Prediction of topological crystalline insulators and topological phase transitions in two-dimensional PbTe films.

Topological phases, especially topological crystalline insulators (TCIs), have been intensively explored and observed experimentally in three-dimensional (3D) materials. However, two-dimensional (2D) films are explored much less than 3D TCIs, and even 2D topological insulators. Based on ab initio calculations, here we investigate the electronic and topological properties of 2D PbTe(001) few-layer films. The monolayer and trilayer PbTe are both intrinsic 2D TCIs with a large band gap reaching 0.27 eV, indicating a high possibility for room-temperature observation of quantized conductance. The origin of the TCI phase can be attributed to the px,y-pz band inversion, which is determined by the competition of orbital hybridization and the quantum confinement effect. We also observe a semimetal-TCI-normal insulator transition under biaxial strains, whereas a uniaxial strain leads to Z2 nontrivial states. In particular, the TCI phase of a PbTe monolayer remains when epitaxially grown on a NaI semiconductor substrate. Our findings on the controllable quantum states with sizable band gaps present an ideal platform for realizing future topological quantum devices with ultralow dissipation.

Tunable electronic and magnetic properties in germanene by alkali, alkaline-earth, group III and 3d transition metal atom adsorption.

We performed first-principles calculations to study the adsorption characteristics of alkali, alkali-earth, group III, and 3d transition-metal (TM) adatoms on germanene. We find that the adsorption of alkali or alkali-earth adatoms on germanene has minimal effects on geometry of germanene. The significant charge transfer from alkali adatoms to germanene leads to metallization of germanene, whereas alkali-earth adatom adsorption, whose interaction is a mixture of ionic and covalent, results in semiconducting behavior with an energy gap of 17-29 meV. For group III adatoms, they also bind germanene with mixed covalent and ionic bonding character. Adsorption characteristics of the transition metals (TMs) are rather complicated, though all TM adsorptions on germanene exhibit strong covalent bonding with germanene. The main contributions to the strong bonding are from the hybridization between the TM 3d and Ge pz orbitals. Depending on the induced-TM type, the adsorbed systems can exhibit metallic, half-metallic, or semiconducting behavior. Also, the variation trends of the dipole moment and work function with the adsorption energy across the different adatoms are discussed. These findings may provide a potential avenue to design new germanene-based devices in nanoelectronics.

Effect of native defects and Co doping on ferromagnetism in HfO2: first-principles calculations.

First-principles calculations of undoped HfO(2) and cobalt-doped HfO(2) have been carried out to study the magnetic properties of the dielectric material. In contrast to previous reports, it was found that the native defects in HfO(2) could not induce strong ferromagnetism. However, the cobalt substituting hafnium is the most stable defect under oxidation condition, and the ferromagnetic (FM) coupling between the cobalt substitutions is favorable in various configurations. We found that the FM coupling is mediated by the threefold-coordinated oxygen atoms in monoclinic HfO(2) and could be further enhanced in electron-rich condition.

Glide Mirror Plane Protected Nodal-Loop in an Anisotropic Half-Metallic MnNF Monolayer.

Two-dimensional (2D) nodal-loop (NL) semimetals have attracted tremendous attention for their abundant physics and potential device applications, whereas the realization of gapless NL semimetals robust against spin-orbit coupling (SOC) remains a big challenge. Recently, breakthroughs have been made with the realization of gapless NL semimetals in 2D half-metallic materials, where NLs were protected by a horizontal mirror plane symmetry. Here we first propose an alternative nonsymmorphic horizontal glide mirror plane symmetry which could protect the NLs in 2D materials. On the basis of comprehensive first-principles calculations and symmetry analysis, we found that the glide mirror symmetry together with intrinsic out-of-plane spin polarization can protect the NL against SOC in a half-metallic semimetal, namely, the MnNF monolayer. Moreover, we predict that the MnNF monolayer has strong anisotropic characteristics, tunable band structure by changing the magnetization direction, and 100% spin-polarized transport properties. Our work not only provides a novel 2D half-metallic semimetal with strong anisotropy but also broadens the scope of 2D nodal-loop materials.

