RESUMEN
Strontium titanate (STO), with a wide spectrum of emergent properties such as ferroelectricity and superconductivity, has received significant attention in the community of strongly correlated materials. In the strain-free STO film grown on the SrRuO3 buffer layer, the existing polar nanoregions can facilitate room-temperature ferroelectricity when the STO film thickness approaches 10 nm. Here we show that around this thickness scale, the freestanding STO films without the influence of a substrate show the tetragonal structure at room temperature, contrasting with the cubic structure seen in bulk form. The spectroscopic measurements reveal the modified Ti-O orbital hybridization that causes the Ti ion to deviate from its nominal 4+ valency (3d0 configuration) with excess delocalized 3d electrons. Additionally, the Ti ion in TiO6 octahedron exhibits an off-center displacement. The inherent symmetry lowering in ultrathin freestanding films offers an alternative way to achieve tunable electronic structures that are of paramount importance for future technological applications.
RESUMEN
Recently, perovskite (PV) oxides with ABO3 structures have attracted considerable interest from scientists owing to their functionality. In this study, CaFeOx is introduced to reveal the resistive switching properties and mechanism of oxygen vacancy transition in PV and brownmillerite (BM) structures. BM-CaFeO2.5 is grown on an Nb-STO conductive substrate epitaxially. CaFeOx exhibits excellent endurance and reliability. In addition, the CaFeOx also demonstrates an electroforming-free characteristic and multilevel resistance properties. To construct the switching mechanism, high-resolution transmission electron microscopy is used to observe the topotactic phase change in CaFeOx . In addition, scanning TEM and electron energy loss spectroscopy show the structural evolution and valence state variation of CaFeOx after the switching behavior. This study not only reveals the switching mechanism of CaFeOx , but also provides a PV oxide option for the dielectric material in resistive random-access memory (RRAM) devices.
RESUMEN
Controlling ferroic orders (ferroelectricity, ferromagnetism and ferroelasticity) by optical methods is a significant challenge due to the large mismatch in energy scales between the order parameter coupling strengths and the incident photons. Here, we demonstrate an approach to manipulate multiple ferroic orders in an epitaxial mixed-phase BiFeO3 thin film at ambient temperature via laser illumination. Phase-field simulations indicate that a light-driven flexoelectric effect allows the targeted formation of ordered domains. We also achieved precise sequential laser writing and erasure of different domain patterns, which demonstrates a deterministic optical control of multiferroicity at room temperature. As ferroic orders directly influence susceptibility and conductivity in complex materials, our results not only shed light on the optical control of multiple functionalities, but also suggest possible developments for optoelectronics and related applications.
RESUMEN
Photostriction, optical stimulus driven mechanical deformation in materials, provides a solution toward next-generation technology. Here, the giant photostriction (â¼2% change of lattice) of epitaxial strontium iridate (SrIrO3) films under illumination at room temperature is revealed via power-dependent Raman scattering, which is significantly larger as compared to conventional inorganic materials. The time scale and mechanism of this giant photostriction in SrIrO3 are further studied through time-resolved transient reflectivity measurements. The main mechanism is determined to be the electron-phonon coupling. In addition, we find that such an exotic behavior happens within few picoseconds and remains up to 107 cyclic on/off operations. The observation of giant photostriction in SrIrO3 films with superior endurance promises the advance of shape responsive solids that are sensitive to environmental stimuli, which could be widely utilized for multifunctional optoelectronics and optomechanical devices.
RESUMEN
The ability to switch the ferroelectric polarization using an electric field makes ferroelectrics attractive for application in nanodevices such as high-density memories. One of the major challenges impeding this application, however, has been known as "retention failure", which is a spontaneous process of polarization back-switching that can lead to data loss. This process is generally thought to be caused by the domain instability arising from interface boundary conditions and countered by defects, which can pin the domain wall and impede the back-switching. Here, using in situ transmission electron microscopy and atomic-scale scanning transmission electron microscopy, we show that the polarization retention failure can be induced by commonly observed nanoscale impurity defects in BiFeO3 thin films. The interaction between polarization and the defects can also lead to the stabilization of novel functional nanodomains with mixed-phase structures and head-to-head polarization configurations. Thus, defect engineering provides a new route for tuning properties of ferroelectric nanosystems.
