Identifying hypothermia death in a mouse model by ATR-FTIR.

The identification of hypothermia death (HD) is difficult for cadavers, especially the distinction from death due to alternative causes. A large number of studies have shown that brown adipose tissue (BAT) plays critical roles in thermoregulation of mammals. In this study, BAT of mice was used for the discrimination of HD using attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR). A modified mouse HD model conducted by Feeney DM was used in this study to obtain infrared spectra of BAT. Principal component analysis (PCA), partial least squares discriminant analysis (PLS-DA), and orthogonal partial least squares discriminant analysis (OPLS-DA) were used to establish discrimination models. The PLS-DA and OPLS-DA models exhibit prominent discriminative efficiency, and the accuracy of HD identification using fingerprint regions and ratios of absorption intensity is near 100% in both the calibration and validation sets. Our preliminary study suggests that BAT may be an extremely effective target tissue for identification of cadavers of HD, and ATR-FTIR spectra combined with chemometrics have also shown potential for cadaver identification in forensic practice in a fast and accurate manner.

Study on the optimal parameter range of droplet-wrapped respirable dust in spray dustfall by mesoscopic method.

Coal miners on the fringes of cities are often exposed to respirable dust hazards. Spray is one of the most effective dust reduction measures. When studying the coupling and collision behavior of droplets and dust particles, it is helpful to optimize the parameter range of the droplets to capture dust particles at the mesoscopic level, to determine the effect of the spray field on the dust particles at the macroscopic level. In this study, the volume of fluid (VOF) method was used to track the interface of multiphase flow. A numerical simulation of 13 working conditions was carried out using the control variable method. Based on the numerical simulation results, we obtained the optimal parameter range for dust to be encapsulated by droplets. To confirm the reliability of the simulation, we independently developed an experimental system and conducted experiments. The simulation results obtained were measured using the experimental system, and an optimal droplet parameter range of 7 µm to settle dust in a coal mining face was determined. Numerical simulation using a mesoscopic method to study dust-spray coupling produced reliable results, which can be used in the practical application of spray dust reduction and has wider relevance for practical engineering.

Variation of Suspended Particles in the Bottom Layer of the East China Sea with Data from Seafloor Observatory.

The in situ scattering and transmissometry laser (LISST-100X), equipped with an acoustic wave and current (AWAC) meter and conductivity, temperature, and depth (CTD) instruments over the seabed in the East China Sea, was used to monitor the variation in suspended particles in the bottom sea layer, including particle size distribution (PSD) and volume concentration. The power law approximation was tested to describe the variability in PSD based on the field data. The results show that the power law was robust in processing continuous data, accompanied with the same optimal reference particle size (~63 µm) and little change in the corresponding exponent (~3.4) in both periods. Suspended particles were divided into three types: macroflocs (>133 µm), microflocs (36-133 µm), and single grains (<36 µm). Particle sizes were coarse during the two seasons, with macroflocs representing more than 60% of all the suspended particles, especially in February, when the particle size spectra were usually open-ended. Results from the harmonic analysis method indicate that tidal-induced resuspension and advection are the major reasons for the diurnal dynamics of sediments. Due to the tidal asymmetry in the region, we only found one mode in volume concentration at the moment of maximum velocity. However, the ratios of macroflocs were bimodal, with maximum floods and ebbs in one tidal cycle in February, when the higher mode at the maximum ebbs may be contributed to by the flocculation of finer particles considering the decreasing ratios of finer particles. Due to the enhanced stratification and the clean barrier built up by the Taiwan Warm Current in the southeast corner, the significant daily variation in suspended particles observed in February weakened in September. The influence of waves was uncertain, although the correlation coefficient between significant wave height and volume concentration was about 64% in February.

A Sensor Control Model for Cabled Seafloor Observatories in the East China Sea.

