research on interface engineering in metal oxide sheet assembly and facilitate wide applications of their designed assemblies in future new-concept energy conversion devices and beyond. In the foreseeable future, we believe that there will be a big explosion in the application of transition metal oxide sheets in flexible electronics.
RESUMEN
With the ever-increasing growth in next-generation flexible and wearable electronics, fiber-shaped zinc-air batteries have attracted considerable attention due to their advantages of high energy density and low cost, though their development, however, has been seriously hampered by the unavailability of efficient electrocatalysts. In this work, we designed a trimetallic nitride electrocatalyst in an unusual molecular sheet form, which was stabilized by metallic titanium carbide sheets. Besides the expected elevation in catalytic activity toward the oxygen evolution reaction, the material simultaneously unlocked excellent catalytic activity for oxygen reduction reaction with the half-wave potential as small as 0.84 V. A flexible fiber-shaped zinc-air battery, employing the designed electrocatalyst as the air cathode and a gel as the electrolyte, demonstrated an enhanced and durable electrochemical performance, outputting a competitive energy density of 627 Wh kgzn-1. This work opens new avenues for utilizing two-dimensional sheets in future wearable and portable device applications.
RESUMEN
BACKGROUND: Esophageal squamous cell carcinoma (ESCC) at pN0M0 can be more locally aggressive and disseminated than those with lymph node and distant metastasis. Perineural invasion (PNI) is reported as a poor prognostic factor in cancer and is thought to be related to regional tumor spread and metastasis. However, its clinicopathological role and meaning for treatment in pN0M0 ESCC are unknown. PATIENTS AND METHODS: We applied scoring methods of PNI and lymphatic and vascular invasion (LI, VI) based on immunohistochemistry staining on tumor tissues of pN0M0 ESCC patients. ROC analyses, Kaplan-Meier analyses, Cox regression, and χ2 test were performed for survival analysis, comparison of PNI with LI and VI, and exploration of the relevance between PNI and other clinicopathological features. RESULTS: Presence of PNI was significantly associated with poor survival in pN0M0 patients, whereas LI and VI were not predictive of outcome (P > 0.05). Neural invasion index (NII), defined as the ratio of the number of tumor-invaded nerves to the total number of nerves per tumor microsection, was the most consistent measure of PNI (P = 0.006, HR = 6.892, 1.731-27.428). Postoperative radiotherapy significantly improved survival in high-NII patients (P = 0.035, HR = 0.390, 0.163-0.936). CONCLUSIONS: PNI is an important risk factor for the outcome of pN0M0 ESCC patients. NII can be used for risk assessment and to tailor adjuvant radiotherapy in this population.
Asunto(s)
Neoplasias Esofágicas , Carcinoma de Células Escamosas de Esófago , Nervios Periféricos , Neoplasias Esofágicas/patología , Neoplasias Esofágicas/terapia , Carcinoma de Células Escamosas de Esófago/patología , Carcinoma de Células Escamosas de Esófago/terapia , Humanos , Metástasis Linfática , Invasividad Neoplásica , Estadificación de Neoplasias , Nervios Periféricos/patología , Pronóstico , Estudios RetrospectivosRESUMEN
Molecular-scale modulation of interfaces between different unilamellar nanosheets in superlattices is promising for efficient catalytic activities. Here, three kinds of superlattices from alternate restacking of any two of the three unilamellar nanosheets of MoS2, NiFe-layered double hydroxide (NiFe-LDH), and graphene are systematically investigated for electrocatalytic water splitting. The MoS2/NiFe-LDH superlattice exhibits a low overpotential of 210 and 110 mV at 10 mA cm-2 for oxygen evolution reaction (OER) and alkaline hydrogen evolution reaction (HER), respectively, superior than MoS2/graphene and NiFe-LDH/graphene superlattices. High activity and stability toward the overall water splitting are also demonstrated on the MoS2/NiFe-LDH superlattice bifunctional electrocatalyst, outperforming the commercial Pt/C-RuO2 couple. This outstanding performance can be attributed to optimal adsorption energies of both HER and OER intermediates on the MoS2/NiFe-LDH superlattice, which originates from a strong electronic coupling effect at the heterointerfaces. These results herald the interface modulation of superlattices providing a promising approach for designing advanced electrocatalysts.