Robust half-metallicity in transition metal tribromide nanowires.

One-dimensional (1D) nanowires (NWs) with robust half-metallicity are a rising star in spintronics. Herein, we theoretically investigate the magnetic and electronic properties of 3d transition-metal tribromide NWs, i.e. TMBr3 (TM = Sc, Ti, V, Cr, Co, and Cu). These systems represent repeated TMBr3 motifs with octahedral configuration, and are expected to be synthesized in a nanotube using an established method. Among these NWs, both VBr3 and CuBr3 NWs exhibit a ferromagnetic (FM) ground state, accompanied by sizable magnetocrystalline anisotropic energy, which is dominated by the superexchange coupling between the TM atoms. Strikingly, a half-metallic nature with a magnetic moment of 4.0µB per unit cell is predicted for the VBr3 NW. By combining with a tight-binding model, we demonstrate that the origin behind the half-metallicity is the half-filled e2 orbitals of the V atoms. The Curie temperature is evaluated to be up to 80 K using Monte Carlo simulations, which is comparable to the temperature of liquid nitrogen. We also find that the half-metallic behavior shows a favorable tolerance to the longitudinal elongation of the wire (∼10%). Additionally, a transition from FM semiconductor to half-metal can be realized in the CuBr3 NW through carrier doping. The coexistence of intrinsic high-temperature FM ordering and half-metallicity endows 1D TMBr3 NWs with great promise for spintronic and photoelectron device applications.

Discovery of a novel spin-polarized nodal ring in a two-dimensional HK lattice.

Nodal-ring materials with a spin-polarized feature have attracted intensive interest recently due to their exotic properties and potential applications in spintronics. However, such a type of two-dimensional (2D) lattice is rather rare and difficult to realize experimentally. Here, we identify the first 2D Honeycomb-Kagome (HK) lattice, Mn-Cyanogen, as a new single-spin nodal-ring material by using first-principles calculations. Mn-Cyanogen shows gapless and semiconducting properties in spin-up and spin-down orientations, respectively, indicating a spin-gapless semiconductor nature. Remarkably, a spin-polarized nodal ring induced by px,y/pz band inversion is captured from the 3D band structure, which is irrelevant to spin-orbit coupling. The origin of the single-spin nodal-ring can be further clarified by the effective tight-binding (TB) model. These results open a new avenue to achieving spin-polarized nodal-ring materials with promising applications in spintronic devices.

Correction: First-principles prediction on bismuthylene monolayer as a promising quantum spin Hall insulator.

Correction for 'First-principles prediction on bismuthylene monolayer as a promising quantum spin Hall insulator' by Run-Wu Zhang, et al., Nanoscale, 2017, 9, 8207-8212.

Effect of Amidogen Functionalization on Quantum Spin Hall Effect in Bi/Sb(111) Films.

Knowledge about chemical functionalization is of fundamental importance to design novel two-dimensional topological insulators. Despite theoretical predictions of quantum spin Hall effect (QSH) insulator via chemical functionalization, it is quite challenging to obtain a high-quality sample, in which the toxicity is also an important factor that cannot be ignored. Herein, using first-principles calculations, we predict an intrinsic QSH effect in amidogen-functionalized Bi/Sb(111) films (SbNH2 and BiNH2), characterized by nontrivial Z2 invariant and helical edge states. The bulk gaps derived from px,y orbitals reaches up to 0.39 and 0.83 eV for SbNH2 and BiNH2 films, respectively. The topological properties are robust against strain engineering, electric field, and rotation angle of amidogen, accompanied with sizable bulk gaps. Besides, the topological phases are preserved with different arrangements of amidogen. The H-terminated SiC(111) is verified as a good candidate substrate for supporting the films without destroying their QSH effect. These results have substantial implications for theoretical and experimental studies of functionalized Bi/Sb films, which also provide a promising platform for realizing practical application in dissipationless transport devices at room temperature.

First-principles prediction on bismuthylene monolayer as a promising quantum spin Hall insulator.