Seafloor observatories enable real-time, continuous and long-term observations that promise major breakthroughs in ocean sciences. The effort to dynamically control in situ sensor systems performing individual and cooperative observation tasks is both a challenge and a guarantee for the stable operations of functional observatories. However, current sensor control systems for seafloor observatories are application-oriented and focus on specific engineering requirements rather than general model research. In this paper, a sensor control model was proposed to provide a theoretical specification for designing, developing and deploying a sensor control system for cabled seafloor observatories. The model abstracted the sensor control as a standardized bidirectional information flow process and accordingly structured the control system into the application layer, the service layer, the networking layer, and the sensing layer. The layered functions and interactions between adjacent layers in return realized this information process. A prototype control system was designed and developed, the monitoring architecture of which was derived from one of the deployment scenarios of the sensor control model. The prototype system was tested for its plug-and-play enablement through a series of trials such as tank tests and shallow sea trials. It was put into service for the operational Xiaoqushan Seafloor Observatory and was consistently functioning and presenting satisfactory practical performance in accordance with all the requirements laid for the project.

Development of a Plug-and-Play Monitoring System for Cabled Observatories in the East China Sea.

Seafloor observatories enable long term, continuous and multidisciplinary observations, promising major breakthroughs in marine environment research. The effort to remotely control in situ multidisciplinary equipment performing individual and cooperative tasks is both a challenge and a guarantee for the stable operations of functional observatories. With China starting to establish ocean observatory sensor networks, in this study we describe a monitoring system for cabled observatories in the East China Sea (ESOMS) that enables this effort in a plug and play way. An information oriented monitoring architecture for ESOMS was first introduced, derived from a layered control model for ocean observatory sensor network. The architecture contained three components and enabled bidirectional information flow of observation data and commands, based on which architecture components were designed to enable plug-and-play control within related model layers. A control method enabled by general junction box (GJB) and ocean sensor markup language (OSML) was thus proposed as the plug-and-play solution for implementing ESOMS. The GJB-OSML enabled control method (GOE Control Method) mainly actualized two processes, one of which was that the in situ GJB interfaced and represented every attached sensor as a Sensing Endpoint in the cabled observatory network. The other process was that the remote ESOMS utilized the same IP/Port related information modeled by OSML to create/operate a Function Node acted as agent of the in situ sensor. A case study for using ESOMS in the Xiaoqushan Seafloor Observatory was finally presented to prove its performance and applicability. Given this successful engineering trial, the ESOMS design and implementation could be applicable and beneficial for similar efforts in future construction of seafloor observatory network both at home and abroad.

Cholesterol homeostasis confers glioma malignancy triggered by hnRNPA2B1-dependent regulation of SREBP2 and LDLR.

BACKGROUND: Dysregulation of cholesterol metabolism is a significant characteristic of glioma, yet the underlying mechanisms are largely unknown. N6-methyladenosine (m6A) modification has been implicated in promoting tumor development and progression. The aim of this study was to determine the key m6A regulatory proteins involved in the progression of glioma, which is potentially associated with the reprogramming of cholesterol homeostasis. METHODS: Bioinformatics analysis was performed to determine the association of m6A modification with glioma malignancy from The Cancer Genome Atlas and Genotype-Tissue Expression datasets. Glioma stem cell (GSC) self-renewal was determined by tumor sphere formation and bioluminescence image assay. RNA sequencing and lipidomic analysis were performed for cholesterol homeostasis analysis. RNA immunoprecipitation and luciferase reporter assay were performed to determine hnRNPA2B1-dependent regulation of sterol regulatory element-binding protein 2 (SREBP2) and low-density lipoprotein receptor (LDLR) mRNA. The methylation status of hnRNPA2B1 promoter was determined by bioinformatic analysis and methylation-specific PCR assay. RESULTS: Among the m6A-regulatory proteins, hnRNPA2B1 was demonstrated the most important independent prognostic risk factor for glioma. hnRNPA2B1 ablation exhibited a significant tumor-suppressive effect on glioma cell proliferation, GSC self-renewal and tumorigenesis. hnRNPA2B1 triggers de novo cholesterol synthesis by inducing HMGCR through the stabilization of SREBP2 mRNA. m6A modification of SREBP2 or LDLR mRNA is required for hnRNPA2B1-mediated mRNA stability. The hypomethylation of cg21815882 site on hnRNPA2B1 promoter confers elevated expression of hnRNPA2B1 in glioma tissues. The combination of targeting hnRNPA2B1 and cholesterol metabolism exhibited remarkable antitumor effects, suggesting valuable clinical implications for glioma treatment. CONCLUSIONS: hnRNPA2B1 facilitates cholesterol uptake and de novo synthesis, thereby contributing to glioma stemness and malignancy.