RESUMEN
Mesocrystal, a new class of crystals as compared to conventional and well-known single crystals and polycrystalline systems, has captured significant attention in the past decade. Recent studies have been focused on the advance of synthesis mechanisms as well as the potential on device applications. In order to create further opportunities upon functional mesocrystals, we fabricated a self-assembled nanocomposite composed of magnetic CoFe2O4 mesocrystal in Sr-doped manganites. This combination exhibits intriguing structural and magnetic tunabilities. Furthermore, the antiferromagnetic coupling of the mesocrystal and matrix has induced an additional magnetic perturbation to spin-polarized electrons, resulting in a significantly enhanced magnetoresistance in the nanocomposite. Our work demonstrates a new thought toward the enhancement of intrinsic functionalities assisted by mesocrystals and advanced design of novel mesocrystal-embedded nanocomposites.
RESUMEN
Microscopy has been pivotal in improving the understanding of structure-function relationships at the nanoscale and is by now ubiquitous in most characterization labs. However, traditional microscopy operations are still limited largely by a human-centric click-and-go paradigm utilizing vendor-provided software, which limits the scope, utility, efficiency, effectiveness, and at times reproducibility of microscopy experiments. Here, a coupled software-hardware platform is developed that consists of a software package termed AEcroscopy (short for Automated Experiments in Microscopy), along with a field-programmable-gate-array device with LabView-built customized acquisition scripts, which overcome these limitations and provide the necessary abstractions toward full automation of microscopy platforms. The platform works across multiple vendor devices on scanning probe microscopes and electron microscopes. It enables customized scan trajectories, processing functions that can be triggered locally or remotely on processing servers, user-defined excitation waveforms, standardization of data models, and completely seamless operation through simple Python commands to enable a plethora of microscopy experiments to be performed in a reproducible, automated manner. This platform can be readily coupled with existing machine-learning libraries and simulations, to provide automated decision-making and active theory-experiment optimization to turn microscopes from characterization tools to instruments capable of autonomous model refinement and physics discovery.
RESUMEN
Understanding the magnetic and ferroelectric ordering of magnetoelectric multiferroic materials at the nanoscale necessitates a versatile imaging method with high spatial resolution. Here, soft X-ray ptychography is employed to simultaneously image the ferroelectric and antiferromagnetic domains in an 80 nm thin freestanding film of the room-temperature multiferroic BiFeO3 (BFO). The antiferromagnetic spin cycloid of period 64 nm is resolved by reconstructing the corresponding resonant elastic X-ray scattering in real space and visualized together with mosaic-like ferroelectric domains in a linear dichroic contrast image at the Fe L3 edge. The measurements reveal a near perfect coupling between the antiferromagnetic and ferroelectric ordering by which the propagation direction of the spin cycloid is locked orthogonally to the ferroelectric polarization. In addition, the study evinces both a preference for in-plane propagation of the spin cycloid and changes of the ferroelectric polarization by 71° between multiferroic domains in the epitaxial strain-free, freestanding BFO film. The results provide a direct visualization of the strong magnetoelectric coupling in BFO and of its fine multiferroic domain structure, emphasizing the potential of ptychographic imaging for the study of multiferroics and non-collinear magnetic materials with soft X-rays.
RESUMEN
Domain switching is crucial for achieving desired functions in ferroic materials that are used in various applications. Fast control of domains at sub-nanosecond timescales remains a challenge despite its potential for high-speed operation in random-access memories, photonic, and nanoelectronic devices. Here, ultrafast laser excitation is shown to transiently melt and reconfigure ferroelectric stripe domains in multiferroic bismuth ferrite on a timescale faster than 100 picoseconds. This dynamic behavior is visualized by picosecond- and nanometer-resolved X-ray diffraction and time-resolved X-ray diffuse scattering. The disordering of stripe domains is attributed to the screening of depolarization fields by photogenerated carriers resulting in the formation of charged domain walls, as supported by phase-field simulations. Furthermore, the recovery of disordered domains exhibits subdiffusive growth on nanosecond timescales, with a non-equilibrium domain velocity reaching up to 10 m s-1 . These findings present a new approach to image and manipulate ferroelectric domains on sub-nanosecond timescales, which can be further extended into other complex photoferroic systems to modulate their electronic, optical, and magnetic properties beyond gigahertz frequencies. This approach could pave the way for high-speed ferroelectric data storage and computing, and, more broadly, defines new approaches for visualizing the non-equilibrium dynamics of heterogeneous and disordered materials.
RESUMEN
In this study, direct observation of the evolution of electronic structures across complex oxide interfaces has been revealed in the LaAlO(3)/SrTiO(3) model system using cross-sectional scanning tunneling microscopy and spectroscopy. The conduction and valence band structures across the LaAlO(3)/SrTiO(3) interface are spatially resolved at the atomic level by measuring the local density of states. This study directly maps out the electronic reconstructions and a built-in electric field in the polar LaAlO(3) layer. Results also clearly reveal the band bending and the notched band structure in the SrTiO(3) adjacent to the interface.