Two-dimensional (2D) large band-gap topological insulators (TIs) with highly stable structures are imperative for achieving dissipationless transport devices. However, to date, only very few materials have been experimentally observed to host the quantum spin Hall (QSH) effect at low temperature, thus obstructing their potential application in practice. Using first-principles calculations, herein, we predicted a new 2D TI in the porous allotrope of a bismuth monolayer, i.e. bismuthylene, its geometrical stability was confirmed via phonon spectrum and molecular dynamics simulations. Analysis of the electronic structures reveals that bismuthylene is a native QSH state with a band gap as large as 0.28 eV at the Γ point, which is smaller than that (0.50 eV) of the buckled Bi (111) and suitable for room temperature applications. Notably, it has a much lower energy than flattened Bi and a higher energy than buckled Bi (111)…" [corrected] and flattened Bi films; thus, bismuthylene is feasible for experimental realization. Interestingly, the topological properties can be retained under strains within the range of -6%-3% and electrical fields up to 0.8 eV Å-1. A heterostructure was constructed by sandwiching bismuthylene between BN sheets, and the non-trivial topology of bismuthylene was retained with a sizable band gap. These findings provide a platform to design a large-gap QSH insulator based on the 2D bismuthylene films, which show potential applications in spintronic devices.

Unconventional band inversion and intrinsic quantum spin Hall effect in functionalized group-V binary films.

Adequately understanding band inversion mechanism, one of the significant representations of topological phase, has substantial implications for design and regulation of topological insulators (TIs). Here, by identifying an unconventional band inversion, we propose an intrinsic quantum spin Hall (QSH) effect in iodinated group-V binary (ABI2) monolayers with a bulk gap as large as 0.409 eV, guaranteeing its viable application at room temperature. The nontrivial topological characters, which can be established by explicit demonstration of Z2 invariant and gapless helical edge states, are derived from the band inversion of antibonding states of p x,y orbitals at the K point. Furthermore, the topological properties are tunable under strain engineering and external electric field, which supplies a route to manipulate the spin/charge conductance of edge states. These findings not only provide a new platform to better understand the underlying origin of QSH effect in functionalized group-V films, but also are highly desirable to design large-gap QSH insulators for practical applications in spintronics.

Tunability of the Quantum Spin Hall Effect in Bi(110) Films: Effects of Electric Field and Strain Engineering.

The quantum spin Hall (QSH) effect is promising for achieving dissipationless transport devices due to their robust gapless edge states inside insulating bulk gap. However, the currently discussed QSH insulators usually suffer from ultrahigh vacuum or low temperature due to the small bulk gap, which limits their practical applications. Searching for large-gap QSH insulators is highly desirable. Here, the tunable QSH state of a Bi(110) films with a black phosphorus (BP) structure, which is robust against structural deformation and electric field, is explored by first-principles calculations. It is found that the two-monolayer BP-Bi(110) film obtains a tunable large bulk gap by strain engineering and its QSH effect shows a favorable robustness within a wide range of combinations of in-plane and out-of-plane strains, although a single in-plane compression or out-of-plane extension may restrict the topological phase due to the self-doping effect. More interestingly, in view of biaxial strain, two competing physics on band topology induced by bonding-antibonding and px,y-pz band inversions are obtained. Meanwhile, the QSH effect can be persevered under an electric field of up to 0.9 V/Å. Moreover, with appropriate in-plane strain engineering, a nontrivial topological phase in a four-monolayer BP-Bi(110) film is identified. Our findings suggest that these two-dimensional BP-Bi(110) films are ideal platforms of the QSH effect for low-power dissipation devices.

Spin-dependent variable range hopping and magnetoresistance in Ti(1-x)Co(x)O(2) and Zn(1-x)Co(x)O magnetic semiconductor films.

Magnetic transport properties in Ti(1-x)Co(x)O(2) and Zn(1-x)Co(x)O magnetic semiconductors have been studied experimentally and theoretically. A linear relation of lnρ versus T(-1/2) (ρ is sheet resistance and T is temperature), which shows different slopes and intersections at different magnetic fields, was observed experimentally in the low temperature range. The spin-dependent variable range hopping model has been proposed by taking into account the electron-electron Coulomb interaction and the spin-spin exchange interaction in the same frame, which can well describe the observed magnetic transport properties in Ti(1-x)Co(x)O(2) and Zn(1-x)Co(x)O magnetic semiconductors.