RESUMEN
INTRODUCTION: Two methods were compared for evaluating the sigma metrics of clinical biochemistry tests using two different allowable total error (TEa) specifications. MATERIALS AND METHODS: The imprecision (CV%) and bias (bias%) of 19 clinical biochemistry analytes were calculated using a trueness verification proficiency testing (TPT)-based approach and an internal quality control data inter-laboratory comparison (IQC)-based approach, respectively. Two sources of total allowable error (TEa), the Clinical Laboratory Improvement Amendments of 1988 (CLIA '88) and the People's Republic of China Health Industry Standard (WS/T 403-2012), were used to calculate the sigma metrics (σCLIA, σWS/T ). Sigma metrics were calculated to provide a single value for assessing the quality of each test based on a single concentration level. RESULTS: For both approaches, σCLIA > σWS/T in 18 out of 19 assays. For the TPT-based approach, 16 assays showed σCLIA > 3, and 12 assays showed σWS/T > 3. For the IQC-based approach, 19 and 16 assays showed σCLIA > 3 and σWS/T > 3, respectively. CONCLUSIONS: Both methods can be used as references for calculating sigma metrics and designing QC schedules in clinical laboratories. Sigma metrics should be evaluated comprehensively by different approaches.
Asunto(s)
Ensayos de Aptitud de Laboratorios/normas , Estadística como Asunto , Bioensayo , Humanos , Control de Calidad , Reproducibilidad de los ResultadosRESUMEN
BACKGROUND: Low concentration C-reactive protein (CRP) has favorable prognostic significance in patients with cardiovascular risks. METHODS: We compared the wr-CRP method with the hs-CRP method both on Roche Cobas c702 analyzer for the determination of low CRP concentration (<20 mg/L) including 200 patients treated in Cardiology Department in Beijing Tsinghua Changgung Hospital (Beijing, China) from December 2018 to March 2019. RESULTS: The two methods were highly correlated (Spearman's rho = 0.995). Deming regression was used to fit the regression analysis model, giving a slope of 1.058 with an intercept of 0.008. The median method difference (wr-CRP - hr-CRP) was 0.120 mg/L (95% CI, 0.086-0.200 mg/L), and the median percent differences were 7.34% (95% CI, 4.27%-8.47%). The percent bias between both methods at the given cutoff CRP values of 1, 3, and 10 mg/L evaluated by Deming regression was 6.60%, 6.07%, and 5.88%, respectively, all of which were less than the acceptable standard (12.50%). The percentage of sample results concordant by both methods for the risk stratification was 96.0% (kappa = 0.937, P < 0.001). CONCLUSIONS: Roche wr-CRP and hs-CRP assays are highly concordant in determining low concentration CRP. Wr-CRP may be used as an alternative to hs-CRP assay on Roche Cobas c702 analyzer to assess the cardiovascular risk, considering its convenience and lower costs.
Asunto(s)
Biomarcadores/sangre , Proteína C-Reactiva/análisis , Enfermedades Cardiovasculares/etiología , Pruebas Diagnósticas de Rutina/métodos , Tamizaje Masivo/métodos , Adulto , Enfermedades Cardiovasculares/sangre , Enfermedades Cardiovasculares/epidemiología , China/epidemiología , Pruebas Diagnósticas de Rutina/clasificación , Femenino , Humanos , Incidencia , Masculino , Persona de Mediana Edad , Pronóstico , Factores de RiesgoRESUMEN
Detecting oil slick covered seawater surface using the thermal infrared remote sensing technology exists the advantages such as: oil spill detection with thermal infrared spectrum can be performed in the nighttime which is superior to visible spectrum, the thermal infrared spectrum is superior to detect the radiation characteristics of both the oil slick and the seawater compared to the mid-wavelength infrared spectrum and which have great potential to detect the oil slick thickness. And the emissivity is the ratio of the radiation of an object at a given temperature in normal range of the temperature (260-320 K) and the blackbody radiation under the same temperature , the emissivity of an object is unrelated to the temperature, but only is dependent with the wavelength and material properties. Using the seawater taken from Bohai Bay and crude oil taken from Gudao oil production plant of Shengli Oilfield in Dongying city of Shandong Province, an experiment was designed to study the characteristics and mechanism of thermal infrared emissivity spectrum of artificial crude oil slick covered seawater surface with its thickness. During the experiment, crude oil was continuously dropped into the seawater to generate artificial oil slick with different thicknesses. By adding each drop of crude oil, we measured the reflectivity of the oil slick in the thermal infrared spectrum with the Fourier transform infrared spectrometer (102F) and then calculated its thermal infrared emissivity. The results show that the thermal infrared emissivity of oil slick changes significantly with its thickness when oil slick is relatively thin (20-120 µm), which provides an effective means for detecting the existence of offshore thin oil slick In the spectrum ranges from 8 to 10 µm and from 13. 2 to 14 µm, there is a steady emissivity difference between the seawater and thin oil slick with thickness of 20 µm. The emissivity of oil slick changes marginally with oil slick thickness and clearly below that of seawater in the spectrum range from 11. 7 to 14 µm, this spectrum range can be practically used to distinguish oil slick from seawater; Around the wavelength of 11.72, 12.2, 12.55, 13.48 and 13.8 µm, the emissivity of oil slick presents clearly increasing or decreasing trends with the increase of its thickness, which are one of the best wavelengths for observing the offshore oil slick and estimating its thickness.
