RESUMEN
Pd-based electrocatalysts are the most effective catalysts for ethylene glycol oxidation reaction (EGOR), while the disadvantages of poor stability, low resistance to neutrophilic, and low catalytic activity seriously hamper the development of direct ethylene glycol fuel cells (DEGFCs). In this work, defect-riched PdCoZn nanosheets (D-PdCoZn NSs) with ultrathin 2D NSs and porous structures are fabricated through the solvothermal and alkali etching processes. Benefiting from the presence of defects and ultrathin 2D structures, D-PdCoZn NSs demonstrate excellent electrocatalytic activity and good durability against EGOR in alkaline media. The mass activity and specific activity of D-PdCoZn NSs for EGOR are 9.5 A mg-1 and 15.7 mA cm-2 , respectively, which are higher than that of PdCoZn NSs, PdCo NSs, and Pd black. The D-PdCoZn NSs still maintain satisfactory mass activity after long-term durability tests. Meanwhile, in situ IR spectroscopy demonstrates that the presence of defects attenuated the adsorption of intermediates, which improves the selectivity of the C1 pathway with excellent anti-CO poisoning performance. This work not only provides an effective synthetic strategy for the preparation of Pd-based nanomaterials with defective structures but also indicates significant guidance for optimum C1 pathway selectivity of ethylene glycol and other challenging chemical transformations.
RESUMEN
Design high-loading with superior activity and high atomic efficiency has consistently been a new frontier of heterogeneous catalysis while challenging in synthetic technology. In this work, a universal solid-state strategy is proposed for large scalable production of high-loading Ir clusters on porous hollow carbon nanobowls (Ir CSs/PHCNBs). The strong electronic interaction between metallic Ir cluster and C on PHCNBs leads to electron redistribution, which significantly improves the electron transfer rate on the interface. The obtained Ir CSs/PHCNBs only require overpotentials of 35, 34, and 37 mV for the hydrogen evolution reaction (HER) with stable outputting of 10 mA cm-2 under acidic, alkaline, and neutral conditions, respectively, which exceeds the state-of-the-art HER electrocatalysts. Meanwhile, the Tafel slopes of Ir CSs/PHCNBs for the HER process are 23.07, 48.76, and 28.95 mV dec-1 , greatly lower than that of PHCNBs (152.73, 227.96, and 140.29 mV dec-1 ) and commercial Pt/C (20%) (36.33, 66.10, and 36.61 mV dec-1 ). These results provide a new strategy for the universal synthesis of clusters catalysts and insight into understanding the interface effects between clusters and carbon substrate, facilitating the industrial application of hydrogen production.
RESUMEN
Efficient and low-cost electrocatalysts for the hydrogen evolution reaction (HER) are required for producing hydrogen energy through water splitting. Carbon materials as HER catalyst supports are explored widely since the strong metal-support interactions are generally believed to be active and stable toward HER. Herein, we report N-doped porous carbon materials as novel substrates to stabilize the cluster metal sites through the Ru(III) polyamine complexes, which play an important role not only in efficient electron transfer but also in the increasing utilization of metallic active sites. Meanwhile, due to the strong metal-support interactions driven by Ru(III) polyamine complexes, the obtained Ru cluster with a mass loading of 3% on N-doped porous carbon nanoplates (Ru cluster@NCs) exhibits robust stability for HER at a constant voltage, proving to be a promising candidate catalyst for HER. Density functional theory calculations further indicate that the Gibbs free energy (ΔG) of adsorbed H* of Ru cluster@NCs is much closer to zero compared to Ru@(10%)NCs and Pt/C(20%), thus Ru cluster@NCs facilitate the HER process.
