The impact of negative mood state on sleep-related attentional bias in insomnia.

Sleep-related attentional bias is thought to play a role in the maintenance of insomnia. However, this concept has been questioned by several studies that did not show the presence of sleep-related attentional bias in clinical insomnia or poor sleepers. Our goal in the present study was to test whether the mood state of individuals with insomnia affects the presence of sleep-related attentional bias. To this end, 31 individuals with insomnia and 34 good sleepers were randomly assigned to a negative mood-inducing condition or a control condition. They then completed a visual probe task with three types of pictorial stimuli (general threat, sleep-related negative pictures and sleep-related positive pictures). Vigilance, maintenance and the overall bias indexes were calculated based on the reaction time. We found individuals with insomnia only showed a greater overall bias compared with good sleepers following a negative mood induction, regardless of the pictures presented. In addition, we found that a negative mood state was significantly correlated with the overall attentional bias in good sleepers but not in individuals with insomnia. These findings suggest that sleep-related attentional bias in insomnia can be modulated by mood state. This effect may reflect the dysregulation of top-down attentional control in individuals with insomnia.

Identification of novel bifunctional HIV-1 reverse transcriptase inhibitors.

OBJECTIVES: The increasing prevalence of mutations in HIV-1 reverse transcriptase (RT) that confer resistance to existing NRTIs and NNRTIs underscores the need to develop RT inhibitors with novel mode-of-inhibition and distinct resistance profiles. METHODS: Biochemical assays were employed to identify inhibitors of RT activity and characterize their mode of inhibition. The antiviral activity of the inhibitors was assessed by cell-based assays using laboratory HIV-1 isolates and MT4 cells. RT variants were purified via avidin affinity columns. RESULTS: Compound A displayed equal or greater potency against many common NNRTI-resistant RTs (K103N and Y181C RTs) relative to WT RT. Despite possessing certain NNRTI-like properties, such as being unable to inhibit an engineered variant of RT lacking an NNRTI-binding pocket, we found that compound A was dependent on Mg2+ for binding to RT. Optimization of compound A led to more potent analogues, which retained similar activities against WT and K103N mutant viruses with submicromolar potency in a cell-based assay. One of the analogues, compound G, was crystallized in complex with RT and the structure was determined at 2.6 Å resolution. The structure indicated that compound G simultaneously interacts with the active site (Asp186), the highly conserved primer grip region (Leu234 and Trp229) and the NNRTI-binding pocket (Tyr188). CONCLUSIONS: These findings reveal a novel class of RT bifunctional inhibitors that are not sensitive to the most common RT mutations, which can be further developed to address the deficiency of current RT inhibitors.

Parallel patterning of SiO2 wafer via near-field electrospinning of metallic salts and polymeric solution mixtures.

This paper describes a near-field electrospinning technique combined with heat treatment process used to directly align parallel metal oxide and metal nitride fibers on silicon dioxide substrate. The effects of near-field electrospinning parameters (including collector-to-needle distance, applied voltage and the moving speed of the collector) on the morphology of the resulted fibers have been studied. Metallic salt-contained precursor fibers are individually aligned via near-field electrospinning of metallic salts and polymeric solution mixtures. After applying calcination process to these well aligned precursor fibers, patterning by metal oxide and metal nitride fibers such as ZnO, Ga2O3, TiO2, GaN and TiN is successfully obtained. The optical microscope images and the scanning electron microscopy show the presence of fiber patterns, whose crystalline structure is characterized by x-ray diffraction and Raman spectroscopy measurement. The results demonstrate the potential of this approach for assembling ceramic fibers into parallel arrays with controllable orientation and position.

Discovery of pyrazolopyrimidine phosphodiesterase 10A inhibitors for the treatment of schizophrenia.