RESUMEN
OBJECTIVE: We determinated the virulence factors of Vibrio alginolyticus strains isolated from the environment by multiplex PCRs and animal experiments, in order to compare the differences between the highly virulent strain and attenuated virulent strain, and to explore the virulent mechanism of V. alginolyticus in mammals. METHODS: The virulence-related genes of V. alginolyticus were investigated by multiplex PCRs. Hemolysin and pathogenic proteins were detected using Kanagawa phenomenon tests and enzyme activity tests. In vivo pathogenetic tests of V. alginolyticus were done through orogastric and intraperitoneal Kunming mouse. RESULTS: Amylase and lecithinase activities were observed in 100% of the strains, whereas lipase and gelatinase activities were found in only 70% and urease activity was not detected. In Kanagawa phenomenon tests 60% of the strains gave positive results. The related virulence genes such as toxR, Collagenase, tlh, FlaA, ompW, AspA and fur were distributed among 10 strains of V. alginolyticus collected, with the exception of toxS, trh, tdh and UreR. Among those 10 strains, VA009 has shown a strong pathogenesis to the mouse, which caused fluid accumulation and led the mortality rate as high as 80% within 7 days by intraperitoneal infection. CONCLUSION: This study indicates that there is a great difference in pathogenicity among V. alginolyticus strains to mouse. The cell toxicity of V. alginolyticus made more contribution than extracellular secretion, while the extracellular secretion of V. parahaemolyticus played a major role in its toxicity. The virulence gene profiles were consistent between the highly virulent and attenuated virulent strains, indicating that V. alginolyticus might have a different virulence system and different pathogenic mechanism compared with V. parahaemolyticus.
Asunto(s)
Genes Bacterianos/genética , Vibrio alginolyticus/genética , Vibrio alginolyticus/patogenicidad , Factores de Virulencia/genética , Animales , Femenino , Hemólisis , Ratones , Reacción en Cadena de la Polimerasa , Especificidad de la Especie , Vibrio alginolyticus/enzimologíaRESUMEN
Bovine parainfluenza virus type 3 (BPIV-3), also known as bovine respirovirus 3, is a common respiratory pathogen associated with bovine respiratory disease (BRD). BPIV-3 has currently circulated worldwide; however, data on the prevalence and genetic characteristics of BPIV-3 are still scarce and limited. In this study, the BPIV-3 strain SC was identified and isolated from cattle presenting with clinical signs of BRD in China. Animal experiments indicated that BPIV-3 SC can successfully infect C57BL/6 mice and induce weight loss, lung inflammatory cell infiltration, and inflammatory cytokine expression in mice. In addition, the complete genome of BPIV-3 SC was obtained using next-generation sequencing and was 15,473 bp in length. Phylogenetic analysis indicated that BPIV-3 SC belonged to genotype C, which clustered in the same large clade consisting of a population of Chinese genotype C strains but was found to be different from the other strains upon further differentiation. Compared to other Chinese genotype C strains, the BPIV-3 SC showed 70 unique nucleotide mutations and 13 unique amino acid mutations in the HN, P, and L proteins, suggesting a unique genetic evolution of BPIV-3 SC. In conclusion, we isolated and characterized a differential Chinese genotype C BPIV-3, which contributed to an understanding of the prevalence and evolution of BPIV-3 in China.