Unexpected Giant-Gap Quantum Spin Hall Insulator in Chemically Decorated Plumbene Monolayer.

Quantum spin Hall (QSH) effect of two-dimensional (2D) materials features edge states that are topologically protected from backscattering by time-reversal symmetry. However, the major obstacles to the application for QSH effect are the lack of suitable QSH insulators with a large bulk gap. Here, we predict a novel class of 2D QSH insulators in X-decorated plumbene monolayers (PbX; X = H, F, Cl, Br, I) with extraordinarily giant bulk gaps from 1.03 eV to a record value of 1.34 eV. The topological characteristic of PbX mainly originates from s-p(x,y) band inversion related to the lattice symmetry, while the effect of spin-orbital coupling (SOC) is only to open up a giant gap. Their QSH states are identified by nontrivial topological invariant Z2 = 1, as well as a single pair of topologically protected helical edge states locating inside the bulk gap. Noticeably, the QSH gaps of PbX are tunable and robust via external strain. We also propose high-dielectric-constant BN as an ideal substrate for the experimental realization of PbX, maintaining its nontrivial topology. These novel QSH insulators with giant gaps are a promising platform to enrich topological phenomena and expand potential applications at high temperature.

Functionalized Thallium Antimony Films as Excellent Candidates for Large-Gap Quantum Spin Hall Insulator.

Group III-V films are of great importance for their potential application in spintronics and quantum computing. Search for two-dimensional III-V films with a nontrivial large-gap are quite crucial for the realization of dissipationless transport edge channels using quantum spin Hall (QSH) effects. Here we use first-principles calculations to predict a class of large-gap QSH insulators in functionalized TlSb monolayers (TlSbX2; (X = H, F, Cl, Br, I)), with sizable bulk gaps as large as 0.22~0.40 eV. The QSH state is identified by Z2 topological invariant together with helical edge states induced by spin-orbit coupling (SOC). Noticeably, the inverted band gap in the nontrivial states can be effectively tuned by the electric field and strain. Additionally, these films on BN substrate also maintain a nontrivial QSH state, which harbors a Dirac cone lying within the band gap. These findings may shed new light in future design and fabrication of QSH insulators based on two-dimensional honeycomb lattices in spintronics.

Room Temperature Quantum Spin Hall Insulator in Ethynyl-Derivative Functionalized Stanene Films.

Quantum spin Hall (QSH) insulators feature edge states that topologically protected from backscattering. However, the major obstacles to application for QSH effect are the lack of suitable QSH insulators with a large bulk gap. Based on first-principles calculations, we predict a class of large-gap QSH insulators in ethynyl-derivative functionalized stanene (SnC2X; X = H, F, Cl, Br, I), allowing for viable applications at room temperature. Noticeably, the SnC2Cl, SnC2Br, and SnC2I are QSH insulators with a bulk gap of ~0.2 eV, while the SnC2H and SnC2F can be transformed into QSH insulator under the tensile strains. A single pair of topologically protected helical edge states is established for the edge of these systems with the Dirac point locating at the bulk gap, and their QSH states are confirmed with topological invariant Z2 = 1. The films on BN substrate also maintain a nontrivial large-gap QSH effect, which harbors a Dirac cone lying within the band gap. These findings may shed new light in future design and fabrication of large-gap QSH insulators based on two-dimensional honeycomb lattices in spintronics.

Stanene cyanide: a novel candidate of Quantum Spin Hall insulator at high temperature.

The search for quantum spin Hall (QSH) insulators with high stability, large and tunable gap and topological robustness, is critical for their realistic application at high temperature. Using first-principle calculations, we predict the cyanogen saturated stanene SnCN as novel topological insulators material, with a bulk gap as large as 203 meV, which can be engineered by applying biaxial strain and electric field. The band topology is identified by Z2 topological invariant together with helical edge states, and the mechanism is s-pxy band inversion at G point induced by spin-orbit coupling (SOC). Remarkably, these systems have robust topology against chemical impurities, based on the calculations on halogen and cyano group co-decorated stanene SnXxX'1-x (X,X' = F, Cl, Br, I and CN), which makes it an appropriate and flexible candidate material for spintronic devices.