Herein, we present the identification of a novel class of pyrazolopyrimidine phosphodiesterase 10A (PDE10A) inhibitors. Beginning with a lead molecule (1) identified through a fragment-based drug discovery (FBDD) effort, lead optimization was enabled by rational design, X-ray crystallography, metabolic and off-target profiling, and fragment scaffold-hopping. We highlight the discovery of PyP-1, a potent, highly selective, and orally bioavailable pyrazolopyrimidine inhibitor of PDE10A. PyP-1 exhibits sub-nanomolar potency (PDE10A Ki=0.23nM), excellent pharmacokinetic (PK) and physicochemical properties, and a clean off-target profile. It displays dose-dependent efficacy in numerous pharmacodynamic (PD) assays that measure potential for anti-psychotic activity and cognitive improvement. PyP-1 also has a clean preclinical profile with respect to cataleptic potential in rats, prolactin secretion, and weight gain, common adverse events associated with currently marketed therapeutics. Further, PyP-1 displays in vivo preclinical target engagement as measured by PET enzyme occupancy in concert with [(11)C]MK-8193, a novel PDE10A PET tracer.

Structure-activity-relationship of amide and sulfonamide analogs of omarigliptin.

A series of novel substituted-[(3R)-amino-2-(2,5-difluorophenyl)]tetrahydro-2H-pyran analogs have been prepared and evaluated as potent, selective and orally active DPP-4 inhibitors. These efforts lead to the discovery of a long acting DPP-4 inhibitor, omarigliptin (MK-3102), which recently completed phase III clinical development and has been approved in Japan.

Discovery of [¹¹C]MK-8193 as a PET tracer to measure target engagement of phosphodiesterase 10A (PDE10A) inhibitors.

Phosphodiesterase 10A (PDE10A) inhibition has recently been identified as a potential mechanism to treat multiple symptoms that manifest in schizophrenia. In order to facilitate preclinical development and support key proof-of-concept clinical trials of novel PDE10A inhibitors, it is critical to discover positron emission tomography (PET) tracers that enable plasma concentration/PDE10A occupancy relationships to be established across species with structurally diverse PDE10A inhibitors. In this Letter, we describe how a high-throughput screening hit was optimized to provide [(11)C]MK-8193 (8j), a PET tracer that supports the determination of plasma concentration/PDE10A occupancy relationships for structurally diverse series of PDE10A inhibitors in both rat and rhesus monkey.

In vitro characterization of MK-1439, a novel HIV-1 nonnucleoside reverse transcriptase inhibitor.

Nonnucleoside reverse transcriptase inhibitors (NNRTIs) are a mainstay of therapy for treating human immunodeficiency type 1 virus (HIV-1)-infected patients. MK-1439 is a novel NNRTI with a 50% inhibitory concentration (IC50) of 12, 9.7, and 9.7 nM against the wild type (WT) and K103N and Y181C reverse transcriptase (RT) mutants, respectively, in a biochemical assay. Selectivity and cytotoxicity studies confirmed that MK-1439 is a highly specific NNRTI with minimum off-target activities. In the presence of 50% normal human serum (NHS), MK-1439 showed excellent potency in suppressing the replication of WT virus, with a 95% effective concentration (EC95) of 20 nM, as well as K103N, Y181C, and K103N/Y181C mutant viruses with EC95 of 43, 27, and 55 nM, respectively. MK-1439 exhibited similar antiviral activities against 10 different HIV-1 subtype viruses (a total of 93 viruses). In addition, the susceptibility of a broader array of clinical NNRTI-associated mutant viruses (a total of 96 viruses) to MK-1439 and other benchmark NNRTIs was investigated. The results showed that the mutant profile of MK-1439 was superior overall to that of efavirenz (EFV) and comparable to that of etravirine (ETR) and rilpivirine (RPV). Furthermore, E138K, Y181C, and K101E mutant viruses that are associated with ETR and RPV were susceptible to MK-1439 with a fold change (FC) of <3. A two-drug in vitro combination study indicated that MK-1439 acts nonantagonistically in the antiviral activity with each of 18 FDA-licensed drugs for HIV infection. Taken together, these in vitro data suggest that MK-1439 possesses the desired properties for further development as a new antiviral agent.