RESUMEN
Construction of a built-in electric field has been identified as an attractive improvement strategy for photoelectrochemical (PEC) water splitting by facilitating the carrier extraction from the inside to the surface. However, the promotion effect of the electric field is still restrained by the confined built-in area. Herein, we construct a microscale built-in electric field via gradient oxygen doping. The octahedral configuration of the synthesized CdIn2S4 (CIS) provides a structural basis, which enables the subsequent oxygen doping to reach a depth of â¼100 nm. Accordingly, the oxygen-doped CIS (OCIS) photoanode exhibits a microscale built-in electric field with band bending. Excellent PEC catalytic activity with a photocurrent density of 3.69 mA cm-2 at 1.23 V vs. RHE is achieved by OCIS, which is 3.1 times higher than that of CIS. Combining the results of thorough characterization and theoretical calculations, accelerating migration and separation of charge carriers have been determined as the reasons for the improvement. Meanwhile, the recombination risk at the doping centers has also been reduced to the minimum via optimal experiments. This work provides a new-generation idea for constructing a built-in electric field from the view point of bulky configuration towards PEC water splitting.
RESUMEN
Hydrovoltaic energy technology that generates electricity directly from the interaction of materials with water has been regarded as a promising renewable energy harvesting method. With the advantages of high specific surface area, good conductivity, and easily tunable porous nanochannels, two-dimensional (2D) nanomaterials have promising potential in high-performance hydrovoltaic electricity generation applications. Herein, this review summarizes the most recent advances of 2D materials for hydrovoltaic electricity generation, including carbon nanosheets, layered double hydroxide (LDH), and layered transition metal oxides and sulfides. Some strategies were introduced to improve the energy conversion efficiency and the output power of hydrovoltaic electricity generation devices based on 2D materials. The applications of these devices in self-powered electronics, sensors, and low-consumption devices are also discussed. Finally, the challenges and perspectives on this emerging technology are outlined.
RESUMEN
Selective oxidation of C-H bonds under mild conditions is one of the most important and challenging issues in utilization of energy-related molecules. Molybdenum oxide nanostructures containing Mo5+ species are effective for these reactions, but the accurate identification of the structure of active Mo5+ species and the catalytic mechanism remain unclear. Herein, unsaturated penta-coordinated Mo5c5+ with a high fraction in MoOx fabricated by the hydrothermal method were identified as the active sites for low-temperature oxidation of dimethyl ether (DME) by the deep correlation of characterizations, density functional theory calculations, and activity results, giving a methyl formate selectivity of 96.3% and DME conversion of 12.5% at unreported 110 °C. Low-temperature electron spin resonance (ESR) and quasi in situ X-ray photoelectron spectra (XPS) with the designed experiments confirm that the Mo5c5+ species can be formed in situ. Molybdenum located at the pentachronic site is preferable to significantly promote the oxidation of the C-H bond in CH3O* at lower temperatures.
RESUMEN
The Chlorella sorokiniana F31 is a promising lutein producer with high lutein content. Herein, different graphene/TiO2 nanoparticles (NPs) were designed and synthesized by hydrothermal method. Through the UV-vis diffuse reflectance spectra (DRS) analysis, the results showed that RGO-TiO2 NPs can effectively expand visible light absorption compared with TiO2 NPs. Subsequently, the effects of these NPs on light utilization and lutein accumulation of C. sorokiniana F31 were investigated, and the RGO-TiO2 NPs treatment exhibited the higher lutein production and content than that of TiO2 and control group. As the optimal RGO-TiO2 (0.5 wt%) NPs concentration of 50 mg/L and light intensity of 211 µmol/m2/s, the supreme lutein content (15.55 mg/g), production (77.2 mg/L) and productivity (12.87 mg/L/d) were achieved. The performances are higher than most of reported values in previous study, indicated that RGO-TiO2 (0.5 wt%) NPs treatment is a promised strategy to enhance microalgal growth and lutein accumulation.