Large rectification magnetoresistance in nonmagnetic Al/Ge/Al heterojunctions.

Magnetoresistance and rectification are two fundamental physical properties of heterojunctions and respectively have wide applications in spintronics devices. Being different from the well known various magnetoresistance effects, here we report a brand new large magnetoresistance that can be regarded as rectification magnetoresistance: the application of a pure small sinusoidal alternating-current to the nonmagnetic Al/Ge Schottky heterojunctions can generate a significant direct-current voltage, and this rectification voltage strongly varies with the external magnetic field. We find that the rectification magnetoresistance in Al/Ge Schottky heterojunctions is as large as 250% at room temperature, which is greatly enhanced as compared with the conventional magnetoresistance of 70%. The findings of rectification magnetoresistance open the way to the new nonmagnetic Ge-based spintronics devices of large rectification magnetoresistance at ambient temperature under the alternating-current due to the simultaneous implementation of the rectification and magnetoresistance in the same devices.

Electrical control of memristance and magnetoresistance in oxide magnetic tunnel junctions.

Electric-field control of magnetic and transport properties of magnetic tunnel junctions has promising applications in spintronics. Here, we experimentally demonstrate a reversible electrical manipulation of memristance, magnetoresistance, and exchange bias in Co/CoO-ZnO/Co magnetic tunnel junctions, which enables the realization of four nonvolatile resistance states. Moreover, greatly enhanced tunneling magnetoresistance of 68% was observed due to the enhanced spin polarization of the bottom Co/CoO interface. The ab initio calculations further indicate that the spin polarization of the Co/CoO interface is as high as 73% near the Fermi level and plenty of oxygen vacancies can induce metal-insulator transition of the CoO(1-v) layer. Thus, the electrical manipulation mechanism on the memristance, magnetoresistance and exchange bias can be attributed to the electric-field-driven migration of oxygen ions/vacancies between very thin CoO and ZnO layers.

Novel band structures in silicene on monolayer zinc sulfide substrate.

Opening a sizable band gap in the zero-gap silicene without lowering the carrier mobility is a key issue for its application in nanoelectronics. Based on first-principles calculations, we find that the interaction energies are in the range of -0.09‒0.3 eV per Si atom, indicating a weak interaction between silicene and ZnS monolayer and the ABZn stacking is the most stable pattern. The band gap of silicene can be effectively tuned ranging from 0.025 to 1.05 eV in silicene and ZnS heterobilayer (Si/ZnS HBL). An unexpected indirect-direct band gap crossover is also observed in HBLs, dependent on the stacking pattern, interlayer spacing and external strain effects on silicene. Interestingly, the characteristics of Dirac cone with a nearly linear band dispersion relation of silicene can be preserved in the ABS pattern which is a metastable state, accompanied by a small electron effective mass and thus the carrier mobility is expected not to degrade much. These provide a possible way to design effective FETs out of silicene on a ZnS monolayer.

Spin memristive magnetic tunnel junctions with CoO-ZnO nano composite barrier.

The spin memristive devices combining memristance and tunneling magnetoresistance have promising applications in multibit nonvolatile data storage and artificial neuronal computing. However, it is a great challenge for simultaneous realization of large memristance and magnetoresistance in one nanoscale junction, because it is very hard to find a proper spacer layer which not only serves as good insulating layer for tunneling magnetoresistance but also easily switches between high and low resistance states under electrical field. Here we firstly propose to use nanon composite barrier layers of CoO-ZnO to fabricate the spin memristive Co/CoO-ZnO/Co magnetic tunnel junctions. The bipolar resistance switching ratio is high up to 90, and the TMR ratio of the high resistance state gets to 8% at room temperature, which leads to three resistance states. The bipolar resistance switching is explained by the metal-insulator transition of CoO(1-v) layer due to the migration of oxygen ions between CoO(1-v) and ZnO(1-v).