RESUMEN
The photoactivity of nanoporous bismuth vanadate (BiVO4, BVO) photoanodes that were fabricated by a two-step process (electrodeposition and then thermal conversion) in photoelectrochemical (PEC) hydrogen (H2) evolution can be enhanced about 1.44-fold by improving the constitutive ratio of (111Ì ), (061), and (242Ì ) crystal facets. The PEC characterization was carried out to investigate the factors altering the performance, which revealed that the crystal facet modulation could improve the photoactivity of the BVO photoanodes. In addition, the orientation-controlled BVO thin-film electrodes are introduced as evidence that the present crystal facet modulation is the positive effect for BVO photoanodes in PEC. The investigation of energy band structures and interfacial charge carrier dynamics of the BVO photoanodes reveals that the crystal facet modulation could result in a shorter lifetime of charge carrier recombination and larger band bending at the interface between BVO and electrolytes. This outcome could improve the charge separation and charge transfer efficiencies of BVO photoanodes, promoting the efficiency of PEC H2 evolution. Moreover, this crystal facet modulation can combine with co-catalyst decoration to further improve the solar-to-hydrogen efficiency of BVO photoanodes in PEC. This study presents a potential strategy to promote the PEC activity by crystal facet modulation and important insights into the interfacial charge transfer properties of semiconductor photoelectrodes for the application in solar fuel generation.
RESUMEN
Antiferromagnetic spintronics is an emerging field of non-volatile data storage and information processing. The zero net magnetization and zero stray fields of antiferromagnetic materials eliminate interference between neighbor units, leading to high-density memory integrations. However, this invisible magnetic character at the same time also poses a great challenge in controlling and detecting magnetic states in antiferromagnets. Here, two antiferromagnetic spin states close in energy in strained BiFeO3 thin films at room temperature are discovered. It can be reversibly switched between these two non-volatile antiferromagnetic states by a moderate magnetic field and a non-contact optical approach. Importantly, the conductivity of the areas with each antiferromagnetic textures is drastically different. It is conclusively demonstrated the capability of optical writing and electrical reading of these newly discovered bistable antiferromagnetic states in the BiFeO3 thin films.
RESUMEN
Epitaxial growth is of significant importance over the past decades, given it has been the key process of modern technology for delivering high-quality thin films. For conventional heteroepitaxy, the selection of proper single crystal substrates not only facilitates the integration of different materials but also fulfills interface and strain engineering upon a wide spectrum of functionalities. Nevertheless, the lattice structure, regularity and crystalline orientation are determined once a specific substrate is chosen. Here, we reveal the growth of twisted oxide lateral homostructure with controllable in-plane conjunctions. The twisted lateral homostructures with atomically sharp interfaces can be composed of epitaxial "blocks" with different crystalline orientations, ferroic orders and phases. We further demonstrate that this approach is universal for fabricating various complex systems, in which the unconventional physical properties can be artificially manipulated. Our results establish an efficient pathway towards twisted lateral homostructures, adding additional degrees of freedom to design epitaxial films.
RESUMEN
We have presented a systematical study of the domain nucleation and growth behaviors in multiferroic BiFeO(3) (BFO) films. Both the ferroelectric and the ferroelastic switching dynamics were investigated. Several environmental parameters, including the polarization orientations, the monodomain-like matrix, and the ordered domain walls as local boundaries, were well controlled by thin-film strain engineering through changing the vicinal angles of the substrates. The tip-based domain dynamics was studied by subsequent piezoresponse force microscope (PFM) imaging of the domain evolution under external voltage pulses. For the nanodomains written in the monodomain-like environment, the domain wall performed the thermal activated motion. The as-grown 71° domain walls can act as pinning centers for the ferroelectric domain growth driven by low fields; moreover, ferroelastic nucleation near a 71° domain wall will cause the deformation of the domain wall. The ferroelastic domain growth possessed relatively small activation fields, and therefore usually performed non-activated motion. This study revealed the effects of local environments on the dynamics forming nanoscale domains, and opened a pathway for applications in novel non-volatile functional devices.