Discovery of MK-1439, an orally bioavailable non-nucleoside reverse transcriptase inhibitor potent against a wide range of resistant mutant HIV viruses.

The optimization of a novel series of non-nucleoside reverse transcriptase inhibitors (NNRTI) led to the identification of pyridone 36. In cell cultures, this new NNRTI shows a superior potency profile against a range of wild type and clinically relevant, resistant mutant HIV viruses. The overall favorable preclinical pharmacokinetic profile of 36 led to the prediction of a once daily low dose regimen in human. NNRTI 36, now known as MK-1439, is currently in clinical development for the treatment of HIV infection.

Self-objectification and cosmetic surgery consideration among Chinese young women: The mediating roles of alienation and body image inflexibility.

The behavior of undergoing cosmetic surgery is a coping strategy for body-image threats and challenges. Self-objectification is associated with alienation and body image inflexibility, and all of these are associated with stronger cosmetic surgery considerations. This study evaluated the relationship between self-objectification and cosmetic surgery consideration, and whether this relationship was mediated by alienation and body image inflexibility. The participants were 650 Chinese female college students. Serial mediation analysis indicated that the relationship between self-objectification and cosmetic surgery consideration was significantly mediated by alienation followed by body image inflexibility. The total mediating effect value was 0.424, accounting for 57.5% of the total effects. These results suggest that reducing alienation and improving the flexibility of body image can reduce the influence of self-objectification on young women's willingness to undergo cosmetic surgery. These findings provide a basis for intervening or preventing the self-objectified young women's willingness for cosmetic surgery.

Effects of Internal Stress and Hydrogen Penetration on the Performance of Er2O3 Coatings as Hydrogen Permeation Barriers.

Ceramic coatings that can effectively prevent hydrogen permeation have a wide range of applications in hydrogen energy and nuclear fusion reactors. In this study, for the first time, the internal stress of Er2O3 coatings was found to be a key factor that could determine their hydrogen permeation resistance and lifespan. The internal stress was controlled by designing layered Er2O3 coatings. The internal stress increased with an increasing number of Er2O3 layers. When the number of layers was below 15, the increased internal stress did not adversely affect the coating performance and might help to increase its hydrogen permeation resistance. Although the overall thickness of the 15-layer Er2O3 coating was only 97 nm, its hydrogen permeation reduction factor (PRF) reached the highest value of 626, whereas a further increase in the internal stress detrimentally affected the ability of the coating to reduce hydrogen permeation. In addition, the experimental observations and simulation results revealed that the performance of the Er2O3 coatings was related to the hydrogen atoms that penetrated the coating, which weakened the Er-O bonds and consequently decreased the Er2O3 fracture limit. This study provides insights into the effects of internal stress and hydrogen penetration on the performance of ceramic coatings as hydrogen permeation barriers and will help guide strategies for the structure design of hydrogen permeation barriers possessing high PRFs and long lifespans.

Prescribing practices in opioid agonist treatment and changes in compliance to clinical dosing guidelines in British Columbia, Canada.