RESUMEN
As a technology for emerging environmental applications, water electrolysis is a significant approach for producing clean hydrogen energy. In this work, we used an efficacious piezoelectric method to significantly improve the catalytic water splitting activity without affecting the morphology as well as the components by altering the bulk charge separation state inside the material. The obtained CuCo2O4 nanorods were treated under a corona polarization apparatus, which significantly enhanced ferroelectricity relative to that before the polarization increasing the physical charge separation and piezoelectric potential energy, enhancing the green hydrogen production. The polarized CuCo2O4 nanorods exhibit excellent water electrolysis performance under alkaline conditions, with hydrogen evolution overpotential of 78.7 mV and oxygen evolution overpotential of 299 mV at 10 mA cm-2, which is much better than that of unpolarized CuCo2O4 nanorods. Moreover, the Tafel slopes of polarized CuCo2O4 nanorods are 86.9 mV dec-1 in the HER process and 73.1 mV dec-1 in the OER process, which are much lower than commercial catalysts of Pt/C (88.0 mV dec-1 for HER) or RuO2 (78.5 mV dec-1 for OER), proving faster kinetic on polarized CuCo2O4 nanorods due to their higher electroconductibility and intrinsic activity. In particular, polarized CuCo2O4 nanorods are identified as promising catalysts for water electrolysis with robust stability, offering outstanding catalytic performance and excellent energy efficiency.
RESUMEN
The electrocatalytic nitrogen reduction reaction (NRR) is emerging as a great promise for ambient and sustainable NH3 production while it still suffers from the high adsorption energy of N2 , the difficulty of *NN protonation, and inevitable hydrogen evolution, leading to a great challenge for efficient NRR. Herein, we synthesized a series of amorphous trimetal Pd-based (PdCoM (M = Cu, Ag, Fe, Mo)) nanosheets (NSs) with an ultrathin 2D structure, which shows high efficiency and robust electrocatalytic nitrogen fixation. Among them, amorphous PdCoCu NSs exhibit excellent NRR activity at low overpotentials with an NH3 yield of 60.68 µg h-1 mgcat -1 and a corresponding Faraday efficiency of 42.93% at -0.05 V versus reversible hydrogen electrode as well as outstanding stability with only 5% decrease after a long test period of 40 h at room temperature. The superior NRR activity and robust stability should be attributed to the large specific surface area, abundant active sites as well as structural engineering and electronic effect that boosts up the Pd 4d band center, which further efficiently restrains the hydrogen evolution. This work offers an opportunity for more energy conversion devices through the novel strategy for designing active and stable catalysts.
Asunto(s)
Amoníaco , Electrónica , Adsorción , Electrodos , Hidrógeno , NitrógenoRESUMEN
Water electrolysis is an environmentally friendly and sustainable technique for ultra-pure hydrogen production, while expensive electrode materials and high driving voltage have seriously hindered its commercialization process. Here, Earth-abundant bifunctional porous Ni2P hollow nanotubes on nickel foam (Ni2P-HNTs/NF) electrocatalysts are synthesized through a facile self-template method and a phosphating process, which are perfectly combined with the hydrazine electrooxidation reaction (HzOR) boosted water electrolysis. Benefiting from the unique structural characteristic of open-framework and abundant step atoms, Ni2P-HNTs/NF achieves 10 mA cm-2 at 91 mV (vs. RHE) for the cathodic hydrogen evolution reaction and 18 mV (vs. RHE) for the anodic HzOR in a three electrode system, respectively. The corresponding two-electrode hydrazine electrolyzer produces 10 mA cm-2 with a total voltage of only 152 mV for ultra-pure hydrogen production, highlighting a cost-effective and energy-saving water electrolysis mode.
RESUMEN
Direct ethanol fuel cells (DEFCs) with a high conversion efficiency are quite promising candidates for energy conversion devices. Herein, we have successfully synthesized PdCo alloy nanocubes supported on carbon nanobowl (denoted as Pd2Co1/CNB) nanohybrids by using the cyanogel auto-reduction method at high temperature. The morphology, composition and structure of Pd2Co1/CNB nanohybrids are characterized in detail, revealing that PdCo nanocubes have a high alloying degree and special {110} facets. In cyclic voltammetry measurements, Pd2Co1/CNB nanohybrids show a mass activity of 1089.0 A g Pd-1 and a specific activity of 40.03 mA cm-2 for ethanol electrooxidation at peak potential, which are much higher than that of the commercial Pd/C electrocatalyst (278.2 A gPd-1 and 8.22 mA cm-2). Additionally, chronoamperometry measurements show that Pd2Co1/CNB nanohybrids have excellent durability for ethanol electrooxidation. A high alloying degree, special {110} facets and the CNB supporting material contribute to the high activity and durability of Pd2Co1/CNB nanohybrids, making them a highly promising Pt-alternative electrocatalyst for ethanol electrooxidation in DEFCs.