Numerical simulation study on atomization rule and dust removal effect of surface-active dust suppressants.

Spray dust reduction is a common dust control process in coal mines. However, the actual efficiency of spray dust reduction in a coal mine is low due to poor coal wettability. We select four surfactants that can greatly improve the surface activity of a dust suppressant solution. The wettability of the surfactant solution on coal dust is investigated in terms of two aspects: surface tension and contact angle. The effects of the type of surface-active dust suppressant and its concentration in the spray solution on the wetting of the coal dust and curing effects were analyzed. Numerical simulations were used to simulate spray atomization and to deduce how different types and concentrations of dust suppressant solutions affect the spray. The technical approach of the spray dust reduction method was further optimized by comprehensive analysis and numerical simulations, which could provide guidance for the application of spray dust reduction in coal mines.

Hedgehog pathway is negatively regulated during the development of Drosophila melanogaster PheRS-m (Drosophila homologs gene of human FARS2) mutants.

Hereditary spastic paraplegia (HSP) is a neurodegeneration disease, one of the reasons is caused by autosomal recessive missense mutation of the karyogene that encodes phenylalanyl-tRNA synthetase 2, mitochondrial (FARS2). However, the molecular mechanism underlying FARS2-mediated HSP progression is unknown. Mitochondrial phenylalanyl-tRNA synthetase gene (PheRS-m) is the Drosophila melanogaster homolog gene of human FARS2. This study constructed a Drosophila HSP missense mutation model and a PheRS-m knockout model. Some of the mutant fly phenotypes included developmental delay, shortened lifespan, wing-structure abnormalities and decreased mobility. RNA-sequencing results revealed a relationship between abnormal phenotypes and the hedgehog (Hh) pathway. A qRT-PCR assay was used to determine the key genes (ptc, hib, and slmb) of the Hh pathway that exhibited increased expression during different developmental stages. We demonstrated that Hh signaling transduction is negatively regulated during the developmental stages of PheRS-m mutants but positively regulated during adulthood. By inducing the agonist and inhibitor of Hh pathway in PheRS-m larvae, the developmental delay in mutants can be partly salvaged or postponed. Collectively, our findings indicate that Hh signaling negatively regulates the development of PheRS-m mutants, subsequently leading to developmental delay.

High activity of NiCo2O4 promoted Pt on three-dimensional graphene-like carbon for glycerol electrooxidation in an alkaline medium.

Spinel oxide NiCo2O4 supported on a three-dimensional hierarchically porous graphene-like carbon (3D HPG) material has been firstly used to enhance the activity of Pt for glycerol electrooxidation. The addition of NiCo2O4 into the Pt/HPG catalyst can significantly improve the catalytic performance for glycerol oxidation. When NiCo2O4 is added to the Pt/HPG catalyst, the onset potential is 25 mV more negative than that on the Pt/HPG catalyst without NiCo2O4. The current density at -0.3 V on the Pt-NiCo2O4 (wt 10 : 1)/HPG electrode is 1.3 times higher than that on the Pt (30 wt%)/HPG electrode. The Pt-NiCo2O4 electrode presented in this work shows great potential as an electrocatalyst for glycerol electrooxidation in an alkaline medium.

Effect of spraying on coal dust diffusion in a coal mine based on a numerical simulation.

Aimed at effectively controlling coal dust pollution in the mining face of a coal mine, this study first conducted a theoretical analysis and then combined a spraying experiment and a numerical simulation to perform an in-depth examination of the atomizing characteristics and dust suppression performance of a coal cutter external spraying device. Based on the experimental spraying results, the optimal nozzle was determined to be a pressure round-mouth nozzle with an X-shaped core. The characteristics of the spray fields from nozzles of different calibers (1.6, 2.0 and 2.4 mm) at different spraying pressures (2, 4, 6 and 8 MPa) were then analyzed. It was found that the droplet concentration in the spray field increased with increasing spraying pressure and nozzle caliber. The droplet diameter was mainly dependent on the spraying pressure and varied more slowly with increased spraying pressure. At a spraying pressure of 8 MPa, the spray field formed could achieve effective dust suppression; specifically, the droplet concentration in the spray field was mostly more than 15 g/m3, and the droplet size was mainly distributed in the range of 30-100 µm. When using a 2.4 mm caliber nozzle, the dust concentration measured around the coal cutter operator was reduced to 87.21 mg/m3 under a spraying pressure of 8 MPa, suggesting adequate dust suppression.