Asunto(s)
Chlorella , Grafito , Nanopartículas , Luz , Luteína , TitanioRESUMEN
BACKGROUND: Toll-like receptor 3 (TLR3) not only plays a crucial role in innate immune and inflammation but also in anti-cancer immunity. Nevertheless, the clinicopathological outcome of TLR3 in ESCC is still ambiguous. METHODS: Immunohistochemistry was performed to investigate TLR3 expression and its impact on survival in 137 ESCC patients (including paired esophageal tissues with different stages of early lesions from 37 patients). Furthermore, we downloaded ESCC RNA-seq datasets (including phenotype and survival data) from The Cancer Genome Atlas (TCGA). The relationship between TLR3 and prognosis, biological landscape, and immune infiltration was assessed to verify the immunohistochemical results of our tissue samples, explore the possible mechanism of prognostic outcomes, and predict the sensitivity of immunotherapy. RESULTS: TLR3 protein expression displayed an increasing trend in the progression through different grades of cellular atypia, from normal, esophageal simple hyperplasia (ESSH), intraepithelial neoplasia (IEN) to ESCC (P < 0.0083). TLR3 protein had a positive association with inflammation level (Rho = 0.341, P < 0.001). TLR3 mRNA expression was significantly higher in comparison to adjacent normal tissues (P < 0.001). Cox regression analysis indicated high TLR3 protein and mRNA expression conferred good prognosis in our samples and TCGA, especially for advanced ESCC patients (TNM stage III and IV). Overexpression of TLR3 resulted in an immune-active microenvironment via the recruitment of immune-active cells including cytotoxic lymphocytes (CTLs), CD8+ T cells, NK cells, dendritic cells, and M1-type macrophages. TLR3 expression was correlated with the pro-inflammatory cytokines and chemokines relating to anti-tumor immunity. Moreover, GSEA analysis indicated upregulated expression of TLR3 could activate the apoptotic pathway. CONCLUSION: High TLR3 expression in ESCC patients was associated with a more favorable prognosis, immune-active cell infiltration, and an activated apoptotic pathway. TLR3 has potential applications for immunotherapy and immune response prediction in patients with ESCC.
RESUMEN
Despite the high energy density of O3-type layered cathode materials, the short cycle life in aqueous electrolyte hinders their practical applications in aqueous lithium-ion batteries (ALIBs). In this work, it is demonstrated that the structural stability of layered LiCoO2 in aqueous electrolyte can be remarkably improved by altering the oxygen stacking from O3 to O2. As compared to the O3-type LiCoO2 , the O2-type LiCoO2 exhibits significantly improved cycle performance in neutral aqueous electrolyte. It is found that the structural degradation caused by electrophilic attack of proton can be effectively mitigated in O2-type layered structure. With O2 stacking, CoO6 octahedra in LiCoO2 possess stronger CoO bonds while Co migration from Co layer to Li layer is strongly hampered, resulting in enhanced structural stability against proton attack and prolonged cycle life in aqueous electrolyte. The findings in this work reveal that regulating oxygen stacking sequence is an effective strategy to improve the structural stability of layered materials for ALIBs.
RESUMEN
In this study, a magnetic nanocatalyst (Fe3 O4 @SiO2 @CeO2 ) was prepared and applied in the catalytic ozonation of methyldopa (MD). The effects of operational parameters on catalytic ozonation performance were investigated, including ozone dosage, catalyst dosage, initial MD concentration, and pH. The removal of MD was 45.2% in ozonation, whereas the efficiency was achieved to 83.0% with the addition of Fe3 O4 @SiO2 @CeO2 . The results showed that Fe3 O4 @SiO2 @CeO2 could significantly improve the catalytic ozonation performance. And the enhanced mechanism study showed that it was attributed to promotion of ozone decomposition to generate hydroxyl radical. The reaction model was explored, and the reaction rates were calculated for the MD degradation in catalytic ozonation. A higher degradation efficiency of MD in catalytic ozonation was attributed to the enhanced surface effect of the catalysts, which was confirmed by using TBA, PO4 3- , and p-BQ as scavengers of hydroxyl radical, surface reaction, and superoxide radical. The hydroxyl radical and superoxide radical played an important role in the degradation of MD. The mechanism of catalytic ozonation by Fe3 O4 @SiO2 @CeO2 was discussed via X-ray photoelectron spectroscopy (XPS) spectra and experimental data.