RESUMEN
We have successfully fabricated high quality single crystalline La0.7Sr0.3MnO3 (LSMO) film in the freestanding form that can be transferred onto silicon wafer and copper mesh support. Using soft x-ray absorption (XAS) and resonant inelastic x-ray scattering (RIXS) spectroscopy in transmission and reflection geometries, we demonstrate that the x-ray emission from Mn 3s-2p core-to-core transition (3sPFY) seen in the RIXS maps can represent the bulk-like absorption signal with minimal self-absorption effect around the Mn L3-edge. Similar measurements were also performed on a reference LSMO film grown on the SrTiO3 substrate and the agreement between measurements substantiates the claim that the bulk electronic structures can be preserved even after the freestanding treatment process. The 3sPFY spectrum obtained from analyzing the RIXS maps offers a powerful way to probe the bulk electronic structures in thin films and heterostructures when recording the XAS spectra in the transmission mode is not available.
RESUMEN
Multiferroics-materials that exhibit coupled ferroic orders-are considered to be one of the most promising candidate material systems for next-generation spintronics, memory, low-power nanoelectronics and so on. To advance potential applications, approaches that lead to persistent and extremely fast functional property changes are in demand. Herein, it is revealed that the phase transition and the correlated ferroic orders in multiferroic BiFeO3 (BFO) can be modulated via illumination of single short/ultrashort light pulses. Heat transport simulations and ultrafast optical pump-probe spectroscopy reveal that the transient strain induced by light pulses plays a key role in determining the persistent final states. Having identified the diffusionless phase transformation features via scanning transmission electron microscopy, sequential laser pulse illumination is further demonstrated to perform large-area phase and domain manipulation in a deterministic way. The work contributes to all-optical and rapid nonvolatile control of multiferroicity, offering different routes while designing novel optoelectronics.
RESUMEN
Researchers have long been seeking multifunctional materials that can be adopted for next-generation nanoelectronics, and which, hopefully, are compatible with current semiconductor processing for further integration. Along this vein, complex oxides have gained numerous attention due to their versatile functionalities. Despite the fact that unbounded potential of complex oxides has been examined over the past years, one of the major challenges lies in the direct integration of these functional oxides onto existing devices or targeted substrates that are inherently incompatible in terms of oxide growth. To fulfill this goal, freestanding processes have been proposed, in which wet etching of inserted sacrificial layers is regarded as one of the most efficient ways to obtain epitaxial high-quality thin films. In this study, we propose using an alternative oxide, YBa2Cu3O7 (YCBO), as a sacrificial layer, which can be easily dissolved in light hydrochloric acid in a more efficient way, while protecting selected complex oxides intact. The high epitaxial quality of the selected complex oxide before and after freestanding process using YBCO as a sacrificial layer is comprehensively studied via a combination of atomic force microscopy, X-ray diffraction, transmission electron microscopy, and electrical transports. This approach enables direct integration of complex oxides with arbitrary substrates and devices and is expected to offer a faster route towards the development of low-dimensional quantum materials.
RESUMEN
Interest in bringing p- and n-type monolayer semiconducting transition metal dichalcogenides (TMD) into contact to form rectifying pn diode has thrived since it is crucial to control the electrical properties in two-dimensional (2D) electronic and optoelectronic devices. Usually this involves vertically stacking different TMDs with pn heterojunction or, laterally manipulating carrier density by gate biasing. Here, by utilizing a locally reversed ferroelectric polarization, we laterally manipulate the carrier density and created a WSe2 pn homojunction on the supporting ferroelectric BiFeO3 substrate. This non-volatile WSe2 pn homojunction is demonstrated with optical and scanning probe methods and scanning photoelectron micro-spectroscopy. A homo-interface is a direct manifestation of our WSe2 pn diode, which can be quantitatively understood as a clear rectifying behavior. The non-volatile confinement of carriers and associated gate-free pn homojunction can be an addition to the 2D electron-photon toolbox and pave the way to develop laterally 2D electronics and photonics.
RESUMEN
Ferroelectric domain walls have continued to attract widespread attention due to both the novelty of the phenomena observed and the ability to reliably pattern them in nanoscale dimensions. However, the conductivity mechanisms remain in debate, particularly around nominally uncharged walls. Here, we posit a conduction mechanism relying on field-modification effect from polarization re-orientation and the structure of the reverse-domain nucleus. Through conductive atomic force microscopy measurements on an ultra-thin (001) BiFeO3 thin film, in combination with phase-field simulations, we show that the field-induced twisted domain nucleus formed at domain walls results in local-field enhancement around the region of the atomic force microscope tip. In conjunction with slight barrier lowering, these two effects are sufficient to explain the observed emission current distribution. These results suggest that different electronic properties at domain walls are not necessary to observe localized enhancement in domain wall currents.