Pd supported on carbon containing nickel, nitrogen and sulfur for ethanol electrooxidation.

Carbon material containing nickel, nitrogen and sulfur (Ni-NSC) has been synthesized using metal-organic frameworks (MOFs) as precursor by annealing treatment with a size from 200 to 300 nm. Pd nanoparticles supported on the Ni-NSC (Pd/Ni-NSC) are used as electrocatalysts for ethanol oxidation in alkaline media. Due to the synergistic effect between Pd and Ni, S, N, free OH radicals can form on the surface of Ni, N and S atoms at lower potentials, which react with CH3CO intermediate species on the Pd surface to produce CH3COO- and release the active sites. On the other hand, the stronger binding force between Pd and co-doped N and S is responsible for enhancing dispersion and preventing agglomeration of the Pd nanoparticles. The Pd(20 wt%)/Ni-NSC shows better electrochemical performance of ethanol oxidation than the traditional commercial Pd(20 wt%)/C catalyst. Onset potential on the Pd(20 wt%)/Ni-NSC electrode is 36 mV more negative compared with that on the commercial Pd(20 wt%)/C electrode. The Pd(20 wt%)/Ni-NSC in this paper demonstrates to have excellent electrocatalytic properties and is considered as a promising catalyst in alkaline direct ethanol fuel cells.

Three-dimensional ordered mesoporous Co3O4 enhanced by Pd for oxygen evolution reaction.

Considerable efforts have been devoted recently to design and fabrication of high performance and low cost electrocatalysts for oxygen evolution reaction (OER). However, catalytic activity of current electrocatalysts is usually restricted by high onset potential and limited active sites. Herein, we fabricated three-dimensional (3D) highly ordered mesoporous Pd-Co3O4 composite materials as excellent electrocatalysts for OER in alkaline solution with high activity and stability. Three-dimensional highly ordered mesoporous Co3O4 material was firstly synthesized using mesoporous silica KIT-6 as hard template. Then, Pd-Co3O4 nanomaterials were prepared by a simple reduction method. The as-prepared 3D mesoporous Pd-Co3O4 catalysts have ordered mesoporous structure with a high surface area of 81.0 m2 g-1. Three-dimensional highly ordered mesoporous structure can facilitate diffusion and penetration of electrolyte and oxygen. Moreover, the catalysts can also keep catalyst particles in a well dispersed condition with more catalytic active sites. Electrochemical measurements reveal that the 3D mesoporous Pd-Co3O4 catalysts exhibit superior performance in alkaline solution with low onset potential (0.415 V vs. SCE) and excellent long-duration cycling stability.

Au-NiCo2O4 supported on three-dimensional hierarchical porous graphene-like material for highly effective oxygen evolution reaction.

A three-dimensional hierarchical porous graphene-like (3D HPG) material was synthesized by a one-step ion-exchange/activation combination method using a cheap metal ion exchanged resin as carbon precursor. The 3D HPG material as support for Au-NiCo2O4 gives good activity and stability for oxygen evolution reaction (OER). The 3D HPG material is induced into NiCo2O4 as conductive support to increase the specific area and improve the poor conductivity of NiCo2O4. The activity of and stability of NiCo2O4 significantly are enhanced by a small amount of Au for OER. Au is a highly electronegative metal and acts as an electron adsorbate, which is believed to facilitate to generate and stabilize Co(4+) and Ni(3+) cations as the active centres for the OER.

Novel Pt/CeO2/C catalysts for electrooxidation of alcohols in alkaline media.

Electrochemical oxidation of methanol, ethanol, glycerol and ethylene glycol (EG) on novel Pt-CeO(2)/C catalysts in alkaline media has been studied and shows an improved performance in terms of the electrode activity and the poisoning resistance.