RESUMEN
The electrocatalytic hydrogen evolution reaction (HER) is a highly promising green method for sustainable and efficient hydrogen production. So far, Pt nanocrystals are still the most active electrocatalysts for the HER in acidic media, although a tremendous search for alternatives has been done in the past decade. In this work, we synthesize polyethyleneimine (PEI) functionalized Pt superstructures (Pt-SSs@PEI) with tetragonal, hierarchical, and branched morphologies with a facile wet chemical reduction method. A series of physical characterizations are conducted to investigate the morphology, electronic structure, surface composition, and formation mechanism of Pt-SSs@PEI. Impressively, the as-prepared Pt-SSs@PEI show an unprecedented onset reduction potential (+64.6 mV vs. reversible hydrogen electrode) for the HER in strong acidic media due to the protonation of -NH2 groups in the PEI adlayers on the Pt surface, and they outperform all currently reported HER electrocatalysts. The work highlights a highly effective interface-engineering strategy for improving the electrocatalytic performance of Pt nanocrystals for the HER.
RESUMEN
Ultrathin noble metal nanosheets with atomic thickness exhibit abnormal electronic, surfacial, and photonic properties due to the unique two-dimensional (2D) confinement effect, which have attracted intensive research attention in catalysis/electrocatalysis. In this work, the well-defined ultrathin Rh nanosheet nanoassemblies with dendritic morphology are synthesized by a facile hydrothermal method with assistance of poly(allylamine hydrochloride) (PAH), where PAH effectively acts as the complexant and shape-directing agent. Transmission electron microscopy and atomic force microscopy images reveal the thickness of 2D Rh nanosheet with (111) planes is only ca. 0.8-1.1 nm. Nitrogen adsorption-desorption measurement displays the specific surface area of the as-prepared ultrathin Rh nanosheet nanoassemblies is 139.4 m2 g-1, which is much bigger than that of homemade Rh black (19.8 m2 g-1). Detailed catalytic investigations display the as-prepared ultrathin Rh nanosheet nanoassemblies have nearly 20.4-fold enhancement in mass-activity for the hydrolysis of ammonia borane as compared with homemade Rh black.
RESUMEN
Alkaline phosphatases (ALP, EC 3.1.3.1) are ubiquitous enzymes found in most species. ALP from a pearl oyster, Pinctada fucata (PALP), is presumably involved in nacreous biomineralization processes. Here, chemical modification was used to investigate the involvement of basic residues in the catalytic activity of PALP. The Tsou's plot analysis indicated that the inactivation of PALP by 2,4,6-trinitrobenzenesulfonic acid (TNBS) and phenylglyoxal (PG) is dependent upon modification of one essential lysine and one essential arginine residue, respectively. Substrate reaction course analysis showed that the TNBS and PG inactivation of PALP followed pseudo-first-order kinetics and the second-order inactivation constants for the enzyme with or without substrate binding were determined. It was found that binding substrate slowed the PG inactivation whereas had little effect on TNBS inactivation. Protection experiments showed that substrates and competitive inhibitors provided significant protection against PG inactivation, and the modified enzyme lost its ability to bind the specific affinity column. However, the TNBS-induced inactivation could not be prevented in presence of substrates or competitive inhibitors, and the modified enzyme retained the ability to bind the affinity column. In a conclusion, an arginine residue involved in substrate binding and a lysine residue involved in catalysis were present at the active site of PALP. This study will facilitate to illustrate the role ALP plays in pearl formation and the mechanism involved.
Asunto(s)
Fosfatasa Alcalina/química , Arginina/química , Lisina/química , Ostreidae/enzimología , Fenilglioxal/química , Ácido Trinitrobencenosulfónico/química , Fosfatasa Alcalina/antagonistas & inhibidores , Animales , Sitios de Unión , Activación Enzimática , Cinética , Especificidad por SustratoRESUMEN
Alkaline phosphatases are ubiquitous enzymes found in most species including the pearl oyster, Pinctada fucata, where it is presumably involved in nacreous biomineralization processes. In the present study, we have purified alkaline phosphatases from the pearl oyster and modified the tryptophan residues using N-bromosuccinimide (NBS). We show that the resulting inactivation of purified alkaline phosphatase by NBS is dependent on modification of only one of five tryptophan residues in the enzyme. Substrate protection experiments showed that the tryptophan residue was not located at the substrate-binding site but was involved in the catalytic activity.