BACKGROUND AND AIM: In British Columbia, Canada, clinical guidelines for the treatment of opioid use disorders (OUD) were updated in 2017, during a period in which the potency and composition of the illicit drug supply changed rapidly. We aimed to describe changes in opioid agonist treatment (OAT) prescribing practices at the population level in a setting in which fentanyl and its analogs have become the primary illicit opioid of use. DESIGN, SETTING AND PARTICIPANTS: This was a population-based retrospective cohort study using three linked health administrative databases in British Columbia (BC), Canada. All individuals with at least one OAT dispensation in BC between 1 January 2014 and 31 August 2021 took part. MEASUREMENTS: To assess changes in OAT prescribing practices over time, we calculated initiation doses, dose titration intervals, maintenance doses and take-home dosing intervals stratified by medication [methadone, buprenorphine-naloxone and slow-release oral morphine (SROM)] according to recommended guidelines. FINDINGS: A total of 265 410 OAT episodes (57.5% on methadone, 34.5% on buprenorphine-naloxone and 8.0% on SROM) were initiated during the study period. Compared with the guideline recommendation, observed initiation doses were higher among all medications from 2014 (2017 for SROM) to 2021 (buprenorphine-naloxone: 14-29%; methadone: 53-66%; SROM: 26-55%). Titration intervals were shorter for all medications, consistent with guidelines for buprenorphine-naloxone (26-49%), but shorter than recommended for methadone or SROM (28-51% and 12-41%, respectively). Higher maintenance dosing was observed for methadone (68-78%) and SROM (3-21%). Take-home allowances extending beyond the recommended guideline length increased across medications (buprenorphine-naloxone: 18-35%; methadone: 50-64%; SROM: 34-39%). Changes in prescribing patterns were similar for first-time OAT initiators. CONCLUSION: In British Columbia, Canada, from 2014 to 2021, prescribers of opioid agonist treatment (OAT) appeared to initiate both new and experienced OAT clients at higher doses than guideline recommendations, titrate them more rapidly and maintain clients at higher doses. Take-home dose allowances also gradually increased.

Genetic and pharmacological inhibition of PDK1 in cancer cells: characterization of a selective allosteric kinase inhibitor.

Phosphoinositide-dependent kinase 1 (PDK1) is a critical activator of multiple prosurvival and oncogenic protein kinases and has garnered considerable interest as an oncology drug target. Despite progress characterizing PDK1 as a therapeutic target, pharmacological support is lacking due to the prevalence of nonspecific inhibitors. Here, we benchmark literature and newly developed inhibitors and conduct parallel genetic and pharmacological queries into PDK1 function in cancer cells. Through kinase selectivity profiling and x-ray crystallographic studies, we identify an exquisitely selective PDK1 inhibitor (compound 7) that uniquely binds to the inactive kinase conformation (DFG-out). In contrast to compounds 1-5, which are classical ATP-competitive kinase inhibitors (DFG-in), compound 7 specifically inhibits cellular PDK1 T-loop phosphorylation (Ser-241), supporting its unique binding mode. Interfering with PDK1 activity has minimal antiproliferative effect on cells growing as plastic-attached monolayer cultures (i.e. standard tissue culture conditions) despite reduced phosphorylation of AKT, RSK, and S6RP. However, selective PDK1 inhibition impairs anchorage-independent growth, invasion, and cancer cell migration. Compound 7 inhibits colony formation in a subset of cancer cell lines (four of 10) and primary xenograft tumor lines (nine of 57). RNAi-mediated knockdown corroborates the PDK1 dependence in cell lines and identifies candidate biomarkers of drug response. In summary, our profiling studies define a uniquely selective and cell-potent PDK1 inhibitor, and the convergence of genetic and pharmacological phenotypes supports a role of PDK1 in tumorigenesis in the context of three-dimensional in vitro culture systems.

Antiviral activity and in vitro mutation development pathways of MK-6186, a novel nonnucleoside reverse transcriptase inhibitor.

MK-6186 is a novel nonnucleoside reverse transcriptase inhibitor (NNRTI) which displays subnanomolar potency against wild-type (WT) virus and the two most prevalent NNRTI-resistant RT mutants (K103N and Y181C) in biochemical assays. In addition, it showed excellent antiviral potency against K103N and Y181C mutant viruses, with fold changes (FCs) of less than 2 and 5, respectively. When a panel of 12 common NNRTI-associated mutant viruses was tested with MK-6186, only 2 relatively rare mutants (Y188L and V106I/Y188L) were highly resistant, with FCs of >100, and the remaining viruses showed FCs of <10. Furthermore, a panel of 96 clinical virus isolates with NNRTI resistance mutations was evaluated for susceptibility to NNRTIs. The majority (70%) of viruses tested displayed resistance to efavirenz (EFV), with FCs of >10, whereas only 29% of the mutant viruses displayed greater than 10-fold resistance to MK-6186. To determine whether MK-6186 selects for novel resistance mutations, in vitro resistance selections were conducted with one isolate each from subtypes A, B, and C under low-multiplicity-of-infection (MOI) conditions. The results showed a unique mutation development pattern in which L234I was the first mutation to emerge in the majority of the experiments. In resistance selection under high-MOI conditions with subtype B virus, V106A was the dominant mutation detected in the breakthrough viruses. More importantly, mutant viruses selected by MK-6186 showed FCs of <10 against EFV or etravirine (ETR), and the mutant viruses containing mutations selected by EFV or ETR were sensitive to MK-6186 (FCs of <10).

Discovery of tetrahydropyridopyrimidine phosphodiesterase 10A inhibitors for the treatment of schizophrenia.

We describe the discovery of potent and orally bioavailable tetrahydropyridopyrimidine inhibitors of phosphodiesterase 10A by systematic optimization of a novel HTS lead. Lead compound THPP-1 exhibits nanomolar potencies, excellent pharmacokinetic properties, and a clean off-target profile. It displays in vivo target engagement as measured by increased rat striatal cGMP levels upon oral dosing. It shows dose-dependent efficacy in a key pharmacodynamic assay predictive of antipsychotic activity, the psychostimulant-induced rat hyperlocomotion assay. Further, THPP-1 displays significantly fewer preclinical adverse events in assays measuring prolactin secretion, catalepsy, and weight gain, in contrast to the typical and atypical antipsychotics haloperidol and olanzapine.

Acid-Assisted Ball Mill Synthesis of Carboxyl-Functional-Group-Modified Prussian Blue as Sodium-Ion Battery Cathode.

Prussian blue attracts the attention of many researchers as a promising candidate for use in sodium-ion battery cathodes due to its open frameworks and high working potential. However, the interstitial water in its crystal structure and its poor electronic conductivity limits its performance in practical sodium-ion batteries. Here, acid-assisted ball milling synthesis was employed as a versatile method for the production of surface-modified Prussian blue. With (CH3COO)2Fe being used as the raw material, the Prussian blue produced using ball milling synthesis was modified by the carboxyl functional group on its surface, which resulted in lower interstitial water content and enhanced electrochemical cycling performance. In addition, ball milling synthesis provided the as-prepared Prussian blue with a large surface area, improving its electrochemical rate performance. When used as the cathode of sodium-ion batteries, as-prepared Prussian blue delivered a specific capacity of 145.3 mAh g-1 at 0.2 C and 113.7 mAh g-1 at 1 C, maintaining 54.5% of the initial capacity after 1000 cycles at 1 C (1 C = 170 mA g-1). Furthermore, a solid-state sodium-ion battery was mounted, with as-prepared Prussian blue being employed as the cathode and Na metal as the anode, which delivered a high specific capacity of 128.7 mAh g-1 at 0.2 C. The present study put forward an effective solution to overcome the limitations of Prussian blue for its commercial application.

From Mo-Si-B to Mo-Ti-Si-B Alloys: A Short Review.

Mo-Si-B alloys have attracted considerable research interest during the last several decades due to their high melting points, excellent high-temperature strength and relatively good oxidation resistance. However, insufficient room-temperature fracture toughness and high-temperature oxidation resistance restrain their further application. Generally, a sufficient volume fraction of BCC-Mo solid-solution phase, providing the ductility, and a high Si content, responsible for the formation of passive oxide scales, is difficult to achieve simultaneously in this ternary system. Recently, macroalloying of Ti has been proposed to establish a novel phase equilibrium with a combination of enough BCC phase and intermetallic compounds that contain a large amount of Si. In this article, the development history from the ternary Mo-Si-B to the quaternary Mo-Ti-Si-B system was reviewed. It was found that the constitution phases could be easily tailored by changing the Ti content. In this regard, better performance of mechanical properties and oxidation resistance can be obtained through proper alloy design. In-depth understanding of the advantages of the quaternary alloys over their ternary ancestors may contribute to bringing about a new concept in designing novel ultra-high-temperature structural materials.

Structural basis for the inhibition of RNase H activity of HIV-1 reverse transcriptase by RNase H active site-directed inhibitors.

HIV/AIDS continues to be a menace to public health. Several drugs currently on the market have successfully improved the ability to manage the viral burden in infected patients. However, new drugs are needed to combat the rapid emergence of mutated forms of the virus that are resistant to existing therapies. Currently, approved drugs target three of the four major enzyme activities encoded by the virus that are critical to the HIV life cycle. Although a number of inhibitors of HIV RNase H activity have been reported, few inhibit by directly engaging the RNase H active site. Here, we describe structures of naphthyridinone-containing inhibitors bound to the RNase H active site. This class of compounds binds to the active site via two metal ions that are coordinated by catalytic site residues, D443, E478, D498, and D549. The directionality of the naphthyridinone pharmacophore is restricted by the ordering of D549 and H539 in the RNase H domain. In addition, one of the naphthyridinone-based compounds was found to bind at a second site close to the polymerase active site and non-nucleoside/nucleotide inhibitor sites in a metal-independent manner. Further characterization, using fluorescence-based thermal denaturation and a crystal structure of the isolated RNase H domain reveals that this compound can also bind the RNase H site and retains the metal-dependent binding mode of this class of molecules. These structures provide a means for structurally guided design of novel RNase H inhibitors.

Design and synthesis of pyridone inhibitors of non-nucleoside reverse transcriptase.

Next generation NNRTIs are sought which possess both broad spectrum antiviral activity against key mutant strains and a high genetic barrier to the selection of new mutant viral strains. Pyridones were evaluated as an acyclic conformational constraint to replace the aryl ether core of MK-4965 (1) and the more rigid indazole constraint of MK-6186 (2). The resulting pyridone compounds are potent inhibitors of HIV RT and have antiviral activity in cell culture that is superior to other next generation NNRTI's.

Self-induced cobalt-derived hollow structure Prussian blue as a cathode for sodium-ion batteries.

As advanced electrode materials for sodium ion batteries, Prussian blue and its derivatives have attracted considerable attention due to their low cost, structural stability and facile synthesis process. However, the application of commercially available Prussian blue is limited by its poor electronic conductivity as well as the structural defect induced by crystalline/interstitial water molecules. Herein, to address these drawbacks, an etching-agent free method is developed to synthesize Prussian blue with a hollow structure, and the synthesis mechanism is revealed. Owing to the stability of divalent iron ions, the shorter electron/ion diffusion pathway and fewer defect sites of the hollow structure, the obtained Prussian blue exhibits excellent electrochemical performance (specific capacity of 133.6 mA h g-1 at 1C, 1C = 170 mA g-1), which can put forward a new avenue to engineer advanced electrode materials for sodium ion batteries.

In situ polyaniline coating of Prussian blue as cathode material for sodium-ion battery.

Prussian blue (PB) has great potential for use as a sodium cathode material owing to its high working potential and cube frame structure. Herein, this work reports a two-step method to synthesize PB with ascorbic acid as the ball-milling additive, which improves the electrochemical rate performance of PB during the traditional co-precipitation method. The obtained PB sample exhibited a superior specific capability (113.3 mAh g-1 even at 20 C, 1 C = 170 mA g-1) and a specific capacity retention of 84.8% after 100 cycles at 1 C rate. In order to enhance the cycling performance of the PB, an in situ polyaniline coating strategy was employed in which aniline was added into the electrolyte and polymerized under electrochemical conditions. The coated anode exhibited a high specific capacity retention of 62.7% after 500 cycles, which is significantly higher than that of the non-coated sample, which only remains 40.1% after 500 cycles. This development has shown a great potential as a low-cost, high-performance and environment-friendly technology for large-scale industrial application of PB.